<h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find all manner of analog ICs- DACs, ADCs, video chips, op-amps, and others. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing:Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. Small Outline Package Fits JEDEC packages (narrow SOIC-8) >VALUE >NAME Small Outline Package .300 SIOC Source: http://www.maxim-ic.com/cgi-bin/packages?pkg=16%2FSOIC%2E300&Type=Max >VALUE >NAME >Name >Value TSOP16 thin small outline package >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME <h3>24-pin QFN with Exposed Thermal pad</h3> Parts that use this package: <ul> <li>A6282</li> </ul> Last modified: 8/20/10 ***UNPROVEN*** >NAME >VALUE Dual In Line Package >NAME >VALUE Dual In Line >VALUE >NAME >NAME 8M, 8-Lead, 0.118" Wide, Miniature Small Outline Package MSOP 8M-Package doc1097.pdf >NAME >VALUE SMALL OUTLINE INTEGRATED CIRCUIT body 3.9 mm/JEDEC MS-012AA >NAME >VALUE >VALUE >NAME >NAME >VALUE Small Outline package 150 mil >VALUE >NAME Dual In Line Package >NAME >VALUE Small Outline Transistor >NAME >VALUE Shrink Small Outline Package package type SS >NAME >VALUE >Value >Name Dual In Line Package >NAME >VALUE >NAME >VALUE >NAME >VALUE 8M, 8-Lead, 0.118" Wide, Miniature Small Outline Package MSOP 8M-Package doc1097.pdf >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE >VALUE >NAME >VALUE >VALUE >NAME 10 Lead Platic MSOP Source: http://www.linear.com .. LT1996 >NAME >VALUE >NAME >VALUE SOIC-08 footprint wth long lands. To fit both narrow and wide SOICs - for SOIC-to-DIP adapter board. Not recommended if you're trying to fit a specific chip. >VALUE >NAME >NAME >VALUE >NAME >VALUE >Value >Name >Name >Value >NAME >Value >Name >Value >NAME >VALUE V+ V- EPAD >NAME >VALUE >Name >Value >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE V+ V- >NAME >VALUE - + >NAME >VALUE - + >VALUE >NAME - + +V GND >Name >Value - + >NAME MSGEQ7 >Name >Value TS3A5017 >NAME >VALUE >NAME >VALUE SN74LV4052APWR >Value >Name >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE 1k 1k V+ GND OUT >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE GND PAD >NAME >VALUE 1k 1k GND OUT >VALUE >NAME V+ Vin+ Vin- >Name >Value Vss Vdd FB >NAME >VALUE >NAME >VALUE !OE S Vcc Vss >NAME >VALUE >NAME GND VCC >NAME >VALUE MUX PGA 12-bit ΔΣ ADC Voltage Reference I2C Interface Oscillator VDD GND Comparator >NAME >VALUE A0+ AIN0 A0- AIN1 A1+ AIN2 A1- AIN3 ALERT/ RDY ADDR SCL SDA >NAME >VALUE >NAME >Value >NAME >VALUE >NAME >VALUE >NAME >VALUE Vss Vdd + - >NAME >VALUE V+ V- >NAME >VALUE >NAME >VALUE Hall-effect-based isolated linear current sensor RGB component to NTSC/PAL Encoder 8-bit parallel input DAC 8-bit parallel input 2-output DAC 24-bit capacitance to digital converter 20-Bit, Pin-Programmable, Ultralow Power Sigma-Delta ADC Rail-to-rail high current output op-amp 50MHz DDS waveform generator Active noise cancellation chip. Stereo in, stereo out, two microphones. Single alkaline cell power. QFN-24 w/exposed pad. Microchip 12-bit I2C DAC, SOT23-6 Holtek voice modulator IC, COM-10574 Jellybean op-amp Low-voltage comparator Jellybean quad op-amp Jellybean rail-to-rail output op-amp Precision quad op-amp. I/O range includes negative rail. Dual low-voltage SPST analog switch SPI controlled single digital potentiometer by Microchip PID: COM-10613 SPI controlled dual digital potentiometer by Microchip 7-band graphic equalizer 16-channel analog MUX Dual-channel 4:1 analog mux General purpose bipolar Timer Single gate rail-to-rail output op-amp. Inputs extend 