Maxim Components <author>Created by librarian@cadsoft.de</author> Dual In Line Package 0.3 inch >NAME >VALUE >NAME >VALUE LED DISPLAY DRIVER Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL Resistors, Capacitors, Inductors Based on the previous libraries: <ul> <li>r.lbr <li>cap.lbr <li>cap-fe.lbr <li>captant.lbr <li>polcap.lbr <li>ipc-smd.lbr </ul> All SMD packages are defined according to the IPC specifications and CECC <author>Created by librarian@cadsoft.de</author> for Electrolyt Capacitors see also : www.bccomponents.com www.panasonic.com www.kemet.com http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf (SANYO) for trimmer refence see : www.electrospec-inc.com/cross_references/trimpotcrossref.asp <table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0> <tr valign="top"> <! <td width="10"> </td> <td width="90%"> TRIM-POT CROSS REFERENCE <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> <TR> <TD COLSPAN=8> RECTANGULAR MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURNS </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD><TD> </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3005P 3006P 3006W 3006Y 3009P 3009W 3009Y 3057J 3057L 3057P 3057Y 3059J 3059L 3059P 3059Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 89P 89W 89X 89PH 76P 89XH 78SLT 78L ALT 56P ALT 78P ALT T8S 78L 56P 78P </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - T18/784 783 781 - - - 2199 1697/1897 1680/1880 2187 - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 8035EKP/CT20/RJ-20P - RJ-20X - - - 1211L 8012EKQ ALT 8012EKR ALT 1211P 8012EKJ 8012EKL 8012EKQ 8012EKR </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 2101P 2101W 2101Y - - - - - - - - 2102L 2102S 2102Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVMCOG - - - - - - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 43P 43W 43Y - - - - 40L 40P 40Y 70Y-T602 70L 70P 70Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - RT/RTR12 RT/RTR12 RT/RTR12 - RJ/RJR12 RJ/RJR12 RJ/RJR12 </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SQUARE MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3250L 3250P 3250W 3250X 3252P 3252W 3252X 3260P 3260W 3260X 3262P 3262W 3262X 3266P 3266W 3266X 3290H 3290P 3290W 3292P 3292W 3292X 3296P 3296W 3296X 3296Y 3296Z 3299P 3299W 3299X 3299Y 3299Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 66P ALT 66W ALT 66X ALT 66P ALT 66W ALT 66X ALT - 64W ALT - 64P ALT 64W ALT 64X ALT 64P 64W 64X 66X ALT 66P ALT 66W ALT 66P 66W 66X 67P 67W 67X 67Y 67Z 68P 68W 68X 67Y ALT 67Z ALT </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 5050 5091 5080 5087 - - - - - - - T63YB T63XB - - - 5887 5891 5880 - - - T93Z T93YA T93XA T93YB T93XB - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 8026EKP 8026EKW 8026EKM 8026EKP 8026EKB 8026EKM 1309X 1309P 1309W 8024EKP 8024EKW 8024EKN RJ-9P/CT9P RJ-9W RJ-9X - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 3103P 3103Y 3103Z 3103P 3103Y 3103Z - - - - - - 3105P/3106P 3105W/3106W 3105X/3106X 3105Y/3106Y 3105Z/3105Z 3102P 3102W 3102X 3102Y 3102Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - - - - - - - - - - - - - EVMCBG EVMCCG - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 55-1-X 55-4-X 55-3-X 55-2-X - - - - - - - - - - - - 50-2-X 50-4-X 50-3-X - - - 64P 64W 64X 64Y 64Z - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> RT/RTR22 RT/RTR22 RT/RTR22 RT/RTR22 RJ/RJR22 RJ/RJR22 RJ/RJR22 RT/RTR26 RT/RTR26 RT/RTR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RT/RTR24 RT/RTR24 RT/RTR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 - - - - - - - </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SINGLE TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3323P 3323S 3323W 3329H 3329P 3329W 3339H 3339P 3339W 3352E 3352H 3352K 3352P 3352T 3352V 3352W 3362H 3362M 3362P 3362R 3362S 3362U 3362W 3362X 3386B 3386C 3386F 3386H 3386K 3386M 3386P 3386S 3386W 3386X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 25P 25S 25RX 82P 82M 82PA - - - 91E 91X 91T 91B 91A 91V 91W 25W 25V 25P - 25S 25U 25RX 25X 72XW 72XL 72PM 72RX - 72PX 72P 72RXW 72RXL 72X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - T7YB T7YA - - - - - - - - - - - - TXD TYA TYP - TYD TX - 150SX 100SX 102T 101S 190T 150TX 101 - - 101SX </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ET6P ET6S ET6X RJ-6W/8014EMW RJ-6P/8014EMP RJ-6X/8014EMX TM7W TM7P TM7X - 8017SMS - 8017SMB 8017SMA - - CT-6W CT-6H CT-6P CT-6R - CT-6V CT-6X - - 8038EKV - 8038EKX - - 8038EKP 8038EKZ 8038EKW - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 3321H 3321P 3321N 1102H 1102P 1102T RVA0911V304A - RVA0911H413A RVG0707V100A RVA0607V(H)306A RVA1214H213A - - - - - - - - - 3104B 3104C 3104F 3104H - 3104M 3104P 3104S 3104W 3104X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> EVMQ0G EVMQIG EVMQ3G EVMS0G EVMQ0G EVMG0G - - - EVMK4GA00B EVM30GA00B EVMK0GA00B EVM38GA00B EVMB6 EVLQ0 - EVMMSG EVMMBG EVMMAG - - EVMMCS - - - - - EVMM1 - - EVMM0 - - EVMM3 </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 62-3-1 62-1-2 - - - - - - - - - - - 67R - 67P - - - - 67X 63V 63S 63M - - 63H 63P - - 63X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - RJ/RJR50 RJ/RJR50 RJ/RJR50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - </TD> </TR> </TABLE>   <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> <TR> <TD COLSPAN=7> SMD TRIM-POT CROSS REFERENCE MULTI-TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3224G 