From fcc027677da55c41dcaea045f5b9ff8b088e6495 Mon Sep 17 00:00:00 2001 From: Bruce Dubbs Date: Sun, 7 Jun 2020 20:16:00 +0000 Subject: Initial commit of alternative cross LFS git-svn-id: http://svn.linuxfromscratch.org/LFS/branches/cross2@11897 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689 --- chapter10/kernel.xml | 403 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 chapter10/kernel.xml (limited to 'chapter10/kernel.xml') diff --git a/chapter10/kernel.xml b/chapter10/kernel.xml new file mode 100644 index 000000000..0033028cf --- /dev/null +++ b/chapter10/kernel.xml @@ -0,0 +1,403 @@ + + + %general-entities; +]> + + + + + + kernel + &linux-version; +
&linux-url;
+ + + Linux-&linux-version; + + + Linux + + + + + + <para>The Linux package contains the Linux kernel.</para> + + <segmentedlist> + <segtitle>&buildtime;</segtitle> + <segtitle>&diskspace;</segtitle> + + <seglistitem> + <seg>&linux-ch8-sbu;</seg> + <seg>&linux-ch8-du;</seg> + </seglistitem> + </segmentedlist> + + </sect2> + + <sect2 role="installation"> + <title>Installation of the kernel + + Building the kernel involves a few steps—configuration, + compilation, and installation. Read the README file + in the kernel source tree for alternative methods to the way this book + configures the kernel. + + Prepare for compilation by running the following command: + +make mrproper + + This ensures that the kernel tree is absolutely clean. The + kernel team recommends that this command be issued prior to each + kernel compilation. Do not rely on the source tree being clean after + un-tarring. + + + + Configure the kernel via a menu-driven interface. For general + information on kernel configuration see . BLFS has some information + regarding particular kernel configuration requirements of packages outside + of LFS at . Additional + information about configuring and building the kernel can be found at + + + + + A good starting place for setting up the kernel configuration is to + run make defconfig. This will set the base + configuration to a good state that takes your current system architecture + into account. + + Be sure to enable/disable/set the following features or the system might + not work correctly or boot at all: + + +Device Drivers ---> + Generic Driver Options ---> + [ ] Support for uevent helper [CONFIG_UEVENT_HELPER] + [*] Maintain a devtmpfs filesystem to mount at /dev [CONFIG_DEVTMPFS] + +Kernel hacking ---> + Choose kernel unwinder (Frame pointer unwinder) ---> [CONFIG_UNWINDER_FRAME_POINTER] + + +General setup --> + [*] Control Group support [CONFIG_CGROUPS] + [ ] Enable deprecated sysfs features to support old userspace tools [CONFIG_SYSFS_DEPRECATED] + [*] Configure standard kernel features (expert users) [CONFIG_EXPERT] ---> + [*] open by fhandle syscalls [CONFIG_FHANDLE] + [ ] Auditing support [CONFIG_AUDIT] +Processor type and features ---> + [*] Enable seccomp to safely compute untrusted bytecode [CONFIG_SECCOMP] +Firmware Drivers ---> + [*] Export DMI identification via sysfs to userspace [CONFIG_DMIID] +Networking support ---> + Networking options ---> + <*> The IPv6 protocol [CONFIG_IPV6] +Device Drivers ---> + Generic Driver Options ---> + [ ] Support for uevent helper [CONFIG_UEVENT_HELPER] + [*] Maintain a devtmpfs filesystem to mount