5VDC TIP+
WILLIAM HARRINGTON
ORATOR REV 1
FEMALE - DCE
OPTS
UART
RESET
VOLUME
AUDIO_OUT
LM386
MAX202CPE
74HCT138N
74HCT373N
74HCT373N
SPEECH ROM
74HCT14N
USR/EXCP ROM
ROM_CS
PIN 6 7 8 MODE
0 0 0 PARALLEL INPUT
0 0 1 SERIAL 50 BAUD
0 1 0 SERIAL 110 BAUD
0 1 1 SERIAL 300 BAUD
1 0 0 SERIAL 1200 BAUD
1 0 1 SERIAL 2400 BAUD
1 1 0 SERIAL 4800 BAUD
1 1 1 SERIAL 9600 BAUD
PIN 9
0 7 BITS, 2 STOP BITS, NO PARITY*
1 SELECTABLE **
PIN 10 RAM BUFFER
0 INTERNAL (20 BYTE IN / 26 BYTE OUT)
1 EXTERNAL (1972 BYTE IN / 256 BYTE OUT)
PIN 11 DELIMETER
0 CARRIAGE RETURN ONLY
1 ANY
PIN 3 INPUT BUFFER (OUTPUT ONLY)
0 BUSY
1 NOT BUSY
* DEFAULT
PIN 3 4
0 1 6 BITS/CHAR
1 0 7 BITS/CHAR
1 1 8 BITS/CHAR
PIN 8 PARITY
0 ENABLED
1 DISABLED
PIN 7 PARITY
0 ODD
1 EVEN
PIN 3 STOP BITS
0 ONE
1 TWO
OPTS MODE SELECTION
UART CONFIGURATION **
<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0>
<tr valign="top">
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table>
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>ELECTROLYTIC CAPACITOR</b><p>
grid 2.54 mm, diameter 7 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
>NAME
>VALUE
<b>ELECTROLYTIC CAPACITOR</b><p>
grid 3.5 mm, diameter 8 mm
>NAME
>VALUE
<b>ELECTROLYTIC CAPACITOR</b><p>
grid 3.5 mm, diameter 10 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 10 mm
>NAME
>VALUE
CAPACITOR
grid 2.5 mm, outline 2.4 x 4.4 mm
ELECTROLYTIC CAPACITOR
grid 5.08 mm, diameter 10.5 mm
RESISTOR
type 0207, grid 10 mm
RESISTOR
type 0204, grid 7.5 mm
ELECTROLYTIC CAPACITOR
grid 2.54 mm, diameter 7 mm
ELECTROLYTIC CAPACITOR
grid 3.5 mm, diameter 8 mm
ELECTROLYTIC CAPACITOR
grid 3.5 mm, diameter 10 mm
RESISTOR
type 0207, grid 10 mm
<b>TTL Devices, 74xx Series with European Symbols</b><p>
Based on the following sources:
<ul>
<li>Texas Instruments <i>TTL Data Book</i> Volume 1, 1996.
<li>TTL Data Book, Volume 2 , 1993
<li>National Seminconductor Databook 1990, ALS/LS Logic
<li>ttl 74er digital data dictionary, ECA Electronic + Acustic GmbH, ISBN 3-88109-032-0
<li>http://icmaster.com/ViewCompare.asp
</ul>
<author>Created by librarian@cadsoft.de</author>
<b>Dual In Line Package</b>
>NAME
>VALUE
<b>Dual In Line Package</b>
>NAME
>VALUE
<b>Dual In Line Package</b>
>NAME
>VALUE
Dual In Line Package
Dual In Line Package
Dual In Line Package
<b>Linear Devices</b><p>
Operational amplifiers, comparators, voltage regulators, ADCs, DACs, etc.<p>
<author>Created by librarian@cadsoft.de</author>
<b>Dual In Line Package</b>
>NAME
>VALUE
Dual In Line Package
<b>Maxim Components</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>Dual In Line Package</b>
>NAME
>VALUE
Dual In Line Package
<b>IC Packages an Sockets</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>Dual In Line Package</b> 0.6 inch
>NAME
>VALUE
<b>Dual In Line Package</b>
>NAME
>VALUE
Dual In Line Package 0.6 inch
Dual In Line Package
<b>Jacks</b><p>
Power Connectors<br>
Phone Connectors<br>
Cinch Connectors<br>
<author>Created by librarian@cadsoft.de</author>
<b>DC POWER JACK 2mm</b><br> Right Angle, Through Hole, Rated 5A at 16VDC, PC Terminals<p>
Source: www.spctechnology.com .. 84N1161.pdf<br>
Distributor: <b>Farnell (www.Farnell.de)</b><br>
Created by Robert Siegler
>NAME
>VALUE
DC POWER JACK 2mm Right Angle, Through Hole, Rated 5A at 16VDC, PC Terminals
Source: www.spctechnology.com .. 84N1161.pdf
Distributor: Farnell (www.Farnell.de)
Created by Robert Siegler
<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>9 Pin Serial Connector - Female PCB Mount Right Angle</h3>
0.318" style.
