Add missing colons wherever we expect the builder to key in the userinput.

git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@8174 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

14 files changed, 19 insertions, 19 deletions

diff --git a/chapter05/adjusting.xml b/chapter05/adjusting.xml
index 4e9727fc7..bad013455 100644
--- a/chapter05/adjusting.xml
+++ b/chapter05/adjusting.xml
@@ -19,7 +19,7 @@
   to be renamed so that it can be properly found and used. First, backup the
   original linker, then replace it with the adjusted linker. We'll also
   create a link to its counterpart in <filename class="directory">
-  /tools/$(gcc -dumpmachine)/bin</filename></para>
+  /tools/$(gcc -dumpmachine)/bin</filename>:</para>
 
 <screen><userinput>mv -v /tools/bin/{ld,ld-old}
 mv -v /tools/$(gcc -dumpmachine)/bin/{ld,ld-old}
@@ -37,7 +37,7 @@ ln -sv /tools/bin/ld /tools/$(gcc -dumpmachine)/bin/ld</userinput></screen>
   <para>For the sake of accuracy, it is recommended to use a copy-and-paste
   method when issuing the following command. Be sure to visually inspect the
   specs file and verify that all occurrences of <quote>/lib/ld-linux.so.2</quote>
-  have been replaced with <quote>/tools/lib/ld-linux.so.2</quote>.</para>
+  have been replaced with <quote>/tools/lib/ld-linux.so.2</quote>:</para>
 
   <important>
     <para>If working on a platform where the name of the dynamic linker is
diff --git a/chapter05/expect.xml b/chapter05/expect.xml
index 4d92964c1..c813839fe 100644
--- a/chapter05/expect.xml
+++ b/chapter05/expect.xml
@@ -43,7 +43,7 @@
     <para>Next, force Expect's configure script to use <filename>/bin/stty</filename>
     instead of a <filename>/usr/local/bin/stty</filename> it may find on the host system.
     This will ensure that our testsuite tools remain sane for the final builds of our
-    toolchain.</para>
+    toolchain:</para>
 
 <screen><userinput>cp configure{,.bak}
 sed 's:/usr/local/bin:/bin:' configure.bak &gt; configure</userinput></screen>
diff --git a/chapter05/gcc-pass1.xml b/chapter05/gcc-pass1.xml
index 7f2354fdd..75331bed3 100644
--- a/chapter05/gcc-pass1.xml
+++ b/chapter05/gcc-pass1.xml
@@ -131,7 +131,7 @@ cd ../gcc-build</userinput></screen>
     used to keep programs generic and therefore usable on all kinds of UNIX
     systems where the GNU C compiler is not always installed. Running
     <command>cc</command> leaves the system administrator free to decide
-    which C compiler to install.</para>
+    which C compiler to install:</para>
 
 <screen><userinput>ln -vs gcc /tools/bin/cc</userinput></screen>
 
diff --git a/chapter05/gcc-pass2.xml b/chapter05/gcc-pass2.xml
index df1dd5094..92874a456 100644
--- a/chapter05/gcc-pass2.xml
+++ b/chapter05/gcc-pass2.xml
@@ -78,7 +78,7 @@ sed 's@\./fixinc\.sh@-c true@' gcc/Makefile.in.orig &gt; gcc/Makefile.in</userin
     built GCC with the <option>-fomit-frame-pointer</option> compiler flag.
     Non-bootstrap builds omit this flag by default, so apply the following
     <command>sed</command> to use it in order to ensure consistent compiler
-    builds.</para>
+    builds:</para>
 
 <screen><userinput>cp -v gcc/Makefile.in{,.tmp} &amp;&amp;
 sed 's/^XCFLAGS =$/&amp; -fomit-frame-pointer/' gcc/Makefile.in.tmp \
diff --git a/chapter06/bison.xml b/chapter06/bison.xml
index 67156fb10..cb4822e17 100644
--- a/chapter06/bison.xml
+++ b/chapter06/bison.xml
@@ -41,7 +41,7 @@
     <para>The configure system causes bison to be built without support for
     internationalization of error messages if a <command>bison</command>
     program is not already in $PATH.  The following addition will correct
-    this.</para>
+    this:</para>
 
