diff options
Diffstat (limited to 'lsb-bootscripts')
36 files changed, 4122 insertions, 0 deletions
diff --git a/lsb-bootscripts/ChangeLog b/lsb-bootscripts/ChangeLog new file mode 100644 index 000000000..04c739112 --- /dev/null +++ b/lsb-bootscripts/ChangeLog @@ -0,0 +1,114 @@ +2011-05-14 DJ Lucas <dj@linuxfromscratch.org> + * etc/default/rc.site: Added FAILURE_ACTION variable for use in remote + systems where user input is not appropriate in the event of a failure. + * etc/default/rc.site: Moved configuration of clock and hostname to rc.site + * etc/init.d/setclock: Removed provides '$time' and added provides 'hwclock'. + * etc/init.d/rc: Setup the /run mountpoint (for use by bootloging). + * sysconfig/network-devices/services/*: Moved service scripts to + /lib/network-services. + * sysconfig/network-devices/*: Moved network configuration files to + /etc/network. + * sysconfig/network-devices/*: Moved ifup and ifdown scripts to /sbin. + * sbin/ifup: Copy network configuration scritps to /run on startup. + * sbin/ifdown: Use running configuration stored in /run to stop interfaces. + * etc/sysoconfig/*: Moved sysconfig files to /etc/default. + * ect/lsb-config, lsb/manage-functions: Removed (unused). + * /: Changed layout to include full installation paths inside of archive. + +2011-04-24 Bruce Dubbs <bdubbs@linuxfromscratch.org> + * init.d/mountvirtfs: Sync to LFS-Bootscripts-20110424 - Add creation of + /run/{var,lock,shm}. + * init.d/udev: Sync to LFS-Bootscripts-20110424 - Add /dev/shm -> /run/shm + symlink. + +2011-04-18 Bruce Dubbs <bdubbs@linuxfromscratch.org> + * init.d/mountvirtfs: Change name from mountkernfs to mountvirtfs and added + mounting of /run filesystem. + +2010-10-12 DJ Lucas <dj@linuxfromscratch.org> + * init.d/swap: Added udev to Required-Start. + +2010-08-23 DJ Lucas <dj@linuxfromscratch.org> + * init.d/sendsignals: Fix missing 'then' in conditionals. Thanks to + Jeremy Huntwork for the report and correction. + +2010-06-27 DJ Lucas <dj@linuxfromscratch.org> + * init.d/sendsignals: Sync to LFS-Bootscripts-20100627 - fix killall in new + sysvinit. + * init.d/*: Standardized syntax for integer comparisons in tests. + +2010-05-29 Matthew Burgess <matthew@linuxfromscratch.org> + * init.d/udev: Only copy /lib/udev/devices/null, as Udev >= 155 copies + devices from /lib/udev/devices to /dev itself. Udevd still needs /dev/null + present before starting up though. + +2010-05-29 DJ Lucas <dj@linuxfromscratch.org> + * init.d/udev: Sync to LFS-Bootscirpts-20100529 - Add test if /dev is already + mounted and add --action=add to udevadmin trigger (Matthew Burgess). + +2010-04-27 DJ Lucas <dj@linuxfromscratch.org> + * init.d/*: Removed unneeded X-LFS-Default* lines. + * init.d/udev_retry: Add --action=add for udevtrigger (Bryan Kadzban) + * init.d/sysklogd: Corrected path of syslogd and klogd. + +2009-03-25 DJ Lucas <dj@linuxfromscratch.org> + * init.d/rc: Corrected serveral echo commands missing -e flag. Thanks to + Michael Tremer at IPFire for the corrections. + +2008-10-23 DJ Lucas <dj@linuxfromscratch.org> + * init.d/console: Removed BROKEN_COMPOSE handling because kernel patch was + accepted upstream. + +2008-09-08 DJ Lucas <dj@linuxfromscratch.org> + * init.d/rc: Corrected echo -e command - Thanks to Michael Tremer at IPFire. + +2008-09-07 DJ Lucas <dj@linuxfromscratch.org> + * Makefile: Use new initd-tools package to activate scripts. + * Makefile: $syslog and modules services cannot be a hard dependencies + due to minimal install target. + * init.d/rc: Store bootlog date in UTC. + * init.d/network: Added hard deps for local_fs, swap, and localnet (account + for /usr at network instead of $remote_fs). + +2008-08-31 DJ Lucas <dj@linuxfromscratch.org> + * init.d/*: Corrected more, and minimized dependencies in scripts. + * init.d/rc: Don't try to write to bootlog in 0 and 6. + * etc/inittab: Use /etc/rcS.d instead of /etc/rcsysinit.d - added + replacement /etc/inittab file. + +2008-08-30 DJ Lucas <dj@linuxfromscratch.org> + * init.d/*: Corrected remaining dependency errors in script headers. + +2008-05-31 DJ Lucas <dj@linuxfromscratch.org> + * init.d/udev, init.d/udev_retry: Synced with LFS-Bootscrpts-20080531 - use + udevadm. + * lsb/manage-functions: Added additional functions. + +2008-04-13 DJ Lucas <dj@linuxfromscratch.org> + * lsb/manage-functions: Added for use by scripts such as + {install,remove}_initd or chkconfig, that need to parse the LSB headers. + * init.d/*: Cleaned up script headers to reflect real Start or Stop. + +2008-03-15 DJ Lucas <dj@linuxfromscratch.org> + * lsb/init-functions: Corrected test for $pidfile in pidofproc(). + * init.d/lfs-functions: Replaced exit with return in statusproc(). + +2008-03-15 DJ Lucas <dj@linuxfromscratch.org> + * lsb/init-functions: Added missing 'stale pid file' checking for pidofproc(). + +2008-02-10 DJ Lucas <dj@linuxfromscratch.org> + * README, INSTALL: Updated documentation. + +2007-08-20 DJ Lucas <dj@linuxfromscratch.org> + * init.d/*: Synced with LFS-bootscripts. + +2007-07-05 DJ Lucas <dj@linuxfromscratch.org> + * init.d/*: Synced with LFS-bootscripts. + * init.d/rc: Removed 'stty sane' from the environment setup as it breaks + custom key configs when run from the CLI. + +2007-02-18 DJ Lucas <dj@linuxfromscratch.org> + * init.d/*: Synced with LFS-bootscripts. + +2007-02-06 DJ Lucas <dj@linuxfromscratch.org> + * /: Initial commit! diff --git a/lsb-bootscripts/ChangeLog.old b/lsb-bootscripts/ChangeLog.old new file mode 100644 index 000000000..63a7e0d79 --- /dev/null +++ b/lsb-bootscripts/ChangeLog.old @@ -0,0 +1,979 @@ +2011-04-19 Bruce Dubbs <bdubbs@linuxfromscratch.org> + * lfs/init.d/mountvirtfs: Add creation of /run/{var,lock,shm}. + * lfs/init.d/udev: Add /dev/shm -> /run/shm symlink. + +2011-04-18 Bruce Dubbs <bdubbs@linuxfromscratch.org> + * lfs/init.d/mountvirtfs: Change name from mountkernfs to mountvirtfs. + Add mounting of /run filesystem. + +2010-05-29 Matt Burgess <matthew@linuxfromscratch.org> + * lfs/init.d/udev: Only copy /lib/udev/devices/null, as Udev >= 155 copies + devices from /lib/udev/devices to /dev itself. Udevd still needs /dev/null + present before starting up though. + +2010-04-20 Bryan Kadzban <bryan@linuxfromscratch.org> + * lfs/init.d/udev, lfs/init.d/udev_retry: Add --action=add, to handle udev + version 152 and newer, which send "change" events by default in udevtrigger + now. + +2010-01-24 Matthew Burgess <matthew@linuxfromscratch.org> + * lfs/init.d/udev: Check to see if /dev is already mounted, as it may be if + under an initramfs environment. See ticket #2550. + +2009-08-14 Bryan Kadzban <bryan@linuxfromscratch.org> + * lfs/init.d/udev_retry: Use "udevadm trigger --type=failed", which + apparently replaced "--retry-failed" some time ago. "--retry-failed" is + removed in udev-146. + +2009-01-02 Bruce Dubbs <bdubbs@linuxfromscratch.org> + * lfs/init.d/functions: + * lfs/sysconfig/network-devices/ifup: + Updated line widths to accomodate pdf generation in both the above + files. + +2008-10-27 DJ Lucas <dj@linuxfromscratch.org> + * lfs/init.d/cleanfs: Removed '! -newer /proc' from find commands in + check for stale files in /var/lock and /var/run. + * Makefile: Reversed cleanfs and udev_retry scripts so that cleanfs + runs immediately after mountfs. + +2008-10-26 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: Remove stale pid files when encountered + in loadproc/killproc/reloadproc. When the bootscript specifies + a pid file to use with the "-p pidfile" argument, *proc + functions previously bailed out when the referenced file + contains an invalid pid. + +2008-10-23 DJ Lucas <dj@linuxfromscratch.org> + * lfs/init.d/console: Removed BROKEN_COMPOSE as kernel patch has + been accepted upstream. + +2008-05-21 Bryan Kadzban <bryan@linuxfromscratch.org> + * lfs/init.d/udev, lfs/init.d/udev_retry: Use new udevadm program. + +2007-08-20 DJ Lucas <dj@linuxfromscratch.org> + * lfs/init.d/setclock: Added missing 'stop' argument to usage text + +2007-08-13 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/checkfs: Don't suppress error messages from the screen. + +2007-07-18 Dan Nicholson <dnicholson@linuxfromscratch.org> + * Makefile, lfs/init.d/consolelog: New bootscript controlling the + kernel log level on the console. This is controlled by the LOGLEVEL + variable in /etc/sysconfig/console. + * lfs/init.d/modules: Remove the log level handling since this is + done in the consolelog script now. + * lfs/init.d/modules: Clean up the script by removing the file + descriptor duplication and instead just redirecting + /etc/sysconfig/modules to the input of the while loop. + +2007-06-16 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/mountfs, lfs/init.d/mountkernfs, lfs/init.d/setclock, + lfs/init.d/modules, lfs/sysconfig/network-devices/if{up,down}: + Don't suppress stderr during bootscripts unless necessary. This + would prevent potentially critical messages from reaching the screen. + +2007-04-24 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: When killproc is executed, it checks that + the process is still running, sleeps if it is, then checks again. + The sleep is 1 second in between checks. By sleeping for 0.1 seconds + in between checks, killproc is much faster as it's wasting much + less time sleeping in the normal case that the process has died + after a short delay. + +2007-04-16 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: Redirect stderr when using kill to suppress + output. + * lfs/init.d/functions: killproc() was not handling the case where a + pidfile is passed to the function. The logic with the signal to be + used was causing issues with the handling of pidfiles. This has been + fixes, and now killproc() will recheck the process if the signal + was TERM (the default) or KILL. + * lfs/init.d/functions: statusproc() has been changed to use pidofproc() + instead of the deprecated getpids(). Additionally, it now accepts + the -p argument to specify a pidfile. + * lfs/init.d/functions: Currently, statusproc() always returns + successfully, and the only way to know if the process is running + is to parse the output. This changes statusproc() to return the + status of pidofproc(), which will return unsuccessfully if the + requested process is not running. + * lfs/init.d/functions: Changed reloadproc() to use pidofproc() and + respect the -p argument for pidfiles. + * lfs/init.d/sysklogd: Remove a useless argument to reloadproc(). + +2007-03-13 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: If pidofproc() is passed the -p argument + it can bomb testing a null variable with an integer expression. + +2007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/mountfs, lfs/init.d/console, lfs/init.d/setclock, + lfs/init.d/mountkernfs: &> redirection is not supported in POSIX. + Fortunately, it's equivalent to >word 2>&1 according to bash(1). + +2007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/console: POSIX says that shells only need to trap on + signals. Trapping on ERR isn't always supported. Conditionals have + been added to set the $failed variable in spots that seemed + appropriate for checking errors. + +2007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: Use arithmetic expansion and string length, + which are both mandated by POSIX, rather than spawning two processes + every time boot_mesg() is called. + +2007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: In order to provide an `echo' which provides + handles the -e and -n options for all POSIX shells, a feature test + is added which stores its result in $ECHO. /bin/echo will be used + if the default echo is not capable. Changed the existing functions + to reference $ECHO when needed. + * lfs/init.d/console: Use $ECHO when -en is needed. + +2007-02-03 Bryan Kadzban <bryan@linuxfromscratch.org> + * ChangeLog: Rename from CHANGELOG, start using GNU style entries. + + * Makefile: Move setclock before checkfs. Fixes #1948. + +2006-11-25 Bryan Kadzban <bryan@linuxfromscratch.org> + * lfs/init.d/udev_retry: Copy Debian's "copy generated rules" initscript + code, to clean up when the rule_generator scripts run before / is + writable. (Since the rule_generator code is from Debian, I assume their + cleanup code is appropriate.) + +2006-10-15 Bryan Kadzban <bryan@linuxfromscratch.org> + * lfs/init.d/udev_retry: Fix to work with udev >= 099. + +n/a - June 2, 2006 + * Removed console config file and makefile targets. + * Removed references to /dev/bug and bugreport in udevand + udev_retry bootscripts. (DJ Lucas) + +n/a - April 17, 2006 + * Updated udev script to use the new udevsettle program. + * Added udev_retry script for systems that have /usr on a different + partition or for some other reason fail the initial replay. (Archaic) + +n/a - April 15, 2006 + * Cleaned up contrib directory. Removed: contrib/init.d, + contrib/enhanced, contrib/livecd, contrib/hotplug, and raq2 + patch. (DJ Lucas) + +n/a - April 14, 2006 + * Merged changes from udev_update branch (DJ Lucas) + * Replaced a return with an exit and reversed comment changes in + udev bootscript. (Dan Nicholson) + * Replaced walk_sysfs function in udev bootscript with new udevtrigger + program and move wait_for_uevents function inline. (DJ Lucas) + * Removed extra evaluate_retval in udev bootscript. (Ken Moffat) + * Wait for uevents to be processed in the udev script. See ticket + #1720 for details. (Matthew Burgess) + +n/a - March 21, 2006 + * Removed old references to boot_log function and arguments passed + to boot_mesg_flush in echo_* functions. (DJ Lucas) + +n/a - March 10, 2006 + * Moved src argument to ipv4-static-route service script and + removed from ipv4-static service script. (DJ Lucas) + +n/a - March 8. 2006 + * Correct sourced path in checkfs script. (Matthew Burgess) + +n/a - December 31, 2005 + * Replaced /etc/rc.d with ${rc_base} in checkfs. (Vincent Fretin) + +n/a - December 24, 2005 + * Added UTF-8 support to console script. (Alexander E. Patrakov) + +n/a - September 11, 2005 + * Removed text wraping and boot logging. + * Changed killproc to use warning if not running + * Changed 'print_status warning' to use old style output + * Fixed display error with LSB init-functions script + * Made above killproc/print_status changes in enhanced + bootscripts. + * Made logger service configurable in enhanced + bootscripts. (DJ Lucas) + +n/a - August 14, 2005 + * Added -s flag to pidofproc() for backwards + compatibility (DJ Lucas) + * Fixed erronous values returned by pidofproc() which + broke the functionality of statusproc (DJ Lucas) + +n/a - July 1, 2005 + * Changed a == to a = in lfs/init.d/functions, in the boot_mesg + function for ash compliancy (Nathan Coulson) + +n/a - June 26, 2005 + * Removed consolelog script from contrib + * Updated interactive rc script in contrib and added + README.rc-Interactive, added install target to the + Makefile. (DJ Lucas) + +3.2.2 - May 29, 2005 + * Tagged as 3.2.2 (Nathan Coulson) + +n/a - May 26, 2005 + * Added minimal target for cross-lfs book (Jim Gifford) + * Fixed raq2 patch (Jim Gifford) + +3.2.1 - May 1, 2005 + * Tagged as 3.2.1 (Nathan Coulson) + +n/a - April 17, 2005 + * removed touch from hotplug bootscript (Matthew Burgess) + * moved commands around in localnet bootscript (Andrew Benton) + +3.2.0 - March 30, 2005 + * Changed from syslog-ng to sysklogd (Archaic) + * Temporairly changed loadproc to return 0 if the program is + already running (Nathan Coulson) + * Fixed (by reverting) ifup/ifdown/network (Nathan Coulson), + Reported by Jim Gifford + * Fixed network up/down along with adding support of ONHOTPLUG + * Tagged as 3.2.0 + +n/a - March 19, 2005 + * Updated RaQ2 patch (Jim Gifford) + * Added net.agent for Hotplug of Network adapters in contrib + (Jim Gifford) + +n/a - March 16, 2005 + * Reverted the change from loadproc to start_daemon, + Moved compatibility code into one single function. + (Nathan Coulson) + * Readded the ONHOTPLUG option for ifup/ifdown (Nathan Coulson) + * Fixed killproc's output + +n/a - March 01, 2005 + * Added CHECK_LINK variable in ifconfig.