Indented chapter 02.

git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@7271 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

5 files changed, 139 insertions, 124 deletions

diff --git a/chapter02/chapter02.xml b/chapter02/chapter02.xml
index ecb031a58..8200994ed 100644
--- a/chapter02/chapter02.xml
+++ b/chapter02/chapter02.xml
@@ -1,16 +1,19 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <chapter id="chapter-partitioning" xreflabel="Chapter 2">
-<?dbhtml dir="chapter02"?>
-<title>Preparing a New Partition</title>
-<?dbhtml filename="chapter02.html"?>
+  <?dbhtml dir="chapter02"?>
+  <?dbhtml filename="chapter02.html"?>
+
+  <title>Preparing a New Partition</title>
 
-<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="introduction.xml"/>
-<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="creatingpartition.xml"/>
-<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="creatingfilesystem.xml"/>
-<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="mounting.xml"/>
+  <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="introduction.xml"/>
+  <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="creatingpartition.xml"/>
+  <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="creatingfilesystem.xml"/>
+  <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="mounting.xml"/>
 
 </chapter>
diff --git a/chapter02/creatingfilesystem.xml b/chapter02/creatingfilesystem.xml
index 3466a555a..4e7346b20 100644
--- a/chapter02/creatingfilesystem.xml
+++ b/chapter02/creatingfilesystem.xml
@@ -1,41 +1,48 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="space-creatingfilesystem">
-<title>Creating a File System on the Partition</title>
-<?dbhtml filename="creatingfilesystem.html"?>
+  <?dbhtml filename="creatingfilesystem.html"?>
+
+  <title>Creating a File System on the Partition</title>
 
-<para>Now that a blank partition has been set up, the file system can
-be created. The most widely-used system in the Linux world is the
-second extended file system (ext2), but with newer high-capacity
-hard disks, journaling file systems are becoming increasingly
-popular.  We will create an ext2 file system.  Build instructions for other file
-systems can be found at <ulink
-url="&blfs-root;view/svn/postlfs/filesystems.html"/>.</para>
+  <para>Now that a blank partition has been set up, the file system can be created.
+  The most widely-used system in the Linux world is the second extended file
+  system (<systemitem class="filesystem">ext2</systemitem>), but with newer
+  high-capacity hard disks, journaling file systems are becoming increasingly
+  popular. We will create an <systemitem class="filesystem">ext2</systemitem>
+  file system. Build instructions for other file systems can be found at
+  <ulink url="&blfs-root;view/svn/postlfs/filesystems.html"/>.</para>
 
-<para>To create an ext2 file system on the LFS partition, run the following:</para>
+  <para>To create an <systemitem class="filesystem">ext2</systemitem> file
+  system on the LFS partition, run the following:</para>
 
 <screen role="nodump"><userinput>mke2fs -v /dev/<replaceable>[xxx]</replaceable></userinput></screen>
 
-<para>Replace <replaceable>[xxx]</replaceable> with the name of the LFS
-partition (<filename class="devicefile">hda5</filename> in our previous example).</para>
+  <para>Replace <replaceable>[xxx]</replaceable> with the name of the LFS
+  partition (<filename class="devicefile">hda5</filename> in our previous
+  example).</para>
 
-<note><para>Some host distributions use custom features in their filesystem
-creation tools (e2fsprogs).  This can cause problems when booting into your new
-LFS in Chapter 9, as those features will not be supported by the LFS-installed
-e2fsprogs; you will get an error similar to <quote>unsupported filesystem
-features, upgrade your e2fsprogs</quote>.  To check if your host system
-uses custom enhancements, run the following command:</para>
+  <note>
+    <para>Some host distributions use custom features in their filesystem
+    creation tools (E2fsprogs). This can cause problems when booting into your new
+    LFS in Chapter 9, as those features will not be supported by the LFS-installed
+    E2fsprogs; you will get an error similar to <quote>unsupported filesystem
+    features, upgrade your e2fsprogs</quote>. To check if your host system
+    uses custom enhancements, run the following command:</para>
 