 <screen><userinput>echo '#define YYENABLE_NLS 1' &gt;&gt; config.h</userinput></screen>
 
diff --git a/chapter06/createfiles.xml b/chapter06/createfiles.xml
index 1edb40b93..4aa8d987c 100644
--- a/chapter06/createfiles.xml
+++ b/chapter06/createfiles.xml
@@ -37,7 +37,7 @@
   <para>Some programs use hard-wired paths to programs which do not exist yet. In
   order to satisfy these programs, create a number of symbolic links which will be
   replaced by real files throughout the course of this chapter after the software
-  has been installed.</para>
+  has been installed:</para>
 
 <screen><userinput>ln -sv /tools/bin/{bash,cat,grep,pwd,stty} /bin
 ln -sv /tools/bin/perl /usr/bin
@@ -109,7 +109,7 @@ EOF</userinput></screen>
   linkend="chapter-temporary-tools"/> and the
   <filename>/etc/passwd</filename> and <filename>/etc/group</filename>
   files have been created, user name and group name resolution will now
-  work.</para>
+  work:</para>
 
 <screen role="nodump"><userinput>exec /tools/bin/bash --login +h</userinput></screen>
 
diff --git a/chapter06/gcc.xml b/chapter06/gcc.xml
index 261b81a77..66fdad552 100644
--- a/chapter06/gcc.xml
+++ b/chapter06/gcc.xml
@@ -46,7 +46,7 @@
     built GCC with the <option>-fomit-frame-pointer</option> compiler flag.
     Non-bootstrap builds omit this flag by default, so apply the following
     <command>sed</command> to use it in order to ensure consistent compiler
-    builds.</para>
+    builds:</para>
 
 <screen><userinput>sed -i 's/^XCFLAGS =$/&amp; -fomit-frame-pointer/' gcc/Makefile.in</userinput></screen>
 
@@ -62,7 +62,7 @@
     compile time whether mktemp is present, and hardcodes the result in a test.
     This will cause the script to fall back to using less random names for
     temporary files.  We will be installing mktemp later, so the following sed
-    will simulate its presence.</para>
+    will simulate its presence:</para>
 
 <screen><userinput>sed -i 's/@have_mktemp_command@/yes/' gcc/gccbug.in</userinput></screen>
 
diff --git a/chapter06/gzip.xml b/chapter06/gzip.xml
index 3d09edace..a819a884a 100644
--- a/chapter06/gzip.xml
+++ b/chapter06/gzip.xml
@@ -50,7 +50,7 @@
 
 <screen><userinput>make install</userinput></screen>
 
-    <para>Move some programs that do not need to be on the root filesystem.</para>
+    <para>Move some programs that do not need to be on the root filesystem:</para>
 
 <screen><userinput>mv -v /bin/{gzexe,uncompress,zcmp,zdiff,zegrep} /usr/bin
 mv -v /bin/{zfgrep,zforce,zgrep,zless,zmore,znew} /usr/bin</userinput></screen>
diff --git a/chapter06/man-db.xml b/chapter06/man-db.xml
index 3c1822d29..cc20e8bad 100644
--- a/chapter06/man-db.xml
+++ b/chapter06/man-db.xml
@@ -117,7 +117,7 @@ EOF</userinput></screen>
     encoding when it displays them, so that they will display in both UTF-8
     and traditional locales.  Because this script is intended for limited use
     during the system build, for public data, we will not bother with error
-    checking, nor use a non-predictable temporary file name.</para>
+    checking, nor use a non-predictable temporary file name:</para>
 
 <screen><userinput>cat &gt;&gt; convert-mans &lt;&lt; "EOF"
 <literal>#!/bin/sh -e
diff --git a/chapter06/patch.xml b/chapter06/patch.xml
index fc733196f..beaac68a1 100644
--- a/chapter06/patch.xml
+++ b/chapter06/patch.xml
@@ -36,7 +36,7 @@
   <sect2 role="installation">
     <title>Installation of Patch</title>
 
