From 8ca355ce2fb55b6754689534d40248afe9b2001b Mon Sep 17 00:00:00 2001 From: kb0iic Date: Fri, 22 Jun 2018 21:00:36 -0500 Subject: Create a 76mm x 106mm 5x7 common cathode row dot matrix display with 5mm LED's following the LTP747 pinout. --- eagle/5x7 Display/5x7_5mm_Cathode_Row_4inch.gpi | 41 +++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 eagle/5x7 Display/5x7_5mm_Cathode_Row_4inch.gpi (limited to 'eagle/5x7 Display/5x7_5mm_Cathode_Row_4inch.gpi') diff --git a/eagle/5x7 Display/5x7_5mm_Cathode_Row_4inch.gpi b/eagle/5x7 Display/5x7_5mm_Cathode_Row_4inch.gpi new file mode 100644 index 0000000..1334337 --- /dev/null +++ b/eagle/5x7 Display/5x7_5mm_Cathode_Row_4inch.gpi @@ -0,0 +1,41 @@ +Generated by EAGLE CAM Processor 9.0.1 + +Photoplotter Info File: C:/Users/984232/Documents/eagle_cad/eagle/5x7 Display/5x7_5mm_Cathode_Row_4inch.gpi + + Date : 6/22/2018 11:58 + Plotfile : C:/Users/984232/Documents/eagle_cad/eagle/5x7 Display/5x7_5mm_Cathode_Row_4inch.GTL + Apertures : generated: + Device : Gerber RS-274-X photoplotter, coordinate format 2.5 inch + +Parameter settings: + + Emulate Apertures : no + Tolerance Draw + : 0.00 % + Tolerance Draw - : 0.00 % + Tolerance Flash + : 0.00 % + Tolerance Flash - : 0.00 % + Rotate : no + Mirror : no + Optimize : yes + Auto fit : yes + OffsetX : 0inch + OffsetY : 0inch + +Plotfile Info: + + Coordinate Format : 2.5 + Coordinate Units : Inch + Data Mode : Absolute + Zero Suppression : None + End Of Block : * + +Apertures used: + + Code Shape Size used + + D10 draw 0.0000inch 4 + D11 square 0.0660inch 35 + D12 octagon 0.0660inch 35 + D13 draw 0.0600inch 22 + D14 draw 0.0240inch 164 + -- cgit v1.2.3-54-g00ecf