From 15c7d39533a1eb1da0748011f3378fd0f02ed14d Mon Sep 17 00:00:00 2001 From: Matthew Burgess Date: Tue, 8 Oct 2013 20:03:29 +0000 Subject: Update stylesheets to docbook-xsl-1.78.1. git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@10355 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689 --- .../lfs-xsl/docbook-xsl-snapshot/xhtml/pi.xsl | 1182 -------------------- 1 file changed, 1182 deletions(-) delete mode 100644 stylesheets/lfs-xsl/docbook-xsl-snapshot/xhtml/pi.xsl (limited to 'stylesheets/lfs-xsl/docbook-xsl-snapshot/xhtml/pi.xsl') diff --git a/stylesheets/lfs-xsl/docbook-xsl-snapshot/xhtml/pi.xsl b/stylesheets/lfs-xsl/docbook-xsl-snapshot/xhtml/pi.xsl deleted file mode 100644 index 5bd4d886d..000000000 --- a/stylesheets/lfs-xsl/docbook-xsl-snapshot/xhtml/pi.xsl +++ /dev/null @@ -1,1182 +0,0 @@ - - - - - - - -HTML Processing Instruction Reference - - $Id$ - - - - Introduction - This is generated reference documentation for all - user-specifiable processing instructions (PIs) in the DocBook - XSL stylesheets for HTML output. - - You add these PIs at particular points in a document to - cause specific “exceptions” to formatting/output behavior. To - make global changes in formatting/output behavior across an - entire document, it’s better to do it by setting an - appropriate stylesheet parameter (if there is one). - - - - - - - - - Sets background color for an image - - Use the dbhtml background-color PI before or - after an image (graphic, inlinegraphic, - imagedata, or videodata element) as a - sibling to the element, to set a background color for the - image. - - - dbhtml background-color="color" - - - - background-color="color" - - An HTML color value - - - - - - Background color - - - - - - - - - - - - Sets background color on a table row or table cell - - Use the dbhtml bgcolor PI as child of a table row - or cell to set a background color for that table row or cell. - - - dbhtml bgcolor="color" - - - - bgcolor="color" - - An HTML color value - - - - - - Cell background color - - - - - - - - - - - - Specifies cellpadding in table or qandaset output - - Use the dbhtml cellpadding PI as a child of a - table or qandaset to specify the value - for the HTML cellpadding attribute in the - output HTML table. - - - dbhtml cellpadding="number" - - - - cellpadding="number" - - Specifies the cellpadding - - - - - - html.cellpadding - - - Cell spacing and cell padding, - Q and A formatting - - - - - - - - - - - - Specifies cellspacing in table or qandaset output - - Use the dbhtml cellspacing PI as a child of a - table or qandaset to specify the value - for the HTML cellspacing attribute in the - output HTML table. - - - dbhtml cellspacing="number" - - - - cellspacing="number" - - Specifies the cellspacing - - - - - - html.cellspacing - - - Cell spacing and cell padding, - Q and A formatting - - - - - - - - - - - - Set value of the class attribute for a table row - - Use the dbhtml class PI as a child of a - row to specify a class - attribute and value in the HTML output for that row. - - - dbhtml class="name" - - - - class="name" - - Specifies the class name - - - - - - Table styles in HTML output - - - - - - - - - - - - Specifies a directory name in which to write files - - When chunking output, use the dbhtml dir PI - as a child of a chunk source to cause the output of that - chunk to be written to the specified directory; also, use it - as a child of a mediaobject to specify a - directory into which any long-description files for that - mediaobject will be written. - - - dbhtml dir="path" - - - - dir="path" - - Specifies the pathname for the directory - - - - - - base.dir - - - dbhtml dir processing instruction - - - - - - - - - - - - Specifies a filename for a chunk - - When chunking output, use the dbhtml filename - PI as a child of a chunk source to specify a filename for - the output file for that chunk. - - - dbhtml filename="filename" - - - - filename="path" - - Specifies the filename for the file - - - - - - use.id.as.filename - - - dbhtml filenames - - - - - - - - - - - - Specifies presentation style for a funcsynopsis - - Use the dbhtml funcsynopsis-style PI as a child of - a funcprototype or anywhere within a funcprototype - control the presentation style for the funcsynopsis - in output. - - - dbhtml funcsynopsis-style="kr"|"ansi" - - - - funcsynopsis-style="kr" - - Displays the funcprototype in K&R style - - - funcsynopsis-style="ansi" - - Displays the funcprototype in ANSI style - - - - - - funcsynopsis.style - - - - - - - - - - - - Specifies a path to the location of an image file - - Use the dbhtml img.src.path PI before or - after an image (graphic, - inlinegraphic, imagedata, or - videodata element) as a sibling to the element, - to specify a path to the