-    <para>Prepare Patch for compilation.</para>
+    <para>Prepare Patch for compilation:</para>
 
 <screen><userinput>./configure --prefix=/usr</userinput></screen>
 
diff --git a/chapter06/perl.xml b/chapter06/perl.xml
index 6abe77805..9c9104eee 100644
--- a/chapter06/perl.xml
+++ b/chapter06/perl.xml
@@ -37,7 +37,7 @@
 
     <para>First create a basic <filename>/etc/hosts</filename> file which will be
     referenced in one of Perl's configuration files as well as being used used by
-    the testsuite if you run that.</para>
+    the testsuite if you run that:</para>
 
 <screen><userinput>echo "127.0.0.1 localhost $(hostname)" &gt; /etc/hosts</userinput></screen>
 
diff --git a/chapter06/readjusting.xml b/chapter06/readjusting.xml
index f7fce4c32..63d7a0dce 100644
--- a/chapter06/readjusting.xml
+++ b/chapter06/readjusting.xml
@@ -25,7 +25,7 @@
   <para>First, backup the <filename class="directory">/tools</filename> linker,
   and replace it with the adjusted linker we made in chapter 5. We'll also create
   a link to its counterpart in <filename class="directory">/tools/$(gcc
-  -dumpmachine)/bin</filename>.</para>
+  -dumpmachine)/bin</filename>:</para>
 
 <screen><userinput>mv -v /tools/bin/{ld,ld-old}
 mv -v /tools/$(gcc -dumpmachine)/bin/{ld,ld-old}
@@ -35,7 +35,7 @@ ln -sv /tools/bin/ld /tools/$(gcc -dumpmachine)/bin/ld</userinput></screen>
   <para>Next, amend the GCC specs file so that it points to the new
   dynamic linker, and so that GCC knows where to find the correct headers
   and Glibc start files. A <command>sed</command> command accomplishes
-  this.</para>
+  this:</para>
 
   <important>
     <para>If working on a platform where the name of the dynamic linker is
diff --git a/chapter06/shadow.xml b/chapter06/shadow.xml
index f51d53ffc..a1d5bccdb 100644
--- a/chapter06/shadow.xml
+++ b/chapter06/shadow.xml
@@ -81,7 +81,7 @@ find man -name Makefile -exec sed -i 's/groups\.1 / /' {} \;</userinput></screen
 
     <para>Shadow supplies other manual pages in a UTF-8 encoding.  Man-DB
     can display these in the recommended encodings by using the
-    <command>convert-mans</command> script which we installed.</para>
+    <command>convert-mans</command> script which we installed:</para>
 
 <screen><userinput>for i in de es fi fr id it pt_BR; do
     convert-mans UTF-8 ISO-8859-1 man/${i}/*.?
@@ -101,7 +101,7 @@ convert-mans UTF-8 ISO-8859-9 man/tr/*.?</userinput></screen>
     passwords longer than 8 characters. It is also necessary to change the
     obsolete <filename class="directory">/var/spool/mail</filename> location
     for user mailboxes that Shadow uses by default to the <filename
-    class="directory">/var/mail</filename> location used currently.</para>
+    class="directory">/var/mail</filename> location used currently:</para>
 
 <screen><userinput>sed -i -e 's@#MD5_CRYPT_ENAB.no@MD5_CRYPT_ENAB yes@' \
     -e 's@/var/spool/mail@/var/mail@' etc/login.defs</userinput></screen>
diff --git a/chapter07/console.xml b/chapter07/console.xml
index be36fd80c..8a614ea7d 100644
--- a/chapter07/console.xml
+++ b/chapter07/console.xml
@@ -153,7 +153,7 @@ EOF</userinput></screen>
       a framebuffer is used. If one wants to have bright colors without
       framebuffer and can live without characters not belonging to his language,
       it is still possible to use a language-specific 256-glyph font, as
-      illustrated below.</para>
+      illustrated below:</para>
 
 <screen role="nodump"><userinput>cat &gt; /etc/sysconfig/console &lt;&lt; "EOF"
 <literal># Begin /etc/sysconfig/console