*/*, so if the + interface does not exist, it will not fail. + (Nathan Coulson) + +n/a - February 19, 2005 + * Added evaluate_retval to the end of loadproc and killproc. + lsb does not say that killproc should print [ OK ], + but required for compatibility. (Nathan Coulson) + +n/a - February 9, 2005 + * Accidently mounted /dev with 775 instead of 755, fixed + (Reported by Alexander E. Patrakov) + +n/a - February 9, 2005 + * Bugfix for /dev, now mounted with 755 permission + +n/a - February 8, 2005 + * changed pidof, so it doesnt check the process id + of running bootscripts, and to process shell scripts + (Nathan Coulson) + +n/a - February 6, 2005 + * Updated main functions file with lsb functions file + Should now be LSB compliant (Nathan Coulson) + +n/a - January 10, 2005 + * Moved ONBOOT check back to network (Nathan Coulson) + * Removed ONHOTPLUG check (Nathan Coulson) + +n/a - January 6, 2005 + * fixed mountkernfs output (Nathan Coulson) + * reverted mountfs fakemounting (Nathan Coulson) + +n/a - January 5, 2005 + * Attempted to simplify network bootup files (Nathan Coulson) + * Modified mountkernfs to use mountpoint (Nathan Coulson) + * Assuming sysfs is always mounted (Nathan Coulson) + * Moved fakemount to below mounting (Nathan Coulson) + * Removed -t noramfs from umount, as we now use tmpfs (Nathan Coulson) + * moved sysctl from mountkernfs to sysctl (Nathan Coulson) + * Added -q to sysctl (Nathan Coulson) + +n/a - January 2, 2005 + * Fixed statusproc output. (DJ Lucas) + +3.1.0 - December 31, 2004 + * fixed textoutput + * Tagged as 3.1.0 + +n/a - December 30, 2004 + * Fixed name of LSB Functions file + * Changed boot_mesg to act like echo instead of echo -n, boot_mesg now + takes the -n argument if you do not wish to goto the next line + +3.0.1 - December 25, 2004 + * Released as 3.0.1 + +n/a - December 20, 2004 + * Cleaned up header. + * Added RaQ2 Patch + +n/a - December 16, 2004 + * Fixed a text typo in udev, tmpfs instead of ramfs (Steve Crosby) + +n/a - December 14, 2004 + * Fixed a warning with find in cleanfs + + +3.0 - December 8, 2004 + +n/a - December 5, 2004 + * Moved bootlog to use local2 service to avoide conflict with + dhcpcd (DJ Lucas) + +3.0-rc1 - December 1, 2004 + * rc-Interactive added (DJ Lucas) + * rc-Interactive moved to contrib (Nathan Coulson) + +n/a - November 27, 2004 + * Moved bootlog to use local1 to avoid conflict with ppd (DJ Lucas) + +n/a - November 25, 2004 + * Added consolelog to contrib/sysconfig (DJ Lucas) + * Rewrite of line wraping in boot_mesg and various fixes + related to boot_mesg changes (DJ Lucas, Alexander Patrakov) + * syslog-ng is now installed by default (Jeremy Utley) + * hotplug is now installed by default (Jeremy Utley) + * udev now uses /sbin/hotplug as the default hotplug handler + (Nathan Coulson) + * udev now mounts a tmpfs instead of a ramfs onto /dev, + as suggested by Greg K-H (Nathan Coulson) + * Created contrib/lsb, and added a LSB compliant functions file + (Nathan Coulson, and Alexander Patrakov) + * Modified find [requires find 4.2.3+] (Matthew Burgess) + +n/a - November 20, 2004 + * Modifed modules script to return to previous kernel message + level (DJ Lucas) + +n/a - November 02, 2004 + * Added sysctl -p to mountkernfs (Matthew Burgess, DJ Lucas) + +n/a - October 07, 2004 + * statusproc modified not to send data to bootlog (Nathan Coulson) + * Fixed halt commands in checkfs and udev (James Robertson) + +n/a - October 04, 2004 + * Fixes to commit on 2004/09/30 (James Robertson) + * Revert a few changes until later (Nathan Coulson) + * Added a warning about switching from a 8bit font + to a 9bit font (Alexander Patrakov) + +n/a - September 30, 2004 + * Finished off boot_mesg() (James Robertson) + * Standardized all scripts to same variable format and other + internal sh/bash function calls (James Robertson) + * Fully implemented boot_mesg across all scripts in sysconfig + and init.d (James Robertson) + +n/a - September 26, 2004 + * Added BOOTMESG_PREFIX variable, so users can optionally set a + prefix for boot messages (James Robertson) + * Fixed localnet status, to use ip instead of ifconfig (Jim Gifford) + * Added consolelog to contrib (DJ Lucas) + * loadproc and killproc can have the -nomsg parameter to avoid + calling evaluate_retval or print_status (Jim Gifford) + * boot_mesg no longer explicitly adds a \n onto end of lines + * Added a function called boot_mesg_flush, which can + dump the BOOTMESG to the bootlog. This helps avoid making + everything have to end in OK/WARN/FAIL (Nathan Coulson) + +n/a - September 24, 2004 + * Removed /dev/udev.tdb test + +n/a - September 23, 2004 + * Fixed boot_log so it output's $@'s contents, not @$ + * Added support for colors in boot_mesg (James Robertson) + * Modified udev's error checking + * Modified hotplug's error checking + * Converted checkfs's error handling to use boot_mesg with + color support + * Added $INFO color to functions (James Robertson) + +n/a - September 22, 2004 + * Removed the dependency on wl by replacing it with grep (Bryan Kadzban) + * Fixed getpids, to remove unused pids obtained from $PIDFILE + * Removed ${NORMAL} from echo "$BOOTMESG" in functions, and removed + space added to each additional sentence tacked onto BOOTMESG + * boot_mesg now handles \n's properly, and does not dimish the size of + the next line (James Robertson) + * boot_log has been added. The echo_ functions commit the log, + and then clear the BOOTMSG variable + * All scriptes have been converted to use boot_mesg + +n/a - September 21, 2004 + * boot_mesg has been enhanced. Subsequent calls will overwrite + previous text, and it will wrap text basedupon the variable ${WCOL}. + (James Robertson) + * Fixed mtu optional service typo (Kevin P Fleming) + * Added SOURCE variable to ipv4-static-route (Kevin P Fleming) + +n/a - September 16, 2004 + * nework interfaces are now brought down in reverse order + +n/a - September 15, 2004 + * Added blue bracket, from dj's 3.0-pre1 bootscript package + [echo_failure, echo_warning, and echo_ok] + * Added a new function called boot_mesg, meant to replace the echo + command. + This will give us the posibility of doing logging at a later date + * Do not set COLUMNS if COLUMNS is already set + * Modified getpids, loadproc, killproc, reloadproc, and statusproc as + done by DJ + +2.2.3 - September 04, 2004 + * Tagged as 2.2.3 + +n/a - September 04, 2004 + * Added new script to contrib for syslog-ng, which is now part of + LFS-Unstable, and a new Makefile target install-syslog-ng which + removes the sysklogd links, and replaces them with syslog-ng (JU) + +2.2.2 - August 11, 2004 + * Tagged as 2.2.2 + +n/a - August 7, 2004 + * Added missing error redirect (/dev/null) in getpids. (DJ) + +n/a - August 4, 2004 + * Added MODE, DIRMODE, and CONFMODE variables to the makefile + to allow permissions to be set at install. (DJ) + +n/a - July 31, 2004 + + * Moved PIDFILE check to getpids and removed arguments from + killproc and reloadproc. Signals are now set at begining of + funtcions script with KILLDELAY. (DJ) + * Added a optional service script which can set the MTU for a given + interface + +n/a - July 21, 2004 + + * Committed DJ Lucas's patch for the killproc function. It no + longer requires arguments if PIDFILE is set + * added --backup to all sysconfig configuration files, so they are not + replaced on a make install + +n/a - July 13, 2004 + + * Added the PEER variable to the ifconfig.*/* file, done by + Kevin P. Fleming + +2.2.1 - July 12, 2004 + + * Tagged as 2.2.1 + +n/a - July 12, 2004 + + * Hotplug was moved from rcsysinit.d to rc{1,2,3,4,5} to help bring + up/down network interfaces started by hotplug. This has been revoked + at this time + * Networking interfaces are now brought down in reverse order + * Moved the ONBOOT check to within ifup/ifdown, so we can bring up/down + the interfaces at boottime/shutdown properly, done by Kevin P. Fleming + * Use PREFIX instead of NETMASK for adding addresses in ipv4-static, + done by Kevin P. Fleming + * Fix reversal of services inside ifconfig.* directories in ifdown, + done by Kevin P. Fleming + * Add ipv4-static-route service, supplied by Kevin P. Fleming + +2.2.0 - July 12, 2004 + + * Tagged as 2.2.0 + +n/a - July 11, 2004 + + * Minor script output changes + * Repaired networking scripts broken in previous commits + +n/a - July 10, 2004 + + * We now use the ip program [from iproute2] instead of ipconfig + [net-tools] to bring up/down ethernet interfaces, and local + connections, submitted by Jim Gifford + * Removed gateway backward compatibility + * Removed ifup-eth0 ifdown-eth0 compatibility + * Removed the "assume SERVICE=static if SERVICE is unset" compatibility + * Pass the IFCONFIG environmental variable to services, so they can + locate the file with the parameters they must read + * Rename static to ipv4-static + * Stage1 for network configuration via directories, ifup and ifdown + modified, and the static service modified + * Stage2 for network configuration via directories complete, network was + modified to check within subdirectories for ONBOOT=yes. Final Stage + +n/a - July 8, 2004 + + * Changed iso01 to lat1 everywhere in /etc/sysconfig/console. This + fixes the problem with line-drawing characters. + +n/a - July 7, 2004 + + * Halted the computer, if unable to mount /dev as a ramfs + +n/a - July 6, 2004 + + * Moved the hotplug bootscript back to contrib, it will not be used in + the testing branch of the lfs book at this time + +n/a - July 4, 2004 + + * Modified ifup and ifdown to be hotplug aware + +n/a - July 3, 2004 + + * Change the check for ONBOOT into a source within a subshell + +n/a - July 1, 2004 + + * Moved hotplug start to runlevels 3-5 from sysinit + +n/a - June 30, 2004 + + * Pass -depth in cleanfs + +n/a - June 29, 2004 + + * Made the grep for ONBOOT in the network script more exact + +2.1.2 - June 27, 2004 + + * Install the automatic module loading script by default + * Tagged as 2.1.2 + +n/a - June 26, 2004 + + * Fixed font for UK in /etc/sysconfig/console + +n/a - June 23, 2004 + + * Fixed a typo in the hotplug installation procedure + +n/a - June 21, 2004 + + * Re-ordered the "mount" and "echo" commands in the udev script, to + prevent a possible race + * Converted the udev script to use udevsend/udevd + * Moved removal of /fastboot and /forcefsck to just after the root fs + becomes writable, and dropped the removal of /etc/nologin + * Cleaned and tweaked both the output and actions of cleanfs + * Removed the disabling of hotplug from sendsignals + * Removed anything that might call "rmmod" in hotplug, since rmmod is + notoriously troublesome in the 2.6.x kernels, and call it with the + stop argument from runlevels 0 and 6 + * Fixed previous modifications to the udev and cleanfs scripts + +n/a - June 20, 2004 + + * Rolled back to the /dev/.udev.tdb check from 2.1.1, since the new + one doesn't work as well, and the bug that caused it to change is + now fixed + +n/a - June 18, 2004 + + * Updated sysconfig/console + * Fixed disabling hotplug in sendsignals + * hotplug is now installed by default + +n/a - June 15, 2004 + + * Reset /proc/sys/kernel/hotplug to /bin/true when running the "stop" + command for hotplug + * Cleaned the output of the mountkernfs script + * Don't output "Creating files and directories" when it's a lie + +n/a - June 8, 2004 + + * Changed the location the optional module script is installed to + /etc/rc.d/rcsysinit.d/S05modules. + +n/a - June 4, 2004 + + * Added a echo to the > /proc/sys/kernel/hotplug line, as > did not + clear it + +n/a - June 3, 2004 + + * Added '> /proc/sys/kernel/hotplug' to sendsignals, to disable hotplug + events, which may start up new daemons + * Added elementry bootup logging support. If it can write to + /var/log/boot.log, it will + * Removed logging support, it kept / from being remounted ro + +n/a - June 2, 2004 + + * Reorganize what goes on in the udev script + * Reorganize what goes on in the hotplug script + * Moved setting /sbin/hotplug as the default hotplug manager into the + hotplug script + +n/a - June 1, 2004 + + * Removed usbfs from mountkernfs, and mountfs + * Edited the udev script, so it'll always set /proc/sys/kernel/hotplug + +n/a - May 24, 2004 + + * Added more example keymaps and font settings to /etc/sysconfig/console + * Install the /etc/sysconfig/console file by default + +n/a - May 23, 2004 + + * Changed the symlink for the optional modules script + * Removed depmod from the optional modules script + +n/a - May 20, 2004 + + * Removed the random script. There is not a strong enough case for + adding it to the lfs-bootscripts. + +n/a - May 19, 2004 + + * Added the random bootscript from blfs-bootscripts + +2.1.1 - May 18, 2004 + + * Fixed installation of modules configuration + * Tagged as 2.1.1 + +n/a - May 16, 2004 + + * Added sysklogd configuration file + * Added example /etc/sysconfig/console file + * Do not attempt to populate /dev if that directory has already been + set up earlier in bootup (such as on initramfs/initrd) + * Prevent excessive kernel output once klogd starts + * Added hotplug script + +n/a - May 15, 2004 + + * Namespace rework (enumeration of scripts is now cleaner) + * Removed directories: blfs, contrib/new-boot-0.2, contrib/rlv + +n/a - May 13, 2004 + + * Repaired the console script + * Added a check to cleanfs [createfiles], to make sure that we have + a valid devicetype, if we have type=dev + +n/a - May 11, 2004 + + * Added usbfs to mountkernfs and mountfs + +n/a - May 6, 2004 + + * Don't use loadproc in localnet, it's not meant for that + * Quote tests of $PIDFILE, so that things behave when it's empty + * Removed unused kill -0 from killproc + +2.1.0 - May 4, 2004 + + * Update to the console script, prevent install of the console script + * Chgrp /var/run/utmp to group utmp if it exists. + * Moved udev from contrib to lfs + * Moved GATEWAY setup from /etc/rc.d/init.d/network to + /etc/sysconfig/network-devices/services/static + * Use the contents of $PIDFILE, if it is set in the script + * Tagged as 2.1.0. + +n/a - April 30, 2004 + + * Moved the loadkeys script to console, and added setfont. Contributed + by Alexander E. Patrakov + +2.0.5 - April 29, 2004 + + * Added the heimdal init script. + * Tagged as 2.0.5 + +2.0.4 - April 27, 2004 + + * Tagged as 2.0.4 + +n/a - April 24, 2004 + + * Added a example script for /etc/sysconfig/createfiles + * Added a check for /sys before mounting sysfs + * Added -t noramfs to umount on /etc/rc.d/init.d/mountfs. + This will prevent /dev from being unmounted, if /proc/mounts + is symlinked to /etc/mtab + +n/a - April 18, 2004 + + * Small fix to a if statement in netfs + +n/a - April 17, 2004 + + * Added the lisa bootscript, lisa is part of the KDE Network package + * Add proper error checking to the mountfs script when writing out mtab + * Add more comments to the udev script, and conditionalize various + things that should've been done this way in the first place + * Include a template module auto-loading configuration file instead of + having syntax comments in the script itself + +n/a - April 12, 2004 + + * Added a automatic modules loading script to the contrib directory + submitted by Zack + * Edited mountkernfs, so that if you can mount sysfs on /sys, it will + be mounted at boottime. Should not affect 2.4 systems + * Since all entries are added to /etc/mtab, we should not require + the NO_FS variable. It has been removed from mountfs + * Added the udev script into the contrib directory, submitted by Zack + +2.0.3 - April 8, 2004 + + * Updated cleanfs, so it can create devices. Supplied by Zack + * Tagged as 2.0.3 + +n/a - March 31, 2004 + + * Changed "Press Enter" on unknown error to white + * Moved