diff options
| author | Bruce Dubbs <bdubbs@linuxfromscratch.org> | 2008-06-03 21:51:14 +0000 |
|---|---|---|
| committer | Bruce Dubbs <bdubbs@linuxfromscratch.org> | 2008-06-03 21:51:14 +0000 |
| commit | 1c4800743d22d675ccfa48364d8aa558e8b7407c (patch) | |
| tree | ca4254cbe5dd5adb0ed8af1f87c26bc569403164 /bootscripts | |
| parent | 9faa3e27afb932894ace74854fbb76631022446b (diff) | |
Moved bootscripts and udev-config to BOOK
Updated Makefile to automatically generate bootscript and udev-config tarballs
Updated licesnse to be the same as BLFS
git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@8548 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689
Diffstat (limited to 'bootscripts')
70 files changed, 7429 insertions, 0 deletions
diff --git a/bootscripts/ChangeLog b/bootscripts/ChangeLog new file mode 100644 index 000000000..32e06a8b4 --- /dev/null +++ b/bootscripts/ChangeLog @@ -0,0 +1,927 @@ +2008-05-21 Bryan Kadzban <bryan@linuxfromscratch.org> + * lfs/init.d/udev, lfs/init.d/udev_retry: Use new udevadm program. + +2007-08-20 DJ Lucas <dj@linuxfromscratch.org> + * lfs/init.d/setclock: Added missing 'stop' argument to usage text + +2007-08-13 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/checkfs: Don't suppress error messages from the screen. + +2007-07-18 Dan Nicholson <dnicholson@linuxfromscratch.org> + * Makefile, lfs/init.d/consolelog: New bootscript controlling the + kernel log level on the console. This is controlled by the LOGLEVEL + variable in /etc/sysconfig/console. + * lfs/init.d/modules: Remove the log level handling since this is + done in the consolelog script now. + * lfs/init.d/modules: Clean up the script by removing the file + descriptor duplication and instead just redirecting + /etc/sysconfig/modules to the input of the while loop. + +2007-06-16 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/mountfs, lfs/init.d/mountkernfs, lfs/init.d/setclock, + lfs/init.d/modules, lfs/sysconfig/network-devices/if{up,down}: + Don't suppress stderr during bootscripts unless necessary. This + would prevent potentially critical messages from reaching the screen. + +2007-04-24 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: When killproc is executed, it checks that + the process is still running, sleeps if it is, then checks again. + The sleep is 1 second in between checks. By sleeping for 0.1 seconds + in between checks, killproc is much faster as it's wasting much + less time sleeping in the normal case that the process has died + after a short delay. + +2007-04-16 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: Redirect stderr when using kill to suppress + output. + * lfs/init.d/functions: killproc() was not handling the case where a + pidfile is passed to the function. The logic with the signal to be + used was causing issues with the handling of pidfiles. This has been + fixes, and now killproc() will recheck the process if the signal + was TERM (the default) or KILL. + * lfs/init.d/functions: statusproc() has been changed to use pidofproc() + instead of the deprecated getpids(). Additionally, it now accepts + the -p argument to specify a pidfile. + * lfs/init.d/functions: Currently, statusproc() always returns + successfully, and the only way to know if the process is running + is to parse the output. This changes statusproc() to return the + status of pidofproc(), which will return unsuccessfully if the + requested process is not running. + * lfs/init.d/functions: Changed reloadproc() to use pidofproc() and + respect the -p argument for pidfiles. + * lfs/init.d/sysklogd: Remove a useless argument to reloadproc(). + +2007-03-13 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: If pidofproc() is passed the -p argument + it can bomb testing a null variable with an integer expression. + +2007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/mountfs, lfs/init.d/console, lfs/init.d/setclock, + lfs/init.d/mountkernfs: &> redirection is not supported in POSIX. + Fortunately, it's equivalent to >word 2>&1 according to bash(1). + +2007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/console: POSIX says that shells only need to trap on + signals. Trapping on ERR isn't always supported. Conditionals have + been added to set the $failed variable in spots that seemed + appropriate for checking errors. + +2007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: Use arithmetic expansion and string length, + which are both mandated by POSIX, rather than spawning two processes + every time boot_mesg() is called. + +2007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org> + * lfs/init.d/functions: In order to provide an `echo' which provides + handles the -e and -n options for all POSIX shells, a feature test + is added which stores its result in $ECHO. /bin/echo will be used + if the default echo is not capable. Changed the existing functions + to reference $ECHO when needed. + * lfs/init.d/console: Use $ECHO when -en is needed. + +2007-02-03 Bryan Kadzban <bryan@linuxfromscratch.org> + * ChangeLog: Rename from CHANGELOG, start using GNU style entries. + + * Makefile: Move setclock before checkfs. Fixes #1948. + +2006-11-25 Bryan Kadzban <bryan@linuxfromscratch.org> + * lfs/init.d/udev_retry: Copy Debian's "copy generated rules" initscript + code, to clean up when the rule_generator scripts run before / is + writable. (Since the rule_generator code is from Debian, I assume their + cleanup code is appropriate.) + +2006-10-15 Bryan Kadzban <bryan@linuxfromscratch.org> + * lfs/init.d/udev_retry: Fix to work with udev >= 099. + +n/a - June 2, 2006 + * Removed console config file and makefile targets. + * Removed references to /dev/bug and bugreport in udevand + udev_retry bootscripts. (DJ Lucas) +n/a - April 17, 2006 + * Updated udev script to use the new udevsettle program. + * Added udev_retry script for systems that have /usr on a different + partition or for some other reason fail the initial replay. (Archaic) + +n/a - April 15, 2006 + * Cleaned up contrib directory. Removed: contrib/init.d, + contrib/enhanced, contrib/livecd, contrib/hotplug, and raq2 + patch. (DJ Lucas) + +n/a - April 14, 2006 + * Merged changes from udev_update branch (DJ Lucas) + * Replaced a return with an exit and reversed comment changes in + udev bootscript. (Dan Nicholson) + * Replaced walk_sysfs function in udev bootscript with new udevtrigger + program and move wait_for_uevents function inline. (DJ Lucas) + * Removed extra evaluate_retval in udev bootscript. (Ken Moffat) + * Wait for uevents to be processed in the udev script. See ticket #1720 + for details. (Matthew Burgess) + +n/a - March 21, 2006 + * Removed old references to boot_log function and arguments passed + to boot_mesg_flush in echo_* functions. (DJ Lucas) + +n/a - March 10, 2006 + * Moved src argument to ipv4-static-route service script and + removed from ipv4-static service script. (DJ Lucas) + +n/a - March 8. 2006 + * Correct sourced path in checkfs script. (Matthew Burgess) + +n/a - December 31, 2005 + * Replaced /etc/rc.d with ${rc_base} in checkfs. (Vincent Fretin) + +n/a - December 24, 2005 + * Added UTF-8 support to console script. (Alexander E. Patrakov) + +n/a - September 11, 2005 + * Removed text wraping and boot logging. + * Changed killproc to use warning if not running + * Changed 'print_status warning' to use old style output + * Fixed display error with LSB init-functions script + * Made above killproc/print_status changes in enhanced + bootscripts. + * Made logger service configurable in enhanced + bootscripts. (DJ Lucas) + +n/a - August 14, 2005 + * Added -s flag to pidofproc() for backwards + compatibility (DJ Lucas) + * Fixed erronous values returned by pidofproc() which + broke the functionality of statusproc (DJ Lucas) + +n/a - July 1, 2005 + * Changed a == to a = in lfs/init.d/functions, in the boot_mesg + function for ash compliancy (Nathan Coulson) + +n/a - June 26, 2005 + * Removed consolelog script from contrib + * Updated interactive rc script in contrib and added + README.rc-Interactive, added install target to the + Makefile. (DJ Lucas) + +3.2.2 - May 29, 2005 + * Tagged as 3.2.2 (Nathan Coulson) + +n/a - May 26, 2005 + * Added minimal target for cross-lfs book (Jim Gifford) + * Fixed raq2 patch (Jim Gifford) + +3.2.1 - May 1, 2005 + * Tagged as 3.2.1 (Nathan Coulson) + +n/a - April 17, 2005 + * removed touch from hotplug bootscript (Matthew Burgess) + * moved commands around in localnet bootscript (Andrew Benton) + +3.2.0 - March 30, 2005 + * Changed from syslog-ng to sysklogd (Archaic) + * Temporairly changed loadproc to return 0 if the program is + already running (Nathan Coulson) + * Fixed (by reverting) ifup/ifdown/network (Nathan Coulson), + Reported by Jim Gifford + * Fixed network up/down along with adding support of ONHOTPLUG + * Tagged as 3.2.0 + +n/a - March 19, 2005 + * Updated RaQ2 patch (Jim Gifford) + * Added net.agent for Hotplug of Network adapters in contrib + (Jim Gifford) + +n/a - March 16, 2005 + * Reverted the change from loadproc to start_daemon, + Moved compatibility code into one single function. + (Nathan Coulson) + * Readded the ONHOTPLUG option for ifup/ifdown (Nathan Coulson) + * Fixed killproc's output + +n/a - March 01, 2005 + * Added CHECK_LINK variable in ifconfig.*/*, so if the + interface does not exist, it will not fail. + (Nathan Coulson) + +n/a - February 19, 2005 + * Added evaluate_retval to the end of loadproc and killproc. + lsb does not say that killproc should print [ OK ], + but required for compatibility. (Nathan Coulson) + +n/a - February 9, 2005 + * Accidently mounted /dev with 775 instead of 755, fixed + (Reported by Alexander E. Patrakov) + +n/a - February 9, 2005 + * Bugfix for /dev, now mounted with 755 permission + +n/a - February 8, 2005 + * changed pidof, so it doesnt check the process id + of running bootscripts, and to process shell scripts + (Nathan Coulson) + +n/a - February 6, 2005 + * Updated main functions file with lsb functions file + Should now be LSB compliant (Nathan Coulson) + +n/a - January 10, 2005 + * Moved ONBOOT check back to network (Nathan Coulson) + * Removed ONHOTPLUG check (Nathan Coulson) + +n/a - January 6, 2005 + * fixed mountkernfs output (Nathan Coulson) + * reverted mountfs fakemounting (Nathan Coulson) + +n/a - January 5, 2005 + * Attempted to simplify network bootup files (Nathan Coulson) + * Modified mountkernfs to use mountpoint (Nathan Coulson) + * Assuming sysfs is always mounted (Nathan Coulson) + * Moved fakemount to below mounting (Nathan Coulson) + * Removed -t noramfs from umount, as we now use tmpfs (Nathan Coulson) + * moved sysctl from mountkernfs to sysctl (Nathan Coulson) + * Added -q to sysctl (Nathan Coulson) + +n/a - January 2, 2005 + * Fixed statusproc output. (DJ Lucas) + +3.1.0 - December 31, 2004 + * fixed textoutput + * Tagged as 3.1.0 + +n/a - December 30, 2004 + * Fixed name of LSB Functions file + * Changed boot_mesg to act like echo instead of echo -n, boot_mesg now + takes the -n argument if you do not wish to goto the next line + +3.0.1 - December 25, 2004 + * Released as 3.0.1 + +n/a - December 20, 2004 + * Cleaned up header. + * Added RaQ2 Patch + +n/a - December 16, 2004 + * Fixed a text typo in udev, tmpfs instead of ramfs (Steve Crosby) + +n/a - December 14, 2004 + * Fixed a warning with find in cleanfs + + +3.0 - December 8, 2004 + +n/a - December 5, 2004 + * Moved bootlog to use local2 service to avoide conflict with + dhcpcd (DJ Lucas) + +3.0-rc1 - December 1, 2004 + * rc-Interactive added (DJ Lucas) + * rc-Interactive moved to contrib (Nathan Coulson) + +n/a - November 27, 2004 + * Moved bootlog to use local1 to avoid conflict with ppd (DJ Lucas) + +n/a - November 25, 2004 + * Added consolelog to contrib/sysconfig (DJ Lucas) + * Rewrite of line wraping in boot_mesg and various fixes + related to boot_mesg changes (DJ Lucas, Alexander Patrakov) + * syslog-ng is now installed by default (Jeremy Utley) + * hotplug is now installed by default (Jeremy Utley) + * udev now uses /sbin/hotplug as the default hotplug handler (Nathan Coulson) + * udev now mounts a tmpfs instead of a ramfs onto /dev, + as suggested by Greg K-H (Nathan Coulson) + * Created contrib/lsb, and added a LSB compliant functions file + (Nathan Coulson, and Alexander Patrakov) + * Modified find [requires find 4.2.3+] (Matthew Burgess) + +n/a - November 20, 2004 + * Modifed modules script to return to previous kernel message + level (DJ Lucas) + +n/a - November 02, 2004 + * Added sysctl -p to mountkernfs (Matthew Burgess, DJ Lucas) + +n/a - October 07, 2004 + * statusproc modified not to send data to bootlog (Nathan Coulson) + * Fixed halt commands in checkfs and udev (James Robertson) + +n/a - October 04, 2004 + * Fixes to commit on 2004/09/30 (James Robertson) + * Revert a few changes until later (Nathan Coulson) + * Added a warning about switching from a 8bit font + to a 9bit font (Alexander Patrakov) + +n/a - September 30, 2004 + * Finished off boot_mesg() (James Robertson) + * Standardized all scripts to same variable format and other + internal sh/bash function calls (James Robertson) + * Fully implemented boot_mesg across all scripts in sysconfig + and init.d (James Robertson) + +n/a - September 26, 2004 + * Added BOOTMESG_PREFIX variable, so users can optionally set a + prefix for boot messages (James Robertson) + * Fixed localnet status, to use ip instead of ifconfig (Jim Gifford) + * Added consolelog to contrib (DJ Lucas) + * loadproc and killproc can have the -nomsg parameter to avoid + calling evaluate_retval or print_status (Jim Gifford) + * boot_mesg no longer explicitly adds a \n onto end of lines + * Added a function called boot_mesg_flush, which can + dump the BOOTMESG to the bootlog. This helps avoid making + everything have to end in OK/WARN/FAIL (Nathan Coulson) + +n/a - September 24, 2004 + * Removed /dev/udev.tdb test + +n/a - September 23, 2004 + * Fixed boot_log so it output's $@'s contents, not @$ + * Added support for colors in boot_mesg (James Robertson) + * Modified udev's error checking + * Modified hotplug's error checking + * Converted checkfs's error handling to use boot_mesg with + color support + * Added $INFO color to functions (James Robertson) + +n/a - September 22, 2004 + * Removed the dependency on wl by replacing it with grep (Bryan Kadzban) + * Fixed getpids, to remove unused pids obtained from $PIDFILE + * Removed ${NORMAL} from echo "$BOOTMESG" in functions, and removed + space added to each additional sentence tacked onto BOOTMESG + * boot_mesg now handles \n's properly, and does not dimish the size of + the next line (James Robertson) + * boot_log has been added. The echo_ functions commit the log, + and then clear the BOOTMSG variable + * All scriptes have been converted to use boot_mesg + +n/a - September 21, 2004 + * boot_mesg has been enhanced. Subsequent calls will overwrite previous + text, and it will wrap text basedupon the variable ${WCOL}. + (James Robertson) + * Fixed mtu optional service typo (Kevin P Fleming) + * Added SOURCE variable to ipv4-static-route (Kevin P Fleming) + +n/a - September 16, 2004 + * nework interfaces are now brought down in reverse order + +n/a - September 15, 2004 + * Added blue bracket, from dj's 3.0-pre1 bootscript package + [echo_failure, echo_warning, and echo_ok] + * Added a new function called boot_mesg, meant to replace the echo + command. + This will give us the posibility of doing logging at a later date + * Do not set COLUMNS if COLUMNS is already set + * Modified getpids, loadproc, killproc, reloadproc, and statusproc as + done by DJ + +2.2.3 - September 04, 2004 + * Tagged as 2.2.3 + +n/a - September 04, 2004 + * Added new script to contrib for syslog-ng, which is now part of + LFS-Unstable, and a new Makefile target install-syslog-ng which + removes the sysklogd links, and replaces them with syslog-ng (JU) + +2.2.2 - August 11, 2004 + * Tagged as 2.2.2 + +n/a - August 7, 2004 + * Added missing error redirect (/dev/null) in getpids. (DJ) + +n/a - August 4, 2004 + * Added MODE, DIRMODE, and CONFMODE variables to the makefile + to allow permissions to be set at install. (DJ) + +n/a - July 31, 2004 + + * Moved PIDFILE check to getpids and removed arguments from + killproc and reloadproc. Signals are now set at begining of + funtcions script with KILLDELAY. (DJ) + * Added a optional service script which can set the MTU for a given + interface + +n/a - July 21, 2004 + + * Committed DJ Lucas's patch for the killproc function. It no + longer requires arguments if PIDFILE is set + * added --backup to all sysconfig configuration files, so they are not + replaced on a make install + +n/a - July 13, 2004 + + * Added the PEER variable to the ifconfig.*/* file, done by + Kevin P. Fleming + +2.2.1 - July 12, 2004 + + * Tagged as 2.2.1 + +n/a - July 12, 2004 + + * Hotplug was moved from rcsysinit.d to rc{1,2,3,4,5} to help bring + up/down network interfaces started by hotplug. This has been revoked + at this time + * Networking interfaces are now brought down in reverse order + * Moved the ONBOOT check to within ifup/ifdown, so we can bring up/down + the interfaces at boottime/shutdown properly, done by Kevin P. Fleming + * Use PREFIX instead of NETMASK for adding addresses in ipv4-static, + done by Kevin P. Fleming + * Fix reversal of services inside ifconfig.