Updated page breaks

git-svn-id: http://svn.linuxfromscratch.org/LFS/branches/testing/BOOK@4254 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

10 files changed, 22 insertions, 12 deletions

diff --git a/chapter05/adjusting.xml b/chapter05/adjusting.xml
index c6dde98f9..b6b31da67 100644
--- a/chapter05/adjusting.xml
+++ b/chapter05/adjusting.xml
@@ -51,6 +51,8 @@ replacing every occurrence of <quote>/lib/ld-linux.so.2</quote> with
 <para>Be sure to visually inspect the specs file in order to verify the
 intended changes have been made.</para>
 
+<beginpage/>
+
 <important><para>If working on a platform where the name of the
 dynamic linker is something other than
 <filename class="libraryfile">ld-linux.so.2</filename>, replace
diff --git a/chapter05/gcc-pass1.xml b/chapter05/gcc-pass1.xml
index df367b13a..422bb79cc 100644
--- a/chapter05/gcc-pass1.xml
+++ b/chapter05/gcc-pass1.xml
@@ -57,7 +57,9 @@ cd ../gcc-build</userinput></screen>
 <listitem><para>The purpose of this switch is to remove <filename class="directory">/usr/local/include</filename>
 from <command>gcc</command>'s include search path. This is not absolutely
 essential, however, it helps to minimize the influence of the host
-system.</para></listitem>
+system.</para>
+<beginpage/>
+</listitem>
 </varlistentry>
 
 <varlistentry>
diff --git a/chapter05/introduction.xml b/chapter05/introduction.xml
index 93203ffa5..ead56c0c3 100644
--- a/chapter05/introduction.xml
+++ b/chapter05/introduction.xml
@@ -54,6 +54,8 @@ retain the source and build directories in order for their contents to
 be used by later commands. Pay special attention to these
 reminders.</para>
 
+<beginpage/>
+
 <para>Check one last time that the <envar>LFS</envar> environment 
 variable is set up properly:</para>
 
diff --git a/chapter05/toolchaintechnotes.xml b/chapter05/toolchaintechnotes.xml
index e99381907..c8caec3c8 100644
--- a/chapter05/toolchaintechnotes.xml
+++ b/chapter05/toolchaintechnotes.xml
@@ -103,7 +103,6 @@ seen during its run of <command>./configure</command> is:</para>
         /tools/i686-pc-linux-gnu/bin/as
 checking what linker to use... /tools/i686-pc-linux-gnu/bin/ld</computeroutput></screen>
 
-<beginpage/>
 <para>This is important for the reasons mentioned above. It also
 demonstrates that GCC's configure script does not search the PATH
 directories to find which tools to use. However, during the actual
@@ -168,7 +167,6 @@ the <xref linkend="chapter-temporary-tools"/> packages all build
 against the new Glibc in <filename
 class="directory">/tools</filename>.</para>
 
-<beginpage/>
 <para>Upon entering the chroot environment in <xref
 linkend="chapter-building-system"/>, the first major package to be
 installed is Glibc, due to its self-sufficient nature mentioned above.
@@ -177,6 +175,8 @@ class="directory">/usr</filename>, perform a quick changeover of the
 toolchain defaults, then proceed in building the rest of the target
 LFS system.</para>
 
+<beginpage/>
+
 <sect2>
 <title>Notes on Static Linking</title>
 
diff --git a/chapter06/devices.xml b/chapter06/devices.xml
index 0c8e4cf36..e178b75a9 100644
--- a/chapter06/devices.xml
+++ b/chapter06/devices.xml
@@ -60,11 +60,14 @@ newly-created directories:</para>
 mount -t tmpfs none /dev/shm</userinput></screen>
 