 <screen role="nodump"><userinput>debugfs -R feature /dev/<replaceable>[xxx]</replaceable></userinput></screen>
 
-<para>If the output contains features other than: dir_index; filetype;
-large_file; resize_inode or sparse_super then your host system may have custom
-enhancements.  In that case, to avoid later problems, you should compile the
-stock e2fsprogs package and use the resulting binaries to re-create the
-filesystem on your LFS partition:</para>
+    <para>If the output contains features other than: <option>dir_index</option>;
+    <option>filetype</option>; <option>large_file</option>;
+    <option>resize_inode</option> or <option>sparse_super</option> then your host
+    system may have custom enhancements.  In that case, to avoid later problems,
+    you should compile the stock E2fsprogs package and use the resulting binaries
+    to re-create the filesystem on your LFS partition:</para>
 
 <screen role="nodump"><userinput>cd /tmp
 tar -xjvf /path/to/sources/e2fsprogs-&e2fsprogs-version;.tar.bz2
@@ -47,16 +54,16 @@ make #note that we intentionally don't 'make install' here!
 ./misc/mke2fs -v /dev/<replaceable>[xxx]</replaceable>
 cd /tmp
 rm -rfv e2fsprogs-&e2fsprogs-version;</userinput></screen>
-</note>
+  </note>
 
-<para>If a swap partition was created, it will need to be initialized for use by
-issuing the command below. If you are using an existing swap partition, there is
-no need to format it.</para>
+  <para>If a <systemitem class="filesystem">swap</systemitem> partition was
+  created, it will need to be initialized for use by issuing the command below.
+  If you are using an existing <systemitem class="filesystem">swap</systemitem>
+  partition, there is no need to format it.</para>
 
 <screen role="nodump"><userinput>mkswap /dev/<replaceable>[yyy]</replaceable></userinput></screen>
 
-<para>Replace <replaceable>[yyy]</replaceable> with the name of the swap
-partition.</para>
+  <para>Replace <replaceable>[yyy]</replaceable> with the name of the
+  <systemitem class="filesystem">swap</systemitem> partition.</para>
 
 </sect1>
-
diff --git a/chapter02/creatingpartition.xml b/chapter02/creatingpartition.xml
index d6441124a..612d1c3cf 100644
--- a/chapter02/creatingpartition.xml
+++ b/chapter02/creatingpartition.xml
@@ -1,55 +1,55 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="space-creatingpartition">
-<title>Creating a New Partition</title>
-<?dbhtml filename="creatingpartition.html"?>
-
-<para>Like most other operating systems, LFS is usually installed on
-a dedicated partition.  The recommended approach to building an LFS
-system is to use an available empty partition or, if you have enough
-unpartitioned space, to create one. However, an LFS system (in
-fact even multiple LFS systems) may also be installed on a partition
-already occupied by another operating system and the different systems
-will co-exist peacefully.  The document
-<ulink url="&hints-root;lfs_next_to_existing_systems.txt"/> explains
-how to implement this, whereas this book discusses the method of
-using a fresh partition for the installation.</para>
-
-<para>A minimal system requires a partition of around 1.3 gigabytes
-(GB).  This is enough to store all the source tarballs and compile 
-the packages. However, if the LFS system is intended to be the primary
-Linux system, additional software will probably be installed which
-will require additional space (2-3 GB). The LFS system itself will
-not take up this much room. A large portion of this requirement
-is to provide sufficient free temporary storage. Compiling
-packages can require a lot of disk space which will be reclaimed after
-the package is installed.</para>
-
-<para>Because there is not always enough Random Access Memory (RAM)
-available for compilation processes, it is a good idea to use a small
-disk partition as swap space.  This is used by the kernel to
-store seldom-used data and leave more memory available for active processes.
-The swap partition for an LFS system can be the same as the one used
-by the host system, in which case it is not necessary to create another
-one.</para>
-
-<para>Start a disk partitioning program such as
-<command>cfdisk</command> or <command>fdisk</command> with a command
-line option naming the hard disk on which the new partition will be
-created&mdash;for example <filename class="devicefile">/dev/hda</filename> for
-the primary Integrated Drive Electronics (IDE) disk. Create a Linux native
-partition and a swap partition, if needed. Please refer to 
-<filename>cfdisk(8)</filename> or <filename>fdisk(8)</filename> if you
-do not yet know how to use the programs.</para>
-
-<para>Remember the designation of the new partition (e.g.,
-<filename class="devicefile">hda5</filename>). This book will refer to this as the LFS
-partition. Also remember the designation of the swap partition. These
-names will be needed later for the <filename>/etc/fstab</filename>
-file.</para>
+  <?dbhtml filename="creatingpartition.html"?>
 