3224J 3224W 3269P 3269W 3269X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 44G 44J 44W 84P 84W 84X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST63Z ST63Y - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST5P ST5W ST5X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> </TR> <TR> <TD COLSPAN=7>  </TD> </TR> <TR> <TD COLSPAN=7> SINGLE TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3314G 3314J 3364A/B 3364C/D 3364W/X 3313G 3313J </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 23B 23A 21X 21W - 22B 22A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST5YL/ST53YL ST5YJ/5T53YJ ST-23A ST-22B ST-22 - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST-4B ST-4A - - - ST-3B ST-3A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVM-6YS EVM-1E EVM-1G EVM-1D - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> G4B G4A TR04-3S1 TRG04-2S1 - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - DVR-43A CVR-42C CVR-42A/C - - </TD> </TR> </TABLE> ALT = ALTERNATE   </td> </tr> </table> CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 3 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 4 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 6 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm + 5 mm, outline 2.4 x 7 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR Horizontal, grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 3.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 4.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 5.2 x 10.6 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 4.3 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 5.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 6.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 5.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 6.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 7.2 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 8.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 9.1 x 18.2 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 6.2 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 7.4 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 8.7 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 10.8 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 11.3 x 26.8 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 9.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 11.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 13.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 20.5 x 31.6 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 13.7 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 16.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 18.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 19.2 x 41.8 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 20.3 x 41.8 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 15.5 x 41.8 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 6.3 x 10.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 15.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 17.3 x 31.6 mm >NAME >VALUE Ceramic Chip Capacitor KEMET 0204 reflow solder Metric Code Size 1005 >NAME >VALUE Ceramic Chip Capacitor KEMET 0603 reflow solder Metric Code Size 1608 >NAME >VALUE Ceramic Chip Capacitor KEMET 0805 reflow solder Metric Code Size 2012 >NAME >VALUE Ceramic Chip Capacitor KEMET 1206 reflow solder Metric Code Size 3216 >NAME >VALUE Ceramic Chip Capacitor KEMET 1210 reflow solder Metric Code Size 3225 >NAME >VALUE Ceramic Chip Capacitor KEMET 1812 reflow solder Metric Code Size 4532 >NAME >VALUE Ceramic Chip Capacitor KEMET 1825 reflow solder Metric Code Size 4564 >NAME >VALUE Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650 >NAME >VALUE Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664 >NAME >VALUE Source: http://www.vishay.com/docs/10129/hpc0201a.pdf >NAME >VALUE Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf >NAME >VALUE CAPACITOR Source: AVX .. aphvc.pdf >NAME >VALUE CAPACITOR Source: AVX .. aphvc.pdf >NAME >VALUE TANTALUM CAPACITOR >NAME >VALUE TANTALUM CAPACITOR >NAME >VALUE TANTALUM CAPACITOR >NAME >VALUE TANTALUM CAPACITOR >NAME >VALUE ELECTROLYTIC CAPACITOR body 5 x 5 mm, rectangle, grid 2.54 mm >NAME >VALUE ELECTROLYTIC CAPACITOR body 7.6 x 5 mm, rectangle, grid 5.08 mm >NAME >VALUE ELECTROLYTIC CAPACITOR body 12.7 x 7.6 mm, rectangle, grid 10.16 mm >NAME >VALUE ELECTROLYTIC CAPACITOR body 12.5 x 12.5 mm, rectangle, grid 10.16 mm >NAME >VALUE ELECTROLYTIC CAPACITOR diameter 4 mm, grid 2.54 mm >NAME >VALUE ELECTROLYTIC CAPACITOR diameter 4 mm, grid 2.54 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 5 mm, grid 2.54 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 6 mm, grid 2.54 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 6 mm, grid 2.54 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 7 mm, grid 2.54 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 7 mm, grid 2.54 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 10 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 11 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 11 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 6 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 6 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 7 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 7 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 