<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="6.5.0">
<drawing>
<board>
<plain>
<wire x1="1.27" y1="21.59" x2="31.75" y2="21.59" width="0.2032" layer="20"/>
<wire x1="31.75" y1="21.59" x2="31.75" y2="1.27" width="0.2032" layer="20"/>
<wire x1="31.75" y1="1.27" x2="1.27" y2="1.27" width="0.2032" layer="20"/>
<wire x1="1.27" y1="1.27" x2="1.27" y2="21.59" width="0.2032" layer="20"/>
<text>3.3V</text>
<text>TX-O</text>
<text>RX-I</text>
<text>GND</text>
<text>FT232R Breakout</text>
<text>VCC</text>
<text>V3.3</text>
<text>PWREN</text>
<text>TXDEN</text>
<text>SLEEP</text>
<text>RXLED</text>
<text>TXLED</text>
<text>VCCIO</text>
<text>CTS</text>
<text>DCD</text>
<text>DSR</text>
<text>RI</text>
<text>RTS</text>
<text>DTR</text>
<text>RXD</text>
<text>TXD</text>
<text>GND</text>
<text>GND</text>
<text>RX</text>
<text>TX</text>
<text>v3.7</text>
<text>Nathan Seidle</text>
<text>Toni Klopfenstein</text>
<text>3.3V</text>
<text>VCC</text>
</plain>
<libraries>
<library name="SparkFun">
<packages>
<package name="SFE-NEW-WEBLOGO">
</package>
<package name="PTC-1206">
</package>
<package name="1X09">
</package>
<package name="SSOP28DB">
<description>&lt;b&gt;Small Shrink Outline Package&lt;/b&gt;</description>
</package>
<package name="1X04">
</package>
<package name="FIDUCIAL-1X2">
</package>
</packages>
</library>
<library name="SparkFun-Resistors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0603-RES">
</package>
</packages>
</library>
<library name="SparkFun-LED">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find discrete LEDs for illumination or indication, but no displays.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="LED-0603">
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0603-CAP">
</package>
<package name="EIA3216">
</package>
</packages>
</library>
<library name="SparkFun-Aesthetics">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="CREATIVE_COMMONS">
</package>
<package name="REVISION">
</package>
<package name="OSHW-LOGO-S">
</package>
</packages>
</library>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="USB-B-MICRO-SMD_V03">
</package>
</packages>
</library>
<library name="SparkFun-Electromechanical">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="AYZ0202">
<description>&lt;b&gt;DPDT Slide Switch SMD&lt;/b&gt;
www.SparkFun.com SKU : Comp-SMDS</description>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="C2" library="SparkFun-Capacitors" package="0603-CAP" value="0.1uF">
<attribute name="NAME"/>
<attribute name="VALUE" value="0.1uF"/>
<attribute name="PROD_ID" value="CAP-00810"/>
</element>
<element name="C5" library="SparkFun-Capacitors" package="EIA3216" value="10uF">
<attribute name="NAME"/>
<attribute name="VALUE" value="10uF"/>
<attribute name="PROD_ID" value="CAP-00811"/>
</element>
<element name="C1" library="SparkFun-Capacitors" package="0603-CAP" value="0.1uF">
<attribute name="NAME"/>
<attribute name="VALUE" value="0.1uF"/>
<attribute name="PROD_ID" value="CAP-00810"/>
</element>
<element name="U$2" library="SparkFun" package="SFE-NEW-WEBLOGO" value="LOGO-SFENEW"/>
<element name="JP1" library="SparkFun" package="1X09" value=""/>
<element name="JP2" library="SparkFun" package="1X09" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U1" library="SparkFun" package="SSOP28DB" value="FT232R"/>
<element name="R1" library="SparkFun-Resistors" package="0603-RES" value="330">
<attribute name="PROD_ID" value="RES-00818"/>
<attribute name="VALUE" value="330"/>
</element>
<element name="R2" library="SparkFun-Resistors" package="0603-RES" value="330">
<attribute name="PROD_ID" value="RES-00818"/>
<attribute name="VALUE" value="330"/>
</element>
<element name="LED1" library="SparkFun-LED" package="LED-0603" value="Red">
<attribute name="PROD_ID" value="DIO-00819"/>
<attribute name="VALUE" value="RED"/>
</element>
<element name="LED2" library="SparkFun-LED" package="LED-0603" value="Green">
<attribute name="PROD_ID" value="DIO-00821"/>
<attribute name="VALUE" value="GREEN"/>
</element>