-</sect1>
+  <title>Creating a New Partition</title>
+
+  <para>Like most other operating systems, LFS is usually installed on a
+  dedicated partition. The recommended approach to building an LFS system
+  is to use an available empty partition or, if you have enough unpartitioned
+  space, to create one. However, an LFS system (in fact even multiple LFS
+  systems) may also be installed on a partition already occupied by another
+  operating system and the different systems will co-exist peacefully. The
+  document <ulink url="&hints-root;lfs_next_to_existing_systems.txt"/>
+  explains how to implement this, whereas this book discusses the method of
+  using a fresh partition for the installation.</para>
+
+  <para>A minimal system requires a partition of around 1.3 gigabytes (GB).
+  This is enough to store all the source tarballs and compile the packages.
+  However, if the LFS system is intended to be the primary Linux system,
+  additional software will probably be installed which will require additional
+  space (2-3 GB). The LFS system itself will not take up this much room.
+  A large portion of this requirement is to provide sufficient free temporary
+  storage. Compiling packages can require a lot of disk space which will be
+  reclaimed after the package is installed.</para>
 
+  <para>Because there is not always enough Random Access Memory (RAM) available
+  for compilation processes, it is a good idea to use a small disk partition as
+  <systemitem class="filesystem">swap</systemitem> space. This is used by the
+  kernel to store seldom-used data and leave more memory available for active
+  processes. The <systemitem class="filesystem">swap</systemitem> partition for
+  an LFS system can be the same as the one used by the host system, in which
+  case it is not necessary to create another one.</para>
+
+  <para>Start a disk partitioning program such as <command>cfdisk</command>
+  or <command>fdisk</command> with a command line option naming the hard
+  disk on which the new partition will be created&mdash;for example
+  <filename class="devicefile">/dev/hda</filename> for the primary Integrated
+  Drive Electronics (IDE) disk. Create a Linux native partition and a
+  <systemitem class="filesystem">swap</systemitem> partition, if needed. Please
+  refer to <filename>cfdisk(8)</filename> or <filename>fdisk(8)</filename> if
+  you do not yet know how to use the programs.</para>
+
+  <para>Remember the designation of the new partition (e.g., <filename
+  class="devicefile">hda5</filename>). This book will refer to this as
+  the LFS partition. Also remember the designation of the <systemitem
+  class="filesystem">swap</systemitem> partition. These names will be
+  needed later for the <filename>/etc/fstab</filename> file.</para>
+
+</sect1>
diff --git a/chapter02/introduction.xml b/chapter02/introduction.xml
index 209e069b8..812764536 100644
--- a/chapter02/introduction.xml
+++ b/chapter02/introduction.xml
@@ -1,15 +1,17 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="space-introduction">
-<title>Introduction</title>
-<?dbhtml filename="introduction.html"?>
+  <?dbhtml filename="introduction.html"?>
 
-<para>In this chapter, the partition which will host the LFS system is
-prepared. We will create the partition itself, create a file system
-on it, and mount it.</para>
+  <title>Introduction</title>
 
-</sect1>
+  <para>In this chapter, the partition which will host the LFS system is
+  prepared. We will create the partition itself, create a file system
+  on it, and mount it.</para>
 