at /dev [CONFIG_DEVTMPFS] + Firmware Loader ---> + [ ] Enable the firmware sysfs fallback mechanism [CONFIG_FW_LOADER_USER_HELPER] +File systems ---> + [*] Inotify support for userspace [CONFIG_INOTIFY_USER] + <*> Kernel automounter support (supports v3, v4, and v5) [CONFIG_AUTOFS_FS] + Pseudo filesystems ---> + [*] Tmpfs POSIX Access Control Lists [CONFIG_TMPFS_POSIX_ACL] + [*] Tmpfs extended attributes [CONFIG_TMPFS_XATTR] + + + + While "The IPv6 Protocol" is not strictly + required, it is highly recommended by the systemd developers. + + + There are several other options that may be desired + depending on the requirements for the system. For a list of options needed + for BLFS packages, see the BLFS + Index of Kernel Settings + (&lfs-root;blfs/view/&short-version;/longindex.html#kernel-config-index). + + + If your host hardware is using UEFI, then the 'make defconfig' + above should automatically add in some EFI-related kernel options. + + In order to allow your LFS kernel to be booted from within your + host's UEFI boot environment, your kernel must have this option + selected: + +Processor type and features ---> + [*] EFI stub support [CONFIG_EFI_STUB] + + A fuller description of managing UEFI environments from within LFS + is covered by the lfs-uefi.txt hint at + . + + + + + The rationale for the above configuration items: + + + Support for uevent helper + + Having this option set may interfere with device + management when using Udev/Eudev. + + + + + Maintain a devtmpfs + + This will create automated device nodes which are populated by the + kernel, even without Udev running. Udev then runs on top of this, + managing permissions and adding symlinks. This configuration + item is required for all users of Udev/Eudev. + + + + + +make menuconfig + + + The meaning of optional make environment variables: + + + LANG=<host_LANG_value> LC_ALL= + + This establishes the locale setting to the one used on the + host. This may be needed for a proper menuconfig ncurses interface + line drawing on a UTF-8 linux text console. + + If used, be sure to replace + <host_LANG_value> by the value of + the $LANG variable from your host. You can + alternatively use instead the host's value of $LC_ALL + or $LC_CTYPE. + + + + + + Alternatively, make oldconfig may be more + appropriate in some situations. See the README + file for more information. + + If desired, skip kernel configuration by copying the kernel + config file, .config, from the host system + (assuming it is available) to the unpacked linux-&linux-version; directory. However, + we do not recommend this option. It is often better to explore all the + configuration menus and create the kernel configuration from + scratch. + + Compile the kernel image and modules: + +make + + If using kernel modules, module configuration in /etc/modprobe.d may be required. + Information pertaining to modules and kernel configuration is + located in and in the kernel + documentation in the linux-&linux-version;/Documentation directory. + Also, modprobe.d(5) may be of interest. + + Unless module support has been disabled in the kernel configuration, + install the modules with: + +make modules_install + + After kernel compilation is complete, additional steps are + required to complete the installation. Some files