2 files changed, 22 insertions, 12 deletions
diff --git a/conf.h b/conf.h
index 6f5c652..4f5f5b3 100755
--- a/conf.h
+++ b/conf.h
@@ -14,6 +14,8 @@
 // Use internal crystal at 8MHz
 #define _XTAL_FREQ 20000000
 
+//#define DEBUG 1
+
 // Define baud rate of 9600
 #define Baud_rate 9600
 
diff --git a/main.c b/main.c
index 9c1020b..e93e992 100755
--- a/main.c
+++ b/main.c
@@ -1,7 +1,5 @@
 #include <stdio.h>                         // included for sprintf
 
-#define DEBUG 0                            // Enable/Disable debugging via UART
-
 #include "conf.h"                          //Configuration settings
 #include "main.h"                          //Declarations for main
 #include "lcd.h"                           //Declaratons for LCD
@@ -9,7 +7,7 @@
 #include "ds3231.h"                        //Declarations for RTC
 #include "beep.h"                          //Declarations for BEEP
 
-#if DEBUG
+#ifdef DEBUG
 #include "uart.h"                          //Declarations for UART
 #include "term.h"                          //Declarations for Escape codes
 #endif
@@ -21,7 +19,7 @@ int main() {
     TRISD = 0x00; // Set PORTD as outputs
     PORTD = 0x00; // Set all PORTD pins LOW
 
-#if DEBUG
+#ifdef DEBUG
     Initialize_UART(); //Initialize UART module                    
     UART_send_string(CLS); // Clear screen
     UART_send_string(CURSOR(12, 23)); // Set cursor at line 12, column 23
@@ -31,7 +29,7 @@ int main() {
 #endif
 
     I2C_Master_Init(100000); // Init I2C Master with 100KHz Clock
-#if DEBUG
+#ifdef DEBUG
     UART_send_string(CURSOR(13, 24)); // Set cursor at line 12, column 23
     UART_send_string(GREEN); // Set Green
     UART_send_string("I2C Module Initialized and active\r\n");
@@ -39,7 +37,7 @@ int main() {
 #endif
 
     Lcd_Init();
-#if DEBUG
+#ifdef DEBUG
     UART_send_string(CURSOR(14, 24)); // Set cursor at line 12, column 23
     UART_send_string(GREEN); // Set Green
     UART_send_string("LCD Module Initialized and active\r\n");
@@ -76,26 +74,36 @@ int main() {
     while (1) {
 
         // Set time and date variables from DS3231
-        //UART_send_string("Updating current date time from DS3231\r\n");
+#ifdef DEBUG
+        UART_send_string("Updating current date time from DS3231\r\n");
+#endif
         Update_Current_Date_Time();
 
         // Read temp
-        //UART_send_string("Reading Alarms and Temperature");
+#ifdef DEBUG
+        UART_send_string("Reading Alarms and Temperature");
+#endif
         Read_Alarms_Temp();
 
         // Get Alarm Status
         Get_Alarm_Status();
 
         // Separate the int timedate variables into chars
-        //UART_send_string("Formatting chars");
+#ifdef DEBUG
+        UART_send_string("Formatting chars");
+#endif
         format_DateTimeChars();
 
         // Format temperature
-        //UART_send_string("Formating temperature");
+#ifdef DEBUG
+        UART_send_string("Formating temperature");
+#endif
         format_Temperature();
 
         // Determine day of the week
-        //UART_send_string("Determining day of week");
+#ifdef DEBUG
+        UART_send_string("Determining day of week");
+#endif
         getWeekDay(dayOfWeek);
 
         // Enter loop and update display if sec changes from DS3231
@@ -106,7 +114,7 @@ int main() {
             // Set temp_sec to current sec from DS3231
             sec_chg = sec;
 
-#if DEBUG
+#ifdef DEBUG
             UART_send_string(CURSOR(19, 1));
             sprintf(buf, "%sTIME:%s\t%02d:%02d:%02d\r\n", YELLOW, CLRATTR,
                     hour, min, sec);