* directories in ifdown, + done by Kevin P. Fleming + * Add ipv4-static-route service, supplied by Kevin P. Fleming + +2.2.0 - July 12, 2004 + + * Tagged as 2.2.0 + +n/a - July 11, 2004 + + * Minor script output changes + * Repaired networking scripts broken in previous commits + +n/a - July 10, 2004 + + * We now use the ip program [from iproute2] instead of ipconfig + [net-tools] to bring up/down ethernet interfaces, and local + connections, submitted by Jim Gifford + * Removed gateway backward compatibility + * Removed ifup-eth0 ifdown-eth0 compatibility + * Removed the "assume SERVICE=static if SERVICE is unset" compatibility + * Pass the IFCONFIG environmental variable to services, so they can + locate the file with the parameters they must read + * Rename static to ipv4-static + * Stage1 for network configuration via directories, ifup and ifdown + modified, and the static service modified + * Stage2 for network configuration via directories complete, network was + modified to check within subdirectories for ONBOOT=yes. Final Stage + +n/a - July 8, 2004 + + * Changed iso01 to lat1 everywhere in /etc/sysconfig/console. This + fixes the problem with line-drawing characters. + +n/a - July 7, 2004 + + * Halted the computer, if unable to mount /dev as a ramfs + +n/a - July 6, 2004 + + * Moved the hotplug bootscript back to contrib, it will not be used in + the testing branch of the lfs book at this time + +n/a - July 4, 2004 + + * Modified ifup and ifdown to be hotplug aware + +n/a - July 3, 2004 + + * Change the check for ONBOOT into a source within a subshell + +n/a - July 1, 2004 + + * Moved hotplug start to runlevels 3-5 from sysinit + +n/a - June 30, 2004 + + * Pass -depth in cleanfs + +n/a - June 29, 2004 + + * Made the grep for ONBOOT in the network script more exact + +2.1.2 - June 27, 2004 + + * Install the automatic module loading script by default + * Tagged as 2.1.2 + +n/a - June 26, 2004 + + * Fixed font for UK in /etc/sysconfig/console + +n/a - June 23, 2004 + + * Fixed a typo in the hotplug installation procedure + +n/a - June 21, 2004 + + * Re-ordered the "mount" and "echo" commands in the udev script, to + prevent a possible race + * Converted the udev script to use udevsend/udevd + * Moved removal of /fastboot and /forcefsck to just after the root fs + becomes writable, and dropped the removal of /etc/nologin + * Cleaned and tweaked both the output and actions of cleanfs + * Removed the disabling of hotplug from sendsignals + * Removed anything that might call "rmmod" in hotplug, since rmmod is + notoriously troublesome in the 2.6.x kernels, and call it with the + stop argument from runlevels 0 and 6 + * Fixed previous modifications to the udev and cleanfs scripts + +n/a - June 20, 2004 + + * Rolled back to the /dev/.udev.tdb check from 2.1.1, since the new + one doesn't work as well, and the bug that caused it to change is + now fixed + +n/a - June 18, 2004 + + * Updated sysconfig/console + * Fixed disabling hotplug in sendsignals + * hotplug is now installed by default + +n/a - June 15, 2004 + + * Reset /proc/sys/kernel/hotplug to /bin/true when running the "stop" + command for hotplug + * Cleaned the output of the mountkernfs script + * Don't output "Creating files and directories" when it's a lie + +n/a - June 8, 2004 + + * Changed the location the optional module script is installed to + /etc/rc.d/rcsysinit.d/S05modules. + +n/a - June 4, 2004 + + * Added a echo to the > /proc/sys/kernel/hotplug line, as > did not + clear it + +n/a - June 3, 2004 + + * Added '> /proc/sys/kernel/hotplug' to sendsignals, to disable hotplug + events, which may start up new daemons + * Added elementry bootup logging support. If it can write to + /var/log/boot.log, it will + * Removed logging support, it kept / from being remounted ro + +n/a - June 2, 2004 + + * Reorganize what goes on in the udev script + * Reorganize what goes on in the hotplug script + * Moved setting /sbin/hotplug as the default hotplug manager into the + hotplug script + +n/a - June 1, 2004 + + * Removed usbfs from mountkernfs, and mountfs + * Edited the udev script, so it'll always set /proc/sys/kernel/hotplug + +n/a - May 24, 2004 + + * Added more example keymaps and font settings to /etc/sysconfig/console + * Install the /etc/sysconfig/console file by default + +n/a - May 23, 2004 + + * Changed the symlink for the optional modules script + * Removed depmod from the optional modules script + +n/a - May 20, 2004 + + * Removed the random script. There is not a strong enough case for + adding it to the lfs-bootscripts. + +n/a - May 19, 2004 + + * Added the random bootscript from blfs-bootscripts + +2.1.1 - May 18, 2004 + + * Fixed installation of modules configuration + * Tagged as 2.1.1 + +n/a - May 16, 2004 + + * Added sysklogd configuration file + * Added example /etc/sysconfig/console file + * Do not attempt to populate /dev if that directory has already been + set up earlier in bootup (such as on initramfs/initrd) + * Prevent excessive kernel output once klogd starts + * Added hotplug script + +n/a - May 15, 2004 + + * Namespace rework (enumeration of scripts is now cleaner) + * Removed directories: blfs, contrib/new-boot-0.2, contrib/rlv + +n/a - May 13, 2004 + + * Repaired the console script + * Added a check to cleanfs [createfiles], to make sure that we have + a valid devicetype, if we have type=dev + +n/a - May 11, 2004 + + * Added usbfs to mountkernfs and mountfs + +n/a - May 6, 2004 + + * Don't use loadproc in localnet, it's not meant for that + * Quote tests of $PIDFILE, so that things behave when it's empty + * Removed unused kill -0 from killproc + +2.1.0 - May 4, 2004 + + * Update to the console script, prevent install of the console script + * Chgrp /var/run/utmp to group utmp if it exists. + * Moved udev from contrib to lfs + * Moved GATEWAY setup from /etc/rc.d/init.d/network to + /etc/sysconfig/network-devices/services/static + * Use the contents of $PIDFILE, if it is set in the script + * Tagged as 2.1.0. + +n/a - April 30, 2004 + + * Moved the loadkeys script to console, and added setfont. Contributed + by Alexander E. Patrakov + +2.0.5 - April 29, 2004 + + * Added the heimdal init script. + * Tagged as 2.0.5 + +2.0.4 - April 27, 2004 + + * Tagged as 2.0.4 + +n/a - April 24, 2004 + + * Added a example script for /etc/sysconfig/createfiles + * Added a check for /sys before mounting sysfs + * Added -t noramfs to umount on /etc/rc.d/init.d/mountfs. + This will prevent /dev from being unmounted, if /proc/mounts + is symlinked to /etc/mtab + +n/a - April 18, 2004 + + * Small fix to a if statement in netfs + +n/a - April 17, 2004 + + * Added the lisa bootscript, lisa is part of the KDE Network package + * Add proper error checking to the mountfs script when writing out mtab + * Add more comments to the udev script, and conditionalize various + things that should've been done this way in the first place + * Include a template module auto-loading configuration file instead of + having syntax comments in the script itself + +n/a - April 12, 2004 + + * Added a automatic modules loading script to the contrib directory + submitted by Zack + * Edited mountkernfs, so that if you can mount sysfs on /sys, it will + be mounted at boottime. Should not affect 2.4 systems + * Since all entries are added to /etc/mtab, we should not require + the NO_FS variable. It has been removed from mountfs + * Added the udev script into the contrib directory, submitted by Zack + +2.0.3 - April 8, 2004 + + * Updated cleanfs, so it can create devices. Supplied by Zack + * Tagged as 2.0.3 + +n/a - March 31, 2004 + + * Changed "Press Enter" on unknown error to white + * Moved S10swap to S20swap. When udev is added, it has to be + ran before swap is setup + +n/a - March 29, 2004 + + * Fixed the rc5.d symlink for ntp so it creates S26ntp instead + of S26npt + * Moved S20mountkernfs to S00mountkernfs in rcsysinit.d. Will help in + the addition of udev in the future. + +n/a - March 27, 2004 + + * Changed gdm path from hardcoded to program name. There are 2 spots + gnome can be installed + +n/a - March 26, 2004 + + * Updated fam daemon script. It now uses the famd daemon instead of fam + +n/a - March 24, 2004 + + * Removed mount command out of nfs. the netfs script already handles + this + +2.0.2 - March 24, 2004 + + * Edited cleanfs to solve a problem. [if /tmp does not exist, it + could run the find command on the root filesystem] + * Tagged as 2.0.2 + +2.0.1 - March 24, 2004 + + * Found typo in BLFS MySQL Script. + * Tagged as 2.0.1 + +2.0.0 - March 23, 2004 + + * Tagged as 2.0.0, no changes from 2.0.0-pre2 + +2.0.0-pre2 - March 23, 2004 + + * Cleaned the /tmp directory on bootup. find command supplied by Zack + * Added a script which can automatically create files and directories + on startup. [Handles files/directories, permissions, and user/group]. + Created by Zack + * Added blfs/init.d/fam script + * Tagged as 2.0.0-pre2 + +n/a - March 20, 2004 + + * Added create-service-dir target and removed from create-dirs + * Changed service script install targets to use + create-service-dir + * Added check for dhcpcd service script for stale pid file + Suggested by Jeremy + * Added ifconfig to ipx service script for hosting device not up + +n/a - March 19, 2004 + + * Added support for ETCDIR, and DESTDIR in the Makefile, + compliments of Tushar + * Renamed mountproc to mountkernfs + * Updated the README file + * Coloured the print_error_message in functions red + * added stop to the setclock script + * changed echo > to > in cleanfs, suggested by winkie + * BLFS Scripts Added, collected by Zack + * Edited killproc, so it checks for running pids, rather then + the completion of the above kill command. Suggested by Zack + * Added network services found in blfs, removed adsl. Submitted by + DJ. + +1.99.4 - March 17, 2004 + + * Fixed one last halt line in checkfs script + * Moved the directory structure around + * Tagged as development release 1.99.4 + +n/a - February 28, 2004 + + * Added stty sane to the top of rc.d/init.d/rc. Hopefully, this will + fix the problems + * Also changed all instances of <ctrl-j> back to enter + +1.99.3 - February 23, 2004 + + * Tagged as development release 1.99.3 + +n/a - February 19, 2004 + + * Fixed checkfs script, so it will no longer continue to boot after a + failure in the init.d/checkfs script. Tested with the help of Andre + Müller. Fix suggested by Zack + +n/a - February 7, 2004 + + * Added -s onto grep on network stop + * Replaced a few more enter's with ctrl-j + +1.99.2 - February 6, 2004 + + * Added -s onto grep in network start + * Tagged as development release 1.99.2 + +n/a - February 4, 2004 + + * Fixed $WARNING $NORMAL and $ERROR lines, broken by changes in + functions + * Changed above fixes to work with ash + * Fixed checkfs symlink in Makefile + * functions is no longer installed as executable + * Added a check to checkfs, for errors above 16. These are caused by + being unable to run fsck, either due to user input, or a unfunctional + linux system + +1.99.1 - February 2, 2004 + + * Tagged as development release 1.99.1 + +n/a - February 2, 2004: + + * Added -d to umount in mountfs. + * Fixed network shutdown script + * Fixed Makefile rc.6 to reboot + * Added -s flag to grep command in rc.d/init.d/network - + suppresses an error if no ifconfig.* files exist + +n/a - January 30, 2004: + + * Reorganized the network system to accept multiple services. + * Ash Compliancy + * Modified some scripts to follow template + * Reorganized functions, based upon Ash Compliancy Patch + * Added a sleep 5 to failure for evaulate_retval, and changed + evaulate_retval to return true instead of false. Instead, a + exit 1 will indicate the script terminated abnormally, causing + your system to wait until you hit ctrl-J + * Switched "Press enter to continue" to "Press <ctrl-j> to continue" + * replaced 3 with $KILLDELAY in sendsignals + * mountfs does not mount network filesystems [identified by _netdev + in /etc/fstab] + * removed unneded touch out of cleanfs + +n/a - January 30, 2004: + + * New maintainers for the lfs-bootscripts package are: + Jeremy Utley (jeremy@linuxfromscratch.org) + Nathan Coulson (nathan@linuxfromscratch.org) + +1.11 - February 3rd, 2003: + + * /etc/mtab is now a real file and is handled correctly so there are + no errors even when the machine has crashed. + +1.10 - September 12th, 2002: + + * Fixed up checkfs to work with non-ext2 filesystems too (such as + minix). + +1.9 - April 5th, 2002: + + * reloadproc function had a missing '=' in the "failure 1" command (it + should be failure=1) + + * When script exists with unexpected value, you have to hit "Enter" to + continue, not just a random key as printed on the screen. + + * Moved K10sysklogd, K20sendsignals, K30mount and K40swap to + K40sysklogd, K50sendsignals, K60mount, K70swap + + * Changed the #!/bin/sh lines to #!/bin/bash - /bin/sh may not be + linked to bash but to some other shell of your choice. These scripts + are written to work with bash, so you can't just run them when + /bin/sh -> csh or ash or whatever else tickles your fancy. This + change should fix that. + +1.8 - March 14th, 2002: + + * Fixed the getpids function call so PPID's would be taken into account + properly. + + * Added the 'contrib' directory with other people's bootscript + implementations. + +1.7 - March 10th, 2002: + + * Used code from Matthias Benkmann's simpleinit-msb @ + http://winterdrache.de/linux/newboot/index.html mainly for improved + killproc function handling + + * When a requested process isn't running, or is already running, a + warning "Not running" or "Already running" will be displayed. This + was out of allignment due to a missing $CURS_UP + + * Removed "||exit" from ifup and ifdown scripts. They are useless. + + * Changed the loadkeys script to run "loadkeys -d" and removed the need + for the /etc/sysconfig/keyboard file. The kbd patch fixes the + "loadkeys -d" behaviour. + +1.6 - February 26th, 2002: + + * replaced -o %PPID with -o $PPID throughout the functions script. This + construct does what it's supposed to do (don't take PPID into account + because this would fail if a running daemon and the bootscript have + the same name). + + * added 'restart' to the swap script + + * instead of using 'echo -n' to supress newlines so the [ OK ] and + related messages allign properly, substitute this with a single echo + command that simply goes one line up before outputting anything. This + also has the benefit that when programs have their own output (like + swapon, fsck and loadkeys), there won't be an unwanted blank line + between the program's output and the [ OK ] et all. messages. + +1.5 - February 2nd, 2002: + + * added 'exit 1' to the statusproc function when there aren't enough + parameters passed to it (such as the name of process to check for) + +1.4 - February 2nd, 2002: + + * when /fastboot is detected and the message about it is printed, + don't run 'exit 1' else the rc script will cause a [FAILED] to + be printed which is undesired in this case. + +1.3 - January 30th, 2002: + * network script: changed default route detection by using the same + method as used when starting the script: check if the GATEWAY + variable is set + + * removed the emptying of /etc/mtab since it's a symlink to + /proc/mounts now + + * added the mountproc script which mounts the proc system. This is done + because we need proc mounted even before the mountfs script is ran + (now that /etc/mtab is a symlink to /proc/mounts) + + * removed all absolute paths from command calls + + * added umask 022 and PATH="/bin:/usr/bin:/sbin:/usr/sbin" to the + functions script. Every file now sources this so that umask and PATH + are set correctly + +1.2 - January 26th, 2002: + * network script: detect if a default route is set before removing it + diff --git a/bootscripts/LICENSE b/bootscripts/LICENSE new file mode 100644 index 000000000..8beeec4bd --- /dev/null +++ b/bootscripts/LICENSE @@ -0,0 +1,29 @@ +Copyright (c) 1999-2002, Gerard Beekmans + +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + * Redistributions in any form must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Neither the name of "Linux From Scratch" nor the names of its + contributors may be used to endorse or promote products derived from + this material without specific prior written permission. + + * Any material derived from Linux From Scratch must contain a + reference to the "Linux From Scratch" project. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS +IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + diff --git a/bootscripts/Makefile b/bootscripts/Makefile new file mode 100644 index 000000000..4c6bcca10 --- /dev/null +++ b/bootscripts/Makefile @@ -0,0 +1,134 @@ +ETCDIR=/etc +EXTDIR=${DESTDIR}${ETCDIR} +MODE=754 +DIRMODE=755 +CONFMODE=644 + +all: install + +create-dirs: + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/rc0.d + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/rc1.d + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/rc2.d + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/rc3.d + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/rc4.d + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/rc5.d + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/rc6.d + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/rcsysinit.d + install -d -m ${DIRMODE} ${EXTDIR}/rc.d/init.d + install -d -m ${DIRMODE} ${EXTDIR}/sysconfig + +create-service-dir: + install -d -m ${DIRMODE} ${EXTDIR}/sysconfig/network-devices/services + +install: create-dirs create-service-dir + install -m ${MODE} lfs/init.d/checkfs ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/cleanfs ${EXTDIR}/rc.d/init.d/ + install -m ${CONFMODE} lfs/init.d/functions ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/halt ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/console ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/consolelog ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/localnet ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/modules ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/mountfs ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/mountkernfs ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/network ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/rc ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/reboot ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/sendsignals ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/setclock ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/sysklogd ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/swap ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/sysctl ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/template ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/udev ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/udev_retry ${EXTDIR}/rc.d/init.d/ + ln -sf ../init.d/network ${EXTDIR}/rc.d/rc0.d/K80network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc.d/rc0.d/K90sysklogd + ln -sf ../init.d/sendsignals ${EXTDIR}/rc.d/rc0.d/S60sendsignals + ln -sf ../init.d/mountfs ${EXTDIR}/rc.d/rc0.d/S70mountfs + ln -sf ../init.d/swap ${EXTDIR}/rc.d/rc0.d/S80swap + ln -sf ../init.d/localnet ${EXTDIR}/rc.d/rc0.d/S90localnet + ln -sf ../init.d/halt ${EXTDIR}/rc.d/rc0.d/S99halt + ln -sf ../init.d/network ${EXTDIR}/rc.d/rc1.d/K80network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc.d/rc1.d/K90sysklogd + ln -sf ../init.d/network ${EXTDIR}/rc.d/rc2.d/K80network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc.d/rc2.d/K90sysklogd + ln -sf ../init.d/sysklogd ${EXTDIR}/rc.d/rc3.d/S10sysklogd + ln -sf ../init.d/network ${EXTDIR}/rc.d/rc3.d/S20network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc.d/rc4.d/S10sysklogd + ln -sf ../init.d/network ${EXTDIR}/rc.d/rc4.d/S20network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc.d/rc5.d/S10sysklogd + ln -sf ../init.d/network ${EXTDIR}/rc.d/rc5.d/S20network + ln -sf ../init.d/network ${EXTDIR}/rc.d/rc6.d/K80network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc.d/rc6.d/K90sysklogd + ln -sf ../init.d/sendsignals ${EXTDIR}/rc.d/rc6.d/S60sendsignals + ln -sf ../init.d/mountfs ${EXTDIR}/rc.d/rc6.d/S70mountfs + ln -sf ../init.d/swap ${EXTDIR}/rc.d/rc6.d/S80swap + ln -sf ../init.d/localnet ${EXTDIR}/rc.d/rc6.d/S90localnet + ln -sf ../init.d/reboot ${EXTDIR}/rc.d/rc6.d/S99reboot + ln -sf ../init.d/mountkernfs ${EXTDIR}/rc.d/rcsysinit.d/S00mountkernfs + ln -sf ../init.d/consolelog ${EXTDIR}/rc.d/rcsysinit.d/S02consolelog + ln -sf ../init.d/modules ${EXTDIR}/rc.d/rcsysinit.d/S05modules + ln -sf ../init.d/udev ${EXTDIR}/rc.d/rcsysinit.d/S10udev + ln -sf ../init.d/swap ${EXTDIR}/rc.d/rcsysinit.d/S20swap + ln -sf ../init.d/setclock ${EXTDIR}/rc.d/rcsysinit.d/S25setclock + ln -sf ../init.d/checkfs ${EXTDIR}/rc.d/rcsysinit.d/S30checkfs + ln -sf ../init.d/mountfs ${EXTDIR}/rc.d/rcsysinit.d/S40mountfs + ln -sf ../init.d/udev_retry ${EXTDIR}/rc.d/rcsysinit.d/S45udev_retry + ln -sf ../init.d/cleanfs ${EXTDIR}/rc.d/rcsysinit.d/S50cleanfs + ln -sf ../init.d/console ${EXTDIR}/rc.d/rcsysinit.d/S70console + ln -sf ../init.d/localnet ${EXTDIR}/rc.d/rcsysinit.d/S80localnet + ln -sf ../init.d/sysctl ${EXTDIR}/rc.d/rcsysinit.d/S90sysctl + if [ ! -f ${EXTDIR}/sysconfig/createfiles ]; then install -m ${CONFMODE} lfs/sysconfig/createfiles ${EXTDIR}/sysconfig/; fi + if [ ! -f ${EXTDIR}/sysconfig/modules ]; then install -m ${CONFMODE} lfs/sysconfig/modules ${EXTDIR}/sysconfig/; fi + if [ ! -f ${EXTDIR}/sysconfig/rc ]; then install -m ${CONFMODE} lfs/sysconfig/rc ${EXTDIR}/sysconfig/; fi + install -m ${MODE} lfs/sysconfig/network-devices/ifup ${EXTDIR}/sysconfig/network-devices/ + install -m ${MODE} lfs/sysconfig/network-devices/ifdown ${EXTDIR}/sysconfig/network-devices/ + install -m ${MODE} lfs/sysconfig/network-devices/services/ipv4-static ${EXTDIR}/sysconfig/network-devices/services/ + install -m ${MODE} lfs/sysconfig/network-devices/services/ipv4-static-route ${EXTDIR}/sysconfig/network-devices/services/ + +install-consolelog: create-dirs + install -m ${MODE} contrib/init.d/consolelog ${EXTDIR}/rc.d/init.d + ln -sf ../init.d/consolelog ${EXTDIR}/rc.d/rcsysinit.d/S00consolelog + +install-lsb-compliant: + make -C contrib/lsb + +install-service-mtu: create-service-dir + install -m ${MODE} contrib/sysconfig/network-devices/services/mtu ${EXTDIR}/sysconfig/network-devices/services + +minimal: create-dirs create-service-dir + install -m ${MODE} lfs/init.d/checkfs ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/cleanfs ${EXTDIR}/rc.d/init.d/ + install -m ${CONFMODE} lfs/init.d/functions ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/halt ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/localnet ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/mountfs ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/mountkernfs ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/rc ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/reboot ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/sendsignals ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/setclock ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/swap ${EXTDIR}/rc.d/init.d/ + install -m ${MODE} lfs/init.d/udev ${EXTDIR}/rc.d/init.d/ + ln -sf ../init.d/sendsignals ${EXTDIR}/rc.d/rc0.d/S60sendsignals + ln -sf ../init.d/mountfs ${EXTDIR}/rc.d/rc0.d/S70mountfs + ln -sf ../init.d/swap ${EXTDIR}/rc.d/rc0.d/S80swap + ln -sf ../init.d/halt ${EXTDIR}/rc.d/rc0.d/S99halt + ln -sf ../init.d/sendsignals ${EXTDIR}/rc.d/rc6.d/S60sendsignals + ln -sf ../init.d/mountfs ${EXTDIR}/rc.d/rc6.d/S70mountfs + ln -sf ../init.d/swap ${EXTDIR}/rc.d/rc6.d/S80swap + ln -sf ../init.d/reboot ${EXTDIR}/rc.d/rc6.d/S99reboot + ln -sf ../init.d/mountkernfs ${EXTDIR}/rc.d/rcsysinit.d/S00mountkernfs + ln -sf ../init.d/udev ${EXTDIR}/rc.d/rcsysinit.d/S10udev + ln -sf ../init.d/swap ${EXTDIR}/rc.d/rcsysinit.d/S20swap + ln -sf ../init.d/setclock ${EXTDIR}/rc.d/rcsysinit.d/S25setclock + ln -sf ../init.d/checkfs ${EXTDIR}/rc.d/rcsysinit.d/S30checkfs + ln -sf ../init.d/mountfs ${EXTDIR}/rc.d/rcsysinit.d/S40mountfs + ln -sf ../init.d/cleanfs ${EXTDIR}/rc.d/rcsysinit.d/S50cleanfs + if [ ! -f ${EXTDIR}/sysconfig/rc ]; then install -m ${CONFMODE} lfs/sysconfig/rc ${EXTDIR}/sysconfig/; fi + +.PHONY: all create-dirs create-service-dir \ + install install-service-mtu + diff --git a/bootscripts/README b/bootscripts/README new file mode 100644 index 000000000..a2582bc82 --- /dev/null +++ b/bootscripts/README @@ -0,0 +1,79 @@ +Network Configuration: + Script Files: + rc.d/init.d/network + sysconfig/network-devices/ifup + sysconfig/network-devices/ifdown + sysconfig/network-devices/services/* + + Configuration Files: + sysconfig/network-devices/ifconfig.*/* + Note: ifconfig.* could be either a file or directory, + but the filename extention must be the same name + as the network interface you wish it to belong to. + The files within the directory will be processed + in alphanumerical order on boot, and reversed on + shutdown. + - SERVICE: which script to run in services directory. + - ONBOOT: if set to yes, this interface will be started on + bootup, and stopped on shutdown + - ONHOTPLUG: if set to yes, this interface will be started + and stopped on hotplug events. This requires + ifup and ifdown symlinked to /sbin, as well + as the hotplug package + + sysconfig/network + - HOSTNAME: Value of the system's hostname + + Additional Configuration: + sysconfig/network-devices/ifconfig.* + ipv4-static: + - IP: static IP Address + - GATEWAY: Specifies the IP Address of the gateway server + - PREFIX: CIDR prefix of IP Address, defaults to 24 if not set + - PEER: IP Address of peer (for point-to-point connections and tunnels) + - BROADCAST: broadcast address + ipv4-static-route: + - TYPE: network (default type if not specified), default, host or + unreachable + - IP: IP Address of target (for network, host and unreachable) + - PREFIX: CIDR prefix of target (for network, host and unreachable) + - GATEWAY: IP Address of gateway to reach target (for network and default) + + +SetClock configuration: + Script Files: + rc.d/init.d/setclock + + Configuration Files: + sysconfig/clock + - UTC: 1 assumes hwclock is in UTC + 0 assumes hwclock is in local time + +CleanFS configuration: + Script Files: + rc.d/init.d/cleanfs + + Configuration Files: + /etc/sysconfig/createfiles + Each line is parsed, using space as a deliminator. + [NAME] [TYPE] [PERMISSIONS] [USER] [GROUP] + The below fields are currently only used on dev type. + ([DEV TYPE] [MAJOR#] [MINOR#]) + Name: + File/Directory/Device name + Type: + dir: creates a directory + file: creates a file + dev: creates a device + Permissions: + chmod the created file + User/Group: + chown the created file/dir to this user/group + Dev Type: + char: character [needs MAJOR#, MINOR#] + block: block [needs MAJOR#, MINOR#] + pipe: pipe + Major#: + Used by character and block devices. + Minor#: + Used by character and block devices. diff --git a/bootscripts/contrib/lsb-v3/ChangeLog b/bootscripts/contrib/lsb-v3/ChangeLog new file mode 100644 index 000000000..c47832093 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/ChangeLog @@ -0,0 +1,26 @@ +ChangeLog + +20080531 - [dj] * Synced with LFS-Bootscrpts-20080531 (use udevadm) + * Added additional functions to manage_functions script. + +20080413 - [dj] * Added manage_functions script for use by scripts such as + {install,remove}_initd or chkconfig, that need to parse the + LSB headers. + * Cleaned up script headers to reflect real Start or Stop + +20080315 - [dj] * Corrected test for $pidfile in pidofproc() + * Replaced exit with return in statusproc() - (lfs-functions) + +20080315 - [dj] * Added missing 'stale pid file' checking for pidofproc() + +20080210 - [dj] * Updated documentation + +20070820 - [dj] * Synced with LFS-bootscripts + +20070705 - [dj] * Synced with LFS-bootscripts + * Removed 'stty' from the environment setup as it breaks + custom key configs when run from the CLI. + +20070218 - [dj] * Synced with LFS-bootscripts. + +20070206 - [dj] * Initial commit diff --git a/bootscripts/contrib/lsb-v3/INSTALL b/bootscripts/contrib/lsb-v3/INSTALL new file mode 100644 index 000000000..b7e0f109f --- /dev/null +++ b/bootscripts/contrib/lsb-v3/INSTALL @@ -0,0 +1,32 @@ +LSB-V3 Installation: + +Inline LFS installation: make install && + sed -i.bak 's@/etc/rc.d@/etc@' /etc/inittab + + +After LFS: for file in /etc/rc.d /etc/sysconfig/rc /etc/sysconfig/modules \ + /etc/sysconfig/createfiles + do + mv $file $file.bak + done && + make install && + sed -i.bak 's@/etc/rc.d@/etc@' /etc/inittab + + +With existing scripts: HERE=$PWD + cp -a /etc/rc.d /etc/rc.d.bak && + mv /etc/rc.d/* /etc && + cd /etc/rc.d && + ln -s ../rc*.d . && + ln -s ../init.d . && + for file in /etc/rc.d /etc/syconfig/rc \ + /etc/sysconfig/modules /etc/sysconfig/createfiles + do + mv $file $file.bak + done && + cd $HERE && + unset HERE && + make install && + sed -i.bak 's@/etc/rc.d@/etc/@' /etc/inittab + +That's it! diff --git a/bootscripts/contrib/lsb-v3/Makefile b/bootscripts/contrib/lsb-v3/Makefile new file mode 100644 index 000000000..6e117a9e3 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/Makefile @@ -0,0 +1,134 @@ +ETCDIR=/etc +EXTDIR=${DESTDIR}${ETCDIR} +MODE=754 +DIRMODE=755 +CONFMODE=644 + +all: install + +create-dirs: + install -d -m ${DIRMODE} ${EXTDIR}/rc0.d + install -d -m ${DIRMODE} ${EXTDIR}/rc1.d + install -d -m ${DIRMODE} ${EXTDIR}/rc2.d + install -d -m ${DIRMODE} ${EXTDIR}/rc3.d + install -d -m ${DIRMODE} ${EXTDIR}/rc4.d + install -d -m ${DIRMODE} ${EXTDIR}/rc5.d + install -d -m ${DIRMODE} ${EXTDIR}/rc6.d + install -d -m ${DIRMODE} ${EXTDIR}/rcsysinit.d + install -d -m ${DIRMODE} ${EXTDIR}/init.d + install -d -m ${DIRMODE} ${EXTDIR}/sysconfig + install -d -m ${DIRMODE} ${DESTDIR}/lib/lsb + install -d -m ${DIRMODE} ${EXTDIR}/lsb/state + +create-service-dir: + install -d -m ${DIRMODE} ${EXTDIR}/sysconfig/network-devices/services + +create-boottemp-dir: + install -d -m ${DIRMODE} ${EXTDIR}/init.d/boottemp + +install: create-dirs create-service-dir create-boottemp-dir + install -m ${MODE} init.d/checkfs ${EXTDIR}/init.d/ + install -m ${MODE} init.d/cleanfs ${EXTDIR}/init.d/ + install -m ${CONFMODE} init.d/lfs-functions ${EXTDIR}/init.d/ + install -m ${MODE} init.d/halt ${EXTDIR}/init.d/ + install -m ${MODE} init.d/console ${EXTDIR}/init.d/ + install -m ${MODE} init.d/localnet ${EXTDIR}/init.d/ + install -m ${MODE} init.d/modules ${EXTDIR}/init.d/ + install -m ${MODE} init.d/mountfs ${EXTDIR}/init.d/ + install -m ${MODE} init.d/mountkernfs ${EXTDIR}/init.d/ + install -m ${MODE} init.d/network ${EXTDIR}/init.d/ + install -m ${MODE} init.d/rc ${EXTDIR}/init.d/ + install -m ${MODE} init.d/reboot ${EXTDIR}/init.d/ + install -m ${MODE} init.d/sendsignals ${EXTDIR}/init.d/ + install -m ${MODE} init.d/setclock ${EXTDIR}/init.d/ + install -m ${MODE} init.d/sysklogd ${EXTDIR}/init.d/ + install -m ${MODE} init.d/swap ${EXTDIR}/init.d/ + install -m ${MODE} init.d/sysctl ${EXTDIR}/init.d/ + install -m ${MODE} init.d/template ${EXTDIR}/init.d/ + install -m ${MODE} init.d/udev ${EXTDIR}/init.d/ + install -m ${MODE} init.d/udev_retry ${EXTDIR}/init.d/ + install -m ${CONFMODE} lsb/init-functions ${DESTDIR}/lib/lsb/ + install -m ${CONFMODE} lsb/manage-functions ${DESTDIR}/lib/lsb/ + install -m ${CONFMODE} etc/lsb-config ${EXTDIR}/lsb/ + ln -sf ../init.d/network ${EXTDIR}/rc0.d/K80network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc0.d/K90sysklogd + ln -sf ../init.d/sendsignals ${EXTDIR}/rc0.d/S60sendsignals + ln -sf ../init.d/mountfs ${EXTDIR}/rc0.d/S70mountfs + ln -sf ../init.d/swap ${EXTDIR}/rc0.d/S80swap + ln -sf ../init.d/localnet ${EXTDIR}/rc0.d/S90localnet + ln -sf ../init.d/halt ${EXTDIR}/rc0.d/S99halt + ln -sf ../init.d/network ${EXTDIR}/rc1.d/K80network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc1.d/K90sysklogd + ln -sf ../init.d/network ${EXTDIR}/rc2.d/K80network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc2.d/K90sysklogd + ln -sf ../init.d/sysklogd ${EXTDIR}/rc3.d/S10sysklogd + ln -sf ../init.d/network ${EXTDIR}/rc3.d/S20network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc4.d/S10sysklogd + ln -sf ../init.d/network ${EXTDIR}/rc4.d/S20network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc5.d/S10sysklogd + ln -sf ../init.d/network ${EXTDIR}/rc5.d/S20network + ln -sf ../init.d/network ${EXTDIR}/rc6.d/K80network + ln -sf ../init.d/sysklogd ${EXTDIR}/rc6.d/K90sysklogd + ln -sf ../init.d/sendsignals ${EXTDIR}/rc6.d/S60sendsignals + ln -sf ../init.d/mountfs ${EXTDIR}/rc6.d/S70mountfs + ln -sf ../init.d/swap ${EXTDIR}/rc6.d/S80swap + ln -sf ../init.d/localnet ${EXTDIR}/rc6.d/S90localnet + ln -sf ../init.d/reboot ${EXTDIR}/rc6.d/S99reboot + ln -sf ../init.d/mountkernfs ${EXTDIR}/rcsysinit.d/S00mountkernfs + ln -sf ../init.d/sysctl ${EXTDIR}/rcsysinit.d/S05sysctl + ln -sf ../init.d/modules ${EXTDIR}/rcsysinit.d/S10modules + ln -sf ../init.d/udev ${EXTDIR}/rcsysinit.d/S15udev + ln -sf ../init.d/swap ${EXTDIR}/rcsysinit.d/S20swap + ln -sf ../init.d/setclock ${EXTDIR}/rcsysinit.d/S25setclock + ln -sf ../init.d/checkfs ${EXTDIR}/rcsysinit.d/S30checkfs + ln -sf ../init.d/mountfs ${EXTDIR}/rcsysinit.d/S40mountfs + ln -sf ../init.d/udev_retry ${EXTDIR}/rcsysinit.d/S45udev_retry + ln -sf ../init.d/cleanfs ${EXTDIR}/rcsysinit.d/S50cleanfs + ln -sf ../init.d/console ${EXTDIR}/rcsysinit.d/S70console + ln -sf ../init.d/localnet ${EXTDIR}/rcsysinit.d/S80localnet + if [ ! -f ${EXTDIR}/sysconfig/createfiles ]; then install -m ${CONFMODE} sysconfig/createfiles ${EXTDIR}/sysconfig/; fi + if [ ! -f ${EXTDIR}/sysconfig/modules ]; then install -m ${CONFMODE} sysconfig/modules ${EXTDIR}/sysconfig/; fi + if [ ! -f ${EXTDIR}/sysconfig/rc ]; then install -m ${CONFMODE} sysconfig/rc ${EXTDIR}/sysconfig/; fi + if [ ! -f ${EXTDIR}/sysconfig/rc.site ]; then install -m ${CONFMODE} sysconfig/rc.site ${EXTDIR}/sysconfig/; fi + install -m ${MODE} sysconfig/network-devices/ifup ${EXTDIR}/sysconfig/network-devices/ + install -m ${MODE} sysconfig/network-devices/ifdown ${EXTDIR}/sysconfig/network-devices/ + install -m ${MODE} sysconfig/network-devices/services/ipv4-static ${EXTDIR}/sysconfig/network-devices/services/ + install -m ${MODE} sysconfig/network-devices/services/ipv4-static-route ${EXTDIR}/sysconfig/network-devices/services/ + +minimal: create-dirs create-service-dir create-boottemp-dir + install -m ${MODE} init.d/checkfs ${EXTDIR}/init.d/ + install -m ${MODE} init.d/cleanfs ${EXTDIR}/init.d/ + install -m ${CONFMODE} init.d/lfs-functions ${EXTDIR}/init.d/ + install -m ${MODE} init.d/halt ${EXTDIR}/init.d/ + install -m ${MODE} init.d/localnet ${EXTDIR}/init.d/ + install -m ${MODE} init.d/mountfs ${EXTDIR}/init.d/ + install -m ${MODE} init.d/mountkernfs ${EXTDIR}/init.d/ + install -m ${MODE} init.d/rc ${EXTDIR}/init.d/ + install -m ${MODE} init.d/reboot ${EXTDIR}/init.d/ + install -m ${MODE} init.d/sendsignals ${EXTDIR}/init.d/ + install -m ${MODE} init.d/setclock ${EXTDIR}/init.d/ + install -m ${MODE} init.d/swap ${EXTDIR}/init.d/ + install -m ${MODE} init.d/udev ${EXTDIR}/init.d/ + install -m ${CONFMODE} lsb/init-functions ${DESTDIR}/lib/lsb/ + install -m ${CONFMODE} lsb/manage-functions ${DESTDIR}/lib/lsb/ + install -m ${CONFMODE} etc/lsb-config ${EXTDIR}/lsb/ + ln -sf ../init.d/sendsignals ${EXTDIR}/rc0.d/S60sendsignals + ln -sf ../init.d/mountfs ${EXTDIR}/rc0.d/S70mountfs + ln -sf ../init.d/swap ${EXTDIR}/rc0.d/S80swap + ln -sf ../init.d/halt ${EXTDIR}/rc0.d/S99halt + ln -sf ../init.d/sendsignals ${EXTDIR}/rc6.d/S60sendsignals + ln -sf ../init.d/mountfs ${EXTDIR}/rc6.d/S70mountfs + ln -sf ../init.d/swap ${EXTDIR}/rc6.d/S80swap + ln -sf ../init.d/reboot ${EXTDIR}/rc6.d/S99reboot + ln -sf ../init.d/mountkernfs ${EXTDIR}/rcsysinit.d/S00mountkernfs + ln -sf ../init.d/udev ${EXTDIR}/rcsysinit.d/S10udev + ln -sf ../init.d/swap ${EXTDIR}/rcsysinit.d/S20swap + ln -sf ../init.d/setclock ${EXTDIR}/rcsysinit.d/S25setclock + ln -sf ../init.d/checkfs ${EXTDIR}/rcsysinit.d/S30checkfs + ln -sf ../init.d/mountfs ${EXTDIR}/rcsysinit.d/S40mountfs + ln -sf ../init.d/cleanfs ${EXTDIR}/rcsysinit.d/S50cleanfs + if [ ! -f ${EXTDIR}/sysconfig/rc ]; then install -m ${CONFMODE} sysconfig/rc ${EXTDIR}/sysconfig/; fi + +.PHONY: all create-dirs create-service-dir create-boottemp-dir \ + install minimal + diff --git a/bootscripts/contrib/lsb-v3/README b/bootscripts/contrib/lsb-v3/README new file mode 100644 index 000000000..a2649bce0 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/README @@ -0,0 +1,105 @@ +LSB-V3 README + +The scripts contianed in this directory are a complete rewrite of the +boot scripts from LFS-6.1 (updated for LFS-SVN about 2008-04-13). As is +usually the case with a rewrite, there have been many changes: + +LSB Version 3.1 Compliant Scripts - Immediately noticable are the LSB headers +in the rc.d scripts themselves. Each script contains a usable header to +allow for automating both the installation of, and determining proper +execution order for the startup scripts. These values can also be used +directly in parallel boot setups. Additionally, messages are displayed in +one single write to the screen, after exit status is determined, so that +they can be used in parallel setups. I am not sure if this was the only +barrier to auto language translation in the previous bootscripts. Further, +the messages are created from parts and only written to the screen in a +single command, so maybe no help at all WRT translated boot messages. + +LSB 3.1 Omissions - Unfortunately, this package is not completely LSB +compliant as it lacks install-initd and remove-initd programs. The current +popular flavor of these programs is written in Python, which, as you should +know, is not installed until BLFS. I began work on a bash implementation, +and have provided the needed functions to parse the LSB headers in the +manage-functions script (insalled by default into /lib/lsb). Unfortunately, +I have yet to complete the actual install-initd and remove-initd scripts, +however, I do have an almost complete install-initd kept locally. I am +currently working on a separate script to completely rewrite the symlinks +should LFS default values not prove sufficient when working with scripts in +the wild. I have not included either here because they are not yet complete +or thoroughly tested, and due to the development process of lfs-bootscritps, +would be included in a release tarball. If you would like to assist with the +development of these scripts, or would even just like to see what I have so +far, please email me privately. Of course, feel free to write your own if you +do not like the manage-fucntions script (or bash). + +Distribution Independent - this original goal for the LFS scripts has been +stretched even further by providing both a global rc config file that +contains (generally) static values, and a new rc.site config file to allow +customization of messages as diplayed to the end user during the boot +process. The format of messages printed to the screen is adjustable +here. As well, the other options that were available in the previous +versions of the lfs-bootscripts, and additional options as discussed below, +are configurable by the /etc/sysconfig/rc.site file. + +Single Environment - The rc script has been rewritten completely to allow a +single source of the boot configuration per runlevel change. This config +is inherited from rc's environment as opposed to being sourced everytime a +script is run. This