need to be copied to + the /boot directory. + + + If the host system has a separate /boot partition, the files copied + below should go there. The easiest way to do that is to bind /boot on the + host (outside chroot) to /mnt/lfs/boot before proceeding. As the root + user in the host system: + +mount --bind /boot /mnt/lfs/boot + + + The path to the kernel image may vary depending on the platform being + used. The filename below can be changed to suit your taste, but the stem of + the filename should be vmlinuz to be compatible with + the automatic setup of the boot process described in the next section. The + following command assumes an x86 architecture: + +cp -iv arch/x86/boot/bzImage /boot/vmlinuz-&linux-version;-lfs-&version; + +cp -iv arch/x86/boot/bzImage /boot/vmlinuz-&linux-version;-lfs-&versiond; + + System.map is a symbol file for the kernel. + It maps the function entry points of every function in the kernel API, + as well as the addresses of the kernel data structures for the running + kernel. It is used as a resource when investigating kernel problems. + Issue the following command to install the map file: + +cp -iv System.map /boot/System.map-&linux-version; + + The kernel configuration file .config + produced by the make menuconfig step + above contains all the configuration selections for the kernel + that was just compiled. It is a good idea to keep this file for future + reference: + +cp -iv .config /boot/config-&linux-version; + + Install the documentation for the Linux kernel: + +install -d /usr/share/doc/linux-&linux-version; +cp -r Documentation/* /usr/share/doc/linux-&linux-version; + + It is important to note that the files in the kernel source + directory are not owned by root. Whenever a + package is unpacked as user root (like we did + inside chroot), the files have the user and group IDs of whatever + they were on the packager's computer. This is usually not a problem + for any other package to be installed because the source tree is + removed after the installation. However, the Linux source tree is + often retained for a long time. Because of this, there is a chance + that whatever user ID the packager used will be assigned to somebody + on the machine. That person would then have write access to the kernel + source. + + + In many cases, the configuration of the kernel will need to be + updated for packages that will be installed later in BLFS. Unlike + other packages, it is not necessary to remove the kernel source tree + after the newly built kernel is installed. + + If the kernel source tree is going to be retained, run + chown -R 0:0 on the linux-&linux-version; directory to ensure + all files are owned by user root. + + + + Some kernel documentation recommends creating a symlink from + /usr/src/linux pointing to the kernel + source directory. This is specific to kernels prior to the 2.6 series and + must not be created on an LFS system as it can cause + problems for packages you may wish to build once your base LFS system is + complete. + + + + The headers in the system's include directory (/usr/include) should + always be the ones against which Glibc was compiled, + that is, the sanitised headers installed in . Therefore, they should + never be replaced by either the raw kernel headers + or any