 <para>The <command>mount</command> commands executed above may result
-in the following warning message: <computeroutput>can't open /etc/fstab: No
-such file or directory</computeroutput>. This
-file&mdash;<filename>/etc/fstab</filename>&mdash;has
-not been created yet but is also not required for the file systems to
-be properly mounted. As such, the warning can be safely ignored.</para>
+in the following warning message:</para>
+
+<para><blockquote><computeroutput>can't open /etc/fstab: No
+such file or directory.</computeroutput></blockquote></para>
+
+<para>This file&mdash;<filename>/etc/fstab</filename>&mdash;has not
+been created yet but is also not required for the file systems to be
+properly mounted. As such, the warning can be safely ignored.</para>
 </sect2>
 
 </sect1>
diff --git a/chapter06/udev.xml b/chapter06/udev.xml
index ec7224470..15c2e6f94 100644
--- a/chapter06/udev.xml
+++ b/chapter06/udev.xml
@@ -72,7 +72,7 @@ cp ../udev-config-1.rules /etc/udev/rules.d/25-lfs.rules</userinput></screen>
 class="directory">/dev</filename> or renames network interfaces (not
 in LFS) in response to hotplug events.</para>
 <indexterm zone="ch-system-udev udev"><primary sortas="b-udev">udev</primary></indexterm>
-</listitem></varlistentry>
+<beginpage/></listitem></varlistentry>
 
 <varlistentry id="udevd">
 <term><command>udevd</command></term>
diff --git a/chapter07/profile.xml b/chapter07/profile.xml
index 8e6cf3675..ace583818 100644
--- a/chapter07/profile.xml
+++ b/chapter07/profile.xml
@@ -57,7 +57,6 @@ environment variable that makes <application>Bash</application> and
 <application>Readline</application> use the
 <filename>/etc/inputrc</filename> file created earlier.</para>
 
-<beginpage/>
 <para>Replace <replaceable>[ll]</replaceable> below with the
 two-letter code for the desired language (e.g., <quote>en</quote>) and
 <replaceable>[CC]</replaceable> with the two-letter code for the
diff --git a/chapter07/udev.xml b/chapter07/udev.xml
index 4a9fa0c6a..15ce6d20d 100644
--- a/chapter07/udev.xml
+++ b/chapter07/udev.xml
@@ -65,6 +65,8 @@ class="filesystem">devfs</systemitem> became much more
 realistic.</para>
 </sect2>
 
+<beginpage/>
+
 <sect2>
 <title>Udev Implementation</title>
 
@@ -124,7 +126,6 @@ class="directory">/sys</filename> filesystem for the information
 pertaining to this new device and create the <filename
 class="directory">/dev</filename> entry for it.</para>
 
-<beginpage/>
 <para>This brings us to one problem that exists with
 <command>udev</command>, and likewise with <systemitem
 class="filesystem">devfs</systemitem> before it. It is commonly
diff --git a/chapter07/usage.xml b/chapter07/usage.xml
index 133420929..6242ab9ff 100644
--- a/chapter07/usage.xml
+++ b/chapter07/usage.xml
@@ -56,7 +56,6 @@ scripts are run, from 00 to 99&mdash;the lower the number the earlier it
 gets executed. When init switches to another run-level, the
 appropriate services get killed and others get started.</para>
 
-<beginpage/>
 <para>The real scripts are in <filename
 class="directory">/etc/rc.d/init.d</filename>. They do the actual
 work, and the symlinks all point to them. Killing links and starting
diff --git a/prologue/audience.xml b/prologue/audience.xml
index f2af60873..9c4e98219 100644
--- a/prologue/audience.xml
+++ b/prologue/audience.xml
@@ -53,6 +53,8 @@ When you are satisfied with the recipe, move on to preparing it. It
 can be made to exact specifications&mdash;broil it, bake it, deep-fry
 it, or barbecue it.</para>
 
+<beginpage/>
+
 <para>Another analogy that we can use is that of comparing LFS with a
 finished house. LFS provides the skeletal plan of a house, but it is up
 to you to build it. LFS maintains the freedom to adjust plans