From d7ea6f24b8cc5ac061f2d52a758721523dd5410a Mon Sep 17 00:00:00 2001
From: Manuel Canales Esparcia <manuel@linuxfromscratch.org>
Date: Sun, 30 Jan 2005 10:24:49 +0000
Subject: Removed obsolete commented text, chapter02.

git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@4594 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689
---
 chapter02/creatingfilesystem.xml | 25 ------------------------
 chapter02/creatingpartition.xml  | 36 ----------------------------------
 chapter02/introduction.xml       |  6 ------
 chapter02/mounting.xml           | 42 ----------------------------------------
 4 files changed, 109 deletions(-)

diff --git a/chapter02/creatingfilesystem.xml b/chapter02/creatingfilesystem.xml
index 5b0bd32c0..8ab47b575 100644
--- a/chapter02/creatingfilesystem.xml
+++ b/chapter02/creatingfilesystem.xml
@@ -9,29 +9,4 @@
 
 <para>See testing</para>
 
-<!--
-<para>Now that we have a blank partition, we can create a file system on it.
-Most widely used in the Linux world is the second extended file system (ext2),
-but with the high-capacity hard disks of today the so-called journaling file
-systems are becoming increasingly popular. Here we will create an ext2 file
-system, but build instructions for other file systems can be found at 
-<ulink url="&blfs-root;view/stable/postlfs/filesystems.html"/>.</para>
-
-<para>To create an ext2 file system on the LFS partition run the following:</para>
-
-<screen><userinput>mke2fs /dev/<replaceable>[xxx]</replaceable></userinput></screen>
-
-<para>Replace <replaceable>[xxx]</replaceable> with the name of the LFS partition
-(something like <filename>hda5</filename>).</para>
-
-<para>If you created a (new) swap partition you need to initialize it as a
-swap partition too (also known as formatting, like you did above with
-<command>mke2fs</command>) by running:</para>
-
-<screen><userinput>mkswap /dev/<replaceable>[yyy]</replaceable></userinput></screen>
-
-<para>Replace <replaceable>[yyy]</replaceable> with the name of the swap
-partition.</para>
--->
-
 </sect1>
diff --git a/chapter02/creatingpartition.xml b/chapter02/creatingpartition.xml
index dfb1ea387..7e14f9d15 100644
--- a/chapter02/creatingpartition.xml
+++ b/chapter02/creatingpartition.xml
@@ -9,40 +9,4 @@
 
 <para>See testing</para>
 
-<!--
-<para>In order to build our new Linux system, we will need some space:
-an empty disk partition. If you don't have a free partition, and no room
-on any of your hard disks to make one, then you could build LFS on the
-same partition as the one on which your current distribution is installed.
-This procedure is not recommended for your first LFS install, but if you
-are short on disk space, and you feel brave, take a look at the hint at
-<ulink url="&hints-root;lfs_next_to_existing_systems.txt"/>.</para>
-
-<para>For a minimal system you will need a partition of around 1.3 GB.
-This is enough to store all the source tarballs and compile all the packages.
-But if you intend to use the LFS system as your primary Linux system, you
-will probably want to install additional software, and will need more space
-than this, probably around 2 or 3 GB.</para>
-
-<para>As we almost never have enough RAM in our box, it is a good idea to
-use a small disk partition as swap space - this space is used by the kernel
-to store seldom-used data to make room in memory for more urgent stuff.
-The swap partition for your LFS system can be the same one as for your host
-system, so you won't have to create another if your host system already uses
-a swap partition.</para>
-
-<para>Start a disk partitioning program such as <command>cfdisk</command>
-or <command>fdisk</command> with an argument naming the hard disk upon
-which the new partition must be created - for example
-<filename>/dev/hda</filename> for the primary IDE disk. Create a Linux native
-partition and a swap partition, if needed. Please refer to the man pages of
-<command>cfdisk</command> or <command>fdisk</command> if you don't yet
-know how to use the programs.</para>
-
-<para>Remember the designation of your new partition - something like
-<filename>hda5</filename>. This book will refer to it as the LFS partition.
-If you (now) also have a swap partition, remember its designation too. These
-names will later be needed for the <filename>/etc/fstab</filename> file.</para>
--->
-
 </sect1>
diff --git a/chapter02/introduction.xml b/chapter02/introduction.xml
index 38b6c20fa..4a2728377 100644
--- a/chapter02/introduction.xml
+++ b/chapter02/introduction.xml
@@ -9,10 +9,4 @@
 
 <para>See testing</para>
 
-<!--
-<para>In this chapter the partition which will host the LFS system is
-prepared. We will create the partition itself, make a file system on it,
-and mount it.</para>
--->
-
 </sect1>
diff --git a/chapter02/mounting.xml b/chapter02/mounting.xml
index 52e4409aa..bd2b69824 100644
--- a/chapter02/mounting.xml
+++ b/chapter02/mounting.xml
@@ -9,46 +9,4 @@
 
 <para>See testing</para>
 
-<!--
-<para>Now that we've created a file system, we want to be able to access
-the partition. For that, we need to mount it, and have to choose a mount
-point. In this book we assume that the file system is mounted under
-<filename class="directory">/mnt/lfs</filename>, but it doesn't matter what directory
-you choose.</para>
-
-<para>Choose a mount point and assign it to the LFS environment variable
-by running:</para>
-
-<screen><userinput>export LFS=/mnt/lfs</userinput></screen>
-
-<para>Now create the mount point and mount the LFS file system by running:</para>
-
-<screen><userinput>mkdir -p $LFS
-mount /dev/<replaceable>[xxx]</replaceable> $LFS</userinput></screen>
-
-<para>Replace <replaceable>[xxx]</replaceable> with the designation of the LFS
-partition.</para>
-
-<para>If you have decided to use multiple partitions for LFS (say one for
-<filename class="directory">/</filename> and another for 
-<filename class="directory">/usr</filename>), mount them like this:</para>
-
-<screen><userinput>mkdir -p $LFS
-mount /dev/<replaceable>[xxx]</replaceable> $LFS
-mkdir $LFS/usr
-mount /dev/<replaceable>[yyy]</replaceable> $LFS/usr</userinput></screen>
-
-<para>Of course, replace <replaceable>[xxx]</replaceable> and
-<replaceable>[yyy]</replaceable> with the appropriate partition names.</para>
-
-<para>You should also ensure that this new partition is not mounted with
-permissions that are too restrictive (such as the nosuid, nodev or noatime
-options). You can run the <command>mount</command> command without any
-parameters to see with what options the LFS partition is mounted. If
-you see nosuid, nodev or noatime, you will need to remount it.</para>
- 
-<para>Now that we've made ourselves a place to work in, we're ready to download
-the packages.</para>
--->
-
 </sect1>
-- 
cgit v1.2.3-54-g00ecf