other kernel sanitized headers. + + + + + + Configuring Linux Module Load Order + + + /etc/modprobe.d/usb.conf + + + Most of the time Linux modules are loaded automatically, but + sometimes it needs some specific direction. The program that loads + modules, modprobe or insmod, uses + /etc/modprobe.d/usb.conf for this purpose. This file + needs to be created so that if the USB drivers (ehci_hcd, ohci_hcd and + uhci_hcd) have been built as modules, they will be loaded in the correct + order; ehci_hcd needs to be loaded prior to ohci_hcd and uhci_hcd in order + to avoid a warning being output at boot time. + + Create a new file /etc/modprobe.d/usb.conf by running + the following: + +install -v -m755 -d /etc/modprobe.d +cat > /etc/modprobe.d/usb.conf << "EOF" +# Begin /etc/modprobe.d/usb.conf + +install ohci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe -i ohci_hcd ; true +install uhci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe -i uhci_hcd ; true + +# End /etc/modprobe.d/usb.conf +EOF + + + + + Contents of Linux + + + Installed files + Installed directories + + + config-&linux-version;, + vmlinuz-&linux-version;-lfs-&version;, + vmlinuz-&linux-version;-lfs-&versiond;, + and System.map-&linux-version; + /lib/modules, /usr/share/doc/linux-&linux-version; + + + + + Short Descriptions + + + + + config-&linux-version; + + Contains all the configuration selections for the kernel + + /boot/config-&linux-version; + + + + + + vmlinuz-&linux-version;-lfs-&version; + vmlinuz-&linux-version;-lfs-&versiond; + + The engine of the Linux system. When turning on the computer, + the kernel is the first part of the operating system that gets loaded. + It detects and initializes all components of the computer's hardware, + then makes these components available as a tree of files to the + software and turns a single CPU into a multitasking machine capable + of running scores of programs seemingly at the same time + + lfskernel-&linux-version; + + + + + + System.map-&linux-version; + + A list of addresses and symbols; it maps the entry points and + addresses of all the functions and data structures in the + kernel + + /boot/System.map-&linux-version; + + + + + + + + + -- cgit v1.2.3-54-g00ecf From fb386e05f17d44dc6322a1b3db172cc297ed5ce5 Mon Sep 17 00:00:00 2001 From: Thomas Trepl Date: Thu, 11 Jun 2020 12:55:28 +0000 Subject: Rename package entities to be independent of chapter numbering git-svn-id: http://svn.linuxfromscratch.org/LFS/branches/cross2@11921 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689 --- chapter05/binutils-pass1.xml | 4 +- chapter05/gcc-pass1.xml | 4 +- chapter05/glibc.xml | 4 +- chapter05/libstdc++.xml | 4 +- chapter05/linux-headers.xml | 4 +- chapter06/bash.xml | 4 +- chapter06/binutils-pass2.xml | 4 +- chapter06/coreutils.xml | 4 +- chapter06/diffutils.xml | 4 +- chapter06/file.xml | 4 +- chapter06/findutils.xml | 4 +- chapter06/gawk.xml | 4 +- chapter06/gcc-pass2.xml | 4 +- chapter06/grep.xml | 4 +- chapter06/gzip.xml | 4 +- chapter06/m4.xml | 4 +- chapter06/make.xml | 4 +- chapter06/ncurses.xml | 4 +- chapter06/patch.xml | 4 +- chapter06/sed.xml | 4 +- chapter06/tar.xml | 4 +- chapter06/xz.xml | 4 +- chapter07/bison.xml | 4 +- chapter07/dejagnu.xml | 4 +- chapter07/expect.xml | 4 +- chapter07/gettext.xml | 4 +- chapter07/libstdc++-pass2.xml | 4 +- chapter07/perl.xml | 4 +- chapter07/python.xml | 4 +- chapter07/stripping.xml | 2 +- chapter07/tcl.xml | 4 +- chapter07/texinfo.xml | 4 +- chapter07/util-linux.xml | 4 +- chapter08/acl.xml | 4 +- chapter08/attr.xml | 4 +- chapter08/autoconf.xml | 6 +- chapter08/automake.xml | 4 +- chapter08/bash.xml | 4 +- chapter08/bc.xml | 4 +- chapter08/binutils.xml | 4 +- chapter08/bison.xml | 4 +- chapter08/bzip2.xml | 4 +- chapter08/check.xml | 4 +- chapter08/coreutils.xml | 4 +- chapter08/dbus.xml | 4 +- chapter08/diffutils.xml | 4 +- chapter08/e2fsprogs.xml | 4 +- chapter08/eudev.xml | 4 +- chapter08/expat.xml | 4 +- chapter08/file.xml | 4 +- chapter08/findutils.xml | 4 +- chapter08/flex.xml | 4 +- chapter08/gawk.xml | 4 +- chapter08/gcc.xml | 4 +- chapter08/gdbm.xml | 4 +- chapter08/gettext.xml | 4 +- chapter08/glibc.xml | 4 +- chapter08/gmp.xml | 4 +- chapter08/gperf.xml | 4 +- chapter08/grep.xml | 4 +- chapter08/groff.xml | 4 +- chapter08/grub.xml | 4 +- chapter08/gzip.xml | 4 +- chapter08/iana-etc.xml | 4 +- chapter08/inetutils.xml | 4 +- chapter08/intltool.xml | 4 +- chapter08/iproute2.xml | 4 +- chapter08/kbd.xml | 4 +- chapter08/kmod.xml | 4 +- chapter08/less.xml | 4 +- chapter08/libcap.xml | 4 +- chapter08/libelf.xml | 4 +- chapter08/libffi.xml | 4 +- chapter08/libpipeline.xml | 4 +- chapter08/libtool.xml | 4 +- chapter08/m4.xml | 4 +- chapter08/make.xml | 4 +- chapter08/man-db.xml | 4 +- chapter08/man-pages.xml | 4 +- chapter08/meson.xml | 4 +- chapter08/mpc.xml | 4 +- chapter08/mpfr.xml | 4 +- chapter08/ncurses.xml | 4 +- chapter08/ninja.xml | 4 +- chapter08/openssl.xml | 4 +- chapter08/patch.xml | 4 +- chapter08/perl.xml | 4 +- chapter08/pkgconfig.xml | 4 +- chapter08/procps.xml | 4 +- chapter08/psmisc.xml | 4 +- chapter08/python.xml | 4 +- chapter08/readline.xml | 4 +- chapter08/sed.xml | 4 +- chapter08/shadow.xml | 4 +- chapter08/sysklogd.xml | 4 +- chapter08/systemd.xml | 4 +- chapter08/sysvinit.xml | 4 +- chapter08/tar.xml | 4 +- chapter08/texinfo.xml | 4 +- chapter08/util-linux.xml | 4 +- chapter08/vim.xml | 4 +- chapter08/xml-parser.xml | 4 +- chapter08/xz.xml | 4 +- chapter08/zlib.xml | 4 +- chapter08/zstd.xml | 4 +- chapter09/bootscripts.xml | 4 +- chapter10/kernel.xml | 4 +- packages.ent | 443 +++++++++++++++++++++--------------------- 108 files changed, 439 insertions(+), 432 deletions(-) (limited to 'chapter10/kernel.xml') diff --git a/chapter05/binutils-pass1.xml b/chapter05/binutils-pass1.xml index 00816c94a..914e119b8 100644 --- a/chapter05/binutils-pass1.xml +++ b/chapter05/binutils-pass1.xml @@ -33,8 +33,8 @@ &diskspace; - &binutils-ch5p1-sbu; - &binutils-ch5p1-du; + &binutils-tmpp1-sbu; + &binutils-tmpp1-du; diff --git a/chapter05/gcc-pass1.xml b/chapter05/gcc-pass1.xml index 2f8145713..e2a13a003 100644 --- a/chapter05/gcc-pass1.xml +++ b/chapter05/gcc-pass1.xml @@ -33,8 +33,8 @@ &diskspace; - &gcc-ch5p1-sbu; - &gcc-ch5p1-du; + &gcc-tmpp1-sbu; + &gcc-tmpp1-du; diff --git a/chapter05/glibc.xml b/chapter05/glibc.xml index 361dd0e58..80d1638f5 100644 --- a/chapter05/glibc.xml +++ b/chapter05/glibc.xml @@ -33,8 +33,8 @@ &diskspace; - &glibc-ch5-sbu; - &glibc-ch5-du; + &glibc-tmp-sbu; + &glibc-tmp-du; diff --git a/chapter05/libstdc++.xml b/chapter05/libstdc++.xml index 