9 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 9 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR rectangle, grid 2.54 mm >NAME >VALUE ELECTROLYTIC CAPACITOR rectangle, grid 5.08 mm >NAME >VALUE ELECTROLYTIC CAPACITOR rectangle, grid 5.08 mm >NAME >VALUE ELECTROLYTIC CAPACITOR rectangle, grid 10.16 mm >NAME >VALUE ELECTROLYTIC CAPACITOR rectangle, grid 10.16 mm >NAME >VALUE ELECTROLYTIC CAPACITOR >NAME >VALUE ELECTROLYTIC CAPACITOR >NAME >VALUE ELECTROLYTIC CAPACITOR >NAME >VALUE ELECTROLYTIC CAPACITOR >NAME >VALUE ELECTROLYTIC CAPACITOR diameter 4.5 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 5.0 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 7.0 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 6.0 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR diameter 8.0 mm, grid 5.08 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR grid 1.8 mm, diameter 4 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 15.24 mm, diameter 5 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 15.24 mm, diameter 6 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 15.24 mm, diameter 9 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 2.54 mm, diameter 4 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 2.54 mm, diameter 5 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 2.54 mm, diameter 6 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 2.54 mm, diameter 7 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 2.54 mm, diameter 4 mm, >NAME >VALUE ELECTROLYTIC CAPACITOR grid 2 mm, diameter 4 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 2.032 mm, diameter 5 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 22.86 mm, diameter 10 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 22.86 mm, diameter 6 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 22.86 mm, diameter 9 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 3.5 mm, diameter 10 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 25.4 mm, diameter 10 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 25.4 mm, diameter 9 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 3.5 mm, diameter 8 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 30.48 mm, diameter 10 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 30.48 mm, diameter 12 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 30.48 mm, diameter 16 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 35.56 mm, diameter 12 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 30.48 mm, diameter 14 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 30.48 mm, diameter 16 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 30.48 mm, diameter 18 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 45.72 mm, diameter 16 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 45.72 mm, diameter 18 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 45.72 mm, diameter 21 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 45.72 mm, diameter 22 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 45.72 mm, diameter 25 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 5.08 mm, diameter 10.5 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 5.08 mm, diameter 13 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 5.05 mm, diameter 4 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 5.08 mm, diameter 5 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 5.08 mm, diameter 6 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 5.08 mm, diameter 8.5 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 50 mm, diameter 25 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 50 mm, diameter 30 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 55 mm, diameter 25 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 55 mm, diameter 30 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 5.08 mm, diameter 9 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 7.62 mm, diameter 16 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 7.62 mm, diameter 18 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 10.16 mm, diameter 20 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 10.16 mm, diameter 22.5 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 10.16 mm, diameter 25 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 10.16 mm, diameter 30 mm >NAME >VALUE ELECTROLYTIC CAPACITOR grid 10.16 mm, diameter 35 mm >NAME >VALUE Aluminum electrolytic capacitors reflow soldering SMD (Chip) Standard 085 CS http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors wave soldering SMD (Chip) Standard 085 CS http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors reflow soldering SMD (Chip) Standard 085 CS http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors wave soldering SMD (Chip) Standard 085 CS http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors reflow soldering SMD (Chip) Long Life 139 CLL http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors wave soldering SMD (Chip) Long Life 139 CLL http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors reflow soldering SMD (Chip) Long Life 139 CLL http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors wave soldering SMD (Chip) Long Life 139 CLL http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long life base plate, High temperature 140 CLH http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long life base plate, High