results in a negledgable decrease in boot time, but +it is just better in principle. + +Boot Logging - The previous incarnation of the boot log didn't begin +recording events until the root filesystem was mounted read/write. This has +been corrected by providing a tempfs mount immediately after init hands +control to the rc script. The bootlog is generated on the tempfs and then +passed to the log file before login. Additionally, shutdown events are no +longer recorded in the bootlog. They were pretty much useless and it really +wasn't what I'd call a *boot* log. Boot logging is on by default and is +configurable in the /etc/sysconfig/rc.site file. + +Interactive Boot - This feature has been included by default, and is a +little more polished than my previous attempt. It does introduce a two +second delay in the boot process (so that you have time to press a button +to select interactive mode). This time value, and the option prompt itself, +is configurable in the /etc/sysconfig/rc.site file. + +RC_BASE - The base directory for the bootscripts is now /etc, not +/etc/rc.d. This is mostly to conform with mainstream distros, but other +boot methods do expect that /etc/init.d is the location of bootscripts. +Some distros provide a rc.d direcorty with symlinks to the rc*.d and init.d +directories, I have not done that. /etc is the location now, get your +flying fingers accustomed to it! Of course, this is still configurable in +/etc/sysconfig/rc.site, and if the change is too great, I'll put it back. + +LSB Functions - The previous lfs-bootscripts sourced a functions file +located at /etc/rc.d/init.d/functions. This file has been renamed +$distro-functions to segregate it from the old. The name is configurable +by the rc.site configuration file. Both old and new bootscripts can be +used simultaneously in a SYS-V setup (with proper symlinks in place). +LSB defined functions are used where possible, but the $distro-functions file +provides, easy to use wraper functions that +start/stop/reload/force-reload/restart programs, evaluate the numerical +LSB return values, and print status messages to the screen. Both LFS +functions and LSB functions are documented directly in the scritps located +at /etc/init.d/$distro-functions and /lib/lsb/init-functions respectively. + +Pretier - Yeah, I just couldn't handle all the grey text... By default, +successful boot messages are prefixed with a single green astrik character, +warning messages with two yellow astirks, and failures are prefixed with +three red astriks. This just provides a second 'quick glance' status when +watching the boot messages fly by. Again, the prefixes are configurable (or +completely removable) in the /etc/sysconfig/rc.site file. + +Complete Rewrite - Yep. That doesn't mean that code wasn't reused when +possible, so Alexander, Bryan, Dan, Gerard, Jeremy, Jim, Mathias, Matthew, +Nathan, and countless other contributors (whose names I've forgotten and will +promptly be reminded of (please)) are due credit for these as well. That +said, at very least, this is a complete reorganisation that I've tested to +the best of my ability, but there probably are some hidden bugs that will +come to lite when used more frequently. Please give me a shout _when_ you +find them. + +Thanks. + +-- DJ Lucas +dj@linuxfromscratch.org + diff --git a/bootscripts/contrib/lsb-v3/etc/lsb-config b/bootscripts/contrib/lsb-v3/etc/lsb-config new file mode 100644 index 000000000..856f8bf85 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/etc/lsb-config @@ -0,0 +1,8 @@ +# Begin /etc/lsb/lsb-config + +rcbase="/etc/init.d" +statedir="/etc/lsb/state" +distro="LFS" + +# End /etc/lsb/lsb-config + diff --git a/bootscripts/contrib/lsb-v3/init.d/checkfs b/bootscripts/contrib/lsb-v3/init.d/checkfs new file mode 100644 index 000000000..5523d5e51 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/checkfs @@ -0,0 +1,105 @@ +#!/bin/sh +# Begin /etc/init.d/checkfs + +### BEGIN INIT INFO +# Provides: checkfs +# Required-Start: udev swap $time +# Should-Start: lvm +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Checks local filesystems before mounting. +# Description: Checks local filesystmes before mounting. +# X-LFS-Default-Start: S30 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + if [ -f /fastboot ]; then + echo "${INFO}/fastboot found!" + log_success_msg "Will not perform file system checks as requested." + exit 0 + fi + + mount -n -o remount,ro / >/dev/null + if [ ${?} != 0 ] + then + log_failure_msg "Mounting root file system in read-only mode" + echo "${FAILURE}FAILURE:\n" + echo -n "${FIALURE}Cannot check root filesystem because it " + echo "${FAILURE}could not be mounted" + echo "${FAILURE}in read-only mode.\n\n" + echo -n "${FAILURE}After you press Enter, this system will be " + echo "${FAILURE}halted and powered off.\n" + echo "${INFO}Press enter to continue...${NORMAL}" + read ENTER + /etc/rc.d/init.d/halt stop + fi + + if [ -f /forcefsck ] + then + echo "${INFO}/forcefsck found!" + log_success_msg "${INFO}Forcing file system checks as requested." + options="-f" + else + options="" + fi + + # Note: -a option used to be -p; but this fails e.g. + # on fsck.minix + fsck ${options} -a -A -C -T + error_value=${?} + + if [ "${error_value}" = 0 ] + then + log_success_msg "Checking file systems..." + elif [ "${error_value}" = 1 ] + then + log_warning_msg "Checking file systems..." + echo "${WARNING}WARNING:\n" + echo "${WARNING}File system errors were found and have been" + echo "${WARNING}corrected. You may want to double-check that" + echo "${WARNING}everything was fixed properly.${NORMAL}" + elif [ "${error_value}" = 2 -o "${error_value}" = 3 ]; then + log_warning_msg "Checking file systems..." + echo "${WARNING}WARNING:\n" + echo "${WARNING}File system errors were found and have been been" + echo "${WARNING}corrected, but the nature of the errors require" + echo "${WARNING}this system to be rebooted.\n" + echo "After you press enter, this system will be rebooted.\n" + echo "${INFO}Press Enter to continue...${NORMAL}" + read ENTER + reboot -f + elif [ "${error_value}" -gt 3 -a "${error_value}" -lt 16 ]; then + log_failure_msg "Checking file systems..." + echo "${FAILURE}FAILURE:\n" + echo "${FAILURE}File system errors were encountered that could" + echo "${FAILURE}not be fixed automatically. This system cannot" + echo "${FAILURE}continue to boot and will therefore be halted" + echo "${FAILURE}until those errors are fixed manually by a" + echo "${FAILURE}System Administrator.\n" + echo "${FAILURE}After you press Enter, this system will be" + echo "${FAILURE}halted and powered off.\n" + echo "${INFO}Press Enter to continue...${NORMAL}" + read ENTER + /etc/rc.d/init.d/halt stop + elif [ "${error_value}" -ge 16 ]; then + log_failure_msg "Checking file systems..." + echo "${FAILURE}FAILURE:\n" + echo "${FAILURE}Unexpected Failure running fsck. Exited with error" + echo "${FAILURE}code: ${error_value}.${NORMAL}" + exit ${error_value} + fi + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End /etc/init.d/checkfs diff --git a/bootscripts/contrib/lsb-v3/init.d/cleanfs b/bootscripts/contrib/lsb-v3/init.d/cleanfs new file mode 100644 index 000000000..b160fbc22 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/cleanfs @@ -0,0 +1,113 @@ +#!/bin/sh +# Begin /etc/init.d/cleanfs + +### BEGIN INIT INFO +# Provides: cleanfs +# Required-Start: $local_fs +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Cleans temporary directories early in the boot process. +# Description: Cleans temporary directories /var/run, /var/lock, and +# /tmp. cleanfs also creates /var/run/utmp and any files +# defined in /etc/sysconfig/createfiles. +# X-LFS-Default-Start: S50 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +# Function to create files/directory on boot. +create_files() +{ + # Read in the configuration file. + exec 9>&0 < /etc/sysconfig/createfiles + while read name type perm usr grp dtype maj min junk + do + # Ignore comments and blank lines. + case "${name}" in + ""|\#*) continue ;; + esac + + # Ignore existing files. + if [ ! -e "${name}" ] + then + # Create stuff based on its type. + case "${type}" in + dir) + mkdir "${name}" + ;; + file) + :> "${name}" + ;; + dev) + case "${dtype}" in + char) + mknod "${name}" c ${maj} ${min} + ;; + block) + mknod "${name}" b ${maj} ${min} + ;; + pipe) + mknod "${name}" p + ;; + *) + echo -n "\n${WARNING}Unknown device type: ${dtype}" + echo "${NORMAL}" + ;; + esac + ;; + *) + echo "\n${WARNING}Unknown type: ${type}${NORMAL}" + continue + ;; + esac + + # Set up the permissions, too. + chown ${usr}:${grp} "${name}" + chmod ${perm} "${name}" + fi + done + exec 0>&9 9>&- +} + +case "${1}" in + start) + message="Cleaning file systems: " + + message="${message}${INFO} /tmp" + find /tmp -xdev -mindepth 1 ! -name lost+found \ + -delete || failed=1 + + message="${message} /var/lock" + find /var/lock -type f -exec rm -f {} \; || failed=1 + + message="${message} /var/run${NORMAL}" + find /var/run ! -type d ! -name utmp -exec rm -f {} \; || failed=1 + + > /var/run/utmp + if grep -q '^utmp:' /etc/group ; then + chmod 664 /var/run/utmp + chgrp utmp /var/run/utmp + fi + + (exit ${failed}) + evaluate_retval standard + + if egrep -qv '^(#|$)' /etc/sysconfig/createfiles 2>/dev/null + then + message="Creating files and directories..." + create_files + evaluate_retval standard + fi + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End /etc/init.d/cleanfs diff --git a/bootscripts/contrib/lsb-v3/init.d/console b/bootscripts/contrib/lsb-v3/init.d/console new file mode 100644 index 000000000..87e392378 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/console @@ -0,0 +1,111 @@ +#!/bin/sh +# Begin $rc_base/init.d/console + +### BEGIN INIT INFO +# Provides: console +# Required-Start: +# Should-Start: $local_fs +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Sets up a localised console. +# Description: Sets up fonts and language settings for the user's +# local as defined by /etc/sysconfig/console. +# X-LFS-Default-Start: S70 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +MESSAGE="Setting up Linux console..." + +# Native English speakers probably don't have /etc/sysconfig/console at all +if [ -f /etc/sysconfig/console ] +then + . /etc/sysconfig/console +fi + +is_true() { + [ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ] +} + +failed=0 + +case "${1}" in + start) + # There should be no bogus failures below this line! + + # Figure out if a framebuffer console is used + [ -d /sys/class/graphics/fb0 ] && USE_FB=1 || USE_FB=0 + + # Figure out the command to set the console into the + # desired mode + is_true "${UNICODE}" && + MODE_COMMAND="echo -en '\033%G' && kbd_mode -u" || + MODE_COMMAND="echo -en '\033%@\033(K' && kbd_mode -a" + + # On framebuffer consoles, font has to be set for each vt in + # UTF-8 mode. This doesn't hurt in non-UTF-8 mode also. + + ! is_true "${USE_FB}" || [ -z "${FONT}" ] || + MODE_COMMAND="${MODE_COMMAND} && setfont ${FONT}" + + # Apply that command to all consoles mentioned in + # /etc/inittab. Important: in the UTF-8 mode this should + # happen before setfont, otherwise a kernel bug will + # show up and the unicode map of the font will not be + # used. + # FIXME: Fedora Core also initializes two spare consoles + # - do we want that? + + for TTY in `grep '^[^#].*respawn:/sbin/agetty' /etc/inittab | + grep -o '\btty[[:digit:]]*\b'` + do + openvt -f -w -c ${TTY#tty} -- \ + /bin/sh -c "${MODE_COMMAND}" || failed=1 + done + + # Set the font (if not already set above) and the keymap + is_true "${USE_FB}" || [ -z "${FONT}" ] || + setfont $FONT || + failed=1 + [ -z "${KEYMAP}" ] || + loadkeys ${KEYMAP} >/dev/null 2>&1 || + failed=1 + [ -z "${KEYMAP_CORRECTIONS}" ] || + loadkeys ${KEYMAP_CORRECTIONS} >/dev/null 2>&1 || + failed=1 + + # Linux kernel generates wrong bytes when composing + # in Unicode mode. That's why we disable dead keys in Unicode + # mode by default. If you need them, download and apply + # http://www.linuxfromscratch.org/~alexander/patches/linux-2.6.12.5-utf8_input-2.patch + # After patching, add "-m charset_of_your_keymap" to the FONT + # variable and set BROKEN_COMPOSE=false + # in /etc/sysconfig/console + + [ -n "$BROKEN_COMPOSE" ] || BROKEN_COMPOSE="$UNICODE" + ! is_true "$BROKEN_COMPOSE" || + echo "" | loadkeys -c >/dev/null 2>&1 || + failed=1 + + # Convert the keymap from $LEGACY_CHARSET to UTF-8 + [ -z "$LEGACY_CHARSET" ] || + dumpkeys -c "$LEGACY_CHARSET" | + loadkeys -u >/dev/null 2>&1 || + failed=1 + + # If any of the commands above failed, the trap at the + # top would set $failed to 1 + ( exit $failed ) + evaluate_retval standard + ;; + *) + echo $"Usage:" "${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/console diff --git a/bootscripts/contrib/lsb-v3/init.d/halt b/bootscripts/contrib/lsb-v3/init.d/halt new file mode 100644 index 000000000..22c14d6a4 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/halt @@ -0,0 +1,32 @@ +#!/bin/sh +# Begin $RC_BASE/init.d/halt + +### BEGIN INIT INFO +# Provides: halt +# Required-Start: +# Should-Start: +# Required-Stop: localnet +# Should-Stop: +# Default-Start: 0 +# Default-Stop: +# Short-Description: Halts the system. +# Description: Halts the System. +# X-LFS-Default-Start: +# X-LFS-Default-Stop: S99 +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + stop) + log_success_msg "Halting System..." + halt -d -f -i -p + ;; + *) + echo "Usage: {stop}" + exit 1 + ;; +esac + +# End /etc/init.d/halt diff --git a/bootscripts/contrib/lsb-v3/init.d/lfs-functions b/bootscripts/contrib/lsb-v3/init.d/lfs-functions new file mode 100644 index 000000000..34dfeefdc --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/lfs-functions @@ -0,0 +1,215 @@ +# Begin /etc/init.d/lfs-functions +# Provides LFS specific functions for LSB style bootscripts + +################################# chkstat() ################################### +# chk_stat checks the status of a script by checking for both a binary file # +# to execute, and if set, a config file that may be needed for the program # +# to run successfully. The calling script will exit with a return value of 5 # +# if the binary does not exist, and a value of 6 if the needed config file is # +# unavailable as per LSB requirements. This function accepts zero, one, or # +# two string arguments. If arguments are passed, the first must be a bin # +# file. If a second argument is passed, it is interpreted as the config # +# file. Optionally, zero arguments can be passed if BIN_FILE, and optinally # +# CONFIG_FILE are set in the calling script. # +############################################################################### +chk_stat() +{ + if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then + BIN_FILE="${1}" + if [ -z "${2}" ]; then + CONFIG_FILE="" + else + CONFIG_FILE="${2}" + fi + elif [ -z "${BIN_FILE}" ]; then + echo "Usage: 'chk_stat BIN_FILE CONFIG_FILE'" + exit 1 # Generic Error + fi + + if [ ! -e "${BIN_FILE}" ]; then + log_failure_msg "${BIN_FILE} not installed" && + exit 5 + fi + + if [ ! -z "${CONFIG_FILE}" ]; then + if [ ! -e "${CONFIG_FILE}" ]; then + log_failure_msg "${CONFIG_FILE} does not exist" && + exit 6 + fi + fi +} + +################################ loadproc() ################################### +# loadproc is just a wraper to start_daemon for simple scripts, which will # +# require no arguments if $BIN_FILE is set. # +############################################################################### +loadproc() +{ + start_daemon "${BIN_FILE}" "${@}" +} + +################################ endproc() #################################### +# endproc, like loadproc, is just a wraper to killproc for simplicity and is # +# dependent on $BIN_FILE being set. # +############################################################################### +endproc() +{ + killproc "${BIN_FILE}" "${@}" +} + +############################### statusproc() ################################## +# statusproc checks the status of a particular binary and displays the # +# appropriate message (running or not running) and exits on the return value # +# of pidofproc. This function accepts two string arguments or zero arguments # +# if BIN_FILE and MESSAGE are set, else it requires the bin file as the first # +# argument, and the message as the second. Both must be enclosed in quotes. # +############################################################################### +statusproc() +{ + if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then + BIN_FILE="${1}" + MESSAGE="${2}" + elif [ -z "${BIN_FILE}" -o -z "${MESSAGE}" ]; then + echo "Usage: 'statusproc BIN_FILE MESSAGE'" + exit 1 # Generic Error + fi + + pidlist=`pidofproc "${BIN_FILE}"` + STATUS=$? + echo "Checking ${MESSAGE} status:" + if [ "${STATUS}" = "0" ]; then + log_success_msg "Running with PID(s) ${pidlist}" + else + + log_warning_msg "Not running!" + fi + + return "${STATUS}" +} + +############################### reloadproc() ################################## +# reloadproc sends a HUP signal to the running program (relaod configuration) # +# It optionally, using the -force switch, checks the status of a particular # +# program and starts it if it is not already running. This function accepts # +# one optional switch (must be the first argument), and either two, or zero # +# string arguments. If BIN_FILE and MESSAGE are set in the script's # +# environment, it will use those values, else it requires the bin file as # +# the first argument (following -force if used), and the message as the # +# second. Both must be enclosed in quotes. If the force option is used, it # +# follows the LSB definition of 'force-reload' - the program is started if # +# not already running. # +############################################################################### +reloadproc() +{ + local force="0" + if [ "${#}" -gt "0" -a "${1}" = "-force" ]; then + force="1" + shift 1 + fi + + if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then + BIN_FILE="${1}" + MESSAGE="${2}" + elif [ -z "${BIN_FILE}" -o -z "${MESSAGE}" ]; then + echo "Usage: 'reloadproc BIN_FILE MESSAGE'" + exit 1 # Generic Error + fi + + + +} + +############################## evaluate_retval() ############################### +# evaluate_retval requires that you pass exactly one evaluation parameter of # +# (start, stop, other) based on the previous action that is being evaluated. # +# This function is intended for use with start_daemon and killproc to # +# interpret the LSB exit codes properly, othewise the checks only for success # +# or failure. # +################################################################################ +evaluate_retval() +{ + local error_value="${?