S10swap to S20swap. When udev is added, it has to be + ran before swap is setup + +n/a - March 29, 2004 + + * Fixed the rc5.d symlink for ntp so it creates S26ntp instead + of S26npt + * Moved S20mountkernfs to S00mountkernfs in rcsysinit.d. Will help in + the addition of udev in the future. + +n/a - March 27, 2004 + + * Changed gdm path from hardcoded to program name. There are 2 spots + gnome can be installed + +n/a - March 26, 2004 + + * Updated fam daemon script. It now uses the famd daemon instead of fam + +n/a - March 24, 2004 + + * Removed mount command out of nfs. the netfs script already handles + this + +2.0.2 - March 24, 2004 + + * Edited cleanfs to solve a problem. [if /tmp does not exist, it + could run the find command on the root filesystem] + * Tagged as 2.0.2 + +2.0.1 - March 24, 2004 + + * Found typo in BLFS MySQL Script. + * Tagged as 2.0.1 + +2.0.0 - March 23, 2004 + + * Tagged as 2.0.0, no changes from 2.0.0-pre2 + +2.0.0-pre2 - March 23, 2004 + + * Cleaned the /tmp directory on bootup. find command supplied by Zack + * Added a script which can automatically create files and directories + on startup. [Handles files/directories, permissions, and user/group]. + Created by Zack + * Added blfs/init.d/fam script + * Tagged as 2.0.0-pre2 + +n/a - March 20, 2004 + + * Added create-service-dir target and removed from create-dirs + * Changed service script install targets to use + create-service-dir + * Added check for dhcpcd service script for stale pid file + Suggested by Jeremy + * Added ifconfig to ipx service script for hosting device not up + +n/a - March 19, 2004 + + * Added support for ETCDIR, and DESTDIR in the Makefile, + compliments of Tushar + * Renamed mountproc to mountkernfs + * Updated the README file + * Coloured the print_error_message in functions red + * added stop to the setclock script + * changed echo > to > in cleanfs, suggested by winkie + * BLFS Scripts Added, collected by Zack + * Edited killproc, so it checks for running pids, rather then + the completion of the above kill command. Suggested by Zack + * Added network services found in blfs, removed adsl. Submitted by + DJ. + +1.99.4 - March 17, 2004 + + * Fixed one last halt line in checkfs script + * Moved the directory structure around + * Tagged as development release 1.99.4 + +n/a - February 28, 2004 + + * Added stty sane to the top of rc.d/init.d/rc. Hopefully, this will + fix the problems + * Also changed all instances of <ctrl-j> back to enter + +1.99.3 - February 23, 2004 + + * Tagged as development release 1.99.3 + +n/a - February 19, 2004 + + * Fixed checkfs script, so it will no longer continue to boot after a + failure in the init.d/checkfs script. Tested with the help of Andre + Müller. Fix suggested by Zack + +n/a - February 7, 2004 + + * Added -s onto grep on network stop + * Replaced a few more enter's with ctrl-j + +1.99.2 - February 6, 2004 + + * Added -s onto grep in network start + * Tagged as development release 1.99.2 + +n/a - February 4, 2004 + + * Fixed $WARNING $NORMAL and $ERROR lines, broken by changes in + functions + * Changed above fixes to work with ash + * Fixed checkfs symlink in Makefile + * functions is no longer installed as executable + * Added a check to checkfs, for errors above 16. These are caused by + being unable to run fsck, either due to user input, or a unfunctional + linux system + +1.99.1 - February 2, 2004 + + * Tagged as development release 1.99.1 + +n/a - February 2, 2004: + + * Added -d to umount in mountfs. + * Fixed network shutdown script + * Fixed Makefile rc.6 to reboot + * Added -s flag to grep command in rc.d/init.d/network - + suppresses an error if no ifconfig.* files exist + +n/a - January 30, 2004: + + * Reorganized the network system to accept multiple services. + * Ash Compliancy + * Modified some scripts to follow template + * Reorganized functions, based upon Ash Compliancy Patch + * Added a sleep 5 to failure for evaulate_retval, and changed + evaulate_retval to return true instead of false. Instead, a + exit 1 will indicate the script terminated abnormally, causing + your system to wait until you hit ctrl-J + * Switched "Press enter to continue" to "Press <ctrl-j> to continue" + * replaced 3 with $KILLDELAY in sendsignals + * mountfs does not mount network filesystems [identified by _netdev + in /etc/fstab] + * removed unneded touch out of cleanfs + +n/a - January 30, 2004: + + * New maintainers for the lfs-bootscripts package are: + Jeremy Utley (jeremy@linuxfromscratch.org) + Nathan Coulson (nathan@linuxfromscratch.org) + +1.11 - February 3rd, 2003: + + * /etc/mtab is now a real file and is handled correctly so there are + no errors even when the machine has crashed. + +1.10 - September 12th, 2002: + + * Fixed up checkfs to work with non-ext2 filesystems too (such as + minix). + +1.9 - April 5th, 2002: + + * reloadproc function had a missing '=' in the "failure 1" command (it + should be failure=1) + + * When script exists with unexpected value, you have to hit "Enter" to + continue, not just a random key as printed on the screen. + + * Moved K10sysklogd, K20sendsignals, K30mount and K40swap to + K40sysklogd, K50sendsignals, K60mount, K70swap + + * Changed the #!/bin/sh lines to #!/bin/bash - /bin/sh may not be + linked to bash but to some other shell of your choice. These scripts + are written to work with bash, so you can't just run them when + /bin/sh -> csh or ash or whatever else tickles your fancy. This + change should fix that. + +1.8 - March 14th, 2002: + + * Fixed the getpids function call so PPID's would be taken into account + properly. + + * Added the 'contrib' directory with other people's bootscript + implementations. + +1.7 - March 10th, 2002: + + * Used code from Matthias Benkmann's simpleinit-msb @ + http://winterdrache.de/linux/newboot/index.html mainly for improved + killproc function handling + + * When a requested process isn't running, or is already running, a + warning "Not running" or "Already running" will be displayed. This + was out of allignment due to a missing $CURS_UP + + * Removed "||exit" from ifup and ifdown scripts. They are useless. + + * Changed the loadkeys script to run "loadkeys -d" and removed the need + for the /etc/sysconfig/keyboard file. The kbd patch fixes the + "loadkeys -d" behaviour. + +1.6 - February 26th, 2002: + + * replaced -o %PPID with -o $PPID throughout the functions script. This + construct does what it's supposed to do (don't take PPID into account + because this would fail if a running daemon and the bootscript have + the same name). + + * added 'restart' to the swap script + + * instead of using 'echo -n' to supress newlines so the [ OK ] and + related messages allign properly, substitute this with a single echo + command that simply goes one line up before outputting anything. This + also has the benefit that when programs have their own output (like + swapon, fsck and loadkeys), there won't be an unwanted blank line + between the program's output and the [ OK ] et all. messages. + +1.5 - February 2nd, 2002: + + * added 'exit 1' to the statusproc function when there aren't enough + parameters passed to it (such as the name of process to check for) + +1.4 - February 2nd, 2002: + + * when /fastboot is detected and the message about it is printed, + don't run 'exit 1' else the rc script will cause a [FAILED] to + be printed which is undesired in this case. + +1.3 - January 30th, 2002: + * network script: changed default route detection by using the same + method as used when starting the script: check if the GATEWAY + variable is set + + * removed the emptying of /etc/mtab since it's a symlink to + /proc/mounts now + + * added the mountproc script which mounts the proc system. This is done + because we need proc mounted even before the mountfs script is ran + (now that /etc/mtab is a symlink to /proc/mounts) + + * removed all absolute paths from command calls + + * added umask 022 and PATH="/bin:/usr/bin:/sbin:/usr/sbin" to the + functions script. Every file now sources this so that umask and PATH + are set correctly + +1.2 - January 26th, 2002: + * network script: detect if a default route is set before removing it + diff --git a/lsb-bootscripts/INSTALL b/lsb-bootscripts/INSTALL new file mode 100644 index 000000000..ed4544e7e --- /dev/null +++ b/lsb-bootscripts/INSTALL @@ -0,0 +1,31 @@ +LSB-V3 Installation: + +NOTE: initd-tools must be installed prior to installation of these scripts. + +initd-tools installation: + +Download initd-tools from: +http://www.dwcab.com/downloads/initd-tools/initd-tools-0.1.3.tar.gz + + ./configure && + make && + make check && + make install + +Inline installation of lsb-v3 bootscripts: + sudo make install + +After LFS installation of lsb-v3 bootscripts: + for file in /etc/rc.d /etc/sysconfig/rc /etc/sysconfig/modules \ + /etc/sysconfig/createfiles + do + mv $file $file.bak + done && + make install + +There is no longer an upgrade path for existing installations. You will have +to reinstall any bootscripts installed by BLFS or any self written scripts. +Fortunately, this will soon be very easy for BLFS scripts as a contrib +directory containing lsb-v3 scripts will be added in the near future. + +That's it! diff --git a/lsb-bootscripts/LICENSE b/lsb-bootscripts/LICENSE new file mode 100644 index 000000000..8894a7b44 --- /dev/null +++ b/lsb-bootscripts/LICENSE @@ -0,0 +1,20 @@ +Copyright © 1999-2011 Gerard Beekmans + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies +of the Software, and to permit persons to whom the Software is furnished to do +so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. + diff --git a/lsb-bootscripts/Makefile b/lsb-bootscripts/Makefile new file mode 100644 index 000000000..a5ca9e00c --- /dev/null +++ b/lsb-bootscripts/Makefile @@ -0,0 +1,105 @@ +ETCDIR=/etc +EXTDIR=${DESTDIR}${ETCDIR} +MODE=754 +DIRMODE=755 +CONFMODE=644 + +all: install + +create-dirs: + if test ! -d /${DESTDIR}; then install -d -m ${DIRMODE} ${EXTDIR}; fi + install -d -m ${DIRMODE} ${EXTDIR}/rc0.d + install -d -m ${DIRMODE} ${EXTDIR}/rc1.d + install -d -m ${DIRMODE} ${EXTDIR}/rc2.d + install -d -m ${DIRMODE} ${EXTDIR}/rc3.d + install -d -m ${DIRMODE} ${EXTDIR}/rc4.d + install -d -m ${DIRMODE} ${EXTDIR}/rc5.d + install -d -m ${DIRMODE} ${EXTDIR}/rc6.d + install -d -m ${DIRMODE} ${EXTDIR}/rcS.d + install -d -m ${DIRMODE} ${EXTDIR}/init.d + install -d -m ${DIRMODE} ${EXTDIR}/default + install -d -m ${DIRMODE} ${EXTDIR}/network + install -d -m ${DIRMODE} ${DESTDIR}/sbin + install -d -m ${DIRMODE} ${DESTDIR}/lib/lsb + install -d -m ${DIRMODE} ${DESTDIR}/lib/network-services + +install: create-dirs + install -m ${MODE} etc/init.d/checkfs ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/cleanfs ${EXTDIR}/init.d/ + install -m ${CONFMODE} etc/init.d/lfs-functions ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/halt ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/console ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/localnet ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/modules ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/mountfs ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/mountvirtfs ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/network ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/rc ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/reboot ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/sendsignals ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/setclock ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/sysklogd ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/swap ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/sysctl ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/template ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/udev ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/udev_retry ${EXTDIR}/init.d/ + install -m ${CONFMODE} lib/lsb/init-functions ${DESTDIR}/lib/lsb/ + if [ ! -f ${EXTDIR}/default/createfiles ]; then install -m ${CONFMODE} etc/default/createfiles ${EXTDIR}/default/; fi + if [ ! -f ${EXTDIR}/default/modules ]; then install -m ${CONFMODE} etc/default/modules ${EXTDIR}/default/; fi + if [ ! -f ${EXTDIR}/default/rc ]; then install -m ${CONFMODE} etc/default/rc ${EXTDIR}/default/; fi + if [ ! -f ${EXTDIR}/default/rc.site ]; then install -m ${CONFMODE} etc/default/rc.site ${EXTDIR}/default/; fi + if [ -f ${EXTDIR}/inittab ]; then install -m ${CONFMODE} ${EXTDIR}/inittab ${EXTDIR}/inittab.bak; fi + install -m ${CONFMODE} etc/inittab ${EXTDIR}/ + install -m ${MODE} sbin/ifup ${DESTDIR}/sbin/ + install -m ${MODE} sbin/ifdown ${DESTDIR}/sbin/ + install -m ${MODE} lib/network-services/ipv4-static ${DESTDIR}/lib/network-services/ + install -m ${MODE} lib/network-services/ipv4-static-route ${DESTDIR}/lib/network-services/ + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/checkfs + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/cleanfs + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/halt + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/console + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/localnet + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/modules + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/mountfs + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/mountvirtfs + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/network + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/reboot + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/sendsignals + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/sysklogd + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/swap + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/sysctl + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/udev + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/udev_retry + +minimal: create-dirs + install -m ${MODE} etc/init.d/checkfs ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/cleanfs ${EXTDIR}/init.d/ + install -m ${CONFMODE} etc/init.d/lfs-functions ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/halt ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/localnet ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/mountfs ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/mountvirtfs ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/rc ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/reboot ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/sendsignals ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/detclock ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/swap ${EXTDIR}/init.d/ + install -m ${MODE} etc/init.d/udev ${EXTDIR}/init.d/ + install -m ${CONFMODE} lib/lsb/init-functions ${DESTDIR}/lib/lsb/ + if [ ! -f ${EXTDIR}/default/rc ]; then install -m ${CONFMODE} default/rc ${EXTDIR}/default/; fi + if [ -f ${EXTDIR}/inittab ]; then install -m ${CONFMODE} ${EXTDIR}/inittab ${EXTDIR}/inittab.bak; fi + install -m ${CONFMODE} etc/inittab ${EXTDIR}/ + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/checkfs + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/cleanfs + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/halt + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/localnet + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/mountfs + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/mountvirtfs + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/reboot + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/sendsignals + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/swap + /usr/lib/lsb/install_initd ${EXTDIR}/init.d/udev + +.PHONY: all create-dirs install minimal + diff --git a/lsb-bootscripts/README b/lsb-bootscripts/README new file mode 100644 index 000000000..93df70e58 --- /dev/null +++ b/lsb-bootscripts/README @@ -0,0 +1,96 @@ +LSB-Bootscripts README + +The scripts contained in this directory are a complete rewrite of the +boot scripts from