Generated by EAGLE CAM Processor 9.0.1 Photoplotter Info File: C:/Users/984232/Documents/eagle_cad/eagle/Arduino_TLC5940/TLC5940_SMD_8DIGIT_DEV.gpi Date : 6/5/2018 14:56 Plotfile : C:/Users/984232/Documents/eagle_cad/eagle/Arduino_TLC5940/TLC5940_SMD_8DIGIT_DEV.GTL Apertures : generated: Device : Gerber RS-274-X photoplotter, coordinate format 2.5 inch Parameter settings: Emulate Apertures : no Tolerance Draw + : 0.00 % Tolerance Draw - : 0.00 % Tolerance Flash + : 0.00 % Tolerance Flash - : 0.00 % Rotate : no Mirror : no Optimize : yes Auto fit : yes OffsetX : 0inch OffsetY : 0inch Plotfile Info: Coordinate Format : 2.5 Coordinate Units : Inch Data Mode : Absolute Zero Suppression : None End Of Block : * Apertures used: Code Shape Size used D10 draw 0.0000inch 8 D11 octagon 0.0480inch 24 D12 draw 0.0860inch 3 D13 draw 0.0600inch 93 D14 round 0.0740inch 10 D15 round 0.0480inch 2 D16 draw 0.0480inch 140 D17 draw 0.0100inch 656 D18 draw 0.0060inch 15783 D19 round 0.0270inch 56 D20 draw 0.0240inch 86