location of the image; in HTML - output, the value specified for the - img.src.path attribute is prepended to the - filename. - - - dbhtml img.src.path="path" - - - - img.src.path="path" - - Specifies the pathname to prepend to the name of the image file - - - - - - img.src.path - - - Using fileref - - - - - - - - - - - - Specifies the label width for a qandaset - - Use the dbhtml label-width PI as a child of a - qandaset to specify the width of labels. - - - dbhtml label-width="width" - - - - label-width="width" - - Specifies the label width (including units) - - - - - - Q and A formatting - - - - - - - - - - - - Specifies interval for lines numbers in verbatims - - Use the dbhtml linenumbering.everyNth PI as a child - of a “verbatim” element – programlisting, - screen, synopsis — to specify - the interval at which lines are numbered. - - - dbhtml linenumbering.everyNth="N" - - - - linenumbering.everyNth="N" - - Specifies numbering interval; a number is output - before every Nth line - - - - - - linenumbering.everyNth - - - Line numbering - - - - - - - - - - - - Specifies separator text for line numbers in verbatims - - Use the dbhtml linenumbering.separator PI as a child - of a “verbatim” element – programlisting, - screen, synopsis — to specify - the separator text output between the line numbers and content. - - - dbhtml linenumbering.separator="text" - - - - linenumbering.separator="text" - - Specifies the text (zero or more characters) - - - - - - linenumbering.separator - - - Line numbering - - - - - - - - - - - - Specifies width for line numbers in verbatims - - Use the dbhtml linenumbering.width PI as a child - of a “verbatim” element – programlisting, - screen, synopsis — to specify - the width set aside for line numbers. - - - dbhtml linenumbering.width="width" - - - - linenumbering.width="width" - - Specifies the width (inluding units) - - - - - - linenumbering.width - - - Line numbering - - - - - - - - - - - - Specifies presentation style for a variablelist or - segmentedlist - - Use the dbhtml list-presentation PI as a child of - a variablelist or segmentedlist to - control the presentation style for the list (to cause it, for - example, to be displayed as a table). - - - dbhtml list-presentation="list"|"table" - - - - list-presentation="list" - - Displays the list as a list - - - list-presentation="table" - - Displays the list as a table - - - - - - - - variablelist.as.table - - - segmentedlist.as.table - - - - - Variable list formatting in HTML - - - - - - - - - - - - Specifies the width of a variablelist or simplelist - - Use the dbhtml list-width PI as a child of a - variablelist or a simplelist presented - as a table, to specify the output width. - - - dbhtml list-width="width" - - - - list-width="width" - - Specifies the output width (including units) - - - - - - Variable list formatting in HTML - - - - - - - - - - - - Specifies the height for a table row - - Use the dbhtml row-height PI as a child of a - row to specify the height of the row. - - - dbhtml row-height="height" - - - - row-height="height" - - Specifies the label height (including units) - - - - - - Row height - - - - - - - - - - - - (obsolete) Sets the starting number on an ordered list - - This PI is obsolete. The intent of - this PI was to provide a means for setting a specific starting - number for an ordered list. Instead of this PI, set a value - for the override attribute on the first - listitem in the list; that will have the same - effect as what this PI was intended for. - - - dbhtml start="character" - - - - start="character" - - Specifies the character to use as the starting - number; use 0-9, a-z, A-Z, or lowercase or uppercase - Roman numerals - - - - - - List starting number - - - - - - - - - - - - Specifies summary for table, variablelist, segmentedlist, or qandaset output - - Use the dbhtml table-summary PI as a child of - a table, variablelist, - segmentedlist, or qandaset to specify - the text for the HTML summary attribute - in the output HTML table. - - - dbhtml table-summary="text" - - - - table-summary="text" - - Specifies the summary text (zero or more characters) - - - - - - Variable list formatting in HTML, - Table summary text - - - - - - - - - - - - Specifies the width for a table - - Use the dbhtml table-width PI as a child of a - table to specify the width of the table in - output. - - - dbhtml table-width="width" - - - - table-width="width" - - Specifies the table width (including units or as a percentage) - - - - - - default.table.width - - - Table width - - - - - - - - - - - - Sets character formatting for terms in a variablelist - - Use the dbhtml term-presentation PI as a child - of a variablelist to set character formatting for - the term output of the list. - - - dbhtml