LFS-6.1. As is usually the case with a rewrite, there have +been many changes: + +LSB Version 4.1 Compliant Scripts - Immediately noticable are the LSB headers +in the rc.d scripts themselves. Each script contains a usable header to +allow for automating both the installation of, and determining proper +execution order for the startup scripts. These values can also be used +directly in parallel boot setups. Additionally, messages are displayed in +one single write to the screen, after exit status is determined, so that +they can be used in parallel setups. I am not sure if this was the only +barrier to auto language translation in the previous bootscripts. Further, +the messages are created from parts and only written to the screen in a +single command, so maybe no help at all WRT translated boot messages. + +AS OF 20080907, THESE SCRIPTS REQUIRE THE initd-tools PACKAGE. +Dan Nicholson has recently released an initd-tools package that contain +LSB compliant install_initd and remove_initd programs written in C. +See the INSTALL file for installation instructions. + +Path changes - The base directory for the bootscripts is now /etc. This is +mostly to conform with mainstream distros. Of course, this is still +configurable in /etc/default/rc.site. The rcsysinit.d directory has been +removed and and replaced with the shorter rcS.d. /etc/sysconfig has been +removed in favor of /etc/default. The network service scripts have been moved +to /lib/network-services and the the network configuration files to +/etc/network. Values for short, and relatively static, configuration files +(clock and network) have been included in the rc.site file directly. + +Distribution Independent - this original goal for the LFS scripts has been +stretched even further by providing both a global rc config file that +contains (generally) static values, and a new rc.site config file to allow +customization of messages as diplayed to the end user during the boot +process. The format of messages printed to the screen is adjustable +here. Other options that were available in the previous versions of the +lfs-bootscripts, and additional options such as message format and color, are +configurable by the /etc/sysconfig/rc.site file. + +Single Environment - The rc script has been rewritten completely to allow a +single source of the boot configuration per runlevel change. This config +is inherited from rc's environment as opposed to being sourced everytime a +script is run. This does result in a negledgable decrease in boot time, but +is simply better in principle. + +Boot Logging - The previous incarnation of the boot log didn't begin +recording events until the root filesystem was mounted read/write. This has +been corrected by providing the /run tempfs mount immediately after init hands +control to the rc script. The bootlog is generated on the tempfs and then +passed to the log file before login. Additionally, shutdown events are no +longer recorded in the bootlog. They were pretty much useless and it really +wasn't what I'd call a *boot* log. Boot logging is on by default and is +configurable in the /etc/default/rc.site file via the "BOOTLOG_ENAB" parameter. + +Interactive Boot - This feature has been included by default, and is a +little more polished than in previous versions. It does introduce a two +second delay in the boot process (so that you have time to press a button +to select interactive mode). This time value, and the option prompt itself, +is configurable in the /etc/default/rc.site file via the "itime" and "iprompt" +variables respectively. + +LSB Functions - The previous lfs-bootscripts sourced a functions file +located at /etc/rc.d/init.d/functions. This file has been renamed +$distro-functions to segregate it from the old. The name is configurable +by the rc.site configuration file ("DISTRO_MINI"). LSB defined functions are +used where possible througout the individual scripts, but the $distro-functions +file provides, easy to use wraper functions that start, stop, reload, +force-reload, and restart programs, evaluate the numerical LSB return values, +and print status messages to the screen and boot log. Both distro functions and +LSB functions are documented directly in the scritps located at +/etc/init.d/$distro-functions and /lib/lsb/init-functions respectively. + +Pretier - By default, successful boot messages are prefixed with a single green +astrik character, warning messages with two yellow astirks, and failures are +prefixed with three red astriks. This provides a second 'quick glance' status +when watching the boot messages fly by. Again, the prefixes are configurable +(or completely removable) in the /etc/default/rc.site file. + +ConsoleLog - The sysctl script runs much earlier in the boot process, as a +result, it negates the need for the consolelog script. Set 'kernel.printk = X' +in your /etc/sysctl.conf file for equivalent functionality. + +Complete Rewrite - That doesn't mean that code wasn't reused when possible, +so to Alexander Patrakov, Archiac, Bruce Dubbs, Bryan Kadzban, Dan Nicholson, +Gerard Beekmans, Jeremy Huntwork, Jim Gifford, Mathias Benkmans, Matthew +Burgess, Nathan Coulson, and countless other contributors: Thanks for the help +and guidance. + +Please report any bugs to lfs-dev@linuxfromscratch.org. + +Thanks. + +-- DJ Lucas +dj@linuxfromscratch.org + diff --git a/lsb-bootscripts/etc/default/createfiles b/lsb-bootscripts/etc/default/createfiles new file mode 100644 index 000000000..c4c2428cb --- /dev/null +++ b/lsb-bootscripts/etc/default/createfiles @@ -0,0 +1,28 @@ +######################################################################## +# Begin /etc/default/createfiles +# +# Description : Createfiles script config file +# +# Authors : +# +# Version : 00.00 +# +# Notes : The syntax of this file is as follows: +# if type is equal to "file" or "dir" +# <filename> <type> <permissions> <user> <group> +# if type is equal to "dev" +# <filename> <type> <permissions> <user> <group> <devtype> <major> <minor> +# +# <filename> is the name of the file which is to be created +# <type> is either file, dir, or dev. +# file creates a new file +# dir creates a new directory +# dev creates a new device +# <devtype> is either block, char or pipe +# block creates a block device +# char creates a character deivce +# pipe creates a pipe, this will ignore the <major> and <minor> fields +# <major> and <minor> are the major and minor numbers used for the device. +######################################################################## + +# End /etc/sysconfig/createfiles diff --git a/lsb-bootscripts/etc/default/modules b/lsb-bootscripts/etc/default/modules new file mode 100644 index 000000000..40d1894c9 --- /dev/null +++ b/lsb-bootscripts/etc/default/modules @@ -0,0 +1,18 @@ +######################################################################## +# Begin /etc/default/modules +# +# Description : Module auto-loading configuration +# +# Authors : +# +# Version : 00.00 +# +# Notes : The syntax of this file is as follows: +# <module> [<arg1> <arg2> ...] +# +# Each module should be on it's own line, and any options that you want +# passed to the module should follow it. The line deliminator is either +# a space or a tab. +######################################################################## + +# End /etc/default/modules diff --git a/lsb-bootscripts/etc/default/rc b/lsb-bootscripts/etc/default/rc new file mode 100644 index 000000000..96bd476d9 --- /dev/null +++ b/lsb-bootscripts/etc/default/rc @@ -0,0 +1,44 @@ +# Begin /etc/default/rc + +# Author: DJ Lucas - dj@linuxfromscratch.org +# Version: 1.0 LSB V.3.1 + +# Global variable inherited by initscripts are in caps +# Local variables for the rc script are in lowercase + +# Source site specific rc configuration +. /etc/default/rc.site + +# This sets default terminal options. +# stty sane - this has been removed as nobody recalls +# the reason for it in the first place - if no problems arize, +# then it will be removed completely at a later date. + +# Setup default values for the environment +umask 022 +PATH="/bin:/sbin" + +# Find current screen size +if [ -z "${COLUMNS}" ]; then + COLUMNS=$(stty size) + COLUMNS=${COLUMNS##* } +fi + +# When using remote connections, such as a serial port, stty size returns 0 +if [ "${COLUMNS}" = "0" ]; then + COLUMNS=80 +fi + +## Measurements for positioning result messages +COL=$((${COLUMNS} - 8)) +WCOL=$((${COL} - 2)) + +# Set Cursur Position Commands, used via echo -e +SET_COL="\\033[${COL}G" # at the $COL char +SET_WCOL="\\033[${WCOL}G" # at the $WCOL char +CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char + +# Export the environment variables so they are inherited by the scripts +export PATH SET_COL SET_WCOL CURS_UP BOOTLOG_ENAB + +# End /etc/default/rc diff --git a/lsb-bootscripts/etc/default/rc.site b/lsb-bootscripts/etc/default/rc.site new file mode 100644 index 000000000..f617c16cb --- /dev/null +++ b/lsb-bootscripts/etc/default/rc.site @@ -0,0 +1,77 @@ +# Set base directory information +RC_BASE="/etc" +RC_FUNCTIONS="${RC_BASE}/init.d/lfs-functions" + +# Location of network device scripts and config files +NETWORK_DEVICES="/etc/network" + +# Bootlogging (requires a tempfs mount) +BOOTLOG_ENAB="yes" + +# Hostname +HOSTNAME=<lfs> + +# System time variables +UTC=1 +CLOCKPARAMS= + +# Manual input is not appropriate on remote systems. Define what happens when +# an error is encountered that interupts the boot/shutdown proceess +FAILURE_ACTION="read ENTER" + +# Distro Information +DISTRO="Linux From Scratch" # The distro name +DISTRO_CONTACT="lfs-dev@linuxfromscratch.org" # Bug report address +DISTRO_MINI="lfs" # Short name used in filenames for distro config + +# Define custom colors used in messages printed to the screen +BRACKET="\\033[1;34m" # Blue +FAILURE="\\033[1;31m" # Red +INFO="\\033[1;36m" # Cyan +NORMAL="\\033[0;39m" # Grey +SUCCESS="\\033[1;32m" # Green +WARNING="\\033[1;33m" # Yellow + +# Prefix boot messages for easier reading on framebuffer consoles +PREFIX_SUCCESS=" ${SUCCESS}*${NORMAL} " +PREFIX_WARNING="${WARNING}**${NORMAL} " +PREFIX_FAILURE="${FAILURE}***${NORMAL}" + +# Export varialbles so that they are inherited by the initscripts +export RC_BASE RC_FUNCTIONS NETWORK_DEVICES BOOTLOG_ENAB +export HOSTNAME UTC CLOCKPARAMS FAILURE_ACTION +export DISTRO DISTRO_CONTACT DISTRO_MINI +export BRACKET FAILURE INFO NORMAL SUCCESS WARNING +export PREFIX_SUCCESS PREFIX_WARNING PREFIX_FAILURE + +# Interactive startup +iprompt="yes" # Wether to display the interactive boot promp +itime="2" # The ammount of time (in seconds) to display the prompt +dlen="29" # The total length of the distro welcome string +ilen="38" # The total length of the interactive message +welcome_message="Welcome to ${INFO}${DISTRO}${NORMAL}" +i_message="Press '${FAILURE}I${NORMAL}' to enter interactive startup" + +# Error message displayed when a script's exit value is not zero +print_error_msg() +{ + # ${link} and ${error_value} are defined by the rc script + echo -e "${FAILURE}FAILURE: You should not be reading this error message." + echo -e "" + echo -e -n "${FAILURE}It means that an unforseen error took place in" + echo -e -n "${INFO} ${link}" + echo -e "${FAILURE}," + echo -e "${FAILURE}which exited with a return value of ${error_value}." + echo -e "" + echo -e -n "${FAILURE}If you are able to track this error down to a bug" + echo -e "${FAILURE}in one of the files" + echo -e -n "provided by ${INFO}${DISTRO}${FAILURE}, " + echo -e -n "${FAILURE}please be so kind to inform us at " + echo -e "${INFO}${DISTRO_CONTACT}${FAILURE}.${NORMAL}" + echo -e "" + echo -e "${INFO}Press Enter to continue..." + echo -e "${NORMAL}" + $FAILURE_ACTION +} + + diff --git a/lsb-bootscripts/etc/init.d/checkfs b/lsb-bootscripts/etc/init.d/checkfs new file mode 100644 index 000000000..1e3efed9b --- /dev/null +++ b/lsb-bootscripts/etc/init.d/checkfs @@ -0,0 +1,103 @@ +#!/bin/sh +# Begin /etc/init.d/checkfs + +### BEGIN INIT INFO +# Provides: checkfs +# Required-Start: udev swap +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Checks local filesystems before mounting. +# Description: Checks local filesystmes before mounting. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + if [ -f /fastboot ]; then + echo "${INFO}/fastboot found!" + log_success_msg "Will not perform file system checks as requested." + exit 0 + fi + + mount -n -o remount,ro / >/dev/null + if [ ${?} -ne 0 ] + then + log_failure_msg "Mounting root file system in read-only mode" + echo -e "${FAILURE}FAILURE:\n" + echo -e -n "${FAILURE}Cannot check root filesystem because it " + echo -e "${FAILURE}could not be mounted" + echo -e "${FAILURE}in read-only mode.\n\n" + echo -e -n "${FAILURE}After you press Enter, this system will be " + echo -e "${FAILURE}halted and powered off.\n" + echo -e "${INFO}Press enter to continue...${NORMAL}" + $FAILURE_ACTION + /etc/rc.d/init.d/halt stop + fi + + if [ -f /forcefsck ] + then + echo "${INFO}/forcefsck found!" + log_success_msg "${INFO}Forcing file system checks as requested." + options="-f" + else + options="" + fi + + # Note: -a option used to be -p; but this fails e.g. + # on fsck.minix + fsck ${options} -a -A -C -T + error_value=${?} + + if [ "${error_value}" -eq 0 ] + then + log_success_msg "Checking file systems..." + elif [ "${error_value}" -eq 1 ] + then + log_warning_msg "Checking file systems..." + echo -e "${WARNING}WARNING:\n" + echo -e "${WARNING}File system errors were found and have been" + echo -e "${WARNING}corrected. You may want to double-check that" + echo -e "${WARNING}everything was fixed properly.${NORMAL}" + elif [ "${error_value}" -eq 2 -o "${error_value}" -eq 3 ]; then + log_warning_msg "Checking file systems..." + echo -e "${WARNING}WARNING:\n" + echo -e "${WARNING}File system errors were found and have been been" + echo -e "${WARNING}corrected, but the nature of the errors require" + echo -e "${WARNING}this system to be rebooted.\n" + echo -e "After you press enter, this system will be rebooted.\n" + echo -e "${INFO}Press Enter to continue...${NORMAL}" + $FAILURE_ACTION + reboot -f + elif [ "${error_value}" -gt 3 -a "${error_value}" -lt 16 ]; then + log_failure_msg "Checking file systems..." + echo -e "${FAILURE}FAILURE:\n" + echo -e "${FAILURE}File system errors were encountered that could" + echo -e "${FAILURE}not be fixed automatically. This system cannot" + echo -e "${FAILURE}continue to boot and will therefore be halted" + echo -e "${FAILURE}until those errors are fixed manually by a" + echo -e "${FAILURE}System Administrator.\n" + echo -e "${FAILURE}After you press Enter, this system will be" + echo -e "${FAILURE}halted and powered off.\n" + echo -e "${INFO}Press Enter to continue...${NORMAL}" + $FAILURE_ACTION + /etc/rc.d/init.d/halt stop + elif [ "${error_value}" -ge 16 ]; then + log_failure_msg "Checking file systems..." + echo -e "${FAILURE}FAILURE:\n" + echo -e "${FAILURE}Unexpected Failure running fsck. Exited with error" + echo -e "${FAILURE}code: ${error_value}.${NORMAL}" + exit ${error_value} + fi + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End /etc/init.d/checkfs diff --git a/lsb-bootscripts/etc/init.d/cleanfs b/lsb-bootscripts/etc/init.d/cleanfs new file mode 100644 index 000000000..2e71456ee --- /dev/null +++ b/lsb-bootscripts/etc/init.d/cleanfs @@ -0,0 +1,106 @@ +#!/bin/sh +# Begin /etc/init.d/cleanfs + +### BEGIN INIT INFO +# Provides: cleanfs +# Required-Start: $local_fs +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Cleans temporary directories early in the boot process. +# Description: Cleans temporary directories /var/run, /var/lock, and +# /tmp. cleanfs also creates /var/run/utmp and any files +# defined in /etc/default/createfiles. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +# Function to create files/directory on boot. +create_files() +{ + # Read in the configuration file. + exec 9>&0 < /etc/default/createfiles + while read name type perm usr grp dtype maj min junk + do + # Ignore comments and blank lines. + case "${name}" in + ""|\#*) continue ;; + esac + + # Ignore existing files. + if [ ! -e "${name}" ] + then + # Create stuff based on its type. + case "${type}" in + dir) + mkdir "${name}" + ;; + file) + :> "${name}" + ;; + dev) + case "${dtype}" in + char) + mknod "${name}" c ${maj} ${min} + ;; + block) + mknod "${name}" b ${maj} ${min} + ;; + pipe) + mknod "${name}" p + ;; + *) + echo -e -n "\n${WARNING}Unknown device type: ${dtype}" + echo -e "${NORMAL}" + ;; + esac + ;; + *) + echo -e "\n${WARNING}Unknown type: ${type}${NORMAL}" + continue + ;; + esac + + # Set up the permissions, too. + chown ${usr}:${grp} "${name}" + chmod ${perm} "${name}" + fi + done + exec 0>&9 9>&- +} + +case "${1}" in + start) + message="Cleaning file systems: " + + message="${message}${INFO} /tmp" + find /tmp -xdev -mindepth 1 ! -name lost+found \ + -delete || failed=1 + + > /var/run/utmp + if grep -q '^utmp:' /etc/group ; then + chmod 664 /var/run/utmp + chgrp utmp /var/run/utmp + fi + + (exit ${failed}) + evaluate_retval standard + + if egrep -qv '^(#|$)' /etc/default/createfiles 2>/dev/null + then + message="Creating files and directories..." + create_files + evaluate_retval standard + fi + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End /etc/init.d/cleanfs + diff --git a/lsb-bootscripts/etc/init.d/console b/lsb-bootscripts/etc/init.d/console new file mode 100644 index 000000000..45c87b6dd --- /dev/null +++ b/lsb-bootscripts/etc/init.d/console @@ -0,0 +1,96 @@ +#!/bin/sh +# Begin $rc_base/init.d/console + +### BEGIN INIT INFO +# Provides: console +# Required-Start: +# Should-Start: $local_fs +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Sets up a localised console. +# Description: Sets up fonts and language settings for the user's +# local as defined by /etc/default/console. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +MESSAGE="Setting up Linux console..." + +# Native English speakers probably don't have /etc/default/console at all +if [ -f /etc/default/console ] +then + . /etc/default/console +fi + +is_true() { + [ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ] +} + +failed=0 + +case "${1}" in + start) + # There should be no bogus failures below this line! + + # Figure out if a framebuffer console is used + [ -d /sys/class/graphics/fb0 ] && USE_FB=1 || USE_FB=0 + + # Figure out the command to set the console into the + # desired mode + is_true "${UNICODE}" && + MODE_COMMAND="echo -en '\033%G' && kbd_mode -u" || + MODE_COMMAND="echo -en '\033%@\033(K' && kbd_mode -a" + + # On framebuffer consoles, font has to be set for each vt in + # UTF-8 mode. This doesn't hurt in non-UTF-8 mode also. + + ! is_true "${USE_FB}" || [ -z "${FONT}" ] || + MODE_COMMAND="${MODE_COMMAND} && setfont ${FONT}" + + # Apply that command to all consoles mentioned in + # /etc/inittab. Important: in the UTF-8 mode this should + # happen before setfont, otherwise a kernel bug will + # show up and the unicode map of the font will not be + # used. + # FIXME: Fedora Core also initializes two spare consoles + # - do we want that? + + for TTY in `grep '^[^#].*respawn:/sbin/agetty' /etc/inittab | + grep -o '\btty[[:digit:]]*\b'` + do + openvt -f -w -c ${TTY#tty} -- \ + /bin/sh -c "${MODE_COMMAND}" || failed=1 + done + + # Set the font (if not already set above) and the keymap + is_true "${USE_FB}" || [ -z "${FONT}" ] || + setfont $FONT || + failed=1 + [ -z "${KEYMAP}" ] || + loadkeys ${KEYMAP} >/dev/null 2>&1 || + failed=1 + [ -z "${KEYMAP_CORRECTIONS}" ] || + loadkeys ${KEYMAP_CORRECTIONS} >/dev/null 2>&1 || + failed=1 + + # Convert the keymap from $LEGACY_CHARSET to UTF-8 + [ -z "$LEGACY_CHARSET" ] || + dumpkeys -c "$LEGACY_CHARSET" | + loadkeys -u >/dev/null 2>&1 || + failed=1 + + # If any of the commands above failed, the trap at the + # top would set $failed to 1 + ( exit $failed ) + evaluate_retval standard + ;; + *) + echo $"Usage:" "${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/console diff --git a/lsb-bootscripts/etc/init.d/halt b/lsb-bootscripts/etc/init.d/halt new file mode 100644 index 000000000..cdcd90778 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/halt @@ -0,0 +1,30 @@ +#!/bin/sh +# Begin $RC_BASE/init.d/halt + +### BEGIN INIT INFO +# Provides: halt +# Required-Start: +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: 0 +# Default-Stop: +# Short-Description: Halts the system. +# Description: Halts the System. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + stop) + log_success_msg "Halting System..." + halt -d -f -i -p + ;; + *) + echo "Usage: {stop}" + exit 1 + ;; +esac + +# End /etc/init.d/halt diff --git a/lsb-bootscripts/etc/init.d/lfs-functions b/lsb-bootscripts/etc/init.d/lfs-functions new file mode 100644 index 000000000..b0fef4c29 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/lfs-functions @@ -0,0 +1,214 @@ +# Begin /etc/init.d/lfs-functions +# Provides LFS specific functions for LSB style bootscripts + +################################# chkstat() ################################### +# chk_stat checks the status of a script by checking for both a binary file # +# to execute, and if set, a config file that may be needed for the program # +# to run successfully. The calling script will exit with a return value of 5 # +# if the binary does not exist, and a value of 6 if the needed config file is # +# unavailable as per LSB requirements. This function accepts zero, one, or # +# two string arguments. If arguments are passed, the first must be a bin # +# file. If a second argument is passed, it is interpreted as the config # +# file. Optionally, zero arguments can be passed if BIN_FILE, and optinally # +# CONFIG_FILE are set in the calling script. # +############################################################################### +chk_stat() +{ + if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then + BIN_FILE="${1}" + if [ -z "${2}" ]; then + CONFIG_FILE="" + else + CONFIG_FILE="${2}" + fi + elif [ -z "${BIN_FILE}" ]; then + echo "Usage: 'chk_stat BIN_FILE CONFIG_FILE'" + exit 1 # Generic Error + fi + + if [ ! -e "${BIN_FILE}" ]; then + log_failure_msg "${BIN_FILE} not installed" && + exit 5 + fi + + if [ ! -z "${CONFIG_FILE}" ]; then + if [ ! -e "${CONFIG_FILE}" ]; then + log_failure_msg "${CONFIG_FILE} does not exist" && + exit 6 + fi + fi +} + +################################ loadproc() ################################### +# loadproc is just a wraper to start_daemon for simple scripts, which will # +# require no arguments if $BIN_FILE is set. # +############################################################################### +loadproc() +{ + start_daemon "${BIN_FILE}" "${@}" +} + +################################ endproc() #################################### +# endproc, like loadproc, is just a wraper to killproc for simplicity and is # +# dependent on $BIN_FILE being set. # +############################################################################### +endproc() +{ + killproc "${BIN_FILE}" "${@}" +} + +############################### statusproc() ################################## +# statusproc checks the status of a particular binary and displays the # +# appropriate message (running or not running) and exits on the return value # +# of pidofproc. This function accepts two string arguments or zero arguments # +# if BIN_FILE and MESSAGE are set, else it requires the bin file as the first # +# argument, and the message as the second. Both must be enclosed in quotes. # +############################################################################### +statusproc() +{ + if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then + BIN_FILE="${1}" + MESSAGE="${2}" + elif [ -z "${BIN_FILE}" -o -z "${MESSAGE}" ]; then + echo "Usage: 'statusproc BIN_FILE MESSAGE'" + exit 1 # Generic Error + fi + + pidlist=`pidofproc "${BIN_FILE}"` + STATUS=$? + echo "Checking ${MESSAGE} status:" + if [ "${STATUS}" -eq "0" ]; then + log_success_msg "Running with PID(s) ${pidlist}" + else + log_warning_msg "Not running!" + fi + + return "${STATUS}" +} + +############################### reloadproc() ################################## +# reloadproc sends a HUP signal to the running program (relaod configuration) # +# It optionally, using the -force switch, checks the status of a particular # +# program and starts it if it is not already running. This function accepts # +# one optional switch (must be the first argument), and either two, or zero # +# string arguments. If BIN_FILE and MESSAGE are set in the script's # +# environment, it will use those values, else it requires the bin file as # +# the first argument (following -force if used), and the message as the # +# second. Both must be enclosed in quotes. If the force option is used, it # +# follows the LSB definition of 'force-reload' - the program is started if # +# not already running. # +############################################################################### +reloadproc() +{ + local force="0" + if [ "${#}" -gt "0" -a "${1}" = "-force" ]; then + force="1" + shift 1 + fi + + if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then + BIN_FILE="${1}" + MESSAGE="${2}" + elif [ -z "${BIN_FILE}" -o -z "${MESSAGE}" ]; then + echo "Usage: 'reloadproc BIN_FILE MESSAGE'" + exit 1 # Generic Error + fi + + + +} + +############################## evaluate_retval() ############################### +# evaluate_retval requires that you pass exactly one evaluation parameter of # +# (start, stop, other) based on the previous action that is being evaluated. # +# This function is intended for use with start_daemon and killproc to # +# interpret the LSB exit codes properly, othewise the checks only for success # +# or failure. # +################################################################################ +evaluate_retval() +{ + local error_value="${?}" + + # Handle LSB defined return values + case "${1}" in + + start) + case "${error_value}" in + 0) + log_success_msg "Starting ${MESSAGE} " + return "${error_value}" + ;; + 2) + log_failure_msg "Starting ${MESSAGE} Error: Invalid argument!" + return "${error_value}" + ;; + 5) + log_failure_msg "Starting ${MESSAGE} Error: Not available!" + return "${error_value}" + ;; + *) + log_failure_msg "Starting ${MESSAGE} Error: General failure!" + return "${error_value}" + ;; + esac + ;; + + stop) + case "${error_value}" in + 0) + log_success_msg "Stopping ${MESSAGE} " + return "${error_value}" + ;; + 2) + log_failure_msg "Stopping ${MESSAGE} Error: Invalid argument!" + return "${error_value}" + ;; + 5) + log_failure_msg "Stopping ${MESSAGE} Error: Not available!" + return "${error_value}" + ;; + 7) + log_warning_msg "Stopping ${MESSAGE} Warning: Not running!" + return "${error_value}" + ;; + *) + log_failure_msg "Stopping ${MESSAGE} Error: General failure!" + return "${error_value}" + ;; + esac + ;; + + force-reload) + message="Forcefully reloading " + ;; + + reload) + message="Reloading " + ;; + + restart) + message="Restarting " + ;; + + try-restart) + message="Trying restart " + ;; + + standard) + # $message or $MESSAGE must be set, but not both in order + # to use the 'standard' target. + ;; + esac + + # Print messages for the generic force-reload, reload, restart, + # and try-restart targets + if [ "${error_value}" -eq "0" ] + then + log_success_msg "${message}${MESSAGE} " + return "${error_value}" + else + log_failure_msg "${message}${MESSAGE} " + return "${error_value}" + fi +} + diff --git a/lsb-bootscripts/etc/init.d/localnet b/lsb-bootscripts/etc/init.d/localnet new file mode 100644 index 000000000..322bb8749 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/localnet @@ -0,0 +1,81 @@ +#!/bin/sh +# Begin /etc/init.d/localnet + +### BEGIN INIT INFO +# Provides: localnet +# Required-Start: $local_fs +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Starts the local network. +# Description: Sets the hostname of the machine and starts the +# loopback interface. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + ip addr add 127.0.0.1/8 label lo dev lo + ip link set lo up + if [ "${?}" -eq "0" ] + then + log_success_msg "Bringing up the loopback interface..." + else + log_failure_msg "Bringing up the loopback interface..." + fi + + hostname "${HOSTNAME}" + if [ "${?}" -eq "0" ] + then + log_success_msg "Setting hostname to ${HOSTNAME}..." + else + log_failure_msg "Setting hostname to ${HOSTNAME}..." + fi + + ;; + + stop) + ip link set lo down + if [ "${?}" -eq "0" ] + then + log_success_msg "Bringing down the loopback interface..." + else + log_failure_msg "Bringing down the loopback interface..." + fi + + ;; + + restart) + ip link set lo down + retval="${?}" + sleep 1 + ip addr add 127.0.0.1/8 label lo dev lo + retval=$(( "${retval}" + "${?}" )) + ip link set lo up + retval=$(( "${retval}" + "${?}" )) + hostname "${HOSTNAME}" + retval=$(( "${retval}" + "${?}" )) + if [ "${retval}" -eq "0" ] + then + log_success_msg "Restarting local network..." + else + log_failure_msg "Restarting local network..." + fi + ;; + + status) + log_success_msg "Hostname is: ${INFO}$(hostname)${NORMAL}" + ip link show lo + ;; + + *) + echo "Usage: ${0} {start|stop|restart|status}" + exit 1 + ;; +esac + +# End /etc/init.d/localnet diff --git a/lsb-bootscripts/etc/init.d/modules b/lsb-bootscripts/etc/init.d/modules new file mode 100644 index 000000000..18febfbc0 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/modules @@ -0,0 +1,97 @@ +#!/bin/sh +# Begin /etc/init.d/modules + +### BEGIN INIT INFO +# Provides: modules +# Required-Start: mountvirtfs sysctl +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Loads required modules. +# Description: Loads modules listed in /etc/default/modules. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +# Assure that the kernel has module support. +[ -e /proc/ksyms -o -e /proc/modules ] || exit 0 + +case "${1}" in + start) + + # Exit if there's no modules file or there are no + # valid entries + [ -r /etc/default/modules ] && + egrep -qv '^($|#)' /etc/default/modules || + exit 0 + + # If proc is mounted, find the current kernel + # message level + if [ -f /proc/sys/kernel/printk ]; then + prev_msg=`cat /proc/sys/kernel/printk | \ + sed 'l 1' | sed -n '2~0p' | \ + sed 's/\\\//'` + else + prev_msg="6" + fi + + # Now set the message level to 1 so not to make too + # much noise when loading modules + dmesg -n 1 + + # Only try to load modules if the user has actually given us + # some modules to load. + if egrep -qv '^(#|$)' /etc/default/modules 2>/dev/null + then + + # Read in the configuration file. + exec 9>&0 < /etc/default/modules + + message="${INFO}Loading modules:" + + while read module args + do + # Ignore comments and blank lines. + case "${module}" in + ""|\#*) continue ;; + esac + + # Attempt to load the module, making + # sure to pass any arguments provided. + modprobe ${module} ${args} > /dev/null + + # Print the module name if successful, + # otherwise take note. + if [ ${?} -eq 0 ]; then + message="${message}${NORMAL} ${module}" + else + failedmod="${failedmod} ${module}" + fi + done + + # Print a message about successfully loaded + # modules on the correct line. + log_success_msg "${message}" + + # Print a failure message with a list of any + # modules that may have failed to load. + if [ "${failedmod}" ]; then + log_failure_msg "${FAILURE}Failed to load modules:${failedmod}" + fi + + exec 0>&9 9>&- + + fi + # Set the kernel message level back to it's previous value. + dmesg -n "${prev_msg}" + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End /etc/init.d/modules diff --git a/lsb-bootscripts/etc/init.d/mountfs b/lsb-bootscripts/etc/init.d/mountfs new file mode 100644 index 000000000..562db546a --- /dev/null +++ b/lsb-bootscripts/etc/init.d/mountfs @@ -0,0 +1,59 @@ +#!