<element name="F1" library="SparkFun" package="PTC-1206" value="500mA"/>
<element name="JP3" library="SparkFun" package="1X04" value=""/>
<element name="JP5" library="SparkFun" package="FIDUCIAL-1X2" value="FIDUCIAL1X2"/>
<element name="JP6" library="SparkFun" package="FIDUCIAL-1X2" value="FIDUCIAL1X2"/>
<element name="FRAME1" library="SparkFun-Aesthetics" package="CREATIVE_COMMONS" value="FRAME-LETTER"/>
<element name="U$1" library="SparkFun-Aesthetics" package="REVISION" value="REVISION"/>
<element name="LOGO1" library="SparkFun-Aesthetics" package="OSHW-LOGO-S" value="OSHW-LOGOS"/>
<element name="JP7" library="SparkFun-Connectors" package="USB-B-MICRO-SMD_V03" value="USB_MICROB_PLUGCONN-11752">
<attribute name="PROD_ID" value="CONN-11752"/>
</element>
<element name="S1" library="SparkFun-Electromechanical" package="AYZ0202" value="">
<attribute name="PROD_ID" value="SWCH-08179"/>
</element>
</elements>
<signals>
<signal name="GND">
<contactref element="C2" pad="2"/>
<contactref element="C5" pad="C"/>
<contactref element="C1" pad="2"/>
<contactref element="U1" pad="26"/>
<contactref element="U1" pad="25"/>
<contactref element="U1" pad="7"/>
<contactref element="U1" pad="18"/>
<contactref element="U1" pad="21"/>
<contactref element="JP2" pad="7"/>
<contactref element="JP1" pad="1"/>
<contactref element="JP3" pad="4"/>
<contactref element="JP7" pad="GND1"/>
</signal>
<signal name="USB_D-">
<contactref element="U1" pad="16"/>
<contactref element="JP7" pad="D-1"/>
</signal>
<signal name="USB_D+">
<contactref element="U1" pad="15"/>
<contactref element="JP7" pad="D+1"/>
</signal>
<signal name="VCC">
<contactref element="U1" pad="20"/>
<contactref element="C5" pad="A"/>
<contactref element="C2" pad="1"/>
<contactref element="F1" pad="2"/>
<contactref element="JP1" pad="4"/>
<contactref element="S1" pad="3"/>
</signal>
<signal name="TXD">
<contactref element="U1" pad="1"/>
<contactref element="JP2" pad="1"/>
<contactref element="JP3" pad="2"/>
</signal>
<signal name="RXD">
<contactref element="U1" pad="5"/>
<contactref element="JP2" pad="5"/>
<contactref element="JP3" pad="3"/>
</signal>
<signal name="RTS">
<contactref element="U1" pad="3"/>
<contactref element="JP2" pad="3"/>
</signal>
<signal name="CTS">
<contactref element="U1" pad="11"/>
<contactref element="JP1" pad="6"/>
</signal>
<signal name="DTR">
<contactref element="U1" pad="2"/>
<contactref element="JP2" pad="2"/>
</signal>
<signal name="DSR">
<contactref element="U1" pad="9"/>
<contactref element="JP2" pad="8"/>
</signal>
<signal name="DCD">
<contactref element="U1" pad="10"/>
<contactref element="JP2" pad="9"/>
</signal>
<signal name="RI">
<contactref element="U1" pad="6"/>
<contactref element="JP2" pad="6"/>
</signal>
<signal name="VCCIO">
<contactref element="U1" pad="4"/>
<contactref element="JP2" pad="4"/>
<contactref element="R1" pad="2"/>
<contactref element="R2" pad="2"/>
<contactref element="S1" pad="2"/>
</signal>
<signal name="3.3V">
<contactref element="C1" pad="1"/>
<contactref element="U1" pad="17"/>
<contactref element="JP1" pad="5"/>
<contactref element="JP3" pad="1"/>
<contactref element="S1" pad="1"/>
</signal>
<signal name="TXLED">
<contactref element="U1" pad="23"/>
<contactref element="LED1" pad="C"/>
<contactref element="JP1" pad="2"/>
</signal>
<signal name="RXLED">
<contactref element="U1" pad="22"/>
<contactref element="LED2" pad="C"/>
<contactref element="JP1" pad="3"/>
</signal>
<signal name="PWREN">
<contactref element="U1" pad="14"/>
<contactref element="JP1" pad="9"/>
</signal>
<signal name="TXDEN">
<contactref element="U1" pad="13"/>
<contactref element="JP1" pad="8"/>
</signal>
<signal name="SLEEP">
<contactref element="U1" pad="12"/>
<contactref element="JP1" pad="7"/>
</signal>
<signal name="N$1">
<contactref element="R1" pad="1"/>
<contactref element="LED1" pad="A"/>
</signal>
<signal name="N$2">
<contactref element="R2" pad="1"/>
<contactref element="LED2" pad="A"/>
</signal>
<signal name="N$3">
<contactref element="F1" pad="1"/>
<contactref element="JP7" pad="VBUS1"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