+</sect1>
diff --git a/chapter02/mounting.xml b/chapter02/mounting.xml
index 37654087a..67f786203 100644
--- a/chapter02/mounting.xml
+++ b/chapter02/mounting.xml
@@ -1,56 +1,59 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="space-mounting">
-<title>Mounting the New Partition</title>
-<?dbhtml filename="mounting.html"?>
+  <?dbhtml filename="mounting.html"?>
+
+  <title>Mounting the New Partition</title>
 
-<para>Now that a file system has been created, the partition needs to
-be made accessible. In order to do this, the partition needs to be
-mounted at a chosen mount point. For the purposes of this book, it is
-assumed that the file system is mounted under <filename
-class="directory">/mnt/lfs</filename>, but the directory choice is up
-to you.</para>
+  <para>Now that a file system has been created, the partition needs to
+  be made accessible. In order to do this, the partition needs to be
+  mounted at a chosen mount point. For the purposes of this book, it is
+  assumed that the file system is mounted under <filename
+  class="directory">/mnt/lfs</filename>, but the directory choice is up
+  to you.</para>
 
-<para>Choose a mount point and assign it to the <envar>LFS</envar> 
-environment variable by running:</para>
+  <para>Choose a mount point and assign it to the <envar>LFS</envar>
+  environment variable by running:</para>
 
 <screen role="nodump"><userinput>export LFS=/mnt/lfs</userinput></screen>
 
-<para>Next, create the mount point and mount the LFS file system by
-running:</para>
+  <para>Next, create the mount point and mount the LFS file system by
+  running:</para>
 
 <screen role="nodump"><userinput>mkdir -pv $LFS
 mount -v /dev/<replaceable>[xxx]</replaceable> $LFS</userinput></screen>
 
-<para>Replace <replaceable>[xxx]</replaceable> with the designation of the LFS
-partition.</para>
+  <para>Replace <replaceable>[xxx]</replaceable> with the designation of the LFS
+  partition.</para>
 
-<para>If using multiple partitions for LFS (e.g., one for <filename
-class="directory">/</filename> and another for <filename
-class="directory">/usr</filename>), mount them using:</para>
+  <para>If using multiple partitions for LFS (e.g., one for <filename
+  class="directory">/</filename> and another for <filename
+  class="directory">/usr</filename>), mount them using:</para>
 
 <screen role="nodump"><userinput>mkdir -pv $LFS
 mount -v /dev/<replaceable>[xxx]</replaceable> $LFS
 mkdir -v $LFS/usr
 mount -v /dev/<replaceable>[yyy]</replaceable> $LFS/usr</userinput></screen>
 
-<para>Replace <replaceable>[xxx]</replaceable> and
-<replaceable>[yyy]</replaceable> with the appropriate partition
-names.</para>
+  <para>Replace <replaceable>[xxx]</replaceable> and
+  <replaceable>[yyy]</replaceable> with the appropriate partition
+  names.</para>
 
-<para>Ensure that this new partition is not mounted with permissions
-that are too restrictive (such as the nosuid, nodev, or noatime
-options). Run the <command>mount</command> command without any
-parameters to see what options are set for the mounted LFS
-partition. If <parameter>nosuid</parameter>, <parameter>nodev</parameter>,
-and/or <parameter>noatime</parameter> are set, the partition will need
-to be remounted.</para>
+  <para>Ensure that this new partition is not mounted with permissions that
+  are too restrictive (such as the <option>nosuid</option>, <option>nodev</option>,
+  or <option>noatime</option> options). Run the <command>mount</command> command
+  without any parameters to see what options are set for the mounted LFS
+  partition. If <option>nosuid</option>, <option>nodev</option>, and/or
+  <option>noatime</option> are set, the partition will need to be
+  remounted.</para>
 
-<para>Now that there is an established place to work, it is time to
-download the packages.</para>
+  <para>Now that there is an established place to work, it is time to
+  download the packages.</para>
 
 </sect1>