/bin/sh +# Begin /etc/init.d/mountfs + +### BEGIN INIT INFO +# Provides: $local_fs +# Required-Start: udev checkfs +# Should-Start: +# Required-Stop: swap +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Mounts/unmounts local filesystems defined in /etc/fstab. +# Description: Remounts root filesystem read/write and mounts all +# remaining local filesystems defined in /etc/fstab on +# start. Remounts root filesystem read-only and unmounts +# remaining filesystems on stop. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + message="Remounting root file system in read-write mode..." + mount -n -o remount,rw / >/dev/null + evaluate_retval standard + + # Remove fsck-related file system watermarks. + rm -f /fastboot /forcefsck + + message="Recording existing mounts in /etc/mtab..." + > /etc/mtab + mount -f / || failed=1 + mount -f /proc || failed=1 + mount -f /sys || failed=1 + mount -f /run || failed=1 + (exit ${failed}) + evaluate_retval standard + + # This will mount all filesystems that do not have _netdev in + # their option list. _netdev denotes a network filesystem. + message="Mounting remaining file systems..." + mount -a -O no_netdev >/dev/null + evaluate_retval standard + ;; + + stop) + message="Unmounting all other currently mounted file systems..." + umount -a -d -r >/dev/null + evaluate_retval standard + ;; + + *) + echo "Usage: ${0} {start|stop}" + exit 1 + ;; +esac + +# End /etc/init.d/mountfs diff --git a/lsb-bootscripts/etc/init.d/mountvirtfs b/lsb-bootscripts/etc/init.d/mountvirtfs new file mode 100644 index 000000000..994976934 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/mountvirtfs @@ -0,0 +1,46 @@ +#!/bin/sh +# Begin /etc/init.d/mountvirtfs + +### BEGIN INIT INFO +# Provides: mountvirtfs +# Required-Start: +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Mounts /sys, /proc, and /run virtual (virtel) filesystems. +# Description: Mounts /sys, /proc, and run virtual (virtel) filesystems. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + message="Mounting virtel-based file systems:" + + if ! mountpoint /proc > /dev/null; then + message="${message}${INFO} /proc${NORMAL}" + mount -n /proc || failed=1 + fi + + if ! mountpoint /sys > /dev/null; then + message="${message}${INFO} /sys${NORMAL}" + mount -n /sys || failed=1 + fi + + # create needed directories in /run + mkdir /run/{var,lock,shm} || failed=1 + + (exit ${failed}) + evaluate_retval standard + ;; + + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End /etc/init.d/mountvirtfs diff --git a/lsb-bootscripts/etc/init.d/network b/lsb-bootscripts/etc/init.d/network new file mode 100644 index 000000000..ec11d5e38 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/network @@ -0,0 +1,70 @@ +#!/bin/sh +# Begin /etc/init.d/network + +### BEGIN INIT INFO +# Provides: $network +# Required-Start: $local_fs swap localnet +# Should-Start: $syslog +# Required-Stop: $local_fs swap localnet +# Should-Stop: $syslog +# Default-Start: 3 4 5 +# Default-Stop: 0 1 2 6 +# Short-Description: Starts and configures network interfaces. +# Description: Starts and configures network interfaces. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + # Start all network interfaces + for file in ${NETWORK_DEVICES}/ifconfig.* + do + interface=${file##*/ifconfig.} + + # skip if $file is * (because nothing was found) + if [ "${interface}" = "*" ] + then + continue + fi + IN_BOOT=1 /sbin/ifup ${interface} + done + ;; + + stop) + # Reverse list + FILES="" + for file in /run/network/ifconfig.* + do + FILES="${file} ${FILES}" + done + + # Stop all network interfaces + for file in ${FILES} + do + interface=${file##*/ifconfig.} + + # skip if $file is * (because nothing was found) + if [ "${interface}" = "*" ] + then + continue + fi + + IN_BOOT=1 /sbin/ifdown ${interface} + done + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + *) + echo "Usage: ${0} {start|stop|restart}" + exit 1 + ;; +esac + +# End /etc/init.d/network diff --git a/lsb-bootscripts/etc/init.d/rc b/lsb-bootscripts/etc/init.d/rc new file mode 100644 index 000000000..edad963a5 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/rc @@ -0,0 +1,201 @@ +#!/bin/sh +# Begin $RC_BASE/init.d/rc + +# Get the configuration file +# All changes are to occur in the config file +. /etc/default/rc + +# These 3 signals will not cause our script to exit +trap "" INT QUIT TSTP + +# Simple sanity check - rc only takes one argument +if [ "${#}" -ne 1 ]; then + echo "Usage: ${0} <runlevel>" >&2 + exit 1 +fi + +# Do not use the RUNLEVEL and PREVLEVEL variables provided by init so +# that they can be modified and alternate directories (S) can +# be used without affecting init +runlevel="${1}" +prevlevel="${PREVLEVEL}" + +# Just in case - some flavors of init don't set PREVLEVEL to 'N' +if [ "${prevlevel}" = "" ]; then + prevlevel="N" +fi + +# Mount /run +if [ "${runlevel}" = "S" ]; then + mount -n -t tmpfs tmpfs /run +fi + +# Provide an interactive prompt (if requested) +if [ "${runlevel}" = "S" -a "${iprompt}" = "yes" ]; then + # ash does not accept t and n flags for read + ls -l /bin/sh | grep "/ash" + if [ "${?}" -eq "0" ]; then + # We are using ash + echo -e -n "${WARNING}WARNING: Either bash or zsh is required" + echo -e "${WARNING} for interactive startup.\n" + sleep 3 + else + echo "" + # dcol and icol are spaces before the message to center the + # message on screen. + dcol=$(( $(( ${COLUMNS} - ${dlen} )) / 2 )) + icol=$(( $(( ${COLUMNS} - ${ilen} )) / 2 )) + echo -e "\\033[${dcol}G${welcome_message}" + echo -e "\\033[${icol}G${i_message}${NORMAL}" + echo "" + read -t "${itime}" -n 1 interactive 2>&1 > /dev/null + if [ "${interactive}" = "I" -o "${interactive}" = "i" ]; then + echo -n -e "${CURS_UP}" + echo -e "${INFO}Interactive boot selected...${NORMAL}" + echo "interactive=I" > /run/.interactive-start + fi + fi +fi + + +# Verify that the directory exists +if [ ! -d "${RC_BASE}/rc${runlevel}.d" ]; then + echo -n -e "${WARNING}${RC_BASE}/rc${runlevel}.d does not exist." + echo -e "${NORMAL}" + exit 1 +fi + +# Source the interactive state file if it exists +if [ "${runlevel}" != "S" -a -f /run/.interactive-start ]; then + . /run/.interactive-start +fi + +# Prompt for interactive startup after completing S +if [ "${interactive}" = "I" -a "${runlevel}" != "S" -a \ + "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then + echo -n -e "Proceed with interactive starup of runlevel " + echo -n -e "${INFO}${runlevel}${NORMAL}?" + echo -n -e "(${FAILURE}y${NORMAL})es/(${FAILURE}n${NORMAL})o " + read -n 1 go_on + echo "" + if [ "${go_on}" = "n" ]; then + # don't continue + exit 0 + fi +fi + + +# Attempt to stop all services started in the previous runlevel, +# that are stopped in this runlevel +if [ "${prevlevel}" != "N" ]; then + for link in $(ls -v ${RC_BASE}/rc${runlevel}.d/K* 2> /dev/null) + do + # Check to see if link is a valid symlink + if [ ! -f ${link} ]; then + echo -e "${WARNING}${link} is not a valid symlink." + continue # go on to the next K* link + fi + + # Check to see if link is executable + if [ ! -x ${link} ]; then + echo -e "${WARNING}${link} is not executable, skipping." + continue # go on to the next K* link + fi + + script=${link#$RC_BASE/rc$runlevel.d/K[0-9][0-9]} + prev_start=$RC_BASE/rc$prevlevel.d/S[0-9][0-9]$script + S_start=$RC_BASE/rcS.d/S[0-9][0-9]$script + + if [ "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then + if [ ! -f ${prev_start} ] && [ ! -f ${S_start} ]; then + echo -e -n "${WARNING}WARNING:\n\n${link} can't be" + echo -e "${WARNING} executed because it was not" + echo -e -n "${WARNING} not started in the previous" + echo -e "${WARNING} runlevel (${prevlevel})." + echo -e "${NORMAL}" + continue + fi + fi + ${link} stop + error_value=${?} + + if [ "${error_value}" -ne "0" ]; then + print_error_msg + fi + done +fi + +# Start all functions in this runlevel if they weren't started in +# the previous runlevel +for link in $(ls -v ${RC_BASE}/rc${runlevel}.d/S* 2> /dev/null) +do + if [ "${prevlevel}" != "N" ]; then + script=${link#$RC_BASE/rc$runlevel.d/S[0-9][0-9]} + stop=$RC_BASE/rc$runlevel.d/K[0-9][0-9]$script + prev_start=$RC_BASE/rc$prevlevel.d/S[0-9][0-9]$script + + [ -f ${prev_start} ] && [ ! -f ${stop} ] && continue + fi + + # Check to see if link is a valid symlink + if [ ! -f ${link} ]; then + echo -e "${WARNING}${link} is not a valid symlink." + continue # go on to the next K* link + fi + + # Check to see if link is executable + if [ ! -x ${link} ]; then + echo -e "${WARNING}${link} is not executable, skipping." + continue # go on to the next K* link + fi + + case ${runlevel} in + 0|6) + ${link} stop + ;; + + *) + if [ "${interactive}" = "I" -o "${interactive}" = "i" ]; then + echo -e -n "${WARNING}Start ${INFO}${link} ${WARNING}?" + echo -e -n "${NORMAL}(${FAILURE}y${NORMAL})es/(${FAILURE}n${NORMAL})o " + read -n 1 startit 2>&1 > /dev/null + echo "" + if [ "${startit}" = "y" -o "${startit}" = "Y" ]; then + ${link} start + else + echo -e -n "${WARNING}Not starting ${INFO}${link}" + echo -e "${WARNING}.${NORMAL}\n" + fi + else + ${link} start + fi + ;; + esac + error_value=${?} + + if [ "${error_value}" -gt "1" ]; then + print_error_msg + fi +done + +# Strip apply time to the logs, strip out any color codes and dump +# the log to /var/log/boot.log +if [ -f /run/.bootlog -a "${runlevel}" != "S" ]; then + # Remove any color codes from the temp log file + sed -i 's@\\033\[[0-9];[0-9][0-9]m@@g' /run/.bootlog + #Fix the time and hostname + BTIMESPEC=$(echo `date +"%b %d %T"` `hostname`) + sed -i "s@^bootlog:@${BTIMESPEC} bootlog:@" /run/.bootlog + # Don't try and write in 0 and 6, this is a 'boot' log + if [ "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then + cat /run/.bootlog >> /var/log/boot.log + rm -f /run/.bootlog + fi +fi + +# Remove interactive boot temp file +if [ -f /run/.interactive-start -a "${runlevel}" != "S" ]; then + rm -f /run/.interactive-start +fi + +# End $RC_BASE/init.d/rc diff --git a/lsb-bootscripts/etc/init.d/reboot b/lsb-bootscripts/etc/init.d/reboot new file mode 100644 index 000000000..56e948a3f --- /dev/null +++ b/lsb-bootscripts/etc/init.d/reboot @@ -0,0 +1,32 @@ +#!/bin/sh +# Begin /etc/init.d/reboot + +### BEGIN INIT INFO +# Provides: reboot +# Required-Start: +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: 6 +# Default-Stop: +# Short-Description: Reboots the system. +# Description: Reboots the System. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + stop) + log_success_msg "Restarting system..." + reboot -d -f -i + ;; + + *) + echo "Usage: ${0} {stop}" + exit 1 + ;; + +esac + +# End /etc/init.d/reboot diff --git a/lsb-bootscripts/etc/init.d/sendsignals b/lsb-bootscripts/etc/init.d/sendsignals new file mode 100644 index 000000000..2cd9df84a --- /dev/null +++ b/lsb-bootscripts/etc/init.d/sendsignals @@ -0,0 +1,54 @@ +#!/bin/sh +# Begin /etc/init.d/sendsignals + +### BEGIN INIT INFO +# Provides: sendsignals +# Required-Start: +# Should-Start: +# Required-Stop: $local_fs swap localnet +# Should-Stop: +# Default-Start: +# Default-Stop: 0 6 +# Short-Description: Attempts to kill remaining processes. +# Description: Attempts to kill remaining processes. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + stop) + message="Sending all processes the TERM signal..." + killall5 -15 + error_value=${?} + # Account for successful return value of 2 + if [ ${error_value} -eq 2 ]; then + error_value=0 + fi + sleep 3 + + (exit ${error_value}) + evaluate_retval standard + + message="Sending all processes the KILL signal..." + killall5 -9 + error_value=${?} + # Account for successful return value of 2 + if [ ${error_value} -eq 2 ]; then + error_value=0 + fi + + sleep 3 + + (exit ${error_value}) + evaluate_retval standard + ;; + + *) + echo "Usage: ${0} {stop}" + exit 1 + ;; + +esac + +# End /etc/init.d/sendsignals diff --git a/lsb-bootscripts/etc/init.d/setclock b/lsb-bootscripts/etc/init.d/setclock new file mode 100644 index 000000000..5d47b8dc8 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/setclock @@ -0,0 +1,54 @@ +#!/bin/sh +# Begin /etc/init.d/setclock + +### BEGIN INIT INFO +# Provides: hwclock +# Required-Start: +# Should-Start: modules +# Required-Stop: +# Should-Stop: $syslog +# Default-Start: +# Default-Stop: +# Short-Description: Stores and restores time from the hardware clock +# Description: On boot, system time is obtained from hwclock. The +# hardware clock can also be set on shutdown. +# X-LFS-Provided-By: LFS BLFS +### END INIT INFO + +. /lib/lsb/init-functions + +BIN_FILE="/sbin/hwclock" + +chk_stat + +case "${UTC}" in + yes|true|1) + CLOCKPARAMS="${CLOCKPARAMS} --utc" + ;; + + no|false|0) + CLOCKPARAMS="${CLOCKPARAMS} --localtime" + ;; + +esac + +case ${1} in + start) + message="Setting system clock..." + ${BIN_FILE} --hctosys ${CLOCKPARAMS} >/dev/null + evaluate_retval standard + ;; + + stop) + message="Setting hardware clock..." + ${BIN_FILE} --systohc ${CLOCKPARAMS} >/dev/null + evaluate_retval standard + ;; + + *) + echo "Usage: ${0} {start|stop}" + ;; + +esac + +# End /etc/init.d/setclock diff --git a/lsb-bootscripts/etc/init.d/swap b/lsb-bootscripts/etc/init.d/swap new file mode 100644 index 000000000..31e5591e5 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/swap @@ -0,0 +1,55 @@ +#!/bin/sh +# Begin /etc/init.d/swap + +### BEGIN INIT INFO +# Provides: swap +# Required-Start: udev +# Should-Start: modules +# Required-Stop: localnet +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Mounts and unmounts swap partitions. +# Description: Mounts and unmounts swap partitions defined in +# /etc/fstab. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + message="Activating all swap files/partitions..." + swapon -a + evaluate_retval standard + ;; + + stop) + message="Deactivating all swap files/partitions..." + swapoff -a + evaluate_retval standard + ;; + + restart) + swapoff -a + error_level="${?}" + sleep 1 + swapon -a + error_level="$(( ${error_level} + ${?} ))" + (exit "${error_level}") + evaluate_retval restart + ;; + + status) + log_success_msg "Retrieving swap status..." + echo + swapon -s + ;; + + *) + echo "Usage: ${0} {start|stop|restart|status}" + exit 1 + ;; +esac + +# End /etc/init.d/swap diff --git a/lsb-bootscripts/etc/init.d/sysctl b/lsb-bootscripts/etc/init.d/sysctl new file mode 100644 index 000000000..cccff126e --- /dev/null +++ b/lsb-bootscripts/etc/init.d/sysctl @@ -0,0 +1,39 @@ +#!/bin/sh +# Begin /etc/init.d/sysctl + +### BEGIN INIT INFO +# Provides: sysctl +# Required-Start: mountvirtfs +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Makes changes to the proc filesystem +# Description: Makes changes to the proc filesystem as defined in +# /etc/sysctl.conf. See 'man sysctl(8)'. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + if [ -f "/etc/sysctl.conf" ]; then + message="Setting kernel runtime parameters..." + sysctl -q -p + evaluate_retval standard + fi + ;; + + status) + sysctl -a + ;; + + *) + echo "Usage: ${0} {start|status}" + exit 1 + ;; +esac + +# End /etc/init.d/sysctl diff --git a/lsb-bootscripts/etc/init.d/sysklogd b/lsb-bootscripts/etc/init.d/sysklogd new file mode 100644 index 000000000..dc8829f07 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/sysklogd @@ -0,0 +1,69 @@ +#!/bin/sh +# Begin /etc/init.d/sysklogd + +### BEGIN INIT INFO +# Provides: $syslog +# Required-Start: localnet +# Should-Start: +# Required-Stop: $local_fs sendsignals +# Should-Stop: +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Starts kernel and system log daemons. +# Description: Starts kernel and system log daemons. +# /etc/fstab. