From 5851c4758d3301851cf58e0ec3b42c7f93c7ca77 Mon Sep 17 00:00:00 2001 From: William Harrington Date: Thu, 17 May 2018 20:54:06 -0500 Subject: Populate repository from main eagle directory in user's document library. --- eagle/Arduino_TLC5940/4in7Segment_Passthrough.gpi | 41 +++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100755 eagle/Arduino_TLC5940/4in7Segment_Passthrough.gpi (limited to 'eagle/Arduino_TLC5940/4in7Segment_Passthrough.gpi') diff --git a/eagle/Arduino_TLC5940/4in7Segment_Passthrough.gpi b/eagle/Arduino_TLC5940/4in7Segment_Passthrough.gpi new file mode 100755 index 0000000..78ac5e1 --- /dev/null +++ b/eagle/Arduino_TLC5940/4in7Segment_Passthrough.gpi @@ -0,0 +1,41 @@ +Generated by EAGLE CAM Processor 9.0.1 + +Photoplotter Info File: C:/Users/kb0iic/Documents/eagle/Arduino_TLC5940/4in7Segment_Passthrough.gpi + + Date : 5/9/2018 21:19 + Plotfile : C:/Users/kb0iic/Documents/eagle/Arduino_TLC5940/4in7Segment_Passthrough.GTL + Apertures : generated: + Device : Gerber RS-274-X photoplotter, coordinate format 2.5 inch + +Parameter settings: + + Emulate Apertures : no + Tolerance Draw + : 0.00 % + Tolerance Draw - : 0.00 % + Tolerance Flash + : 0.00 % + Tolerance Flash - : 0.00 % + Rotate : no + Mirror : no + Optimize : yes + Auto fit : yes + OffsetX : 0inch + OffsetY : 0inch + +Plotfile Info: + + Coordinate Format : 2.5 + Coordinate Units : Inch + Data Mode : Absolute + Zero Suppression : None + End Of Block : * + +Apertures used: + + Code Shape Size used + + D10 draw 0.0000inch 8 + D11 draw 0.0600inch 50 + D12 draw 0.0040inch 7267 + D13 draw 0.0060inch 81 + D14 round 0.0270inch 5 + -- cgit v1.2.3-54-g00ecf