Move vias out from underneath the resistor arrays. May be causing solder bridges.

1 files changed, 43 insertions, 25 deletions

diff --git a/eagle/Breadboard Breakouts/Dual7Segment_with_4 digits/Dual7Segment_with_4_digits.brd b/eagle/Breadboard Breakouts/Dual7Segment_with_4 digits/Dual7Segment_with_4_digits.brd
index 9a09fa2..76dafb0 100644
--- a/eagle/Breadboard Breakouts/Dual7Segment_with_4 digits/Dual7Segment_with_4_digits.brd
+++ b/eagle/Breadboard Breakouts/Dual7Segment_with_4 digits/Dual7Segment_with_4_digits.brd
@@ -61,7 +61,7 @@
 <layer number="99" name="SpiceOrder" color="5" fill="1" visible="no" active="no"/>
 </layers>
 <board>
-<fusionsync huburn="a.YnVzaW5lc3M6Z21haWwxNDMwNTQ1" projecturn="a.YnVzaW5lc3M6Z21haWwxNDMwNTQ1I0QyMDIxMDEwNzM2OTM5OTY1MQ" f3durn="urn:adsk.wipprod:dm.lineage:UmM2BNi7RPivNJH8dEWlmw" pcbguid="ce5ac9e1-0875-462a-8225-c001a2c91dc5" lastpulledtime="" lastsyncedchangeguid="" latestrevisionid="786a14ce-1aa6-486e-92a9-0d4379feec53" lastsyncedrevisionid="786a14ce-1aa6-486e-92a9-0d4379feec53" lastboardhashguid="1a5243b6-b111-7e34-dcbb-c9afe762b19d" lastpushedtime="2021-02-19T20:31:28Z" linktopcb3d="true"/>
+<fusionsync huburn="a.YnVzaW5lc3M6Z21haWwxNDMwNTQ1" projecturn="a.YnVzaW5lc3M6Z21haWwxNDMwNTQ1I0QyMDIxMDEwNzM2OTM5OTY1MQ" f3durn="urn:adsk.wipprod:dm.lineage:UmM2BNi7RPivNJH8dEWlmw" pcbguid="" lastpulledtime="" lastsyncedchangeguid="" latestrevisionid="786a14ce-1aa6-486e-92a9-0d4379feec53" lastsyncedrevisionid="786a14ce-1aa6-486e-92a9-0d4379feec53" lastboardhashguid="1a5243b6-b111-7e34-dcbb-c9afe762b19d" lastpushedtime="2021-02-19T20:31:28Z" linktopcb3d="true"/>
 <plain>
 <wire x1="-1.016" y1="20.32" x2="-1.016" y2="0" width="0" layer="20"/>
 <wire x1="-1.016" y1="0" x2="0.254" y2="-1.27" width="0" layer="20" curve="90"/>
@@ -620,10 +620,11 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
 <wire x1="31.3944" y1="12.0396" x2="34.8996" y2="15.5448" width="0.1524" layer="16"/>
 <wire x1="18.7452" y1="12.0396" x2="18.69" y2="11.91" width="0.1524" layer="16"/>
 <wire x1="31.3944" y1="12.0396" x2="31.39" y2="11.91" width="0.1524" layer="16"/>
-<wire x1="43.5864" y1="12.4968" x2="44.0436" y2="12.0396" width="0.1524" layer="16"/>
-<wire x1="40.386" y1="15.6972" x2="43.5864" y2="12.4968" width="0.1524" layer="1"/>
+<wire x1="44.09" y1="11.91" x2="44.09" y2="13.2544" width="0.1524" layer="16"/>
+<wire x1="44.3484" y1="13.5128" x2="44.09" y2="13.2544" width="0.1524" layer="16"/>
+<wire x1="44.3484" y1="13.5128" x2="42.164" y2="15.6972" width="0.1524" layer="1"/>
+<wire x1="40.386" y1="15.6972" x2="42.164" y2="15.6972" width="0.1524" layer="1"/>
 <wire x1="34.8996" y1="15.6972" x2="40.386" y2="15.6972" width="0.1524" layer="16"/>
-<wire x1="44.0436" y1="12.0396" x2="44.09" y2="11.91" width="0.1524" layer="16"/>