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + MESSAGE="system log daemon..." + start_daemon /sbin/syslogd -m 0 + evaluate_retval start + + MESSAGE="kernel log daemon..." + start_daemon /sbin/klogd + evaluate_retval start + ;; + + stop) + MESSAGE="kernel log daemon..." + killproc /sbin/klogd + evaluate_retval stop + + MESSAGE="system log daemon..." + killproc /sbin/syslogd + evaluate_retval stop + ;; + + force-reload) + MESSAGE="system log daemon config file..." + killproc -HUP `/sbin/syslogd` + evaluate_retval reload + ;; + + restart) + MESSAGE="system and kernel log deamons..." + failed=0 + killproc /sbin/klogd || failed=1 + killproc /sbin/syslogd || failed=1 + start_daemon /sbin/syslogd -m 0 || failed=1 + start_daemon /sbin/klogd || failed=1 + (exit ${failed}) + evaluate_retval restart + ;; + + status) + statusproc /sbin/syslogd + statusproc /sbin/klogd + ;; + + *) + echo "Usage: ${0} {start|stop|force-reload|restart|status}" + exit 1 + ;; +esac + +# End /etc/init.d/sysklogd diff --git a/lsb-bootscripts/etc/init.d/template b/lsb-bootscripts/etc/init.d/template new file mode 100644 index 000000000..d10d98c56 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/template @@ -0,0 +1,90 @@ +#!/bin/sh +# Begin /etc/init.d/template + +### BEGIN INIT INFO +# Provides: template +# Required-Start: +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: +# Default-Stop: +# Short-Description: +# Description: +# X-LFS-Provided-By: +### END INIT INFO + +# Source the LSB init-functions, ours are pulled in from there. +. /lib/lsb/init-functions + +# These are optional, but required for chk_stat. They will be used in +# the rest of the functions if defined, else you must provide a program +# name to control, and a message ('Starting Template Service...' +# or 'Stoping Template Service...') to evauate_retval. See the +# documentaion in the lfs-fucntions file for more information. +MESSAGE="Template Service" +BIN_FILE="/some/path/to/template" +CONFIGFILE="/etc/default/template.conf" + +# check that $BIN_FILE exists and is executable, and $CONFIGFILE exists. +chk_stat + +# LSB Defined functions require that at least $BIN_FILE be passed to them, +# where as lfs-functions will use the $BIN_FILE environment variable. +# loadproc() and endproc() are just wrappers that pass everything on to +# the LSB defined functions. + +case "${1}" in + start) + #start_daemon "${BIN_FILE}" -arg1 -arg2 #... or: + loadproc -arg1 -arg2 -arg3 #... + evaluate_retval start + ;; + + stop) + #killproc -TERM "${BIN_FILE}" or: + endproc + evaluate_retval stop + ;; + + force-reload) + reloadproc -force + evaluate_retval force-reload + ;; + + restart) + $0 stop + $0 start + ;; + + status) + statusproc + ;; + +# reload and try-restart are optional per LSB requirements + reload) + reloadproc + evaluate_retval reload + ;; + + try-restart) + # Since this is optional there is no lfs-function for this one... + # might be at a later time if used enough, but I doubt it usefullness. + pidofproc "${BIN_FILE}" > /dev/null + if [ "${?}" -ne "0" ]; then + MESSAGE="${MESSAGE}: Not Running" + else + $0 stop + $0 start + exit 0 + fi + evaluate_retval try-restart + ;; + + *) + echo "Usage: ${0} {start|stop|{force-}reload|{try-}restart|status}" + exit 1 + ;; +esac + +# End /etc/init.d/template diff --git a/lsb-bootscripts/etc/init.d/udev b/lsb-bootscripts/etc/init.d/udev new file mode 100644 index 000000000..fd17b5e94 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/udev @@ -0,0 +1,89 @@ +#!/bin/sh +# Begin $rc_base/init.d/udev + +### BEGIN INIT INFO +# Provides: udev +# Required-Start: +# Should-Start: modules +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Populated /dev with device nodes. +# Description: Mounts a tempfs on /dev and starts the udevd daemon. +# Device nodes are created as defined by udev. +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +MESSAGE="Populating /dev with device nodes..." + +case "${1}" in + start) + if ! grep -q '[[:space:]]sysfs' /proc/mounts; then + echo_failure + boot_mesg -n "FAILURE:\n\nUnable to create" ${FAILURE} + boot_mesg -n " devices without a SysFS filesystem" + boot_mesg -n "\n\nAfter you press Enter, this system" + boot_mesg -n " will be halted and powered off." + boot_mesg -n "\n\nPress Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + $FAILURE_ACTION + /etc/rc.d/init.d/halt stop + fi + + # If not using DEVTMPFS mount a temporary file system over + # /dev, so that any devices made or removed during this boot + # don't affect the next one. The reason we don't write to mtab + # is because we don't ever want /dev to be unavailable (such as + # by `umount -a'). + if ! mountpoint /dev > /dev/null; then + mount -n -t tmpfs tmpfs /dev -o mode=755 + fi + if [ ${?} -ne 0 ]; then + echo_failure + boot_mesg -n "FAILURE:\n\nCannot mount a tmpfs" ${FAILURE} + boot_mesg -n " onto /dev, this system will be halted." + boot_mesg -n "\n\nAfter you press Enter, this system" + boot_mesg -n " will be halted and powered off." + boot_mesg -n "\n\nPress Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + $FAILURE_ACTION + /etc/rc.d/init.d/halt stop + fi + + # Create a symlink for POSIX shared memory + ln -s /run/shm /dev/shm + + # Udev handles uevents itself, so we don't need to have + # the kernel call out to any binary in response to them + # This is a failsafe and should be done in kernel config + echo > /proc/sys/kernel/hotplug + + # Copy the only static device node that Udev >= 155 doesn't + # handle to /dev (handled by default with DEVTMPFS) + if [ ! -f /dev/null ]; then + cp -a /lib/udev/devices/null /dev + fi + + # Start the udev daemon to continually watch for, and act on, + # uevents + /sbin/udevd --daemon + + # Now traverse /sys in order to "coldplug" devices that have + # already been discovered + /sbin/udevadm trigger --action=add + + # Now wait for udevd to process the uevents we triggered + /sbin/udevadm settle + evaluate_retval standard + ;; + + *) + echo "Usage ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/udev diff --git a/lsb-bootscripts/etc/init.d/udev_retry b/lsb-bootscripts/etc/init.d/udev_retry new file mode 100644 index 000000000..24b956ae0 --- /dev/null +++ b/lsb-bootscripts/etc/init.d/udev_retry @@ -0,0 +1,49 @@ +#!/bin/sh +# Begin $rc_base/init.d/udev_retry + +### BEGIN INIT INFO +# Provides: udev_retry +# Required-Start: udev +# Should-Start: $local_fs +# Required-Stop: +# Should-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Replays failed uevents and creates additonal devices. +# Description: Replays any failed uevents that were skipped due to +# slow hardware initialization, and creates those needed +# device nodes +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +MESSAGE="Retrying failed uevents, if any..." + +case "${1}" in + start) + + # From Debian: "copy the rules generated before / was mounted + # read-write": + for file in /dev/.udev/tmp-rules--*; do + dest=${file##*tmp-rules--} + [ "$dest" = '*' ] && break + cat $file >> /etc/udev/rules.d/$dest + rm -f $file + done + + # Re-trigger the failed uevents in hope they will succeed now + /sbin/udevadm trigger --type=failed --action=add + + # Now wait for udevd to process the uevents we triggered + /sbin/udevadm settle + evaluate_retval standard + ;; + + *) + echo "Usage ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/udev_retry diff --git a/lsb-bootscripts/etc/inittab b/lsb-bootscripts/etc/inittab new file mode 100644 index 000000000..c718c0584 --- /dev/null +++ b/lsb-bootscripts/etc/inittab @@ -0,0 +1,26 @@ +# Begin /etc/inittab + +id:3:initdefault: + +si::sysinit:/etc/init.d/rc S + +l0:0:wait:/etc/init.d/rc 0 +l1:S1:wait:/etc/init.d/rc 1 +l2:2:wait:/etc/init.d/rc 2 +l3:3:wait:/etc/init.d/rc 3 +l4:4:wait:/etc/init.d/rc 4 +l5:5:wait:/etc/init.d/rc 5 +l6:6:wait:/etc/init.d/rc 6 + +ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now + +su:S016:once:/sbin/sulogin + +1:2345:respawn:/sbin/agetty tty1 9600 +2:2345:respawn:/sbin/agetty tty2 9600 +3:2345:respawn:/sbin/agetty tty3 9600 +4:2345:respawn:/sbin/agetty tty4 9600 +5:2345:respawn:/sbin/agetty tty5 9600 +6:2345:respawn:/sbin/agetty tty6 9600 + +# End /etc/inittab diff --git a/lsb-bootscripts/lib/lsb/init-functions b/lsb-bootscripts/lib/lsb/init-functions new file mode 100644 index 000000000..338f3e00b --- /dev/null +++ b/lsb-bootscripts/lib/lsb/init-functions @@ -0,0 +1,583 @@ +# Begin /lib/lsb/init-funtions + +# Provides initialization funtions as defined by the Linux Standard Base +# specification, version 3.1.0 + +# Source rc configuration if not inherited from the environment +if [ "${RC_BASE}" = "" ]; then + . /etc/default/rc +fi + +# Source the distro functions file +if [ "${DISTRO_MINI}" != "" ]; then + . "${RC_BASE}/init.d/${DISTRO_MINI}-functions" +fi + +################################################################################ +# start_daemon() # +# Usage: start_daemon [-f] [-n nicelevel] [-p pidfile] pathname [args...] # +# # +# Purpose: This runs the specified program as a daemon # +# # +# Inputs: -f: (force) run the program even if it is already running. # +# -n nicelevel: specify a nice level. See 'man nice(1)'. # +# -p pidfile: use the specified file to determine PIDs. # +# pathname: the complete path to the specified program # +# args: additional arguments passed to the program (pathname) # +# # +# Return values (as defined by LSB exit codes): # +# 0 - program is running or service is OK # +# 1 - generic or unspecified error # +# 2 - invalid or excessive argument(s) # +# 5 - program is not installed # +################################################################################ +start_daemon() +{ + local force="" + local nice="0" + local pidfile="" + local pidlist="" + local retval="" + + # Process arguments + while true + do + case "${1}" in + + -f) + force="1" + shift 1 + ;; + + -n) + nice="${2}" + shift 2 + ;; + + -p) + pidfile="${2}" + shift 2 + ;; + + -*) + return 2 + ;; + + *) + program="${1}" + break + ;; + esac + done + + # Check for a valid program + if [ ! -e "${program}" ] + then + return 5 + fi + + # Execute + if [ -z "${force}" ] + then + if [ -z "${pidfile}" ] + then + # determine the pid by discovery + pidlist=`pidofproc "${1}"` + retval="${?}" + else + # The PID file contains the needed PIDs + # Note that by LSB requirement, the path must be given to pidofproc, + # however, it is not used by the current implementation or standard. + pidlist=`pidofproc -p "${pidfile}" "${1}"` + retval="${?}" + fi + + # return a value ONLY + # It is the init script's (or distribution's functions) responsibilty + # to log messages! + case "${retval}" in + + 0) + # program is already running correctly, this is a + # succesful start. + return 0 + ;; + + 1) + # program is not running, but an invalid pid file exists + # remove the pid file and continue + rm -f "${pidfile}" + ;; + + 3) + # program is not running and no pidfile exists + # do nothing here, let start_deamon continue. + ;; + + *) + # Others as returned by status values shall not be interpreted + # and returned as an unspecified error. + return 1 + ;; + esac + fi + + # do the start! + nice -n "${nice}" "${@}" + +} + +################################################################################ +# killproc() # +# Usage: killproc [-p pidfile] pathname [signal] # +# # +# Purpose: Send control signals to running processes # +# # +# Inputs: -p pidfile, uses the specified pidfile # +# pathname, pathname to the specified program # +# signal, send this signal to pathname # +# # +# Return values (as defined by LSB exit codes): # +# 0 - program (pathname) has stopped/is already stopped or a # +# running program has been sent specified signal and stopped # +# successfully # +# 1 - generic or unspecified error # +# 2 - invalid or excessive argument(s) # +# 5 - program is not installed # +# 7 - program is not running and a signal was supplied # +################################################################################ +killproc() +{ + local pidfile + local program + local prefix + local progname + local signal="-TERM" + local fallback="-KILL" + local nosig + local pidlist + local retval + local pid + local delay="30" + local piddead + local dtime + + # Process arguments + while true + do + case "${1}" in + + -p) + pidfile="${2}" + shift 2 + ;; + + *) + program="${1}" + if [ -n "${2}" ] + then + signal="${2}" + fallback="" + else + nosig=1 + fi + + # error on additional arguments + if [ -n "${3}" ] + then + return 2 + else + break + fi + ;; + esac + done + + # Check for a valid program + if [ ! -e "${program}" ] + then + return 5 + fi + + # Check for a valid signal + check_signal "${signal}" + if [ "${?}" -ne "0" ] + then + return 2 + fi + + # Get a list of pids + if [ -z "${pidfile}" ] + then + # determine the pid by discovery + pidlist=`pidofproc "${1}"` + retval="${?}" + else + # The PID file contains the needed PIDs + # Note that by LSB requirement, the path must be given to pidofproc, + # however, it is not used by the current implementation or standard. + pidlist=`pidofproc -p "${pidfile}" "${1}"` + retval="${?}" + fi + + # return a value ONLY + # It is the init script's (or distribution's functions) responsibilty + # to log messages! + case "${retval}" in + + 0) + # program is running correctly + # do nothing here, let killproc continue. + ;; + + 1) + # program is not running, but an invalid pid file exists + # remove the pid file. + rm -f "${pidfile}" + # this is only a success if no signal was passed. + if [ -n "${nosig}" ] + then + return 0 + else + return 7 + fi + ;; + + 3) + # program is not running and no pidfile exists + # this is only a success if no signal was passed. + if [ -n "${nosig}" ] + then + return 0 + else + return 7 + fi + ;; + + *) + # Others as returned by status values shall not be interpreted + # and returned as an unspecified error. + return 1 + ;; + esac + + # perform different actions for exit signals and control signals + check_sig_type "${signal}" + if [ "${?}" -eq "0" ] # signal is used to terminate the program + then + # account for empty pidlist (pid file still exists and nosignal was given) + if [ "${pidlist}" != "" ]; then + #kill the list of pids + for pid in ${pidlist} + do + kill -0 "${pid}" 2> /dev/null + if [ "${?}" -ne "0" ]; then + # process is dead, continue to next and assume all is well + continue + else + kill "${signal}" "${pid}" 2> /dev/null + # Wait up to ${delay}/10 seconds to for "${pid}" to + # terminate in 10ths of a second + while [ "${delay}" -ne "0" ] + do + kill -0 "${pid}" 2> /dev/null || piddead="1" + if [ "${piddead}" = "1" ] + then + break + fi + sleep 0.1 + delay="$(( ${delay} - 1 ))" + done + # If a fallback is set, and program is still running, then + # use the fallback + if [ -n "${fallback}" -a "${piddead}" != "1" ] + then + kill "${fallback}" "${pid}" 2> /dev/null + sleep 1 + # Check again, and fail if still running + kill -0 "${pid}" 2> /dev/null && return 1 + else + # just check one last time and if still alive, fail + sleep 1 + kill -0 "${pid}" 2> /dev/null && return 1 + fi + fi + done + fi + + # Check for and remove stale PID files. + if [ -z "${pidfile}" ] + then + #find the basename of $program + prefix=`echo "${program}" | sed 's/[^/]*$//'` + progname=`echo "${program}" | sed "s@${prefix}@@"` + if [ -e "/var/run/${progname}.pid" ] + then + rm -f "/var/run/${progname}.pid" 2> /dev/null + fi + else + if [ -e "${pidfile}" ] + then + rm -f "${pidfile}" 2> /dev/null + fi + fi + + # For signals that do not expect a program to exit, simply + # let kill do it's job, and evaluate kills return for value + else # check_sig_type - signal is not used to terminate program + for pid in ${pidlist} + do + kill "${signal}" "${pid}" + if [ "${?