}" + + # Handle LSB defined return values + case "${1}" in + + start) + case "${error_value}" in + 0) + log_success_msg "Starting ${MESSAGE} " + return "${error_value}" + ;; + 2) + log_failure_msg "Starting ${MESSAGE} Error: Invalid argument!" + return "${error_value}" + ;; + 5) + log_failure_msg "Starting ${MESSAGE} Error: Not available!" + return "${error_value}" + ;; + *) + log_failure_msg "Starting ${MESSAGE} Error: General failure!" + return "${error_value}" + ;; + esac + ;; + + stop) + case "${error_value}" in + 0) + log_success_msg "Stopping ${MESSAGE} " + return "${error_value}" + ;; + 2) + log_failure_msg "Stopping ${MESSAGE} Error: Invalid argument!" + return "${error_value}" + ;; + 5) + log_failure_msg "Stopping ${MESSAGE} Error: Not available!" + return "${error_value}" + ;; + 7) + log_warning_msg "Stopping ${MESSAGE} Warning: Not running!" + return "${error_value}" + ;; + *) + log_failure_msg "Stopping ${MESSAGE} Error: General failure!" + return "${error_value}" + ;; + esac + ;; + + force-reload) + message="Forcefully reloading " + ;; + + reload) + message="Reloading " + ;; + + restart) + message="Restarting " + ;; + + try-restart) + message="Trying restart " + ;; + + standard) + # $message or $MESSAGE must be set, but not both in order + # to use the 'standard' target. + ;; + esac + + # Print messages for the generic force-reload, reload, restart, + # and try-restart targets + if [ "${error_value}" = "0" ] + then + log_success_msg "${message}${MESSAGE} " + return "${error_value}" + else + log_failure_msg "${message}${MESSAGE} " + return "${error_value}" + fi +} + diff --git a/bootscripts/contrib/lsb-v3/init.d/localnet b/bootscripts/contrib/lsb-v3/init.d/localnet new file mode 100644 index 000000000..1a68fe3a2 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/localnet @@ -0,0 +1,84 @@ +#!/bin/sh +# Begin /etc/init.d/localnet + +### BEGIN INIT INFO +# Provides: localnet +# Required-Start: $local_fs +# Should-Start: +# Required-Stop: $network +# Should-Stop: swap +# Default-Start: sysinit 0 6 +# Default-Stop: +# Short-Description: Starts the local network. +# Description: Sets the hostname of the machine and starts the +# loopback interface. +# X-LFS-Default-Start: S80 +# X-LFS-Default-Stop: S90 +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions +. /etc/sysconfig/network + +case "${1}" in + start) + ip addr add 127.0.0.1/8 label lo dev lo + ip link set lo up + if [ "${?}" = "0" ] + then + log_success_msg "Bringing up the loopback interface..." + else + log_failure_msg "Bringing up the loopback interface..." + fi + + hostname "${HOSTNAME}" + if [ "${?}" = "0" ] + then + log_success_msg "Setting hostname to ${HOSTNAME}..." + else + log_failure_msg "Setting hostname to ${HOSTNAME}..." + fi + + ;; + + stop) + ip link set lo down + if [ "${?}" = "0" ] + then + log_success_msg "Bringing down the loopback interface..." + else + log_failure_msg "Bringing down the loopback interface..." + fi + + ;; + + restart) + ip link set lo down + retval="${?}" + sleep 1 + ip addr add 127.0.0.1/8 label lo dev lo + retval=$(( "${retval}" + "${?}" )) + ip link set lo up + retval=$(( "${retval}" + "${?}" )) + hostname "${HOSTNAME}" + retval=$(( "${retval}" + "${?}" )) + if [ "${retval}" = "0" ] + then + log_success_msg "Restarting local network..." + else + log_failure_msg "Restarting local network..." + fi + ;; + + status) + log_success_msg "Hostname is: ${INFO}$(hostname)${NORMAL}" + ip link show lo + ;; + + *) + echo "Usage: ${0} {start|stop|restart|status}" + exit 1 + ;; +esac + +# End /etc/init.d/localnet diff --git a/bootscripts/contrib/lsb-v3/init.d/modules b/bootscripts/contrib/lsb-v3/init.d/modules new file mode 100644 index 000000000..d5e1ad646 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/modules @@ -0,0 +1,99 @@ +#!/bin/sh +# Begin /etc/init.d/modules + +### BEGIN INIT INFO +# Provides: modules +# Required-Start: mountkernfs +# Should-Start: sysctl +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Loads required modules. +# Description: Loads modules listed in /etc/sysconfig/modules. +# X-LFS-Default-Start: S10 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +# Assure that the kernel has module support. +[ -e /proc/ksyms -o -e /proc/modules ] || exit 0 + +case "${1}" in + start) + + # Exit if there's no modules file or there are no + # valid entries + [ -r /etc/sysconfig/modules ] && + egrep -qv '^($|#)' /etc/sysconfig/modules || + exit 0 + + # If proc is mounted, find the current kernel + # message level + if [ -f /proc/sys/kernel/printk ]; then + prev_msg=`cat /proc/sys/kernel/printk | \ + sed 'l 1' | sed -n '2~0p' | \ + sed 's/\\\//'` + else + prev_msg="6" + fi + + # Now set the message level to 1 so not to make too + # much noise when loading modules + dmesg -n 1 + + # Only try to load modules if the user has actually given us + # some modules to load. + if egrep -qv '^(#|$)' /etc/sysconfig/modules 2>/dev/null + then + + # Read in the configuration file. + exec 9>&0 < /etc/sysconfig/modules + + message="${INFO}Loading modules:" + + while read module args + do + # Ignore comments and blank lines. + case "${module}" in + ""|\#*) continue ;; + esac + + # Attempt to load the module, making + # sure to pass any arguments provided. + modprobe ${module} ${args} > /dev/null + + # Print the module name if successful, + # otherwise take note. + if [ ${?} -eq 0 ]; then + message="${message}${NORMAL} ${module}" + else + failedmod="${failedmod} ${module}" + fi + done + + # Print a message about successfully loaded + # modules on the correct line. + log_success_msg "${message}" + + # Print a failure message with a list of any + # modules that may have failed to load. + if [ "${failedmod}" ]; then + log_failure_msg "${FAILURE}Failed to load modules:${failedmod}" + fi + + exec 0>&9 9>&- + + fi + # Set the kernel message level back to it's previous value. + dmesg -n "${prev_msg}" + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End /etc/init.d/modules diff --git a/bootscripts/contrib/lsb-v3/init.d/mountfs b/bootscripts/contrib/lsb-v3/init.d/mountfs new file mode 100644 index 000000000..eb9a728eb --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/mountfs @@ -0,0 +1,60 @@ +#!/bin/sh +# Begin /etc/init.d/mountfs + +### BEGIN INIT INFO +# Provides: $local_fs +# Required-Start: udev checkfs +# Should-Start: lvm +# Required-Stop: sendsignals +# Should-Stop: +# Default-Start: sysinit 0 6 +# Default-Stop: +# Short-Description: Mounts and unmounts all local filesystems. +# Description: Remounts root filesystem read/write and mounts all +# remaining local filesystems defined in /etc/fstab on +# start. Rmounts root filesystem read-only and unmounts +# remaining filesystems on stop. +# X-LFS-Default-Start: S40 +# X-LFS-Default-Stop: S70 +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + message="Remounting root file system in read-write mode..." + mount -n -o remount,rw / >/dev/null + evaluate_retval standard + + # Remove fsck-related file system watermarks. + rm -f /fastboot /forcefsck + + message="Recording existing mounts in /etc/mtab..." + > /etc/mtab + mount -f / || failed=1 + mount -f /proc || failed=1 + mount -f /sys || failed=1 + (exit ${failed}) + evaluate_retval standard + + # This will mount all filesystems that do not have _netdev in + # their option list. _netdev denotes a network filesystem. + message="Mounting remaining file systems..." + mount -a -O no_netdev >/dev/null + evaluate_retval standard + ;; + + stop) + message="Unmounting all other currently mounted file systems..." + umount -a -d -r >/dev/null + evaluate_retval standard + ;; + + *) + echo "Usage: ${0} {start|stop}" + exit 1 + ;; +esac + +# End /etc/init.d/mountfs diff --git a/bootscripts/contrib/lsb-v3/init.d/mountkernfs b/bootscripts/contrib/lsb-v3/init.d/mountkernfs new file mode 100644 index 000000000..6362b3db9 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/mountkernfs @@ -0,0 +1,45 @@ +#!/bin/sh +# Begin /etc/init.d/mountkernfs + +### BEGIN INIT INFO +# Provides: mountkernfs +# Required-Start: +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Mounts /sys and /proc virtual (kernel) filesystems. +# Description: Mounts /sys and /proc virtual (kernel) filesystems. +# X-LFS-Default-Start: S00 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + message="Mounting kernel-based file systems:" + + if ! mountpoint /proc > /dev/null; then + message="${message}${INFO} /proc${NORMAL}" + mount -n /proc || failed=1 + fi + + if ! mountpoint /sys > /dev/null; then + message="${message}${INFO} /sys${NORMAL}" + mount -n /sys || failed=1 + fi + + (exit ${failed}) + evaluate_retval standard + ;; + + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End /etc/init.d/mountkernfs diff --git a/bootscripts/contrib/lsb-v3/init.d/network b/bootscripts/contrib/lsb-v3/init.d/network new file mode 100644 index 000000000..799f1861c --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/network @@ -0,0 +1,74 @@ +#!/bin/sh +# Begin /etc/init.d/network + +### BEGIN INIT INFO +# Provides: $network +# Required-Start: $syslog +# Should-Start: +# Required-Stop: +# Should-Stop: $remote_fs +# Default-Start: 3 4 5 +# Default-Stop: 0 1 2 6 +# Short-Description: Starts and configures network interfaces. +# Description: Starts and configures network interfaces. +# X-LFS-Default-Start: S20 +# X-LFS-Default-Stop: K80 +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions +. /etc/sysconfig/network + +case "${1}" in + start) + # Start all network interfaces + for file in ${NETWORK_DEVICES}/ifconfig.* + do + interface=${file##*/ifconfig.} + + # skip if $file is * (because nothing was found) + if [ "${interface}" = "*" ] + then + continue + fi + + IN_BOOT=1 ${NETWORK_DEVICES}/ifup ${interface} + done + ;; + + stop) + # Reverse list + FILES="" + for file in ${NETWORK_DEVICES}/ifconfig.* + do + FILES="${file} ${FILES}" + done + + # Stop all network interfaces + for file in ${FILES} + do + interface=${file##*/ifconfig.} + + # skip if $file is * (because nothing was found) + if [ "${interface}" = "*" ] + then + continue + fi + + IN_BOOT=1 ${NETWORK_DEVICES}/ifdown ${interface} + done + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + *) + echo "Usage: ${0} {start|stop|restart}" + exit 1 + ;; +esac + +# End /etc/init.d/network diff --git a/bootscripts/contrib/lsb-v3/init.d/rc b/bootscripts/contrib/lsb-v3/init.d/rc new file mode 100644 index 000000000..c9a0aa51e --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/rc @@ -0,0 +1,193 @@ +#!/bin/sh +# Begin $RC_BASE/init.d/rc + +# Get the configuration file +# All changes are to occur in the config file +. /etc/sysconfig/rc + +# These 3 signals will not cause our script to exit +trap "" INT QUIT TSTP + +# Simple sanity check - rc only takes one argument +if [ "${#}" -ne 1 ]; then + echo "Usage: ${0} <runlevel>" >&2 + exit 1 +fi + +# Do not use the RUNLEVEL and PREVLEVEL variables provided by init so +# that they can be modified and alternate directories (sysinit) can +# be used without affecting init +runlevel="${1}" +prevlevel="${PREVLEVEL}" + +# Just in case - some flavors of init don't set PREVLEVEL to 'N' +if [ "${prevlevel}" = "" ]; then + prevlevel="N" +fi + +# Mount a tmpfs to store boot accounting information +if [ "${runlevel}" = "sysinit" -a "${TEMPFS_MOUNT}" != "" ]; then + mount -n -t tmpfs tmpfs "${TEMPFS_MOUNT}" -o mode=600 +fi + +# Provide an interactive prompt (if requested) +if [ "${runlevel}" = "sysinit" -a "${iprompt}" = "yes" ]; then + # ash does not accept t and n flags for read + ls -l /bin/sh | grep "/ash" + if [ "${?}" -eq "0" ]; then + # We are using ash + echo -e -n "${WARNING}WARNING: Either bash or zsh is required" + echo -e "${WARNING} for interactive startup.\n" + sleep 3 + else + echo "" + # dcol and icol are spaces before the message to center the + # message on screen. + dcol=$(( $(( ${COLUMNS} - ${dlen} )) / 2 )) + icol=$(( $(( ${COLUMNS} - ${ilen} )) / 2 )) + echo -e "\\033[${dcol}G${welcome_message}" + echo -e "\\033[${icol}G${i_message}${NORMAL}" + echo "" + read -t "${itime}" -n 1 interactive 2>&1 > /dev/null + if [ "${interactive}" = "I" -o "${interactive}" = "i" ]; then + echo -n -e "${CURS_UP}" + echo -e "${INFO}Interactive boot selected...${NORMAL}" + echo "interactive=I" > "${TEMPFS_MOUNT}/.interactive-start" + fi + fi +fi + + +# Verify that the directory exists +if [ ! -d "${RC_BASE}/rc${runlevel}.d" ]; then + echo -n "${WARNING}${RC_BASE}/rc${runlevel}.d does not exist." + echo "${NORMAL}" + exit 1 +fi + +# Source the interactive state file if it exists +if [ "${runlevel}" != "sysinit" -a -f "${TEMPFS_MOUNT}/.interactive-start" ]; then + . "${TEMPFS_MOUNT}/.interactive-start" +fi + +# Prompt for interactive startup after completing sysinit +if [ "${interactive}" = "I" -a "${runlevel}" != "sysinit" -a \ + "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then + echo -n -e "Proceed with interactive starup of runlevel " + echo -n -e "${INFO}${runlevel}${NORMAL}?" + echo -n -e "(${FAILURE}y${NORMAL})es/(${FAILURE}n${NORMAL})o " + read -n 1 go_on + echo "" + if [ "${go_on}" = "n" ]; then + # don't continue + exit 0 + fi +fi + + +# Attempt to stop all services started in the previous runlevel, +# that are stopped in this runlevel +if [ "${prevlevel}" != "N" ]; then + for link in $(ls -v ${RC_BASE}/rc${runlevel}.d/K* 2> /dev/null) + do + # Check to see if link is a valid symlink + if [ ! -f ${link} ]; then + echo -e "${WARNING}${link} is not a valid symlink." + continue # go on to the next K* link + fi + + # Check to see if link is executable + if [ ! -x ${link} ]; then + echo -e "${WARNING}${link} is not executable, skipping." + continue # go on to the next K* link + fi + + script=${link#$RC_BASE/rc$runlevel.d/K[0-9][0-9]} + prev_start=$RC_BASE/rc$prevlevel.d/S[0-9][0-9]$script + sysinit_start=$RC_BASE/rcsysinit.d/S[0-9][0-9]$script + + if [ "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then + if [ ! -f ${prev_start} ] && [ ! -f ${sysinit_start} ]; then + echo -e -n "${WARNING}WARNING:\n\n${link} can't be" + echo -e "${WARNING} executed because it was not" + echo -e -n "${WARNING} not started in the previous" + echo -e "${WARNING} runlevel (${prevlevel})." + echo -e "${NORMAL}" + continue + fi + fi + ${link} stop + error_value=${?} + + if [ "${error_value}" != "0" ]; then + print_error_msg + fi + done +fi + +# Start all functions in this runlevel if they weren't started in +# the previous runlevel +for link in $( ls -v ${RC_BASE}/rc${runlevel}.d/S* 2> /dev/null) +do + if [ "${prevlevel}" != "N" ]; then + script=${link#$RC_BASE/rc$runlevel.d/S[0-9][0-9]} + stop=$RC_BASE/rc$runlevel.d/K[0-9][0-9]$script + prev_start=$RC_BASE/rc$prevlevel.d/S[0-9][0-9]$script + + [ -f ${prev_start} ] && [ ! -f ${stop} ] && continue + fi + + # Check to see if link is a valid symlink + if [ ! -f ${link} ]; then + echo -e "${WARNING}${link} is not a valid symlink." + continue # go on to the next K* link + fi + + # Check to see if link is executable + if [ ! -x ${link} ]; then + echo -e "${WARNING}${link} is not executable, skipping." + continue # go on to the next K* link + fi + + case ${runlevel} in + 0|6) + ${link} stop + ;; + + *) + if [ "${interactive}" = "I" -o "${interactive}" = "i" ]; then + echo -e -n "${WARNING}Start ${INFO}${link} ${WARNING}?" + echo -e -n "${NORMAL}(${FAILURE}y${NORMAL})es/(${FAILURE}n${NORMAL})o " + read -n 1 startit 2>&1 > /dev/null + echo "" + if [ "${startit}" = "y" -o "${startit}" = "Y" ]; then + ${link} start + else + echo -e -n "${WARNING}Not starting ${INFO}${link}" + echo -e "${WARNING}.${NORMAL}\n" + fi + else + ${link} start + fi + ;; + esac + error_value=${?} + + if [ "${error_value}" -gt "1" ]; then + print_error_msg + fi +done + +# Strip apply time to the logs, strip out any color codes and dump +# the log to /var/log/boot.log +if [ -f "${TEMPFS_MOUNT}/.bootlog" -a "${runlevel}" != "sysinit" ]; then + # Remove any color codes from the temp log file + sed -i 's@\\033\[[0-9];[0-9][0-9]m@@g' "${TEMPFS_MOUNT}/.bootlog" + #Fix the time and hostname + BTIMESPEC=$(echo `date +"%b %d %T"` `hostname`) + sed -i "s@^bootlog:@${BTIMESPEC} bootlog:@" "${TEMPFS_MOUNT}/.bootlog" + cat "${TEMPFS_MOUNT}/.bootlog" >> /var/log/boot.log + rm -f "${TEMPFS_MOUNT}/.bootlog" +fi + +# End $RC_BASE/init.d/rc diff --git a/bootscripts/contrib/lsb-v3/init.d/reboot b/bootscripts/contrib/lsb-v3/init.d/reboot new file mode 100644 index 000000000..6e6b71f8b --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/reboot @@ -0,0 +1,34 @@ +#!/bin/sh +# Begin /etc/init.d/reboot + +### BEGIN INIT INFO +# Provides: reboot +# Required-Start: +# Should-Start: +# Required-Stop: localnet +# Should-Stop: +# Default-Start: 6 +# Default-Stop: +# Short-Description: Reboots the system. +# Description: Reboots the System. +# X-LFS-Default-Start: +# X-LFS-Default-Stop: S99 +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + stop) + log_success_msg "Restarting system..." + reboot -d -f -i + ;; + + *) + echo "Usage: ${0} {stop}" + exit 1 + ;; + +esac + +# End /etc/init.d/reboot diff --git a/bootscripts/contrib/lsb-v3/init.d/sendsignals b/bootscripts/contrib/lsb-v3/init.d/sendsignals new file mode 100644 index 000000000..152cbfb2a --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/sendsignals @@ -0,0 +1,49 @@ +#!/bin/sh +# Begin /etc/init.d/sendsignals + +### BEGIN INIT INFO +# Provides: sendsignals +# Required-Start: +# Should-Start: +# Required-Stop: $syslog +# Should-Stop: +# Default-Start: 0 6 +# Default-Stop: +# Short-Description: Attempts to kill remaining processes. +# Description: Attempts to kill remaining processes. +# X-LFS-Default-Start: +# X-LFS-Default-Stop: S60 +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + stop) + message="Sending all processes the TERM signal..." + killall5 -15 + error_value=${?} + + sleep 3 + + (exit ${error_value}) + evaluate_retval standard + + message="Sending all processes the KILL signal..." + killall5 -9 + error_value=${?} + + sleep 3 + + (exit ${error_value}) + evaluate_retval standard + ;; + + *) + echo "Usage: ${0} {stop}" + exit 1 + ;; + +esac + +# End /etc/init.d/sendsignals diff --git a/bootscripts/contrib/lsb-v3/init.d/setclock b/bootscripts/contrib/lsb-v3/init.d/setclock new file mode 100644 index 000000000..a5237e9cb --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/setclock @@ -0,0 +1,61 @@ +#!/bin/sh +# Begin /etc/init.d/setclock + +### BEGIN INIT INFO +# Provides: $time +# Required-Start: udev +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Stores and restores time from the hardware clock +# Description: On boot, system time is obtained from hwclock. The +# hardware clock can also be set on shutdown. +# X-LFS-Default-Start: S25 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +BIN_FILE="/sbin/hwclock" +CONFIGFILE="/etc/sysconfig/clock" + +chk_stat + +. "${CONFIGFILE}" + +CLOCKPARAMS= + +case "${UTC}" in + yes|true|1) + CLOCKPARAMS="${CLOCKPARAMS} --utc" + ;; + + no|false|0) + CLOCKPARAMS="${CLOCKPARAMS} --localtime" + ;; + +esac + +case ${1} in + start) + message="Setting system clock..." + ${BIN_FILE} --hctosys ${CLOCKPARAMS} >/dev/null + evaluate_retval standard + ;; + + stop) + message="Setting hardware clock..." + ${BIN_FILE} --systohc ${CLOCKPARAMS} >/dev/null + evaluate_retval standard + ;; + + *) + echo "Usage: ${0} {start|stop}" + ;; + +esac + +# End /etc/init.d/setclock diff --git a/bootscripts/contrib/lsb-v3/init.d/swap b/bootscripts/contrib/lsb-v3/init.d/swap new file mode 100644 index 000000000..87c5f61c2 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/swap @@ -0,0 +1,57 @@ +#!