5058be9a5..0153766c4 100644 --- a/chapter05/libstdc++.xml +++ b/chapter05/libstdc++.xml @@ -37,8 +37,8 @@ &diskspace; - &libstdcpp-ch5-sbu; - &libstdcpp-ch5-du; + &libstdcpp-tmp-sbu; + &libstdcpp-tmp-du; diff --git a/chapter05/linux-headers.xml b/chapter05/linux-headers.xml index 6c1af3173..213fe7dc3 100644 --- a/chapter05/linux-headers.xml +++ b/chapter05/linux-headers.xml @@ -32,8 +32,8 @@ &diskspace; - &linux-headers-ch5-sbu; - &linux-headers-ch5-du; + &linux-headers-tmp-sbu; + &linux-headers-tmp-du; diff --git a/chapter06/bash.xml b/chapter06/bash.xml index bc0b211af..6cb1dc728 100644 --- a/chapter06/bash.xml +++ b/chapter06/bash.xml @@ -33,8 +33,8 @@ &diskspace; - &bash-ch5-sbu; - &bash-ch5-du; + &bash-tmp-sbu; + &bash-tmp-du; diff --git a/chapter06/binutils-pass2.xml b/chapter06/binutils-pass2.xml index d88bb84e2..5ccff98d8 100644 --- a/chapter06/binutils-pass2.xml +++ b/chapter06/binutils-pass2.xml @@ -33,8 +33,8 @@ &diskspace; - &binutils-ch5p2-sbu; - &binutils-ch5p2-du; + &binutils-tmpp2-sbu; + &binutils-tmpp2-du; diff --git a/chapter06/coreutils.xml b/chapter06/coreutils.xml index 3ae765e85..fe036755e 100644 --- a/chapter06/coreutils.xml +++ b/chapter06/coreutils.xml @@ -33,8 +33,8 @@ &diskspace; - &coreutils-ch5-sbu; - &coreutils-ch5-du; + &coreutils-tmp-sbu; + &coreutils-tmp-du; diff --git a/chapter06/diffutils.xml b/chapter06/diffutils.xml index 6594058be..af4d95429 100644 --- a/chapter06/diffutils.xml +++ b/chapter06/diffutils.xml @@ -33,8 +33,8 @@ &diskspace; - &diffutils-ch5-sbu; - &diffutils-ch5-du; + &diffutils-tmp-sbu; + &diffutils-tmp-du; diff --git a/chapter06/file.xml b/chapter06/file.xml index a13553b19..2506f4432 100644 --- a/chapter06/file.xml +++ b/chapter06/file.xml @@ -33,8 +33,8 @@ &diskspace; - &file-ch5-sbu; - &file-ch5-du; + &file-tmp-sbu; + &file-tmp-du; diff --git a/chapter06/findutils.xml b/chapter06/findutils.xml index bf9f9c62a..e6a19202b 100644 --- a/chapter06/findutils.xml +++ b/chapter06/findutils.xml @@ -33,8 +33,8 @@ &diskspace; - &findutils-ch5-sbu; - &findutils-ch5-du; + &findutils-tmp-sbu; + &findutils-tmp-du; diff --git a/chapter06/gawk.xml b/chapter06/gawk.xml index 105abdb8e..efe7b4380 100644 --- a/chapter06/gawk.xml +++ b/chapter06/gawk.xml @@ -33,8 +33,8 @@ &diskspace; - &gawk-ch5-sbu; - &gawk-ch5-du; + &gawk-tmp-sbu; + &gawk-tmp-du; diff --git a/chapter06/gcc-pass2.xml b/chapter06/gcc-pass2.xml index a5b7f1a26..532a8e8b4 100644 --- a/chapter06/gcc-pass2.xml +++ b/chapter06/gcc-pass2.xml @@ -33,8 +33,8 @@ &diskspace; - &gcc-ch5p2-sbu; - &gcc-ch5p2-du; + &gcc-tmpp2-sbu; + &gcc-tmpp2-du; diff --git a/chapter06/grep.xml b/chapter06/grep.xml index 6a8ada4b8..494b8616d 100644 --- a/chapter06/grep.xml +++ b/chapter06/grep.xml @@ -33,8 +33,8 @@ &diskspace; - &grep-ch5-sbu; - &grep-ch5-du; + &grep-tmp-sbu; + &grep-tmp-du; diff --git a/chapter06/gzip.xml b/chapter06/gzip.xml index e5b5d0a37..90d554b0d 100644 --- a/chapter06/gzip.xml +++ b/chapter06/gzip.xml @@ -33,8 +33,8 @@ &diskspace; - &gzip-ch5-sbu; - &gzip-ch5-du; + &gzip-tmp-sbu; + &gzip-tmp-du; diff --git a/chapter06/m4.xml b/chapter06/m4.xml index 79559f6da..7a28a08cc 100644 --- a/chapter06/m4.xml +++ b/chapter06/m4.xml @@ -33,8 +33,8 @@ &diskspace; - &m4-ch5-sbu; - &m4-ch5-du; + &m4-tmp-sbu; + &m4-tmp-du; diff --git a/chapter06/make.xml