}" -ne "0" ]; then + return 1 + fi + done + fi +} + +################################################################################ +# pidofproc() # +# Usage: pidofproc [-p pidfile] pathname # +# # +# Purpose: This function returns one or more pid(s) for a particular daemon # +# # +# Inputs: -p pidfile, use the specified pidfile instead of pidof # +# pathname, path to the specified program # +# # +# Return values (as defined by LSB status codes): # +# 0 - Success (PIDs to stdout) # +# 1 - Program is dead, PID file still exists (remaining PIDs output) # +# 3 - Program is not running (no output) # +################################################################################ +pidofproc() +{ + +local pidfile +local program +local prefix +local progname +local pidlist +local lpids +local exitstatus="0" + + # Process arguments + while true + do + case "${1}" in + + -p) + pidfile="${2}" + shift 2 + ;; + + *) + program="${1}" + if [ -n "${2}" ] + then + # Too many arguments + # Since this is status, return unknown + return 4 + else + break + fi + ;; + esac + done + + # If a PID file is not specified, try and find one. + if [ -z "${pidfile}" ] + then + # get the program's basename + prefix=`echo "${program}" | sed 's/[^/]*$//'` + progname=`echo "${program}" | sed "s@${prefix}@@"` + # if a PID file exists with that name, assume that is it. + if [ -e "/var/run/${progname}.pid" ] + then + pidfile="/var/run/${progname}.pid" + fi + fi + + # if a PID file is set and exists, use it. + if [ -n "${pidfile}" -a -e "${pidfile}" ] + then + # use the value in the first line of the pidfile + pidlist=`/bin/head -n1 "${pidfile}"` + # This can optionally be written as 'sed 1q' to repalce 'head -n1' + # should LFS move /bin/head to /usr/bin/head + else + # use pidof + pidlist=`pidof "${program}"` + fi + + # Figure out if all listed PIDs are running. + for pid in ${pidlist} + do + kill -0 ${pid} 2> /dev/null + if [ "${?}" -eq "0" ]; then + lpids="${pids}${pid} " + else + exitstatus="1" + fi + done + + if [ -z "${lpids}" -a ! -f "${pidfile}" ]; then + return 3 + else + echo "${lpids}" + return "${exitstatus}" + fi +} +################################################################################ +# log_success_msg() # +# Usage: log_success_msg [$MESSAGE | "message"] # +# # +# Purpose: Print a successful status message to the screen and optionally # +# a boot log file. # +# # +# Inputs: accepts one string value, either a quoted string or optionally # +# the value of $MESSAGE if set in the running environment. # +# # +# Return values: Not used # +################################################################################ +log_success_msg() +{ + echo -n -e "${PREFIX_SUCCESS}${@}" + echo -e "${SET_COL}${BRACKET}[${SUCCESS} OK ${BRACKET}]${NORMAL}" + if [ "${BOOTLOG_ENAB}" = "yes" ]; then + if [ $( hostname ) = "(none)" ]; then + BTTIMESPEC="" + else + BTTIMESPEC="$(echo `date -u +"%b %d %T"` `hostname`) " + fi + if [ "${RUNLEVEL}" != "0" -a "${RUNLEVEL}" != "6" ]; then + echo "${BTTIMESPEC}bootlog: ${@} Successful" >> /run/.bootlog + fi + fi + return 0 +} + +################################################################################ +# log_failure_msg() # +# Usage: log_failure_msg [$MESSAGE | "message"] # +# # +# Purpose: Print a failure status message to the screen and optionally # +# a boot log file. # +# # +# Inputs: accepts one string value, either a quoted string or optionally # +# the value of $MESSAGE if set in the running environment. # +# # +# Return values: Not used # +################################################################################ +log_failure_msg() +{ + echo -n -e "${PREFIX_FAILURE}${@}" + echo -e "${SET_COL}${BRACKET}[${FAILURE} FAIL ${BRACKET}]${NORMAL}" + if [ "${BOOTLOG_ENAB}" = "yes" ]; then + if [ $( hostname ) = "(none)" ]; then + BTTIMESPEC="" + else + BTTIMESPEC="$(echo `date -u +"%b %d %T"` `hostname`) " + fi + if [ "${RUNLEVEL}" != "0" -a "${RUNLEVEL}" != "6" ]; then + echo "${BTTIMESPEC}bootlog: ${@} Failed!" >> /run/.bootlog + fi + fi + return 0 +} + +################################################################################ +# log_warning_msg() # +# Usage: log_warning_msg [$MESSAGE | "message"] # +# # +# Purpose: Print a warning status message to the screen and optionally # +# a boot log file. # +# # +# Inputs: accepts one string value, either a quoted string or optionally # +# the value of $MESSAGE if set in the running environment. # +# # +# Return values: Not used # +################################################################################ +log_warning_msg() +{ + echo -n -e "${PREFIX_WARNING}${@}" + echo -e "${SET_COL}${BRACKET}[${WARNING} WARN ${BRACKET}]${NORMAL}" + if [ "${BOOTLOG_ENAB}" = "yes" ]; then + if [ $( hostname ) = "(none)" ]; then + BTTIMESPEC="" + else + BTTIMESPEC="$(echo `date -u +"%b %d %T"` `hostname`) " + fi + if [ "${RUNLEVEL}" != "0" -a "${RUNLEVEL}" != "6" ]; then + echo "${BTTIMESPEC}bootlog: ${@} Warning" >> /run/.bootlog + fi + fi + return 0 +} + +################################################################################ +# check_signal() # +# Usage: check_signal [ -{signal} | {signal} ] # +# # +# Purpose: Check for a valid signal. This is not defined by any LSB draft, # +# however, it is required to check the signals to determine if the # +# signals chosen are invalid arguments to the other functions. # +# # +# Inputs: accepts a single string value in the form or -{signal} or {signal} # +# # +# Return values: # +# 0 - Success (signal is valid # +# 1 - Signal is not valid # +################################################################################ +check_signal() +{ + local valsig + + # Add error handling for invalid signals + valsig="-ALRM -HUP -INT -KILL -PIPE -POLL -PROF -TERM -USR1 -USR2" + valsig="${valsig} -VTALRM -STKFLT -PWR -WINCH -CHLD -URG -TSTP -TTIN" + valsig="${valsig} -TTOU -STOP -CONT -ABRT -FPE -ILL -QUIT -SEGV -TRAP" + valsig="${valsig} -SYS -EMT -BUS -XCPU -XFSZ -0 -1 -2 -3 -4 -5 -6 -8 -9" + valsig="${valsig} -11 -13 -14 -15" + + echo "${valsig}" | grep -- " ${1} " > /dev/null + if [ "${?}" -eq "0" ] + then + return 0 + else + return 1 + fi +} + + +################################################################################ +# check_sig_type() # +# Usage: check_signal [ -{signal} | {signal} ] # +# # +# Purpose: Check if signal is a program termination signal or a control signal # +# This is not defined by any LSB draft, however, it is required to # +# check the signals to determine if they are intended to end a # +# program or simply to control it. # +# # +# Inputs: accepts a single string value in the form or -{signal} or {signal} # +# # +# Return values: # +# 0 - Signal is used for program termination # +# 1 - Signal is used for program control # +################################################################################ +check_sig_type() +{ + local valsig + + # The list of termination signals (limited to generally used items) + valsig="-ALRM -INT -KILL -TERM -PWR -STOP -ABRT -QUIT -2 -3 -6 -9 -14 -15" + + echo "${valsig}" | grep -- " ${1} " > /dev/null + if [ "${?}" -eq "0" ] + then + return 0 + else + return 1 + fi +} + +# End /lib/lsb/init-functions diff --git a/lsb-bootscripts/lib/network-services/ipv4-static b/lsb-bootscripts/lib/network-services/ipv4-static new file mode 100644 index 000000000..417d22de6 --- /dev/null +++ b/lsb-bootscripts/lib/network-services/ipv4-static @@ -0,0 +1,80 @@ +#!/bin/sh +######################################################################## +# Begin $NETWORK_DEVICES/services/ipv4-static +# +# Description : IPV4 Static Boot Script +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /lib/lsb/init-functions +. ${IFCONFIG} + +if [ -z "${IP}" ]; then + log_failure_msg "IP variable missing from ${IFCONFIG}, cannot continue." + exit 1 +fi + +if [ -z "${PREFIX}" -a -z "${PEER}" ]; then + log_warning_msg "PREFIX variable missing from ${IFCONFIG}, assuming 24." + PREFIX=24 + args="${args} ${IP}/${PREFIX}" +elif [ -n "${PREFIX}" -a -n "${PEER}" ]; then + log_failure_msg "PREFIX and PEER both specified in ${IFCONFIG}, cannot continue." + exit 1 +elif [ -n "${PREFIX}" ]; then + args="${args} ${IP}/${PREFIX}" +elif [ -n "${PEER}" ]; then + args="${args} ${IP} peer ${PEER}" +fi + +if [ -n "${BROADCAST}" ]; then + args="${args} broadcast ${BROADCAST}" +fi + +if [ -n "${SOURCE}" ]; then + args="${args} src ${SOURCE}" +fi + +case "${2}" in + up) + MESSAGE="Adding IPv4 address ${IP} to the ${1} interface..." + ip addr add ${args} dev ${1} + evaluate_retval + + if [ -n "${GATEWAY}" ]; then + if ip route | grep -q default; then + log_warning_msg "Gateway already setup; skipping." ${WARNING} + else + MESSAGE="Setting up default gateway..." + ip route add default via ${GATEWAY} dev ${1} + evaluate_retval + fi + fi + ;; + + down) + if [ -n "${GATEWAY}" ]; then + MESSAGE="Removing default gateway..." + ip route del default + evaluate_retval + fi + + MESSAGE="Removing IPv4 address ${IP} from the ${1} interface..." + ip addr del ${args} dev ${1} + evaluate_retval + ;; + + *) + echo "Usage: ${0} [interface] {up|down}" + exit 1 + ;; +esac + +# End $NETWORK_DEVICES/services/ipv4-static diff --git a/lsb-bootscripts/lib/network-services/ipv4-static-route b/lsb-bootscripts/lib/network-services/ipv4-static-route new file mode 100644 index 000000000..4205a022d --- /dev/null +++ b/lsb-bootscripts/lib/network-services/ipv4-static-route @@ -0,0 +1,92 @@ +#!/bin/sh +######################################################################## +# Begin $NETWORK_DEVICES/services/ipv4-static-route +# +# Description : IPV4 Static Route Script +# +# Authors : Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /lib/lsb/init-functions +. ${IFCONFIG} + +case "${TYPE}" in + ("" | "network") + need_ip=1 + need_gateway=1 + ;; + + ("default") + need_gateway=1 + args="${args} default" + desc="default" + ;; + + ("host") + need_ip=1 + ;; + + ("unreachable") + need_ip=1 + args="${args} unreachable" + desc="unreachable " + ;; + + (*) + boot_mesg "Unknown route type (${TYPE}) in ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + ;; +esac + +if [ -n "${need_ip}" ]; then + if [ -z "${IP}" ]; then + boot_mesg "IP variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + + if [ -z "${PREFIX}" ]; then + boot_mesg "PREFIX variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + + args="${args} ${IP}/${PREFIX}" + desc="${desc}${IP}/${PREFIX}" +fi + +if [ -n "${need_gateway}" ]; then + if [ -z "${GATEWAY}" ]; then + boot_mesg "GATEWAY variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + args="${args} via ${GATEWAY}" +fi + +case "${2}" in + up) + boot_mesg "Adding '${desc}' route to the ${1} interface..." + ip route add ${args} dev ${1} + evaluate_retval + ;; + + down) + boot_mesg "Removing '${desc}' route from the ${1} interface..." + ip route del ${args} dev ${1} + evaluate_retval + ;; + + *) + echo "Usage: ${0} [interface] {up|down}" + exit 1 + ;; +esac + +# End $NETWORK_DEVICES/services/ipv4-static-route diff --git a/lsb-bootscripts/sbin/ifdown b/lsb-bootscripts/sbin/ifdown new file mode 100644 index 000000000..f9e2a51ad --- /dev/null +++ b/lsb-bootscripts/sbin/ifdown @@ -0,0 +1,98 @@ +#!/bin/sh +######################################################################## +# Begin $NETWORK_DEVICES/ifdown +# +# Description : Interface Down +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.01 +# +# Notes : the IFCONFIG variable is passed to the scripts found +# in the services directory, to indicate what file the +# service should source to get environmental variables. +# +######################################################################## + +. /lib/lsb/init-functions + +# Collect a list of configuration files for our interface +if [ -n "${2}" ]; then + for file in ${@#$1}; do # All parameters except $1 + FILES="${FILES} /run/network/ifconfig.${1}/${file}" + done +elif [ -d "/run/network/ifconfig.${1}" ]; then + FILES=`echo /run/network/ifconfig.${1}/*` +else + FILES="/run/network/ifconfig.${1}" +fi + +# Reverse the order configuration files are processed in +for file in ${FILES}; do + FILES2="${file} ${FILES2}" +done +FILES=${FILES2} + +# Process each configuration file +for file in ${FILES}; do + # skip backup files + if [ "${file}" != "${file%""~""}" ]; then + continue + fi + + if [ ! -f "${file}" ]; then + message="${file} is not a network configuration file or directory." + log_warning_msg + fi + ( + if [ ! -d "${file}" ]; then + . ${file} + fi + + # Will not process this service if started by boot, and ONBOOT + # is not set to yes + if [ "${IN_BOOT}" = "1" -a "${ONBOOT}" != "yes" ]; then + continue + fi + + # Will not process this service if started by hotplug, and + # ONHOTPLUG is not set to yes + if [ "${IN_HOTPLUG}" = "1" -a "${ONHOTPLUG}" != "yes" ]; then + continue + fi + + # This will run the service script, if SERVICE is set + if [ -n "${SERVICE}" -a -x "/lib/network-services/${SERVICE}" ]; then + if ip link show ${1} > /dev/null 2>&1 + then + IFCONFIG=${file} /lib/network-services/${SERVICE} ${1} down && + if [ -f "${file}" ]; then + rm ${file} + fi + else + message="Interface ${1} doesn't exist." + log_warning_msg + fi + else + echo -e "${FAILURE}Unable to process ${file}. Either" + echo -e "${FAILURE}the SERVICE variable was not set," + echo -e "${FAILURE}or the specified service cannot be executed." + message="" + log_failure_msg + fi + ) +done + +if [ -z "${2}" ]; then + link_status=`ip link show $1` + if [ -n "${link_status}" ]; then + if echo "${link_status}" | grep -q UP; then + message="Bringing down the ${1} interface..." + ip link set ${1} down + evaluate_retval standard + fi + fi +fi + +# End $NETWORK_DEVICES/ifdown diff --git a/lsb-bootscripts/sbin/ifup b/lsb-bootscripts/sbin/ifup new file mode 100644 index 000000000..069af2f94 --- /dev/null +++ b/lsb-bootscripts/sbin/ifup @@ -0,0 +1,97 @@ +#!/bin/sh +######################################################################## +# Begin $NETWORK_DEVICES/ifup +# +# Description : Interface Up +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : the IFCONFIG variable is passed to the scripts found +# in the services directory, to indicate what file the +# service should source to get environmental variables. +# +######################################################################## + +. /lib/lsb/init-functions + +# Collect a list of configuration files for our interface +if [ -n "${2}" ]; then + for file in ${@#$1} # All parameters except $1 + do + FILES="${FILES} ${NETWORK_DEVICES}/ifconfig.${1}/${file}" + done +elif [ -d "${NETWORK_DEVICES}/ifconfig.${1}" ]; then + FILES=`echo ${NETWORK_DEVICES}/ifconfig.${1}/*` +else + FILES="${NETWORK_DEVICES}/ifconfig.${1}" +fi + +message="Bringing up the ${1} interface..." + +# Process each configruation file +for file in ${FILES}; do + # skip backup files + if [ "${file}" != "${file%""~""}" ]; then + continue + fi + + if [ ! -f "${file}" ]; then + log_warning_msg + message="${file} is not a network configuration file or directory." + log_warning_msg + fi + + ( + if [ ! -d "${file}" ]; then + . ${file} + fi + + # Will not process this service if started by boot, and ONBOOT + # is not set to yes + if [ "${IN_BOOT}" = "1" -a "${ONBOOT}" != "yes" ]; then + continue + fi + # Will not process this service if started by hotplug, and + # ONHOTPLUG is not set to yes + if [ "${IN_HOTPLUG}" = "1" -a "${ONHOTPLUG}" != "yes" -a "${HOSTNAME}" != "(none)" ]; then + continue + fi + + if [ -n "${SERVICE}" -a -x "/lib/network-services/${SERVICE}" ]; then + if [ -z "${CHECK_LINK}" -o "${CHECK_LINK}" = "y" -o "${CHECK_LINK}" = "yes" -o "${CHECK_LINK}" = "1" ]; then + if ip link show ${1} > /dev/null 2>&1; then + link_status=`ip link show ${1}` + if [ -n "${link_status}" ]; then + if ! echo "${link_status}" | grep -q UP; then + ip link set ${1} up + evaluate_retval standard + fi + fi + else + message="${message}Interface ${1} doesn't exist." + log_warning_msg + fi + fi + IFCONFIG=${file} /lib/network-services/${SERVICE} ${1} up + if [ "${?}" -eq "0" ]; then + if [ ! -d "${file}" -a "${file}" != "${NETWORK_DEVICES}/ifconfig.${1}" ]; then + mkdir -p "/run/network/ifconfig.${1}" + cp "${file}" "/run/network/ifconfig.${1}" + elif [ ! -d "${file}" ]; then + cp "${file}" "/run/network/" + fi + fi + else + echo -e "${FAILURE}Unable to process ${file}. Either" + echo -e "${FAILURE}the SERVICE variable was not set," + echo -e "${FAILURE}or the specified service cannot be executed." + message="" + log_failure_msg + fi + ) +done + +# End $NETWORK_DEVICES/ifup |