term-presentation="bold"|"italic"|"bold-italic" - - - - term-presentation="bold" - - Specifies that terms are displayed in bold - - - term-presentation="italic" - - Specifies that terms are displayed in italic - - - term-presentation="bold-italic" - - Specifies that terms are displayed in bold-italic - - - - - - Variable list formatting in HTML - - - - - - - - - - - - Specifies separator text among terms in a varlistentry - - Use the dbhtml term-separator PI as a child - of a variablelist to specify the separator text - among term instances. - - - dbhtml term-separator="text" - - - - term-separator="text" - - Specifies the text (zero or more characters) - - - - - - variablelist.term.separator - - - Variable list formatting in HTML - - - - - - - - - - - - Specifies the term width for a variablelist - - Use the dbhtml term-width PI as a child of a - variablelist to specify the width for - term output. - - - dbhtml term-width="width" - - - - term-width="width" - - Specifies the term width (including units) - - - - - - Variable list formatting in HTML - - - - - - - - - - - - Specifies whether a TOC should be generated for a qandaset - - Use the dbhtml toc PI as a child of a - qandaset to specify whether a table of contents - (TOC) is generated for the qandaset. - - - dbhtml toc="0"|"1" - - - - toc="0" - - If zero, no TOC is generated - - - toc="1" - - If 1 (or any non-zero value), - a TOC is generated - - - - - - Q and A list of questions, - Q and A formatting - - - - - - - - - - - - Generates a hyperlinked list of commands - - Use the dbcmdlist PI as the child of any - element (for example, refsynopsisdiv) containing multiple - cmdsynopsis instances; a hyperlinked navigational - “command list” will be generated at the top of output for that - element, enabling users to quickly jump - to each command synopsis. - - - dbcmdlist - - - [No parameters] - - - - - - No cmdsynopsis elements matched dbcmdlist PI, perhaps it's nested too deep? - - -
- - - -
- - - - Generates a hyperlinked list of functions - - Use the dbfunclist PI as the child of any - element (for example, refsynopsisdiv) containing multiple - funcsynopsis instances; a hyperlinked - navigational “function list” will be generated at the top of - output for that element, enabling users to quickly - jump to to each function synopsis. - - - dbfunclist - - - [No parameters] - - - - - - No funcsynopsis elements matched dbfunclist PI, perhaps it's nested too deep? - - -
- - - -
- - - - Copies an external well-formed HTML/XML file into current doc - - Use the dbhtml-include href PI anywhere in a - document to cause the contents of the file referenced by the - href pseudo-attribute to be copied/inserted “as - is” into your HTML output at the point in document order - where the PI occurs in the source. - - The referenced file may contain plain text (as long as - it is “wrapped” in an html element — see the - note below) or markup in any arbitrary vocabulary, - including HTML — but it must conform to XML - well-formedness constraints (because the feature in XSLT - 1.0 for opening external files, the - document() function, can only handle - files that meet XML well-formedness constraints). - Among other things, XML well-formedness constraints - require a document to have a single root - element. So if the content you want to - include is plain text or is markup that does - not have a single root element, - wrap the content in an - html element. The stylesheets will - strip out that surrounding html “wrapper” when - they find it, leaving just the content you want to - insert. - - - - dbhtml-include href="URI" - - - - href="URI" - - Specifies the URI for the file to include; the URI - can be, for example, a remote http: - URI, or a local filesystem file: - URI - - - - - - textinsert.extension - - - Inserting external HTML code, - External code files - - - - - - - href - - - - - - - - - - - - - - - - - - - - ERROR: dbhtml-include processing instruction - href has no content. - - - - - - - ERROR: dbhtml-include processing instruction has - missing or empty href value. - - - - - - - - - - - - filename - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - # - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - # - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - / - - - - / - - - - - - - Sets topic name and topic id for context-sensitive HTML Help - - Use the dbhh PI as a child of components - that should be used as targets for context-sensitive help requests. - - - dbhh topicname="name" topicid="id" - - - - topicname="name" - - Specifies a unique string constant that identifies a help topic - - - topicid="id" - - Specifies a unique integer value for the topicname string - - - - - - Context-sensitive help - - - - - -- cgit v1.2.3-54-g00ecf