300mV past rails. Generic op-amp footprint 24-bit ADC Dual 4:1 analog mux Texas Instrument NTSC/PAL Decoder TI Part #TVP5150AM1 *** UNPROVEN FOOTPRINT *** Decodes NTSC video signal to YCbCr 4:2:2 signal Digital pot- up/down/increment control only 8:1 analog mux Dual 4:1 analog mux Dual 4:1 analog mux Dual timer circuit (2 555 timers in one package) low voltage audio power amplifier Low-noise, high-speed rail-to-rail CMOS op-amp High-side shunt current sense 2.7V-40V, 1% <H3>Headphone driver amp</h3> Differential to single-ended audio amplifier. 1.4W MONO CLASS-D AUDIO POWER AMPLIFIER The TPA2005D1 is a 1.4-W high efficiency filter-free class-D audio power amplifier in a BGA, QFN, or MSOP package that requires only three external components. Datasheet: <href="http://focus.ti.com/lit/ds/symlink/tpa2005d1.pdf">http://focus.ti.com/lit/ds/symlink/tpa2005d1.pdf</a> <ul> <li>1.4 W Into 8 ? From a 5V Supply at THD = 10% (Typ)</li> <li>Maximum Battery Life and Minimum Heat</li> <li>Efficiency With an 8-? Speaker: 84% at 400 mW, 79% at 100 mW</li> <li>2.8-mA Quiescent Current</li> <li>0.5-mA Shutdown Current</li> <li>Ideal for Wireless or Cellular Handsets and PDAs</li> <li>Capable of Driving an 8-? Speaker (2.5 V ? VDD ? 5.5 V) and a 4-? Speaker (2.5 V ? VDD ? 4.2 V)</li> <li>Only Three External Components</li> <li>Optimized PWM Output Stage Eliminates LC Output Filter</li> <li>Internally Generated 250-kHz Switching Frequency Eliminates Capacitor and Resistor</li> <li>Improved PSRR (-71 dB at 217 Hz) and Wide Supply Voltage (2.5 V to 5.5 V) Eliminates Need for a Voltage Regulator</li> <li>Fully Differential Design Reduces RF Rectification and Eliminates Bypass Capacitor</li> <li>Improved CMRR Eliminates Two Input Coupling Capacitors</li> </ul> TPA6111A2: Basic 150mW stereo headphone amplifier. Unity-gain stable feedback amplifier. Low noise, low distortion, 1GHz BW. Programmable waveform generator, sine, triangular, and square wave outputs. Rail to rail OpAmp with 10MHz GBP DPDT Analog Mux Vcc 2.5 to 3.3V Passes up to 5.5V at 3.3V supply 900MHz BW, 6Ω switch resistance Based on information from the SLCS006N datasheet from TI (www.ti.com). <table align=center> <tr><td><h2>Change Log</h2></td></tr> <tr> <th>Date</th><th>Author</th><th>Change</th> </tr> <tr> <td>July 16, 2008</td><td>nick@scantool.net</td><td>Device created.</td> </tr> </table> 12-Bit Del-Sig ADC Four single-ended inputs or two differential inputs Internal PGA I2C interface 2.0-5.5V Rail-to-rail input/output op-amp with 10 MHz bandwidth. Cold-Junction-Compensated K-Thermocoupleto-Digital Converter (0°C to +1024°C) The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPI™-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as +1024°C, and exhibits thermocouple accuracy of 8LSBs for temperatures ranging from 0°C to +700°C. Cold-Junction-Compensated K-Thermocoupleto-Digital Converter (-270°C to +1800°C) The MAX31855K performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 14-bit resolution, SPI™-compatible, read-only format. This converter resolves temperatures to 0.25°C, allows readings as high as +1800°C and as low as -270°C, and exhibits thermocouple accuracy of ±2°C for temperatures ranging from -200°C to +700°C for K-type thermocouples. A placeholder for generic narrow & wide SOIC8 foorptints - used on the DIP adapter board. Precision Programmable Reference Hall-effect-based isolated linear current sensor SPST NO Analog Switch 10-Ohm on resistance 1.65-5.5V Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.