 <wire x1="7.62" y1="12.4968" x2="6.096" y2="12.4968" width="0.1524" layer="16"/>
 <wire x1="13.1064" y1="17.9832" x2="7.62" y2="12.4968" width="0.1524" layer="16"/>
 <wire x1="13.1064" y1="18.288" x2="13.1064" y2="17.9832" width="0.1524" layer="16"/>
@@ -635,7 +636,7 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
 <via x="6.096" y="12.4968" extent="1-16" drill="0.254"/>
 <via x="20.7264" y="13.5636" extent="1-16" drill="0.254"/>
 <via x="25.146" y="17.9832" extent="1-16" drill="0.254"/>
-<via x="43.5864" y="12.4968" extent="1-16" drill="0.254"/>
+<via x="44.3484" y="13.5128" extent="1-16" drill="0.254"/>
 <via x="40.386" y="15.6972" extent="1-16" drill="0.254"/>
 </signal>
 <signal name="B">
@@ -703,8 +704,11 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
 <wire x1="32.1564" y1="10.668" x2="32.004" y2="10.8204" width="0.1524" layer="16"/>
 <wire x1="34.5948" y1="10.668" x2="32.1564" y2="10.668" width="0.1524" layer="16"/>
 <wire x1="35.6616" y1="11.7348" x2="34.5948" y2="10.668" width="0.1524" layer="16"/>
-<wire x1="44.0436" y1="11.7348" x2="35.6616" y2="11.7348" width="0.1524" layer="1"/>
-<wire x1="44.958" y1="10.8204" x2="44.0436" y2="11.7348" width="0.1524" layer="1"/>
+<wire x1="43.5356" y1="13.5128" x2="37.4396" y2="13.5128" width="0.1524" layer="1"/>
+<wire x1="37.4396" y1="13.5128" x2="35.6616" y2="11.7348" width="0.1524" layer="1"/>
+<wire x1="45.212" y1="11.8364" x2="45.212" y2="11.0744" width="0.1524" layer="1"/>
+<wire x1="44.958" y1="10.8204" x2="45.212" y2="11.0744" width="0.1524" layer="1"/>
+<wire x1="45.212" y1="11.8364" x2="43.5356" y2="13.5128" width="0.1524" layer="1"/>
 <wire x1="44.196" y1="10.8204" x2="44.958" y2="10.8204" width="0.1524" layer="16"/>
 <wire x1="31.3944" y1="10.8204" x2="31.39" y2="10.91" width="0.1524" layer="16"/>
 <wire x1="44.196" y1="10.8204" x2="44.09" y2="10.91" width="0.1524" layer="16"/>
@@ -764,19 +768,10 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
 <wire x1="23.3172" y1="19.05" x2="18.5928" y2="19.05" width="0.1524" layer="16"/>
 <wire x1="26.0604" y1="16.3068" x2="23.3172" y2="19.05" width="0.1524" layer="16"/>
 <wire x1="29.2608" y1="16.3068" x2="26.0604" y2="16.3068" width="0.1524" layer="16"/>
-<wire x1="29.2608" y1="12.0396" x2="29.2608" y2="16.3068" width="0.1524" layer="1"/>
-<wire x1="30.48" y1="10.8204" x2="29.2608" y2="12.0396" width="0.1524" layer="1"/>
-<wire x1="30.7848" y1="10.5156" x2="30.48" y2="10.8204" width="0.1524" layer="16"/>
-<wire x1="31.242" y1="10.5156" x2="30.7848" y2="10.5156" width="0.1524" layer="16"/>
+<wire x1="30.7848" y1="10.5156" x2="31.242" y2="10.5156" width="0.1524" layer="16"/>
 <wire x1="6.096" y1="10.3632" x2="5.99" y2="10.41" width="0.1524" layer="16"/>
