diff options
author | DJ Lucas <dj@linuxfromscratch.org> | 2011-05-14 19:41:18 +0000 |
---|---|---|
committer | DJ Lucas <dj@linuxfromscratch.org> | 2011-05-14 19:41:18 +0000 |
commit | cb95d5f23b3c5b803f83a38f09d654bd9924f421 (patch) | |
tree | abd65023fedb4c995ad741b53c3b1606faba46a0 /bootscripts/contrib/lsb-v3/init.d/rc | |
parent | 03bf43c6eab6a31a2e43aa1bd48ff375f5e04173 (diff) |
Changed distribution directory structure.
git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@9530 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689
Diffstat (limited to 'bootscripts/contrib/lsb-v3/init.d/rc')
-rw-r--r-- | bootscripts/contrib/lsb-v3/init.d/rc | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/bootscripts/contrib/lsb-v3/init.d/rc b/bootscripts/contrib/lsb-v3/init.d/rc deleted file mode 100644 index 24e26ee07..000000000 --- a/bootscripts/contrib/lsb-v3/init.d/rc +++ /dev/null @@ -1,196 +0,0 @@ -#!/bin/sh -# Begin $RC_BASE/init.d/rc - -# Get the configuration file -# All changes are to occur in the config file -. /etc/sysconfig/rc - -# These 3 signals will not cause our script to exit -trap "" INT QUIT TSTP - -# Simple sanity check - rc only takes one argument -if [ "${#}" -ne 1 ]; then - echo "Usage: ${0} <runlevel>" >&2 - exit 1 -fi - -# Do not use the RUNLEVEL and PREVLEVEL variables provided by init so -# that they can be modified and alternate directories (S) can -# be used without affecting init -runlevel="${1}" -prevlevel="${PREVLEVEL}" - -# Just in case - some flavors of init don't set PREVLEVEL to 'N' -if [ "${prevlevel}" = "" ]; then - prevlevel="N" -fi - -# Mount a tmpfs to store boot accounting information -if [ "${runlevel}" = "S" -a "${TEMPFS_MOUNT}" != "" ]; then - mount -n -t tmpfs tmpfs "${TEMPFS_MOUNT}" -o mode=600 -fi - -# Provide an interactive prompt (if requested) -if [ "${runlevel}" = "S" -a "${iprompt}" = "yes" ]; then - # ash does not accept t and n flags for read - ls -l /bin/sh | grep "/ash" - if [ "${?}" -eq "0" ]; then - # We are using ash - echo -e -n "${WARNING}WARNING: Either bash or zsh is required" - echo -e "${WARNING} for interactive startup.\n" - sleep 3 - else - echo "" - # dcol and icol are spaces before the message to center the - # message on screen. - dcol=$(( $(( ${COLUMNS} - ${dlen} )) / 2 )) - icol=$(( $(( ${COLUMNS} - ${ilen} )) / 2 )) - echo -e "\\033[${dcol}G${welcome_message}" - echo -e "\\033[${icol}G${i_message}${NORMAL}" - echo "" - read -t "${itime}" -n 1 interactive 2>&1 > /dev/null - if [ "${interactive}" = "I" -o "${interactive}" = "i" ]; then - echo -n -e "${CURS_UP}" - echo -e "${INFO}Interactive boot selected...${NORMAL}" - echo "interactive=I" > "${TEMPFS_MOUNT}/.interactive-start" - fi - fi -fi - - -# Verify that the directory exists -if [ ! -d "${RC_BASE}/rc${runlevel}.d" ]; then - echo -n -e "${WARNING}${RC_BASE}/rc${runlevel}.d does not exist." - echo -e "${NORMAL}" - exit 1 -fi - -# Source the interactive state file if it exists -if [ "${runlevel}" != "S" -a -f "${TEMPFS_MOUNT}/.interactive-start" ]; then - . "${TEMPFS_MOUNT}/.interactive-start" -fi - -# Prompt for interactive startup after completing S -if [ "${interactive}" = "I" -a "${runlevel}" != "S" -a \ - "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then - echo -n -e "Proceed with interactive starup of runlevel " - echo -n -e "${INFO}${runlevel}${NORMAL}?" - echo -n -e "(${FAILURE}y${NORMAL})es/(${FAILURE}n${NORMAL})o " - read -n 1 go_on - echo "" - if [ "${go_on}" = "n" ]; then - # don't continue - exit 0 - fi -fi - - -# Attempt to stop all services started in the previous runlevel, -# that are stopped in this runlevel -if [ "${prevlevel}" != "N" ]; then - for link in $(ls -v ${RC_BASE}/rc${runlevel}.d/K* 2> /dev/null) - do - # Check to see if link is a valid symlink - if [ ! -f ${link} ]; then - echo -e "${WARNING}${link} is not a valid symlink." - continue # go on to the next K* link - fi - - # Check to see if link is executable - if [ ! -x ${link} ]; then - echo -e "${WARNING}${link} is not executable, skipping." - continue # go on to the next K* link - fi - - script=${link#$RC_BASE/rc$runlevel.d/K[0-9][0-9]} - prev_start=$RC_BASE/rc$prevlevel.d/S[0-9][0-9]$script - S_start=$RC_BASE/rcS.d/S[0-9][0-9]$script - - if [ "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then - if [ ! -f ${prev_start} ] && [ ! -f ${S_start} ]; then - echo -e -n "${WARNING}WARNING:\n\n${link} can't be" - echo -e "${WARNING} executed because it was not" - echo -e -n "${WARNING} not started in the previous" - echo -e "${WARNING} runlevel (${prevlevel})." - echo -e "${NORMAL}" - continue - fi - fi - ${link} stop - error_value=${?} - - if [ "${error_value}" -ne "0" ]; then - print_error_msg - fi - done -fi - -# Start all functions in this runlevel if they weren't started in -# the previous runlevel -for link in $(ls -v ${RC_BASE}/rc${runlevel}.d/S* 2> /dev/null) -do - if [ "${prevlevel}" != "N" ]; then - script=${link#$RC_BASE/rc$runlevel.d/S[0-9][0-9]} - stop=$RC_BASE/rc$runlevel.d/K[0-9][0-9]$script - prev_start=$RC_BASE/rc$prevlevel.d/S[0-9][0-9]$script - - [ -f ${prev_start} ] && [ ! -f ${stop} ] && continue - fi - - # Check to see if link is a valid symlink - if [ ! -f ${link} ]; then - echo -e "${WARNING}${link} is not a valid symlink." - continue # go on to the next K* link - fi - - # Check to see if link is executable - if [ ! -x ${link} ]; then - echo -e "${WARNING}${link} is not executable, skipping." - continue # go on to the next K* link - fi - - case ${runlevel} in - 0|6) - ${link} stop - ;; - - *) - if [ "${interactive}" = "I" -o "${interactive}" = "i" ]; then - echo -e -n "${WARNING}Start ${INFO}${link} ${WARNING}?" - echo -e -n "${NORMAL}(${FAILURE}y${NORMAL})es/(${FAILURE}n${NORMAL})o " - read -n 1 startit 2>&1 > /dev/null - echo "" - if [ "${startit}" = "y" -o "${startit}" = "Y" ]; then - ${link} start - else - echo -e -n "${WARNING}Not starting ${INFO}${link}" - echo -e "${WARNING}.${NORMAL}\n" - fi - else - ${link} start - fi - ;; - esac - error_value=${?} - - if [ "${error_value}" -gt "1" ]; then - print_error_msg - fi -done - -# Strip apply time to the logs, strip out any color codes and dump -# the log to /var/log/boot.log -if [ -f "${TEMPFS_MOUNT}/.bootlog" -a "${runlevel}" != "S" ]; then - # Remove any color codes from the temp log file - sed -i 's@\\033\[[0-9];[0-9][0-9]m@@g' "${TEMPFS_MOUNT}/.bootlog" - #Fix the time and hostname - BTIMESPEC=$(echo `date +"%b %d %T"` `hostname`) - sed -i "s@^bootlog:@${BTIMESPEC} bootlog:@" "${TEMPFS_MOUNT}/.bootlog" - # Don't try and write in 0 and 6, this is a 'boot' log - if [ "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then - cat "${TEMPFS_MOUNT}/.bootlog" >> /var/log/boot.log - rm -f "${TEMPFS_MOUNT}/.bootlog" - fi -fi - -# End $RC_BASE/init.d/rc |