/bin/sh +# Begin /etc/init.d/swap + +### BEGIN INIT INFO +# Provides: swap +# Required-Start: mountkernfs udev +# Should-Start: lvm +# Required-Stop: $local_fs +# Should-Stop: +# Default-Start: sysinit 0 6 +# Default-Stop: +# Short-Description: Mounts and unmounts swap partitions. +# Description: Mounts and unmounts swap partitions defined in +# /etc/fstab. +# X-LFS-Default-Start: S20 +# X-LFS-Default-Stop: S80 +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + message="Activating all swap files/partitions..." + swapon -a + evaluate_retval standard + ;; + + stop) + message="Deactivating all swap files/partitions..." + swapoff -a + evaluate_retval standard + ;; + + restart) + swapoff -a + error_level="${?}" + sleep 1 + swapon -a + error_level="$(( ${error_level} + ${?} ))" + (exit "${error_level}") + evaluate_retval restart + ;; + + status) + log_success_msg "Retrieving swap status..." + echo + swapon -s + ;; + + *) + echo "Usage: ${0} {start|stop|restart|status}" + exit 1 + ;; +esac + +# End /etc/init.d/swap diff --git a/bootscripts/contrib/lsb-v3/init.d/sysctl b/bootscripts/contrib/lsb-v3/init.d/sysctl new file mode 100644 index 000000000..ae9efb8f5 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/sysctl @@ -0,0 +1,41 @@ +#!/bin/sh +# Begin /etc/init.d/sysctl + +### BEGIN INIT INFO +# Provides: sysctl +# Required-Start: udev +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Makes changes to the proc filesystem +# Description: Makes changes to the proc filesystem as defined in +# /etc/sysctl.conf. See 'man sysctl(8)'. +# X-LFS-Default-Start: S05 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + if [ -f "/etc/sysctl.conf" ]; then + message="Setting kernel runtime parameters..." + sysctl -q -p + evaluate_retval standard + fi + ;; + + status) + sysctl -a + ;; + + *) + echo "Usage: ${0} {start|status}" + exit 1 + ;; +esac + +# End /etc/init.d/sysctl diff --git a/bootscripts/contrib/lsb-v3/init.d/sysklogd b/bootscripts/contrib/lsb-v3/init.d/sysklogd new file mode 100644 index 000000000..329349e81 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/sysklogd @@ -0,0 +1,71 @@ +#!/bin/sh +# Begin /etc/init.d/sysklogd + +### BEGIN INIT INFO +# Provides: $syslog +# Required-Start: localnet +# Should-Start: +# Required-Stop: $network +# Should-Stop: +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Starts kernel and system log daemons. +# Description: Starts kernel and system log daemons. +# /etc/fstab. +# X-LFS-Default-Start: S10 +# X-LFS-Default-Stop: K90 +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +case "${1}" in + start) + MESSAGE="system log daemon..." + start_daemon /usr/sbin/syslogd -m 0 + evaluate_retval start + + MESSAGE="kernel log daemon..." + start_daemon /usr/sbin/klogd + evaluate_retval start + ;; + + stop) + MESSAGE="kernel log daemon..." + killproc /usr/sbin/klogd + evaluate_retval stop + + MESSAGE="system log daemon..." + killproc /usr/sbin/syslogd + evaluate_retval stop + ;; + + force-reload) + MESSAGE="system log daemon config file..." + killproc -HUP `/usr/sbin/syslogd` + evaluate_retval reload + ;; + + restart) + MESSAGE="system and kernel log deamons..." + failed=0 + killproc /usr/sbin/klogd || failed=1 + killproc /usr/sbin/syslogd || failed=1 + start_daemon /usr/sbin/syslogd -m 0 || failed=1 + start_daemon /usr/sbin/klogd || failed=1 + (exit ${failed}) + evaluate_retval restart + ;; + + status) + statusproc /usr/sbin/syslogd + statusproc /usr/sbin/klogd + ;; + + *) + echo "Usage: ${0} {start|stop|force-reload|restart|status}" + exit 1 + ;; +esac + +# End /etc/init.d/sysklogd diff --git a/bootscripts/contrib/lsb-v3/init.d/template b/bootscripts/contrib/lsb-v3/init.d/template new file mode 100644 index 000000000..24a9e7f93 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/template @@ -0,0 +1,92 @@ +#!/bin/sh +# Begin /etc/init.d/template + +### BEGIN INIT INFO +# Provides: template +# Required-Start: +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: +# Default-Stop: +# Short-Description: +# Description: +# X-LFS-Default-Start: +# X-LFS-Default-Stop: +# X-LFS-Provided-By: +### END INIT INFO + +# Source the LSB init-functions, ours are pulled in from there. +. /lib/lsb/init-functions + +# These are optional, but required for chk_stat. They will be used in +# the rest of the functions if defined, else you must provide a program +# name to control, and a message ('Starting Template Service...' +# or 'Stoping Template Service...') to evauate_retval. See the +# documentaion in the lfs-fucntions file for more information. +MESSAGE="Template Service" +BIN_FILE="/some/path/to/template" +CONFIGFILE="/etc/sysconfig/template.conf" + +# check that $BIN_FILE exists and is executable, and $CONFIGFILE exists. +chk_stat + +# LSB Defined functions require that at least $BIN_FILE be passed to them, +# where as lfs-functions will use the $BIN_FILE environment variable. +# loadproc() and endproc() are just wrappers that pass everything on to +# the LSB defined functions. + +case "${1}" in + start) + #start_daemon "${BIN_FILE}" -arg1 -arg2 #... or: + loadproc -arg1 -arg2 -arg3 #... + evaluate_retval start + ;; + + stop) + #killproc -TERM "${BIN_FILE}" or: + endproc + evaluate_retval stop + ;; + + force-reload) + reloadproc -force + evaluate_retval force-reload + ;; + + restart) + $0 stop + $0 start + ;; + + status) + statusproc + ;; + +# reload and try-restart are optional per LSB requirements + reload) + reloadproc + evaluate_retval reload + ;; + + try-restart) + # Since this is optional there is no lfs-function for this one... + # might be at a later time if used enough, but I doubt it usefullness. + pidofproc "${BIN_FILE}" > /dev/null + if [ "${?}" -ne "0" ]; then + MESSAGE="${MESSAGE}: Not Running" + else + $0 stop + $0 start + exit 0 + fi + evaluate_retval try-restart + ;; + + *) + echo "Usage: ${0} {start|stop|{force-}reload|{try-}restart|status}" + exit 1 + ;; +esac + +# End /etc/init.d/template diff --git a/bootscripts/contrib/lsb-v3/init.d/udev b/bootscripts/contrib/lsb-v3/init.d/udev new file mode 100644 index 000000000..1aa80a3ef --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/udev @@ -0,0 +1,81 @@ +#!/bin/sh +# Begin $rc_base/init.d/udev + +### BEGIN INIT INFO +# Provides: udev +# Required-Start: mountkernfs +# Should-Start: +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Populated /dev with device nodes. +# Description: Mounts a tempfs on /dev and starts the udevd daemon. +# Device nodes are created as defined by udev. +# X-LFS-Default-Start: S15 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +MESSAGE="Populating /dev with device nodes..." + +case "${1}" in + start) + if ! grep -q '[[:space:]]sysfs' /proc/mounts; then + echo_failure + boot_mesg -n "FAILURE:\n\nUnable to create" ${FAILURE} + boot_mesg -n " devices without a SysFS filesystem" + boot_mesg -n "\n\nAfter you press Enter, this system" + boot_mesg -n " will be halted and powered off." + boot_mesg -n "\n\nPress Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + read ENTER + /etc/rc.d/init.d/halt stop + fi + + # Mount a temporary file system over /dev, so that any devices + # made or removed during this boot don't affect the next one. + # The reason we don't write to mtab is because we don't ever + # want /dev to be unavailable (such as by `umount -a'). + mount -n -t tmpfs tmpfs /dev -o mode=755 + if [ ${?} != 0 ]; then + echo_failure + boot_mesg -n "FAILURE:\n\nCannot mount a tmpfs" ${FAILURE} + boot_mesg -n " onto /dev, this system will be halted." + boot_mesg -n "\n\nAfter you press Enter, this system" + boot_mesg -n " will be halted and powered off." + boot_mesg -n "\n\nPress Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + read ENTER + /etc/rc.d/init.d/halt stop + fi + + # Udev handles uevents itself, so we don't need to have + # the kernel call out to any binary in response to them + echo > /proc/sys/kernel/hotplug + + # Copy static device nodes to /dev + cp -a /lib/udev/devices/* /dev + + # Start the udev daemon to continually watch for, and act on, + # uevents + /sbin/udevd --daemon + + # Now traverse /sys in order to "coldplug" devices that have + # already been discovered + /sbin/udevadm trigger + + # Now wait for udevd to process the uevents we triggered + /sbin/udevadm settle + evaluate_retval standard + ;; + + *) + echo "Usage ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/udev diff --git a/bootscripts/contrib/lsb-v3/init.d/udev_retry b/bootscripts/contrib/lsb-v3/init.d/udev_retry new file mode 100644 index 000000000..b87a7b3e9 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/init.d/udev_retry @@ -0,0 +1,51 @@ +#!/bin/sh +# Begin $rc_base/init.d/udev_retry + +### BEGIN INIT INFO +# Provides: udev_retry +# Required-Start: udev +# Should-Start: $local_fs +# Required-Stop: +# Should-Stop: +# Default-Start: sysinit +# Default-Stop: +# Short-Description: Replays failed uevents and creates additonal devices. +# Description: Replays any failed uevents that were skipped due to +# slow hardware initialization, and creates those needed +# device nodes +# X-LFS-Default-Start: S45 +# X-LFS-Default-Stop: +# X-LFS-Provided-By: LFS +### END INIT INFO + +. /lib/lsb/init-functions + +MESSAGE="Retrying failed uevents, if any..." + +case "${1}" in + start) + + # From Debian: "copy the rules generated before / was mounted + # read-write": + for file in /dev/.udev/tmp-rules--*; do + dest=${file##*tmp-rules--} + [ "$dest" = '*' ] && break + cat $file >> /etc/udev/rules.d/$dest + rm -f $file + done + + # Re-trigger the failed uevents in hope they will succeed now + /sbin/udevadm trigger --retry-failed + + # Now wait for udevd to process the uevents we triggered + /sbin/udevadm settle + evaluate_retval standard + ;; + + *) + echo "Usage ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/udev_retry diff --git a/bootscripts/contrib/lsb-v3/lsb/init-functions b/bootscripts/contrib/lsb-v3/lsb/init-functions new file mode 100644 index 000000000..76c99969b --- /dev/null +++ b/bootscripts/contrib/lsb-v3/lsb/init-functions @@ -0,0 +1,577 @@ +# Begin /lib/lsb/init-funtions + +# Provides initialization funtions as defined by the Linux Standard Base +# specification, version 3.1.0 + +# Source rc configuration if not inherited from the environment +if [ "${RC_BASE}" = "" ]; then + . /etc/sysconfig/rc +fi + +# Source the distro functions file +if [ "${DISTRO_MINI}" != "" ]; then + . "${RC_BASE}/init.d/${DISTRO_MINI}-functions" +fi + +################################################################################ +# start_daemon() # +# Usage: start_daemon [-f] [-n nicelevel] [-p pidfile] pathname [args...] # +# # +# Purpose: This runs the specified program as a daemon # +# # +# Inputs: -f: (force) run the program even if it is already running. # +# -n nicelevel: specify a nice level. See 'man nice(1)'. # +# -p pidfile: use the specified file to determine PIDs. # +# pathname: the complete path to the specified program # +# args: additional arguments passed to the program (pathname) # +# # +# Return values (as defined by LSB exit codes): # +# 0 - program is running or service is OK # +# 1 - generic or unspecified error # +# 2 - invalid or excessive argument(s) # +# 5 - program is not installed # +################################################################################ +start_daemon() +{ + local force="" + local nice="0" + local pidfile="" + local pidlist="" + local retval="" + + # Process arguments + while true + do + case "${1}" in + + -f) + force="1" + shift 1 + ;; + + -n) + nice="${2}" + shift 2 + ;; + + -p) + pidfile="${2}" + shift 2 + ;; + + -*) + return 2 + ;; + + *) + program="${1}" + break + ;; + esac + done + + # Check for a valid program + if [ ! -e "${program}" ] + then + return 5 + fi + + # Execute + if [ -z "${force}" ] + then + if [ -z "${pidfile}" ] + then + # determine the pid by discovery + pidlist=`pidofproc "${1}"` + retval="${?}" + else + # The PID file contains the needed PIDs + # Note that by LSB requirement, the path must be given to pidofproc, + # however, it is not used by the current implementation or standard. + pidlist=`pidofproc -p "${pidfile}" "${1}"` + retval="${?}" + fi + + # return a value ONLY + # It is the init script's (or distribution's functions) responsibilty + # to log messages! + case "${retval}" in + + 0) + # program is already running correctly, this is a + # succesful start. + return 0 + ;; + + 1) + # program is not running, but an invalid pid file exists + # remove the pid file and continue + rm -f "${pidfile}" + ;; + + 3) + # program is not running and no pidfile exists + # do nothing here, let start_deamon continue. + ;; + + *) + # Others as returned by status values shall not be interpreted + # and returned as an unspecified error. + return 1 + ;; + esac + fi + + # do the start! + nice -n "${nice}" "${@}" + +} + +################################################################################ +# killproc() # +# Usage: killproc [-p pidfile] pathname [signal] # +# # +# Purpose: Send control signals to running processes # +# # +# Inputs: -p pidfile, uses the specified pidfile # +# pathname, pathname to the specified program # +# signal, send this signal to pathname # +# # +# Return values (as defined by LSB exit codes): # +# 0 - program (pathname) has stopped/is already stopped or a # +# running program has been sent specified signal and stopped # +# successfully # +# 1 - generic or unspecified error # +# 2 - invalid or excessive argument(s) # +# 5 - program is not installed # +# 7 - program is not running and a signal was supplied # +################################################################################ +killproc() +{ + local pidfile + local program + local prefix + local progname + local signal="-TERM" + local fallback="-KILL" + local nosig + local pidlist + local retval + local pid + local delay="30" + local piddead + local dtime + + # Process arguments + while true + do + case "${1}" in + + -p) + pidfile="${2}" + shift 2 + ;; + + *) + program="${1}" + if [ -n "${2}" ] + then + signal="${2}" + fallback="" + else + nosig=1 + fi + + # error on additional arguments + if [ -n "${3}" ] + then + return 2 + else + break + fi + ;; + esac + done + + # Check for a valid program + if [ ! -e "${program}" ] + then + return 5 + fi + + # Check for a valid signal + check_signal "${signal}" + if [ "${?}" != "0" ] + then + return 2 + fi + + # Get a list of pids + if [ -z "${pidfile}" ] + then + # determine the pid by discovery + pidlist=`pidofproc "${1}"` + retval="${?}" + else + # The PID file contains the needed PIDs + # Note that by LSB requirement, the path must be given to pidofproc, + # however, it is not used by the current implementation or standard. + pidlist=`pidofproc -p "${pidfile}" "${1}"` + retval="${?}" + fi + + # return a value ONLY + # It is the init script's (or distribution's functions) responsibilty + # to log messages! + case "${retval}" in + + 0) + # program is running correctly + # do nothing here, let killproc continue. + ;; + + 1) + # program is not running, but an invalid pid file exists + # remove the pid file. + rm -f "${pidfile}" + # this is only a success if no signal was passed. + if [ -n "${nosig}" ] + then + return 0 + else + return 7 + fi + ;; + + 3) + # program is not running and no pidfile exists + # this is only a success if no signal was passed. + if [ -n "${nosig}" ] + then + return 0 + else + return 7 + fi + ;; + + *) + # Others as returned by status values shall not be interpreted + # and returned as an unspecified error. + return 1 + ;; + esac + + # perform different actions for exit signals and control signals + check_sig_type "${signal}" + if [ "${?}" -eq "0" ] # signal is used to terminate the program + then + # account for empty pidlist (pid file still exists and nosignal was given) + if [ "${pidlist}" != "" ]; then + #kill the list of pids + for pid in ${pidlist} + do + kill -0 "${pid}" 2> /dev/null + if [ "${?}" -ne "0" ]; then + # process is dead, continue to next and assume all is well + continue + else + kill "${signal}" "${pid}" 2> /dev/null + # Wait up to ${delay}/10 seconds to for "${pid}" to + # terminate in 10ths of a second + while [ "${delay}" != "0" ] + do + kill -0 "${pid}" 2> /dev/null || piddead="1" + if [ "${piddead}" = "1" ] + then + break + fi + sleep 0.1 + delay="$(( ${delay} - 1 ))" + done + # If a fallback is set, and program is still running, then + # use the fallback + if [ -n "${fallback}" -a "${piddead}" != "1" ] + then + kill "${fallback}" "${pid}" 2> /dev/null + sleep 1 + # Check again, and fail if still running + kill -0 "${pid}" 2> /dev/null && return 1 + else + # just check one last time and if still alive, fail + sleep 1 + kill -0 "${pid}" 2> /dev/null && return 1 + fi + fi + done + fi + + # Check for and remove stale PID files. + if [ -z "${pidfile}" ] + then + #find the basename of $program + prefix=`echo "${program}" | sed 's/[^/]*$//'` + progname=`echo "${program}" | sed "s@${prefix}@@"` + if [ -e "/var/run/${progname}.pid" ] + then + rm -f "/var/run/${progname}.pid" 2> /dev/null + fi + else + if [ -e "${pidfile}" ] + then + rm -f "${pidfile}" 2> /dev/null + fi + fi + + # For signals that do not expect a program to exit, simply + # let kill do it's job, and evaluate kills return for value + else # check_sig_type - signal is not used to terminate program + for pid in ${pidlist} + do + kill "${signal}" "${pid}" + if [ "${?}" -ne "0" ]; then + return 1 + fi + done + fi +} + +################################################################################ +# pidofproc() # +# Usage: pidofproc [-p pidfile] pathname # +# # +# Purpose: This function returns one or more pid(s) for a particular daemon # +# # +# Inputs: -p pidfile, use the specified pidfile instead of pidof # +# pathname, path to the specified program # +# # +# Return values (as defined by LSB status codes): # +# 0 - Success (PIDs to stdout) # +# 1 - Program is dead, PID file still exists (remaining PIDs output) # +# 3 - Program is not running (no output) # +################################################################################ +pidofproc() +{ + +local pidfile +local program +local prefix +local progname +local pidlist +local lpids +local exitstatus="0" + + # Process arguments + while true + do + case "${1}" in + + -p) + pidfile="${2}" + shift 2 + ;; + + *) + program="${1}" + if [ -n "${2}" ] + then + # Too many arguments + # Since this is status, return unknown + return 4 + else + break + fi + ;; + esac + done + + # If a PID file is not specified, try and find one. + if [ -z "${pidfile}" ] + then + # get the program's basename + prefix=`echo "${program}" | sed 's/[^/]*$//'` + progname=`echo "${program}" | sed "s@${prefix}@@"` + # if a PID file exists with that name, assume that is it. + if [ -e "/var/run/${progname}.pid" ] + then + pidfile="/var/run/${progname}.pid" + fi + fi + + # if a PID file is set and exists, use it. + if [ -n "${pidfile}" -a -e "${pidfile}" ] + then + # use the value in the first line of the pidfile + pidlist=`/bin/head -n1 "${pidfile}"` + # This can optionally be written as 'sed 1q' to repalce 'head -n1' + # should LFS move /bin/head to /usr/bin/head + else + # use pidof + pidlist=`pidof "${program}"` + fi + + # Figure out if all listed PIDs are running. + for pid in ${pidlist} + do + kill -0 ${pid} 2> /dev/null + if [ "${?