 <wire x1="31.242" y1="10.5156" x2="31.39" y2="10.41" width="0.1524" layer="16"/>
-<wire x1="43.5864" y1="10.5156" x2="44.0436" y2="10.5156" width="0.1524" layer="16"/>
-<wire x1="43.2816" y1="10.8204" x2="43.5864" y2="10.5156" width="0.1524" layer="16"/>
-<wire x1="43.2816" y1="11.1252" x2="43.2816" y2="10.8204" width="0.1524" layer="16"/>
-<wire x1="33.2232" y1="11.1252" x2="43.2816" y2="11.1252" width="0.1524" layer="1"/>
-<wire x1="32.4612" y1="11.8872" x2="33.2232" y2="11.1252" width="0.1524" layer="1"/>
-<wire x1="31.5468" y1="11.8872" x2="32.4612" y2="11.8872" width="0.1524" layer="1"/>
-<wire x1="30.48" y1="10.8204" x2="31.5468" y2="11.8872" width="0.1524" layer="1"/>
+<wire x1="44.0436" y1="10.5156" x2="43.5864" y2="10.5156" width="0.1524" layer="16"/>
 <wire x1="44.0436" y1="10.5156" x2="44.09" y2="10.41" width="0.1524" layer="16"/>
 <wire x1="18.4404" y1="7.1628" x2="22.7076" y2="2.8956" width="0.1524" layer="1"/>
 <wire x1="10.3632" y1="7.1628" x2="18.4404" y2="7.1628" width="0.1524" layer="1"/>
@@ -795,8 +790,25 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
 <wire x1="29.2608" y1="16.3068" x2="29.8704" y2="16.9164" width="0.1524" layer="1"/>
 <via x="22.7076" y="2.8956" extent="1-16" drill="0.254"/>
 <via x="29.2608" y="16.3068" extent="1-16" drill="0.254"/>
-<via x="30.48" y="10.8204" extent="1-16" drill="0.254"/>
-<via x="43.2816" y="11.1252" extent="1-16" drill="0.254"/>
+<via x="30.988" y="12.5984" extent="1-16" drill="0.254"/>
+<via x="43.5356" y="12.6492" extent="1-16" drill="0.254"/>
+<wire x1="43.4655" y1="12.1655875" x2="43.5356" y2="12.2356875" width="0.1524" layer="16"/>
+<wire x1="43.5356" y1="12.2356875" x2="43.5356" y2="12.6492" width="0.1524" layer="16"/>
+<wire x1="43.5864" y1="10.5156" x2="43.4655" y2="10.6365" width="0.1524" layer="16"/>
+<wire x1="43.4655" y1="10.6365" x2="43.4655" y2="12.1655875" width="0.1524" layer="16"/>
+<wire x1="43.5356" y1="12.6492" x2="37.2872" y2="12.6492" width="0.1524" layer="1"/>
+<wire x1="37.2872" y1="12.6492" x2="35.7632" y2="11.1252" width="0.1524" layer="1"/>
+<wire x1="29.2608" y1="16.3068" x2="29.2608" y2="14.3256" width="0.1524" layer="1"/>
+<wire x1="29.2608" y1="14.3256" x2="30.988" y2="12.5984" width="0.1524" layer="1"/>
+<wire x1="31.8262" y1="11.7602" x2="30.988" y2="12.5984" width="0.1524" layer="1"/>
+<wire x1="33.1437" y1="11.1252" x2="32.5087" y2="11.7602" width="0.1524" layer="1"/>
+<wire x1="32.5087" y1="11.7602" x2="31.8262" y2="11.7602" width="0.1524" layer="1"/>
+<wire x1="35.7632" y1="11.1252" x2="33.1437" y2="11.1252" width="0.1524" layer="1"/>
+<wire x1="30.7655" y1="12.1655875" x2="30.7655" y2="10.6544125" width="0.1524" layer="16"/>
+<wire x1="30.988" y1="12.5984" x2="30.988" y2="12.3880875" width="0.1524" layer="16"/>