temperature 140 CLH http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long life base plate, High temperature 140 CLH http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long life base plate, very low impedance 150 CLZ http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long life base plate, very low impedance 150 CLZ http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long life base plate, very low impedance 150 CLZ http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long Life Vertical 153 CLV http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long Life Vertical 153 CLV http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long Life Vertical 153 CLV http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long Life Vertical 153 CLV http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long Life Vertical 153 CLV http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long Life Vertical 153 CLV http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long Life Vertical 153 CLV http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors SMD (Chip) Long Life Vertical 153 CLV http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP http://www.bccomponents.com/ >NAME >VALUE Aluminum electrolytic capacitors High Temperature solid electrolytic SMD 175 TMP http://www.bccomponents.com/ >NAME >VALUE Chip Capacitor Type KEMET A / EIA 3216-18 reflow solderKEMET S / EIA 3216-12 >NAME >VALUE Chip Capacitor Type KEMET A / EIA 3216-18 Wave solder KEMET S / EIA 3216-12 >NAME >VALUE Chip Capacitor Type KEMET B / EIA 3528-21 reflow solderKEMET T / EIA 3528-12 >NAME >VALUE Chip Capacitor Type KEMET B / EIA 3528-21 Wave solder KEMET T / EIA 3528-12 >NAME >VALUE Chip Capacitor Type KEMET C / EIA 6032-28 reflow solderKEMET U / EIA 6032-15 >NAME >VALUE Chip Capacitor Type KEMET C / EIA 6032-28 Wafe solder KEMET U / EIA 6032-15 >NAME >VALUE Chip Capacitor Type KEMET D / EIA 7343-21KEMET V / EIA 7343-20, KEMET X / EIA 7343-43 reflow solder >NAME >VALUE Chip Capacitor Type KEMET D / EIA 7343-21 KEMET V / EIA 7343-20, KEMET X / EIA 7343-43 Wafe solder >NAME >VALUE Chip Capacitor Type KEMET E / EIA 7260-38 reflow solder >NAME >VALUE Chip Capacitor Type KEMET E / EIA 7260-38 Wafe solder >NAME >VALUE Chip Capacitor Type KEMET R/EIA 2012-12 reflow solder >NAME >VALUE Chip Capacitor Type KEMET R/EIA 2012-12 Wafe solder >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package A >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package B >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package C >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package D >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package F >NAME >VALUE Panasonic Aluminium Electrolytic Capacitor VS-Serie Package G >NAME >VALUE ELECTROLYTIC CAPACITOR diameter 5 mm, grid 2.54 mm >NAME >VALUE TT ELECTROLYTIC CAPACITOR grid 2.54 mm, diameter 6 mm >NAME >VALUE Chip Capacitor Polar tantalum capacitors with solid electrolyte Siemens Matsushita Components B 45 194, B 45 197, B 45 198 Source: www.farnell.com/datasheets/247.pdf >NAME >VALUE Chip Capacitor Polar tantalum capacitors with solid electrolyte Siemens Matsushita Components B 45 194 Source: www.farnell.com/datasheets/247.pdf >NAME >VALUE Chip Capacitor Polar tantalum capacitors with solid electrolyte Siemens Matsushita Components B 45 194 Source: www.farnell.com/datasheets/247.pdf >NAME >VALUE Chip Capacitor Polar tantalum capacitors with solid electrolyte Siemens Matsushita Components B 45 194, B 45 197, B 45 198 Source: www.farnell.com/datasheets/247.pdf >NAME >VALUE Chip Capacitor Polar tantalum capacitors with solid electrolyte Siemens Matsushita Components B 45 194, B 45 197, B 45 198 Source: www.farnell.com/datasheets/247.pdf >NAME >VALUE Chip Capacitor Polar tantalum capacitors with solid electrolyte Siemens Matsushita Components B 45 194, B 45 197, B 45 198 Source: www.farnell.com/datasheets/247.pdf >NAME >VALUE Chip Capacitor Polar tantalum capacitors with solid electrolyte Siemens Matsushita Components B 45 194, B 45 197, B 45 198 Source: www.farnell.com/datasheets/247.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor SMD type with conductive polymer electrolyte Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor SMD type with conductive polymer electrolyte Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor SMD type with conductive polymer electrolyte Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor SMD type with conductive polymer electrolyte Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor SMD type with conductive polymer electrolyte Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor SMD type with conductive polymer electrolyte Source: e_os_all.pdf >NAME >VALUE SANYO OSCON Capacitor SMD type with conductive polymer electrolyte Source: e_os_all.pdf >NAME >VALUE ALUMINUM ELECTROLYTIC CAPACITORS UD Series 10 x 10 mm Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf >NAME >VALUE ALUMINUM ELECTROLYTIC CAPACITORS UD Series 4 x 5.8 mm Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf >NAME >VALUE ALUMINUM ELECTROLYTIC CAPACITORS UD Series 5 x 5.8 mm Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf >NAME >VALUE ALUMINUM ELECTROLYTIC CAPACITORS UD Series 6.3 x 5.8 mm Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf >NAME >VALUE ALUMINUM ELECTROLYTIC CAPACITORS UD Series 6.3 x 7.7 mm Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf >NAME >VALUE ALUMINUM ELECTROLYTIC CAPACITORS UD Series 8 x 10 mm Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf >NAME >VALUE >NAME >VALUE >NAME + >VALUE CAPACITOR, European symbol POLARIZED CAPACITOR, European symbol Resistors, Capacitors, Inductors Based on the previous libraries: <ul> <li>r.lbr <li>cap.lbr <li>cap-fe.lbr <li>captant.lbr <li>polcap.lbr <li>ipc-smd.lbr </ul> All SMD packages are defined according to the IPC specifications and CECC <author>Created by librarian@cadsoft.de</author> for Electrolyt Capacitors see also : www.bccomponents.com www.panasonic.com www.kemet.com for trimmer refence see : www.electrospec-inc.com/cross_references/trimpotcrossref.asp <map name="nav_main"> <area shape="rect" coords="0,1,140,23" href="../military_specs.asp" title=""> <area shape="rect" coords="0,24,140,51" href="../about.asp" title=""> <area shape="rect" coords="1,52,140,77" href="../rfq.asp" title=""> <area shape="rect" coords="0,78,139,103" href="../products.asp" title=""> <area shape="rect" coords="1,102,138,128" href="../excess_inventory.asp" title=""> <area shape="rect" coords="1,129,138,150" href="../edge.asp" title=""> <area shape="rect" coords="1,151,139,178" href="../industry_links.asp" title=""> <area shape="rect" coords="0,179,139,201" href="../comments.asp" title=""> <area shape="rect" coords="1,203,138,231" href="../directory.asp" title=""> <area shape="default" nohref> </map> <html> <title></title> <LINK REL="StyleSheet" TYPE="text/css" HREF="style-sheet.css"> <body bgcolor="#ffffff" text="#000000" marginwidth="0" marginheight="0" topmargin="0" leftmargin="0"> <table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0 height="55%"> <tr valign="top"> </td> <! <td width="10"> </td> <td width="90%"> TRIM-POT CROSS REFERENCE <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> <TR> <TD COLSPAN=8> RECTANGULAR MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURNS </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD><TD> </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3005P 3006P 3006W 3006Y 3009P 3009W 3009Y 3057J 3057L 3057P 3057Y 3059J 3059L 3059P 3059Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 89P 89W 89X 89PH 76P 89XH 78SLT 78L ALT 56P ALT 78P ALT T8S 78L 56P 78P </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - T18/784 783 781 - - - 2199 1697/1897 1680/1880 2187 - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 8035EKP/CT20/RJ-20P - RJ-20X - - - 1211L 8012EKQ ALT 8012EKR ALT 1211P 8012EKJ 8012EKL 8012EKQ 8012EKR </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 2101P 2101W 2101Y - - - - - - - - 2102L 2102S 2102Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVMCOG - - - - - - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 43P 43W 43Y - - - - 40L 40P 40Y 70Y-T602 70L 70P 70Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - RT/RTR12 RT/RTR12 RT/RTR12 - RJ/RJR12 RJ/RJR12 RJ/RJR12 </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SQUARE MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3250L 3250P 3250W 3250X 3252P 3252W 3252X 3260P 3260W 3260X 3262P 3262W 3262X 3266P 3266W 3266X 3290H 3290P 3290W 3292P 3292W 3292X 3296P 3296W 3296X 3296Y 3296Z 3299P 3299W 3299X 3299Y 3299Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 66P ALT 66W ALT 66X ALT 66P ALT 66W ALT 66X ALT - 64W ALT - 64P ALT 64W ALT 64X ALT 64P 64W 64X 66X ALT 66P ALT 66W ALT 66P 66W 66X 67P 67W 67X 67Y 67Z 68P 68W 68X 67Y ALT 67Z ALT </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 5050 5091 5080 5087 - - - - - - - T63YB T63XB - - - 5887 5891 5880 - - - T93Z T93YA T93XA T93YB T93XB - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 8026EKP 8026EKW 8026EKM 8026EKP 8026EKB 8026EKM 1309X 1309P 1309W 8024EKP 8024EKW 8024EKN RJ-9P/CT9P RJ-9W RJ-9X - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 3103P 3103Y 3103Z 3103P 3103Y 3103Z - - - - - - 3105P/3106P 3105W/3106W 3105X/3106X 3105Y/3106Y 3105Z/3105Z 3102P 3102W 3102X 3102Y 3102Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - - - - - - - - - - - - - EVMCBG EVMCCG - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 55-1-X 55-4-X 55-3-X 55-2-X - - - - - - - - - - - - 50-2-X 50-4-X 50-3-X - - - 64P 64W 64X 64Y 64Z - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> RT/RTR22 RT/RTR22 RT/RTR22 RT/RTR22 RJ/RJR22 RJ/RJR22 RJ/RJR22 RT/RTR26 RT/RTR26 RT/RTR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RT/RTR24 RT/RTR24 RT/RTR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 - - - - - - - </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SINGLE TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3323P 3323S 3323W 3329H 3329P 3329W 3339H 3339P 3339W 3352E 3352H 3352K 3352P 3352T 3352V 3352W 3362H 3362M 3362P 3362R 3362S 3362U 3362W 3362X 3386B 3386C 3386F 3386H 3386K 3386M 3386P 3386S 3386W 3386X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 25P 25S 25RX 82P 82M 82PA - - - 91E 91X 91T 91B 91A 91V 91W 25W 25V 25P - 25S 25U 25RX 25X 72XW 72XL 72PM 72RX - 72PX 72P 72RXW 72RXL 72X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - T7YB T7YA - - - - - - - - - - - - TXD TYA TYP - TYD TX - 150SX 100SX 102T 101S 190T 150TX 101 - - 101SX </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ET6P ET6S ET6X RJ-6W/8014EMW RJ-6P/8014EMP RJ-6X/8014EMX TM7W TM7P TM7X - 8017SMS - 8017SMB 8017SMA - - CT-6W CT-6H CT-6P CT-6R - CT-6V CT-6X - - 8038EKV - 8038EKX - - 8038EKP 8038EKZ 