<p>Specifications:
<ul><li>Pin count:11</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/DB9-PCB.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>DB9</li>
</ul></p>
>NAME
>VALUE
9 Pin Serial Connector - Female PCB Mount Right Angle
0.318" style.
Specifications:
Pin count:11
Datasheet referenced for footprint
Example device(s):
DB9
<b>Jumpers</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>JUMPER</b>
1
2
3
>NAME
4
>VALUE
<b>JUMPER</b>
>NAME
>VALUE
JUMPER
JUMPER
<b>LEDs</b><p>
<author>Created by librarian@cadsoft.de</author><br>
Extended by Federico Battaglin <author><federico.rd@fdpinternational.com></author> with DUOLED
<B>LED</B><p>
5 mm, round
>NAME
>VALUE
LED
3 mm, round
LED
5 mm, round
<b>Crystals and Crystal Resonators</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>CRYSTAL</b>
>NAME
>VALUE
CRYSTAL
<b>Potentiometers</b><p>
Beckman, Copal, Piher, Spectrol, Schukat<p>
<author>Created by librarian@cadsoft.de</author>
<b>9 mm Square Rotary Potentiometers</b> Single Type with Bushing, Horizontal, Snap-in<p>
Source: Panasonic
>NAME
>VALUE
9 mm Square Rotary Potentiometers Single Type with Bushing, Horizontal, Snap-in
Source: Panasonic
<h3>SparkFun Switches, Buttons, Encoders</h3>
In this library you'll find switches, buttons, joysticks, and anything that moves to create or disrupt an electrical connection.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>Momentary Switch (Pushbutton) - SPST - PTH, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/Switches/SW016.JPG">Dimensional Drawing</a></p>
>Name
>Value
Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (B3F-1000)
Momentary Switch (Pushbutton) - SPST - PTH, Right-angle
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional Drawing
<b>Resistors in Single Inline Packages</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>Single In Line</b>
>NAME
>VALUE
1
<b>Single In Line</b>
>NAME
>VALUE
1
Single In Line
Single In Line
<b>Special Devices</b><p>
7-segment displays, switches, heatsinks, crystals, transformers, etc.<p>
<author>Created by librarian@cadsoft.de</author>
<b>DIP SWITCH</b>
1
ON
2
3
4
5
EDG
>VALUE
>NAME
<b>DIP SWITCH</b>
1
ON
2
3
4
5
6
EDG
>VALUE
>NAME
DIP SWITCH
DIP SWITCH
<b>Test Pins/Pads</b><p>
Cream on SMD OFF.<br>
new: Attribute TP_SIGNAL_NAME<br>
<author>Created by librarian@cadsoft.de</author>
<b>TEST PAD</b>
>NAME
>VALUE
>TP_SIGNAL_NAME
TEST PAD
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<b>MIC/HEADPHONE JACK</b><p>
KS-S stereo microphone/headphone jack<p>
PG203JN (Schukat)
3,5mm
>NAME
>VALUE
<b>Dual In Line Package</b>
>NAME
>VALUE
<b>Diodes</b><p>
Based on the following sources:
<ul>
<li>Motorola : www.onsemi.com
<li>Fairchild : www.fairchildsemi.com
<li>Philips : www.semiconductors.com
<li>Vishay : www.vishay.de
</ul>
<author>Created by librarian@cadsoft.de</author>
<b>DO41</b> 7.6mm x 2mm<p>
Source: http://www.diodes.com/datasheets/ds23001.pdf
>NAME
>VALUE
DO41 7.6mm x 2mm
Source: http://www.diodes.com/datasheets/ds23001.pdf
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>Laen's PCB Order Design Rules</b>
<p>
Please make sure your boards conform to these design rules.
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.