+<wire x1="30.7655" y1="10.6544125" x2="30.7848" y2="10.6351125" width="0.1524" layer="16"/>
+<wire x1="30.7848" y1="10.6351125" x2="30.7848" y2="10.5156" width="0.1524" layer="16"/>
+<wire x1="30.988" y1="12.3880875" x2="30.7655" y2="12.1655875" width="0.1524" layer="16"/>
 </signal>
 <signal name="E">
 <contactref element="E" pad="1"/>
@@ -832,9 +844,9 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
 <wire x1="21.6408" y1="7.4676" x2="21.6408" y2="7.7724" width="0.1524" layer="16"/>
 <wire x1="20.2692" y1="6.096" x2="21.6408" y2="7.4676" width="0.1524" layer="16"/>
 <wire x1="18.7452" y1="9.906" x2="18.69" y2="9.91" width="0.1524" layer="16"/>
-<wire x1="45.5676" y1="11.2776" x2="45.5676" y2="9.906" width="0.1524" layer="1"/>
-<wire x1="40.0812" y1="16.764" x2="45.5676" y2="11.2776" width="0.1524" layer="1"/>
-<wire x1="33.528" y1="16.764" x2="40.0812" y2="16.764" width="0.1524" layer="1"/>
+<wire x1="45.5676" y1="13.0556" x2="45.5676" y2="9.906" width="0.1524" layer="1"/>
+<wire x1="41.8592" y1="16.764" x2="45.5676" y2="13.0556" width="0.1524" layer="1"/>
+<wire x1="33.528" y1="16.764" x2="41.8592" y2="16.764" width="0.1524" layer="1"/>
 <wire x1="32.4612" y1="17.8308" x2="33.528" y2="16.764" width="0.1524" layer="1"/>
 <wire x1="32.4612" y1="18.1356" x2="32.4612" y2="17.8308" width="0.1524" layer="1"/>
 <wire x1="31.3944" y1="19.2024" x2="32.4612" y2="18.1356" width="0.1524" layer="1"/>
@@ -1205,11 +1217,17 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
 <signal name="N$18">
 <contactref element="LED2" pad="15"/>
 <contactref element="R3" pad="15"/>
-<wire x1="30.0228" y1="11.43" x2="29.718" y2="11.43" width="0.1524" layer="16"/>
-<wire x1="33.8328" y1="15.24" x2="30.0228" y2="11.43" width="0.1524" layer="16"/>
+<wire x1="30.0228" y1="11.43" x2="29.972" y2="11.43" width="0.1524" layer="16"/>
+<wire x1="29.972" y1="11.43" x2="29.718" y2="11.43" width="0.1524" layer="16"/>
 <wire x1="33.8328" y1="17.6784" x2="33.8328" y2="15.24" width="0.1524" layer="16"/>
 <wire x1="29.718" y1="11.43" x2="29.57" y2="11.41" width="0.1524" layer="16"/>
 <wire x1="33.8328" y1="17.6784" x2="33.936" y2="17.78" width="0.1524" layer="16"/>
+<wire x1="33.8328" y1="15.24" x2="32.0548" y2="13.462" width="0.1524" layer="16"/>
+<wire x1="32.0548" y1="13.462" x2="30.734" y2="13.462" width="0.1524" layer="16"/>
+<wire x1="29.972" y1="11.4319125" x2="29.972" y2="11.43" width="0.1524" layer="16"/>
+<wire x1="30.1945" y1="11.6544125" x2="29.972" y2="11.4319125" width="0.1524" layer="16"/>
+<wire x1="30.734" y1="13.462" x2="30.1945" y2="12.9225" width="0.1524" layer="16"/>
+<wire x1="30.1945" y1="12.9225" x2="30.1945" y2="11.6544125" width="0.1524" layer="16"/>
 </signal>
 <signal name="N$19">
 <contactref element="LED2" pad="3"/>