8038EKW - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 3321H 3321P 3321N 1102H 1102P 1102T RVA0911V304A - RVA0911H413A RVG0707V100A RVA0607V(H)306A RVA1214H213A - - - - - - - - - 3104B 3104C 3104F 3104H - 3104M 3104P 3104S 3104W 3104X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> EVMQ0G EVMQIG EVMQ3G EVMS0G EVMQ0G EVMG0G - - - EVMK4GA00B EVM30GA00B EVMK0GA00B EVM38GA00B EVMB6 EVLQ0 - EVMMSG EVMMBG EVMMAG - - EVMMCS - - - - - EVMM1 - - EVMM0 - - EVMM3 </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 62-3-1 62-1-2 - - - - - - - - - - - 67R - 67P - - - - 67X 63V 63S 63M - - 63H 63P - - 63X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - RJ/RJR50 RJ/RJR50 RJ/RJR50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - </TD> </TR> </TABLE>   <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> <TR> <TD COLSPAN=7> SMD TRIM-POT CROSS REFERENCE MULTI-TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3224G 3224J 3224W 3269P 3269W 3269X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 44G 44J 44W 84P 84W 84X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST63Z ST63Y - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST5P ST5W ST5X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> </TR> <TR> <TD COLSPAN=7>  </TD> </TR> <TR> <TD COLSPAN=7> SINGLE TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3314G 3314J 3364A/B 3364C/D 3364W/X 3313G 3313J </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 23B 23A 21X 21W - 22B 22A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST5YL/ST53YL ST5YJ/5T53YJ ST-23A ST-22B ST-22 - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST-4B ST-4A - - - ST-3B ST-3A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVM-6YS EVM-1E EVM-1G EVM-1D - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> G4B G4A TR04-3S1 TRG04-2S1 - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - DVR-43A CVR-42C CVR-42A/C - - </TD> </TR> </TABLE> ALT = ALTERNATE   </td> </tr> </table> </BODY></HTML> RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR MELF 0.10 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.12 W >NAME >VALUE RESISTOR MELF 0.10 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.12 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR type 0204, grid 5 mm >NAME >VALUE RESISTOR type 0204, grid 7.5 mm >NAME >VALUE RESISTOR type 0204, grid 2.5 mm >NAME >VALUE RESISTOR type 0207, grid 10 mm >NAME >VALUE RESISTOR type 0207, grid 12 mm >NAME >VALUE RESISTOR type 0207, grid 15mm >NAME >VALUE RESISTOR type 0207, grid 2.5 mm >NAME >VALUE RESISTOR type 0207, grid 5 mm >NAME >VALUE RESISTOR type 0207, grid 7.5 mm >NAME >VALUE RESISTOR type 0309, grid 10mm >NAME >VALUE RESISTOR type 0309, grid 12.5 mm >NAME >VALUE RESISTOR type 0309, grid 2.5 mm >NAME >VALUE RESISTOR type 0411, grid 12.5 mm >NAME >VALUE RESISTOR type 0411, grid 15 mm >NAME >VALUE RESISTOR type 0411, grid 3.81 mm >NAME >VALUE RESISTOR type 0414, grid 15 mm >NAME >VALUE RESISTOR type 0414, grid 5 mm >NAME >VALUE RESISTOR type 0617, grid 17.5 mm >NAME >VALUE RESISTOR type 0617, grid 22.5 mm >NAME >VALUE RESISTOR type 0617, grid 5 mm >NAME >VALUE RESISTOR type 0922, grid 22.5 mm >NAME >VALUE RESISTOR type 0613, grid 5 mm >NAME >VALUE RESISTOR type 0613, grid 15 mm >NAME >VALUE RESISTOR type 0817, grid 22.5 mm >NAME >VALUE 0817 RESISTOR type 0817, grid 6.35 mm >NAME >VALUE 0817 RESISTOR type V234, grid 12.5 mm >NAME >VALUE RESISTOR type V235, grid 17.78 mm >NAME >VALUE RESISTOR type V526-0, grid 2.5 mm >NAME >VALUE CECC Size RC2211 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC2211 Wave Soldering source Beyschlag >NAME >VALUE CECC Size RC3715 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC3715 Wave Soldering source Beyschlag >NAME >VALUE CECC Size RC6123 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC6123 Wave Soldering source Beyschlag >NAME >VALUE RESISTOR type 0922, grid 7.5 mm >NAME >VALUE 0922 RESISTOR type RDH, grid 15 mm >NAME >VALUE RDH Mini MELF 0102 Axial >NAME >VALUE >NAME >VALUE RESISTOR, European symbol Female Headers etc. Naming: FE = female # contacts - # rows W = angled <author>Created by librarian@cadsoft.de</author> FEMALE HEADER >NAME 1 >VALUE 8 FEMALE HEADER >VALUE >NAME FEMALE HEADER <h3>SparkFun Connectors</h3> This library contains electrically-functional connectors. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Plated Through Hole</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Molex 2-Pin Plated Through-Hole</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>JST-Right Angle Male Header SMT</h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 2mm</li> </ul> <a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> <li>JST_2MM_MALE</li> </ul> >NAME >VALUE <h3>Plated Through Hole</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.15"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>JST-Vertical Male Header SMT </h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 2mm</li> </ul> <a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >Name >Value <h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 5mm/197mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Plated Through Hole - Locking Footprint</h3> Holes are staggered by 0.005" from center to hold pins while soldering. Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3> Holes are offset from center by 0.005" to hold pins in place during soldering. Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Plated Through Hole - Long Pads with Locking Footprint</h3> Pins are staggered by 0.005" from center to hold pins in place while soldering. Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3> Holes are offset from center 0.005" to hold pins in place during soldering. Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Plated Through Hole - Long Pads without Silk Outline</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Plated Through Hole - No Silk Outline</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>JST 2 Pin Right Angle Plated Through Hole</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >Name >Value + - <h3>Plated Through Hole - 0.1" holes</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.2"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Pogo Pins Connector - No Silk Outline</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. No silk outline of connector. Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >Name >Value + - <h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >Name >Value + - <h3>Spring Terminal- PCB Mount 2 Pin PTH</h3> tDocu marks the spring arms Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> <h3>2 Pin Screw Terminal - 2.54mm</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE 2 pin poke-home connector part number 2062-2P from STA >NAME >VALUE >NAME >VALUE <h3>Plated Through Hole - 3 Pin</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH</h3> Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Locking Footprint</h3> Pins are staggered 0.005" off center to lock pins while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint</h3> Holes are offset 0.005" from center to lock pins in place while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> Pins are offset 0.005" from center to lock pins in place during soldering. Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH Locking</h3> Holes are offset 0.007" from center to hold pins in place during soldering. Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin No Silk Outline</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Long Pads</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Right Angle Plated Through Hole</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>Pogo Pins - 3 Pin</h3> Specifications: <ul><li>Pin count:3</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 5mm Pitch -3 Pin PTH</h3> Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 5mm/197mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline</h3> Holes are offset from center 0.005" to lock pins in place while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Right Angle SMT</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin SMD</h3> Specifications: <ul><li>Pin count:3</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD - 3 Pin Right Angle Female Header</h3> Silk outline of pin location Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD- 3 Pin Right Angle Male Headers</h3> No silk outline, but tDocu layer shows pin location. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Vertical Plated Through Hole</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> <h3>JST 3 Pin Right Angle Plated Through Hole – NO SILK</h3> No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK</h3> No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE Plated Through Hole Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Molex 2-Pin Plated Through-Hole Specifications: Pin count:2 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_02 Screw Terminal 3.5mm Pitch - 2 Pin PTH Specifications: Pin count: 2 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_02 JST-Right Angle Male Header SMT Specifications: Pin count: 2 Pin pitch: 2mm Datasheet referenced for footprint Example device(s): CONN_02 JST_2MM_MALE Plated Through Hole Specifications: Pin count:2 Pin pitch:0.15" Example device(s): CONN_02 JST-Vertical Male Header SMT Specifications: Pin count: 2 Pin pitch: 2mm Datasheet referenced for footprint Example device(s): CONN_02 Screw Terminal 5mm Pitch -2 Pin PTH Specifications: Pin count: 2 Pin pitch: 5mm/197mil Datasheet referenced for footprint Example device(s): CONN_02 Plated Through Hole - Locking Footprint Holes are staggered by 0.005" from center to hold pins while soldering. Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Molex 2-Pin Plated Through-Hole Locking Footprint Holes are offset from center by 0.005" to hold pins in place during soldering. Specifications: Pin count:2 Pin pitch:0.1" Datasheet referenced for footprint Example device(s): CONN_02 Plated Through Hole - Long Pads with Locking Footprint Pins are staggered by 0.005" from center to hold pins in place while soldering. Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking Holes are offset from center 0.005" to hold pins in place during soldering. Specifications: Pin count: 2 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_02 Plated Through Hole - Long Pads without Silk Outline Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Plated Through Hole - No Silk Outline Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 JST 2 Pin Right Angle Plated Through Hole tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. Specifications: Pin count: 2 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_02 Plated Through Hole - 0.1" holes Specifications: Pin count:2 Pin pitch:0.2" Example device(s): CONN_02 Pogo Pins Connector - No Silk Outline Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline Specifications: Pin count: 2 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_02 JST 2 Pin Right Angle Plated Through Hole- No Silk tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. No silk outline of connector. Specifications: Pin count: 2 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_02 JST 2 Pin Right Angle Plated Through Hole - KIT tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. Specifications: Pin count: 2 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_02 Spring Terminal- PCB Mount 2 Pin PTH tDocu marks the spring arms Specifications: Pin count: 4 Pin pitch: 0.1" Datasheet referenced for footprint Example device(s): CONN_02 2 Pin Screw Terminal - 2.54mm Specifications: Pin count:2 Pin pitch:0.1" Example device(s): CONN_02 2 pin poke-home connector part number 2062-2P from STA Plated Through Hole - 3 Pin Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 PTH - 3 Pin Vertical Molex Polarized Header Datasheet referenced for footprint: 4UCONN part # 01932 Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 Screw Terminal 3.5mm Pitch -3 Pin PTH Specifications: Pin count: 3 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_03 Plated Through Hole - 3 Pin Locking Footprint Pins are staggered 0.005" off center to lock pins while soldering. Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint Holes are offset 0.005" from center to lock pins in place while soldering. Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 PTH - 3 Pin Vertical Molex Polarized Header Pins are offset 0.005" from center to lock pins in place during soldering. Datasheet referenced for footprint: 4UCONN part # 01932 Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 Screw Terminal 3.5mm Pitch -3 Pin PTH Locking Holes are offset 0.007" from center to hold pins in place during soldering. Specifications: Pin count: 3 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_03 Plated Through Hole - 3 Pin No Silk Outline Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 Plated Through Hole - 3 Pin Long Pads Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 JST 3 Pin Right Angle Plated Through Hole Specifications: Pin count:3 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_03 Pogo Pins - 3 Pin Specifications: Pin count:3 Example device(s): CONN_03 Screw Terminal 5mm Pitch -3 Pin PTH Specifications: Pin count: 3 Pin pitch: 5mm/197mil Datasheet referenced for footprint Example device(s): CONN_03 Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline Holes are offset from center 0.005" to lock pins in place while soldering. Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 JST 3 Pin Right Angle SMT Specifications: Pin count:3 Pin pitch:2mm Example device(s): CONN_03 Plated Through Hole - 3 Pin SMD Specifications: Pin count:3 Example device(s): CONN_03 SMD - 3 Pin Right Angle Female Header Silk outline of pin location Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 SMD- 3 Pin Right Angle Male Headers No silk outline, but tDocu layer shows pin location. Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 SMD - 3 Pin Right Angle Male Header w/ Alignment Posts Datasheet referenced for footprint: 4UCONN part # 11026 Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 JST 3 Pin Vertical Plated Through Hole Specifications: Pin count:3 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_03 SMD - 3 Pin Right Angle Male Header w/ Alignment Posts Datasheet referenced for footprint: 4UCONN part # 11026 Specifications: Pin count:3 Pin pitch:0.1" Example device(s): CONN_03 JST 3 Pin Right Angle Plated Through Hole – NO SILK No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: Pin count:3 Pin pitch:2mm Datasheet referenced for footprint Example device(s): CONN_03 Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: Pin count: 3 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): CONN_03 <h3>2 Pin Connection</h3> >VALUE >NAME <h3>3 Pin Connection</h3> >VALUE >NAME <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> On any of the 0.1 inch spaced packages, you can populate with these: <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> </ul> For SCREWTERMINALS and SPRING TERMINALS visit here: <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> </ul> Special notes: Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings. 2.54_SCREWTERM for use with PRT-10571. 3.5mm Screw Terminal footprints for PRT-08084 5mm Screw Terminal footprints for use with PRT-08432 <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> On any of the 0.1 inch spaced packages, you can populate with these: <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> <li><a href="https://www.sparkfun.com/products/13875"> Stackable Header - 3 Pin (Female, 0.1")</a> (PRT-13875)</li> </ul> For SCREWTERMINALS and SPRING TERMINALS visit here: <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> </ul> Special notes: Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings. Clk Ld Gnd Din 5V 5V Clk Ld Gnd Din TA23-11SRWA COL1 - 13 COL2 - 3 COL3 - 4 COL4 - 10 COL5 - 6 COL6 - 11 COL7 - 15 COL8 - 16 ROW1 - 9 ROW2 - 14 ROW3 - 8 ROW4 - 12 ROW5 - 1 ROW6 - 7 ROW7 - 2 ROW8 - 5 TOP BOTTOM 16 15 14 13 12 11 10 9 Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version. Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.