b/chapter06/make.xml index fef5555aa..cf0dbce18 100644 --- a/chapter06/make.xml +++ b/chapter06/make.xml @@ -32,8 +32,8 @@ &diskspace; - &make-ch5-sbu; - &make-ch5-du; + &make-tmp-sbu; + &make-tmp-du; diff --git a/chapter06/ncurses.xml b/chapter06/ncurses.xml index d96d7d0f3..83499f2eb 100644 --- a/chapter06/ncurses.xml +++ b/chapter06/ncurses.xml @@ -33,8 +33,8 @@ &diskspace; - &ncurses-ch5-sbu; - &ncurses-ch5-du; + &ncurses-tmp-sbu; + &ncurses-tmp-du; diff --git a/chapter06/patch.xml b/chapter06/patch.xml index ecd5b2c47..7032d6eea 100644 --- a/chapter06/patch.xml +++ b/chapter06/patch.xml @@ -33,8 +33,8 @@ &diskspace; - &patch-ch5-sbu; - &patch-ch5-du; + &patch-tmp-sbu; + &patch-tmp-du; diff --git a/chapter06/sed.xml b/chapter06/sed.xml index f146b5102..d079f836d 100644 --- a/chapter06/sed.xml +++ b/chapter06/sed.xml @@ -33,8 +33,8 @@ &diskspace; - &sed-ch5-sbu; - &sed-ch5-du; + &sed-tmp-sbu; + &sed-tmp-du; diff --git a/chapter06/tar.xml b/chapter06/tar.xml index e64379fc5..8a82cff5c 100644 --- a/chapter06/tar.xml +++ b/chapter06/tar.xml @@ -33,8 +33,8 @@ &diskspace; - &tar-ch5-sbu; - &tar-ch5-du; + &tar-tmp-sbu; + &tar-tmp-du; diff --git a/chapter06/xz.xml b/chapter06/xz.xml index 428053ed1..f8d397d1b 100644 --- a/chapter06/xz.xml +++ b/chapter06/xz.xml @@ -33,8 +33,8 @@ &diskspace; - &xz-ch5-sbu; - &xz-ch5-du; + &xz-tmp-sbu; + &xz-tmp-du; diff --git a/chapter07/bison.xml b/chapter07/bison.xml index 4e794eb44..a3718bf19 100644 --- a/chapter07/bison.xml +++ b/chapter07/bison.xml @@ -33,8 +33,8 @@ &diskspace; - &bison-ch5-sbu; - &bison-ch5-du; + &bison-tmp-sbu; + &bison-tmp-du; diff --git a/chapter07/dejagnu.xml b/chapter07/dejagnu.xml index 727173d0e..da6a44aa9 100644 --- a/chapter07/dejagnu.xml +++ b/chapter07/dejagnu.xml @@ -32,8 +32,8 @@ &diskspace; - &dejagnu-ch5-sbu; - &dejagnu-ch5-du; + &dejagnu-tmp-sbu; + &dejagnu-tmp-du; diff --git a/chapter07/expect.xml b/chapter07/expect.xml index 7e59bda8b..e73676857 100644 --- a/chapter07/expect.xml +++ b/chapter07/expect.xml @@ -38,8 +38,8 @@ &diskspace; - &expect-ch5-sbu; - &expect-ch5-du; + &expect-tmp-sbu; + &expect-tmp-du; diff --git a/chapter07/gettext.xml b/chapter07/gettext.xml index a8f5be287..12a8b5cfd 100644 --- a/chapter07/gettext.xml +++ b/chapter07/gettext.xml @@ -33,8 +33,8 @@ &diskspace; - &gettext-ch5-sbu; - &gettext-ch5-du; + &gettext-tmp-sbu; + &gettext-tmp-du; diff --git a/chapter07/libstdc++-pass2.xml b/chapter07/libstdc++-pass2.xml index a10309f4b..a98bfb282 100644 --- a/chapter07/libstdc++-pass2.xml +++ b/chapter07/libstdc++-pass2.xml @@ -35,8 +35,8 @@ &diskspace; - &libstdcpp-ch5-sbu; - &libstdcpp-ch5-du; + &libstdcpp-tmp-sbu; + &libstdcpp-tmp-du; diff --git a/chapter07/perl.xml b/chapter07/perl.xml index 62b7f4e12..d282fb4ba 100644 --- a/chapter07/perl.xml +++ b/chapter07/perl.xml @@ -33,8 +33,8 @@ &diskspace; - &perl-ch5-sbu; - &perl-ch5-du; + &perl-tmp-sbu; + &perl-tmp-du; diff --git a/chapter07/python.xml b/chapter07/python.xml index 17af90999..9354bb99e 100644 --- a/chapter07/python.xml +++ b/chapter07/python.xml @@ -33,8 +33,8 @@ &diskspace; - &python-ch5-sbu; - &python-ch5-du; + &python-tmp-sbu; + &python-tmp-du; diff --git a/chapter07/stripping.xml b/chapter07/stripping.xml index 88b44b883..2f62fd5f2 100644 --- a/chapter07/stripping.xml +++ b/chapter07/stripping.xml @@ -140,7 +140,7 @@ tar -cJpf $HOME/temp-tools.tar.xz . In case some mistakes have been made and you need to start over, you can - use this backup to restore the temporary tools and save some irecovery time. + use this backup to restore the temporary tools and save some recovery time. Since the sources are located under $LFS, they are included in the backup archive as well, so you need not to download them again. After diff --git a/chapter07/tcl.xml b/chapter07/tcl.xml index d64852d43..39219b06b 100644 --- a/chapter07/tcl.xml +++ b/chapter07/tcl.xml @@ -34,8 +34,8 @@ &diskspace; - &tcl-ch5-sbu; - &tcl-ch5-du; + &tcl-tmp-sbu; + &tcl-tmp-du; diff --git a/chapter07/texinfo.xml b/chapter07/texinfo.xml index b58c701e6..3ce3d08b9 100644 --- a/chapter07/texinfo.xml +++ b/chapter07/texinfo.xml @@ -33,8 +33,8 @@ &diskspace; - &texinfo-ch5-sbu; - &texinfo-ch5-du; + &texinfo-tmp-sbu; + &texinfo-tmp-du; diff --git a/chapter07/util-linux.xml b/chapter07/util-linux.xml index f9401c03a..05698ae66 100644 --- a/chapter07/util-linux.xml +++ b/chapter07/util-linux.xml @@ -31,8 +31,8 @@ &diskspace; - &util-linux-ch5-sbu; - &util-linux-ch5-du; + &util-linux-tmp-sbu; + &util-linux-tmp-du; diff --git a/chapter08/acl.xml b/chapter08/acl.xml index f9f2eddbe..03f057cb3 100644 --- a/chapter08/acl.xml +++ b/chapter08/acl.xml @@ -32,8 +32,8 @@ &diskspace; - &acl-ch6-sbu; - &acl-ch6-du; + &acl-fin-sbu; + &acl-fin-du; diff --git a/chapter08/attr.xml b/chapter08/attr.xml index 10c6eec53..0033ae58f 100644 --- a/chapter08/attr.xml +++ b/chapter08/attr.xml @@ -31,8 +31,8 @@ &diskspace; - &attr-ch6-sbu; - &attr-ch6-du; + &attr-fin-sbu; + &attr-fin-du; diff --git a/chapter08/autoconf.xml b/chapter08/autoconf.xml index 6652747fd..c490a3994 100644 --- a/chapter08/autoconf.xml +++ b/chapter08/autoconf.xml @@ -31,8 +31,8 @@ &diskspace; - &autoconf-ch6-sbu; - &autoconf-ch6-du; + &autoconf-fin-sbu; + &autoconf-fin-du; @@ -59,7 +59,7 @@ make check + Allowed deviation in disk usage : 2% + + Suffixes: + *-tmp-* Package info for Temporary Tools + *-fin-* Package info for Final System + *-cfg-* Package info for System Configuration + *-knl-* Package info for Kernel stuff +--> - - + + - - + + - - - + + + @@ -37,58 +44,58 @@ - - + + - - - - + + + + - - + + - - - - - - + + + + + + - - - - + + + + - - - - + + + + @@ -105,75 +112,75 @@ - - + + - - - - + + + + - - + + - - + + - - - - + + + + - - + + - - + + - - + + - - + + @@ -181,60 +188,60 @@ - - + + - - - - + + + + - - - - + + + + - - - - + + + + - - - - + + + + - - - - - - + + + + + + @@ -243,36 +250,36 @@ - - + + - - + + - - - - + + + + - - - - + + + + @@ -280,148 +287,148 @@ - - + + - - + + - - - - + + + + - - + + - - + + - - - - + + + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + @@ -435,143 +442,143 @@ - - + + - - - - + + + + - - - - + + + + - - - - + + + + - - + + - - + + - - + + - - + + - - + + - - - - + + + + - - + + - - + + - - - - + + + + - - - - + + + + - - + + - - + + - - + + @@ -582,10 +589,10 @@ - - - - + + + + @@ -595,34 +602,34 @@ - - + + - - - - + + + + - - + + - - + + @@ -637,26 +644,26 @@ - - + + - - + + - - - - + + + + @@ -664,18 +671,18 @@ - - + + - - - - + + + + @@ -695,10 +702,10 @@ - - - - + + + + @@ -708,40 +715,40 @@ - - + + - - + + - - - - + + + + - - + + - - + + -- cgit v1.2.3-54-g00ecf