}" = "0" ]; then + lpids="${pids}${pid} " + else + exitstatus="1" + fi + done + + if [ -z "${lpids}" -a ! -f "${pidfile}" ]; then + return 3 + else + echo "${lpids}" + return "${exitstatus}" + fi +} +################################################################################ +# log_success_msg() # +# Usage: log_success_msg [$MESSAGE | "message"] # +# # +# Purpose: Print a successful status message to the screen and optionally # +# a boot log file. # +# # +# Inputs: accepts one string value, either a quoted string or optionally # +# the value of $MESSAGE if set in the running environment. # +# # +# Return values: Not used # +################################################################################ +log_success_msg() +{ + echo -n -e "${PREFIX_SUCCESS}${@}" + echo -e "${SET_COL}${BRACKET}[${SUCCESS} OK ${BRACKET}]${NORMAL}" + if [ "${BOOTLOG_ENAB}" = "yes" ]; then + if [ $( hostname ) = "(none)" ]; then + BTTIMESPEC="" + else + BTTIMESPEC="$(echo `date +"%b %d %T"` `hostname`) " + fi + echo "${BTTIMESPEC}bootlog: ${@} Successful" >> "${TEMPFS_MOUNT}/.bootlog" + fi + return 0 +} + +################################################################################ +# log_failure_msg() # +# Usage: log_failure_msg [$MESSAGE | "message"] # +# # +# Purpose: Print a failure status message to the screen and optionally # +# a boot log file. # +# # +# Inputs: accepts one string value, either a quoted string or optionally # +# the value of $MESSAGE if set in the running environment. # +# # +# Return values: Not used # +################################################################################ +log_failure_msg() +{ + echo -n -e "${PREFIX_FAILURE}${@}" + echo -e "${SET_COL}${BRACKET}[${FAILURE} FAIL ${BRACKET}]${NORMAL}" + if [ "${BOOTLOG_ENAB}" = "yes" ]; then + if [ $( hostname ) = "(none)" ]; then + BTTIMESPEC="" + else + BTTIMESPEC="$(echo `date +"%b %d %T"` `hostname`) " + fi + echo "${BTTIMESPEC}bootlog: ${@} Failed!" >> "${TEMPFS_MOUNT}/.bootlog" + fi + return 0 +} + +################################################################################ +# log_warning_msg() # +# Usage: log_warning_msg [$MESSAGE | "message"] # +# # +# Purpose: Print a warning status message to the screen and optionally # +# a boot log file. # +# # +# Inputs: accepts one string value, either a quoted string or optionally # +# the value of $MESSAGE if set in the running environment. # +# # +# Return values: Not used # +################################################################################ +log_warning_msg() +{ + echo -n -e "${PREFIX_WARNING}${@}" + echo -e "${SET_COL}${BRACKET}[${WARNING} WARN ${BRACKET}]${NORMAL}" + if [ "${BOOTLOG_ENAB}" = "yes" ]; then + if [ $( hostname ) = "(none)" ]; then + BTTIMESPEC="" + else + BTTIMESPEC="$(echo `date +"%b %d %T"` `hostname`) " + fi + echo "${BTTIMESPEC}bootlog: ${@} Warning" >> "${TEMPFS_MOUNT}/.bootlog" + fi + return 0 +} + +################################################################################ +# check_signal() # +# Usage: check_signal [ -{signal} | {signal} ] # +# # +# Purpose: Check for a valid signal. This is not defined by any LSB draft, # +# however, it is required to check the signals to determine if the # +# signals chosen are invalid arguments to the other functions. # +# # +# Inputs: accepts a single string value in the form or -{signal} or {signal} # +# # +# Return values: # +# 0 - Success (signal is valid # +# 1 - Signal is not valid # +################################################################################ +check_signal() +{ + local valsig + + # Add error handling for invalid signals + valsig="-ALRM -HUP -INT -KILL -PIPE -POLL -PROF -TERM -USR1 -USR2" + valsig="${valsig} -VTALRM -STKFLT -PWR -WINCH -CHLD -URG -TSTP -TTIN" + valsig="${valsig} -TTOU -STOP -CONT -ABRT -FPE -ILL -QUIT -SEGV -TRAP" + valsig="${valsig} -SYS -EMT -BUS -XCPU -XFSZ -0 -1 -2 -3 -4 -5 -6 -8 -9" + valsig="${valsig} -11 -13 -14 -15" + + echo "${valsig}" | grep -- " ${1} " > /dev/null + if [ "${?}" = "0" ] + then + return 0 + else + return 1 + fi +} + + +################################################################################ +# check_sig_type() # +# Usage: check_signal [ -{signal} | {signal} ] # +# # +# Purpose: Check if signal is a program termination signal or a control signal # +# This is not defined by any LSB draft, however, it is required to # +# check the signals to determine if they are intended to end a # +# program or simply to control it. # +# # +# Inputs: accepts a single string value in the form or -{signal} or {signal} # +# # +# Return values: # +# 0 - Signal is used for program termination # +# 1 - Signal is used for program control # +################################################################################ +check_sig_type() +{ + local valsig + + # The list of termination signals (limited to generally used items) + valsig="-ALRM -INT -KILL -TERM -PWR -STOP -ABRT -QUIT -2 -3 -6 -9 -14 -15" + + echo "${valsig}" | grep -- " ${1} " > /dev/null + if [ "${?}" = "0" ] + then + return 0 + else + return 1 + fi +} + +# End /lib/lsb/init-functions diff --git a/bootscripts/contrib/lsb-v3/lsb/manage-functions b/bootscripts/contrib/lsb-v3/lsb/manage-functions new file mode 100644 index 000000000..7c7a8f495 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/lsb/manage-functions @@ -0,0 +1,306 @@ +#!/bin/bash +# Begin /lib/lsb/manage-functions + +# /lib/lsb/manage-functions contains the functions used by +# /lib/lsb/install_initd and /lib/lsb/remove_initd as well as additional helper +# functions for use in programs that would provide functionality similar to +# the RedHat chkconfig utility, for instance. + +# source the confif file +. /etc/lsb/lsb-config + +# Define all arrays at script start to avoid scope issues +# scriptlist is a list of valid scripts used as an index +declare -a scriptlist +# fullheaders is a complete set of valid LSB headers, stored in memory for +# each indexed script, to avoid multiple disk reads +declare -a fullheaders + +############################################################################### +# get_headers() - Obtains a valid list of scripts contained in ${rcbase} and # +# inserts the name of the script into the scriptlist[] array # +# for use by all other functions. Additionally, it inserts # +# the entire LSB header information from each script into a # +# second array, fullheaders[], so that diskreads need only be # +# done once # +# Returns no value, but populates the variable ${scriptcount} # +# and the arrays ${scriptlist} and ${fullheaders} for use # +# with other functions in this script. This function is # +# called unconditionally at the end of this scrip and is # +# provided as a function only for the case that it needs to # +# be called again after other operations. # +############################################################################### +get_headers() +{ + echo -n "Retrieving script information from disk..." + count=1 + for file in $(find -P /etc/init.d -xdev -perm -u=x | sed -n 2~1p \ + | sed "s@/etc/init.d/rc@@") + do + # determine if script is an LSB compliant script + grep "### BEGIN INIT INFO" $file > /dev/null + if test $? -gt "0" + then + # this is not a valid script and is ignored + # skip the rest of the loop + continue + fi + # determine basename using only bash (is basename a builtin?) + filename=$(echo "${file}" | sed "s@${rcbase}/@@") + # assign it to an array possition + scriptlist["${count}"]="${filename}" + # find the begining of the init info for the script + begin=$(grep -n "### BEGIN INIT INFO" "${file}" | cut -d: -f1) + # find the end of the init info for the script + end=$(grep -n "### END INIT INFO" "${file}" | cut -d: -f1) + # we'll use the difference between the values in the tail command + diff=$(( ${end} - ${begin} )) + # assign the entire LSB header information as a single string to the + # fullheaders[] array + fullheaders["${count}"]=$(head -n "${end}" "${file}" \ + | tail -n "${diff}") + count=$(( ${count} + 1 )) + unset begin + unset end + unset diff + unset filename + done + # a number or array elements would be a nice regular variable assignment + scriptcount="${#scriptlist[@]}" + unset count + echo -e "Completed!" +} + +############################################################################### +# print_headers() - Presents a formatted list of all LSB compliant script # +# headers to stdout preceeded by script name for use in # +# other scripts # +############################################################################### +print_headers() +{ + get_headers + count=1 + while test "${count}" -lt "${scriptcount}" + do + echo "${scriptlist[$count]}" + echo "=============================================================" + echo "${fullheaders[$count]}" + echo "" + echo "" + count="$(( ${count} + 1 ))" + done +} + +############################################################################### +# get_index() - Determines the array index of the specified script # +############################################################################### + +get_index() +{ + filename=$(echo "${1}" | sed "s@${rcbase}/@@") + count=1 + while test "${count}" -lt "${scriptcount}" + do + echo "${scriptlist[${count}]}" | grep "${filename}" > /dev/null + if test "${?}" -ne "0" + then + count=$(( ${count} + 1 )) + continue + else + break + fi + done + if test "${filename}" == "${scriptlist[${count}]}" + then + echo "${count}" + else + echo "${1} is not a valid LSB init script." + exit 1 + fi + unset filename + unset count +} + +############################################################################### +# get_lsb_value() - Obtains the LSB Value of $1 for index of script ($2). # +############################################################################### +get_lsb_value() +{ + # Probably need some error checking in here + echo "${fullheaders[${2}]}" | \ + grep "^# ${1}" | \ + sed -e "s@# ${1}:@@" \ + -e "s/^[ \t]*//" +} + +############################################################################### +# convert_lsb_required() - Converts LSB defined facilities (facility names # +# begining with a '$' character) into script names # +# for required start/stop # +############################################################################### +convert_lsb_required() +{ + local count=0 + local provides="" + local reqfacility="" + local reqprovideslist="" + + for reqfacility in $@ + do + # find the requires and it's index and then find the script name + # from the index. Since this is required, exit if it is not found + ## If reqfacility is already in script name format, nothing needs to + ## be done, just echo it back out. I can't think of an easy way to + ## do this right now, the scriptname will be the same as the provides + ## anyway, so just let it fly for now...it'll be correct, it just + ## takes an extra couple of commands to get the same result. + ## Besides, this will do some extra sanity checking in case somebody + ## writes a script that isn't named the same as provides, though this + ## isn't LSB compliant. Additionally, these same comments apply to + ## the convert_lsb_should() fucntion below. + count=0 + while test ${count} -lt ${scriptcount} + do + count=$(( $count + 1 )) + provides="$( get_lsb_value Provides ${count} )" + if test "${provides}" = "${reqfacility}" + then + reqprovideslist="${reqprovideslist} ${scriptlist[$count]}" + break + fi + if test ${count} -eq ${scriptcount}; then + # If we've never broken out of the while loop, then this is an + # unrecoverable error since it is a required item. Exit now! + echo "Error: unable to locate required facility ${reqfacility}!" + exit 5 + fi + done + done + echo "${reqprovideslist}" | sed -e "s/^[ \t]*//" -e "s/^[ \t]*//" +} + +############################################################################### +# convert_lsb_should() - Converts LSB defined facilities (facility names # +# begining with a '$' character) into script names for # +# should start/stop # +############################################################################### + +convert_lsb_should() +{ + local count=0 + local provides="" + local optfacility="" + local optprovideslist="" + + for optfacility in $@ + do + # find the should and it's index and then find the script name + # from the index. Since this is not an error, simply warn if it + # is not found. + count=0 + while test ${count} -lt ${scriptcount} + do + count=$(( $count + 1 )) + provides="$( get_lsb_value Provides ${count} )" + if test "${provides}" = "${optfacility}" + then + optprovideslist="${optprovideslist} ${scriptlist[$count]}" + break + fi + # No need to error or warn on should items, and it's messy if so! + done + done + echo "${optprovideslist}" | sed -e "s/^[ \t]*//" -e "s/[ \t]*$//" +} + +get_headers + +############################################################################### +# get_lsb_required_value() - Additional function to simplify repetitive tasks # +# Obtains the LSB Value of $1 for index of script # +# ($2) and immediately converts LSB defined # +# facilities (beginning with a '$' character) to a # +# script name. If the script is not found, then # +# the function exits with an error as per # +# convert_lsb_required. # +############################################################################### +get_lsb_required_value() +{ + local reqval + # Probably need some error checking in here + reqval=`echo "${fullheaders[${2}]}" | \ + grep "^# ${1}" | \ + sed -e "s@# ${1}:@@" \ + -e "s/^[ \t]*//"` + + # If $reqval contains a '$' charcter, then convert it to a script name + echo "${reqval}" | grep "\\$" 2>&1 > /dev/null + if test "${?}" -eq "0" + then + reqval=`convert_lsb_required "${reqval}"` + fi + echo "${reqval}" +} + +############################################################################### +# get_lsb_should_value() - Additional function to simplify repetitive tasks # +# Obtains the LSB Value of $1 for index of script # +# ($2) and immediately converts LSB defined # +# facilities (beginning with a '$' character) to a # +# script name. If the script is not found, the # +# value is removed from the list as it is optional. # +############################################################################### +get_lsb_should_value() +{ + local optval + local listitem + local optitem + # Probably need some error checking in here + optval=`echo "${fullheaders[${2}]}" | \ + grep "^# ${1}" | \ + sed -e "s@# ${1}:@@" \ + -e "s/^[ \t]*//"` + + # If $optval contains a '$' charcter, then convert it to a script name + echo "${optval}" | grep "\\$" 2>&1 > /dev/null + if test "${?}" -eq "0" + then + optval=`convert_lsb_should "${optval}"` + # if we still have a "$" character, then it's not found and it should + # be removed from the list (and it's trailing space if one exists) + # since it is optional + echo "${optval}" | grep "\\$" 2>&1 > /dev/null + if test "${?}" -eq "0" + then + # Remove the value + for listitem in ${optval} + do + echo "${listitem}" | grep "\\$" + if test "${?}" -eq "0" + then + optval=`echo "${optval}" | sed -e 's@${listitem} @@' \ + -e 's@${listitem}@@' | \ + sed -e "s@# ${1}:@@" \ + -e "s/^[ \t]*//"` + fi + done + fi + fi + # If a should start value does not have a script associted with it, then + # remove it (or it and trailing space) from the list + for optitem in ${otpval} + do + grep "${optitem}" "${statedir}/enabled-scripts" 2>&1 > /dev/null + if test "${?}" -ne "0" + then + optval=`echo "${optval}" | sed -e 's@${otpitem} @@' \ + -e 's@${optitem}@@' | \ + sed -e "s@# ${1}:@@" \ + -e "s/^[ \t]*//"` + fi + done + + echo "${optval}" +} + +# End /lib/lsb/manage-functions diff --git a/bootscripts/contrib/lsb-v3/sysconfig/createfiles b/bootscripts/contrib/lsb-v3/sysconfig/createfiles new file mode 100644 index 000000000..8d1f89dc6 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/sysconfig/createfiles @@ -0,0 +1,28 @@ +######################################################################## +# Begin /etc/sysconfig/createfiles +# +# Description : Createfiles script config file +# +# Authors : +# +# Version : 00.00 +# +# Notes : The syntax of this file is as follows: +# if type is equal to "file" or "dir" +# <filename> <type> <permissions> <user> <group> +# if type is equal to "dev" +# <filename> <type> <permissions> <user> <group> <devtype> <major> <minor> +# +# <filename> is the name of the file which is to be created +# <type> is either file, dir, or dev. +# file creates a new file +# dir creates a new directory +# dev creates a new device +# <devtype> is either block, char or pipe +# block creates a block device +# char creates a character deivce +# pipe creates a pipe, this will ignore the <major> and <minor> fields +# <major> and <minor> are the major and minor numbers used for the device. +######################################################################## + +# End /etc/sysconfig/createfiles diff --git a/bootscripts/contrib/lsb-v3/sysconfig/modules b/bootscripts/contrib/lsb-v3/sysconfig/modules new file mode 100644 index 000000000..1c8493d45 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/sysconfig/modules @@ -0,0 +1,18 @@ +######################################################################## +# Begin /etc/sysconfig/modules +# +# Description : Module auto-loading configuration +# +# Authors : +# +# Version : 00.00 +# +# Notes : The syntax of this file is as follows: +# <module> [<arg1> <arg2> ...] +# +# Each module should be on it's own line, and any options that you want +# passed to the module should follow it. The line deliminator is either +# a space or a tab. +######################################################################## + +# End /etc/sysconfig/modules diff --git a/bootscripts/contrib/lsb-v3/sysconfig/network-devices/ifdown b/bootscripts/contrib/lsb-v3/sysconfig/network-devices/ifdown new file mode 100644 index 000000000..28d1f1813 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/sysconfig/network-devices/ifdown @@ -0,0 +1,93 @@ +#!/bin/sh +######################################################################## +# Begin $NETWORK_DEVICES/ifdown +# +# Description : Interface Down +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.01 +# +# Notes : the IFCONFIG variable is passed to the scripts found +# in the services directory, to indicate what file the +# service should source to get environmental variables. +# +######################################################################## + +. /lib/lsb/init-functions + +# Collect a list of configuration files for our interface +if [ -n "${2}" ]; then + for file in ${@#$1}; do # All parameters except $1 + FILES="${FILES} ${NETWORK_DEVICES}/ifconfig.${1}/${file}" + done +elif [ -d "${NETWORK_DEVICES}/ifconfig.${1}" ]; then + FILES=`echo ${NETWORK_DEVICES}/ifconfig.${1}/*` +else + FILES="${NETWORK_DEVICES}/ifconfig.${1}" +fi + +# Reverse the order configuration files are processed in +for file in ${FILES}; do + FILES2="${file} ${FILES2}" +done +FILES=${FILES2} + +# Process each configuration file +for file in ${FILES}; do + # skip backup files + if [ "${file}" != "${file%""~""}" ]; then + continue + fi + + if [ ! -f "${file}" ]; then + message="${file} is not a network configuration file or directory." + log_warning_msg + fi + ( + . ${file} + + # Will not process this service if started by boot, and ONBOOT + # is not set to yes + if [ "${IN_BOOT}" = "1" -a "${ONBOOT}" != "yes" ]; then + continue + fi + + # Will not process this service if started by hotplug, and + # ONHOTPLUG is not set to yes + if [ "${IN_HOTPLUG}" = "1" -a "${ONHOTPLUG}" != "yes" ]; then + continue + fi + + # This will run the service script, if SERVICE is set + if [ -n "${SERVICE}" -a -x "${NETWORK_DEVICES}/services/${SERVICE}" ]; then + if ip link show ${1} > /dev/null 2>&1 + then + IFCONFIG=${file} ${NETWORK_DEVICES}/services/${SERVICE} ${1} down + else + message="Interface ${1} doesn't exist." + log_warning_msg + fi + else + echo -e "${FAILURE}Unable to process ${file}. Either" + echo -e "${FAILURE}the SERVICE variable was not set," + echo -e "${FAILURE}or the specified service cannot be executed." + message="" + log_failure_msg + fi + ) +done + +if [ -z "${2}" ]; then + link_status=`ip link show $1` + if [ -n "${link_status}" ]; then + if echo "${link_status}" | grep -q UP; then + message="Bringing down the ${1} interface..." + ip link set ${1} down + evaluate_retval standard + fi + fi +fi + +# End $NETWORK_DEVICES/ifdown diff --git a/bootscripts/contrib/lsb-v3/sysconfig/network-devices/ifup b/bootscripts/contrib/lsb-v3/sysconfig/network-devices/ifup new file mode 100644 index 000000000..50e173ca6 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/sysconfig/network-devices/ifup @@ -0,0 +1,87 @@ +#!/bin/sh +######################################################################## +# Begin $NETWORK_DEVICES/ifup +# +# Description : Interface Up +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : the IFCONFIG variable is passed to the scripts found +# in the services directory, to indicate what file the +# service should source to get environmental variables. +# +######################################################################## + +. /lib/lsb/init-functions + +# Collect a list of configuration files for our interface +if [ -n "${2}" ]; then + for file in ${@#$1} # All parameters except $1 + do + FILES="${FILES} ${NETWORK_DEVICES}/ifconfig.${1}/${file}" + done +elif [ -d "${NETWORK_DEVICES}/ifconfig.${1}" ]; then + FILES=`echo ${NETWORK_DEVICES}/ifconfig.${1}/*` +else + FILES="${NETWORK_DEVICES}/ifconfig.${1}" +fi + +message="Bringing up the ${1} interface..." + +# Process each configruation file +for file in ${FILES}; do + # skip backup files + if [ "${file}" != "${file%""~""}" ]; then + continue + fi + + if [ ! -f "${file}" ]; then + log_warning_msg + message="${file} is not a network configuration file or directory." + log_warning_msg + fi + + ( + . ${file} + + # Will not process this service if started by boot, and ONBOOT + # is not set to yes + if [ "${IN_BOOT}" = "1" -a "${ONBOOT}" != "yes" ]; then + continue + fi + # Will not process this service if started by hotplug, and + # ONHOTPLUG is not set to yes + if [ "${IN_HOTPLUG}" = "1" -a "${ONHOTPLUG}" != "yes" -a "${HOSTNAME}" != "(none)" ]; then + continue + fi + + if [ -n "${SERVICE}" -a -x "${NETWORK_DEVICES}/services/${SERVICE}" ]; then + if [ -z "${CHECK_LINK}" -o "${CHECK_LINK}" = "y" -o "${CHECK_LINK}" = "yes" -o "${CHECK_LINK}" = "1" ]; then + if ip link show ${1} > /dev/null 2>&1; then + link_status=`ip link show ${1}` + if [ -n "${link_status}" ]; then + if ! echo "${link_status}" | grep -q UP; then + ip link set ${1} up + evaluate_retval standard + fi + fi + else + message="${message}Interface ${1} doesn't exist." + log_warning_msg + fi + fi + IFCONFIG=${file} ${NETWORK_DEVICES}/services/${SERVICE} ${1} up + else + echo -e "${FAILURE}Unable to process ${file}. Either" + echo -e "${FAILURE}the SERVICE variable was not set," + echo -e "${FAILURE}or the specified service cannot be executed." + message="" + log_failure_msg + fi + ) +done + +# End $NETWORK_DEVICES/ifup diff --git a/bootscripts/contrib/lsb-v3/sysconfig/network-devices/services/ipv4-static b/bootscripts/contrib/lsb-v3/sysconfig/network-devices/services/ipv4-static new file mode 100644 index 000000000..417d22de6 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/sysconfig/network-devices/services/ipv4-static @@ -0,0 +1,80 @@ +#!/bin/sh +######################################################################## +# Begin $NETWORK_DEVICES/services/ipv4-static +# +# Description : IPV4 Static Boot Script +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /lib/lsb/init-functions +. ${IFCONFIG} + +if [ -z "${IP}" ]; then + log_failure_msg "IP variable missing from ${IFCONFIG}, cannot continue." + exit 1 +fi + +if [ -z "${PREFIX}" -a -z "${PEER}" ]; then + log_warning_msg "PREFIX variable missing from ${IFCONFIG}, assuming 24." + PREFIX=24 + args="${args} ${IP}/${PREFIX}" +elif [ -n "${PREFIX}" -a -n "${PEER}" ]; then + log_failure_msg "PREFIX and PEER both specified in ${IFCONFIG}, cannot continue." + exit 1 +elif [ -n "${PREFIX}" ]; then + args="${args} ${IP}/${PREFIX}" +elif [ -n "${PEER}" ]; then + args="${args} ${IP} peer ${PEER}" +fi + +if [ -n "${BROADCAST}" ]; then + args="${args} broadcast ${BROADCAST}" +fi + +if [ -n "${SOURCE}" ]; then + args="${args} src ${SOURCE}" +fi + +case "${2}" in + up) + MESSAGE="Adding IPv4 address ${IP} to the ${1} interface..." + ip addr add ${args} dev ${1} + evaluate_retval + + if [ -n "${GATEWAY}" ]; then + if ip route | grep -q default; then + log_warning_msg "Gateway already setup; skipping." ${WARNING} + else + MESSAGE="Setting up default gateway..." + ip route add default via ${GATEWAY} dev ${1} + evaluate_retval + fi + fi + ;; + + down) + if [ -n "${GATEWAY}" ]; then + MESSAGE="Removing default gateway..." + ip route del default + evaluate_retval + fi + + MESSAGE="Removing IPv4 address ${IP} from the ${1} interface..." + ip addr del ${args} dev ${1} + evaluate_retval + ;; + + *) + echo "Usage: ${0} [interface] {up|down}" + exit 1 + ;; +esac + +# End $NETWORK_DEVICES/services/ipv4-static diff --git a/bootscripts/contrib/lsb-v3/sysconfig/network-devices/services/ipv4-static-route b/bootscripts/contrib/lsb-v3/sysconfig/network-devices/services/ipv4-static-route new file mode 100644 index 000000000..4205a022d --- /dev/null +++ b/bootscripts/contrib/lsb-v3/sysconfig/network-devices/services/ipv4-static-route @@ -0,0 +1,92 @@ +#!/bin/sh +######################################################################## +# Begin $NETWORK_DEVICES/services/ipv4-static-route +# +# Description : IPV4 Static Route Script +# +# Authors : Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /lib/lsb/init-functions +. ${IFCONFIG} + +case "${TYPE}" in + ("" | "network") + need_ip=1 + need_gateway=1 + ;; + + ("default") + need_gateway=1 + args="${args} default" + desc="default" + ;; + + ("host") + need_ip=1 + ;; + + ("unreachable") + need_ip=1 + args="${args} unreachable" + desc="unreachable " + ;; + + (*) + boot_mesg "Unknown route type (${TYPE}) in ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + ;; +esac + +if [ -n "${need_ip}" ]; then + if [ -z "${IP}" ]; then + boot_mesg "IP variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + + if [ -z "${PREFIX}" ]; then + boot_mesg "PREFIX variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + + args="${args} ${IP}/${PREFIX}" + desc="${desc}${IP}/${PREFIX}" +fi + +if [ -n "${need_gateway}" ]; then + if [ -z "${GATEWAY}" ]; then + boot_mesg "GATEWAY variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + args="${args} via ${GATEWAY}" +fi + +case "${2}" in + up) + boot_mesg "Adding '${desc}' route to the ${1} interface..." + ip route add ${args} dev ${1} + evaluate_retval + ;; + + down) + boot_mesg "Removing '${desc}' route from the ${1} interface..." + ip route del ${args} dev ${1} + evaluate_retval + ;; + + *) + echo "Usage: ${0} [interface] {up|down}" + exit 1 + ;; +esac + +# End $NETWORK_DEVICES/services/ipv4-static-route diff --git a/bootscripts/contrib/lsb-v3/sysconfig/rc b/bootscripts/contrib/lsb-v3/sysconfig/rc new file mode 100644 index 000000000..ffb70d98c --- /dev/null +++ b/bootscripts/contrib/lsb-v3/sysconfig/rc @@ -0,0 +1,52 @@ +# Begin /etc/sysconfig/rc + +# Author: DJ Lucas - dj@linuxfromscratch.org +# Version: 1.0 LSB V.3.1 + +# Global variable inherited by initscripts are in caps +# Local variables for the rc script are in lowercase + +# Source site specific rc configuration +. /etc/sysconfig/rc.site + +# This sets default terminal options. +# stty sane - this has been removed as nobody recalls +# the reason for it in the first place - if no problems arize, +# then it will be removed completely at a later date. + +# Setup default values for the environment +umask 022 +PATH="/bin:/sbin" + +# Find current screen size +if [ -z "${COLUMNS}" ]; then + COLUMNS=$(stty size) + COLUMNS=${COLUMNS##* } +fi + +# When using remote connections, such as a serial port, stty size returns 0 +if [ "${COLUMNS}" = "0" ]; then + COLUMNS=80 +fi + +## Measurements for positioning result messages +COL=$((${COLUMNS} - 8)) +WCOL=$((${COL} - 2)) + +# Set Cursur Position Commands, used via echo -e +SET_COL="\\033[${COL}G" # at the $COL char +SET_WCOL="\\033[${WCOL}G" # at the $WCOL char +CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char + +# Bootlogging and interactive startup require a valid tempfs mount +# if this mount is not present, disable them +if [ "${TEMPFS_MOUNT}" = "" -o ! -d "${TEMPFS_MOUNT}" ]; then + TEMPFS_MOUNT="" + iprompt="" + BOOTLOG_ENAB="" +fi + +# Export the environment variables so they are inherited by the scripts +export PATH SET_COL SET_WCOL CURS_UP TEMPFS_MOUNT BOOTLOG_ENAB RUNLEVEL + +# End /etc/sysconfig/rc diff --git a/bootscripts/contrib/lsb-v3/sysconfig/rc.site b/bootscripts/contrib/lsb-v3/sysconfig/rc.site new file mode 100644 index 000000000..cf58e2fd7 --- /dev/null +++ b/bootscripts/contrib/lsb-v3/sysconfig/rc.site @@ -0,0 +1,69 @@ +# Set base directory information +RC_BASE="/etc" +RC_FUNCTIONS="${RC_BASE}/init.d/lfs-functions" + +# Location of network device scripts and config files +NETWORK_DEVICES="/etc/sysconfig/network-devices" + +# Directory to store boot process accounting information +# Used for boot logging and interactive flag when rootfs +# is not writable +TEMPFS_MOUNT="${RC_BASE}/init.d/boottemp" + +# Bootlogging (requires a tempfs mount) +BOOTLOG_ENAB="yes" + +# Distro Information +DISTRO="Linux From Scratch" # The distro name +DISTRO_CONTACT="lfs-dev@linuxfromscratch.org" # Bug report address +DISTRO_MINI="lfs" # Short name used in filenames for distro config + +# Define custom colors used in messages printed to the screen +BRACKET="\\033[1;34m" # Blue +FAILURE="\\033[1;31m" # Red +INFO="\\033[1;36m" # Cyan +NORMAL="\\033[0;39m" # Grey +SUCCESS="\\033[1;32m" # Green +WARNING="\\033[1;33m" # Yellow + +# Prefix boot messages for easier reading on framebuffer consoles +PREFIX_SUCCESS=" ${SUCCESS}*${NORMAL} " +PREFIX_WARNING="${WARNING}**${NORMAL} " +PREFIX_FAILURE="${FAILURE}***${NORMAL}" + +# Export varialbles so that they are inherited by the initscripts +export RC_BASE RC_FUNCTIONS NETWORK_DEVICES TEMPFS_MOUNT BOOTLOG_ENAB +export DISTRO DISTRO_CONTACT DISTRO_MINI +export BRACKET FAILURE INFO NORMAL SUCCESS WARNING +export PREFIX_SUCCESS PREFIX_WARNING PREFIX_FAILURE + +# Interactive startup +iprompt="yes" # Wether to display the interactive boot promp +itime="2" # The ammount of time (in seconds) to display the prompt +dlen="29" # The total length of the distro welcome string +ilen="38" # The total length of the interactive message +welcome_message="Welcome to ${INFO}${DISTRO}${NORMAL}" +i_message="Press '${FAILURE}I${NORMAL}' to enter interactive startup" + +# Error message displayed when a script's exit value is not zero +print_error_msg() +{ + # ${link} and ${error_value} are defined by the rc script + echo -e "${FAILURE}FAILURE: You should not be reading this error message." + echo -e "" + echo -e -n "${FAILURE}It means that an unforseen error took place in" + echo -e -n "${INFO} ${link}" + echo -e "${FAILURE}," + echo -e "${FAILURE}which exited with a return value of ${error_value}." + echo -e "" + echo -e -n "${FAILURE}If you are able to track this error down to a bug" + echo -e "${FAILURE}in one of the files" + echo -e -n "provided by ${INFO}${DISTRO}${FAILURE}, " + echo -e -n "${FAILURE}please be so kind to inform us at " + echo -e "${INFO}${DISTRO_CONTACT}${FAILURE}.${NORMAL}" + echo -e "" + echo -e "${INFO}Press Enter to continue..." + echo -e "${NORMAL}" + read ENTER +} + diff --git a/bootscripts/contrib/lsb/Makefile b/bootscripts/contrib/lsb/Makefile new file mode 100644 index 000000000..445608164 --- /dev/null +++ b/bootscripts/contrib/lsb/Makefile @@ -0,0 +1,11 @@ +ETCDIR=/etc +EXTDIR=${DESTDIR}${ETCDIR} +MODE=754 +DIRMODE=755 +CONFMODE=644 + +install: + install -d -m ${DIRMODE} ${DESTDIR}/lib/lsb + install -m ${CONFMODE} lib/init-functions ${DESTDIR}/lib/lsb + +.PHONY: install diff --git a/bootscripts/contrib/lsb/lib/init-functions b/bootscripts/contrib/lsb/lib/init-functions new file mode 100644 index 000000000..3f1ec2400 --- /dev/null +++ b/bootscripts/contrib/lsb/lib/init-functions @@ -0,0 +1,348 @@ + +#******************************************************************************* +# Function - start_daemon [-f] [-n nicelevel] [-p pidfile] pathname [args] +# +# Purpose: This runs the specified program as a daemon +# +# Inputs: -f, run the program even if it is already running +# -n nicelevel, specifies a nice level. See nice(1). +# -p pidfile, uses the specified pidfile +# pathname, pathname to the specified program +# args, arguments to pass to specified program +# +# Outputs: return 0 - Success +# return 2 - Invalid or excessive number of arguments, +# warning in stdout +# return 4 - Program or service status is unknown +# +# Dependencies: nice +# +# Todo: none +# +#******************************************************************************* +start_daemon() +{ + local pidfile="" + local forcestart="" + local nicelevel="0" + + while true + do + case "${1}" in + -f) + forcestart="1" + shift 1 + ;; + -n) + nicelevel="${2}" + shift 2 + ;; + -p) + pidfile="${2}" + shift 2 + ;; + -*) + log_failure_msg "Unknown Option: ${1}" + return 2 + ;; + *) + break + ;; + esac + done + + if [ -z "${forcestart}" ]; then + if [ -z "${pidfile}" ]; then + pidofproc "${1}" > /dev/null + else + pidofproc -p "${pidfile}" "${1}" > /dev/null + fi + + case "${?}" in + 0) + log_warning_msg "Unable to continue: ${1} is running" + return 4 + ;; + 1) + log_warning_msg "Unable to continue: ${pidfile} exists" + return 4 + ;; + 3) + ;; + *) + log_failure_msg "Unknown error code from pidofproc: ${?}" + return 4 + ;; + esac + fi + + nice -n "${nicelevel}" "${@}" +} + +#******************************************************************************* +# Function - killproc [-p pidfile] pathname [signal] +# +# Purpose: +# +# Inputs: -p pidfile, uses the specified pidfile +# pathname, pathname to the specified program +# signal, send this signal to pathname +# +# Outputs: return 0 - Success +# return 1 - Invalid or excessive number of arguments, +# warning in stdout +# return 4 - Unknown Status +# +# Dependencies: kill +# +# Todo: test +# +#******************************************************************************* +killproc() +{ + local pidfile="" + local killsig="" + local pidlist="" + while true + do + case "${1}" in + -p) + pidfile="${2}" + shift 2 + ;; + -*) + log_failure_msg "Unknown Option: ${1}" + return 1 + ;; + *) + break + ;; + esac + done + + if [ "${#}" = "2" ]; then + killsig="${2}" + elif [ "${#}" != "1" ]; then + shift 2 + log_failure_msg "Excess Arguments: $@" + return 1 + fi + + if [ -z "${pidfile}" ]; then + pidlist=`pidofproc "${1}"` + else + pidlist=`pidofproc -p "${pidfile}" "${1}"` + fi + + for pid in ${pidlist} + do + kill -${killsig:-TERM} ${pid} 2> /dev/null + if [ -z "${killsig}" ]; then + # Wait up to 3 seconds, for ${pid} to terminate + local dtime=3 + while [ "${dtime}" != "0" ] + do + kill -0 ${pid} 2> /dev/null || break + sleep 1 + dtime=$(( ${dtime} - 1)) + done + # If ${pid} is still running, kill it + kill -0 ${pid} 2> /dev/null && kill -KILL ${pid} 2> /dev/null + fi + done + + if [ -z "${killsig}" ]; then + pidofproc "${1}" 2>&1 > /dev/null + + # Program was terminated + if [ "$?" != "0" ]; then + # Pidfile Exists + if [ -f "${pidfile}" ]; then + rm -f "${pidfile}" 2>&1 > /dev/null + fi + return 0 + else # Program is still running + return 4 # Unknown Status + fi + else + if [ -z "${pidfile}" ]; then + pidofproc "${1}" 2> /dev/null + else + pidofproc -p "${pidfile}" "${1}" 2> /dev/null + fi + fi +} + +#******************************************************************************* +# Function - pidofproc [-p pidfile] pathname +# +# Purpose: This function returns one or more pid(s) for a particular daemon +# +# Inputs: -p pidfile, use the specified pidfile instead of pidof +# pathname, path to the specified program +# +# Outputs: return 0 - Success, pid's in stdout +# return 1 - Invalid or excessive number of arguments, +# warning in stdout +# return 1 - Program is dead, pidfile exists +# return 3 - Program is not running +# +# Dependencies: pidof, echo +# +# Todo: - Invalid or excessive argments, and program is dead pidfile exists +# conflict with eachother +# +#******************************************************************************* +pidofproc() +{ + local pidfile="" + local lpids="" + local pidlist="" + while true + do + case "${1}" in + -p) + pidfile="${2}" + shift 2 + ;; + -*) + log_failure_msg "Unknown Option: ${1}" + return 1 + ;; + *) + break + ;; + esac + done + + if [ "${#}" != "1" ]; then + shift 1 + log_failure_msg "Excess Arguments: $@" + return 1 + fi + + if [ -n "${pidfile}" ]; then + if [ ! -r "${pidfile}" ]; then + return 3 # Program is not running + fi + + lpids=`head -n 1 ${pidfile}` + for pid in ${lpids} + do + if [ "${pid}" -ne "$$" -a "${pid}" -ne "${PPID}" ]; then + kill -0 "${pid}" 2> /dev/null && + pidlist="${pidlist} ${pid}" + fi + echo ${pidlist} + test -z "${pidlist}" && return 1 # Program is dead, pidfile exists + return 0 + done + + else + pidof "${1}" + fi + + if [ "$?" != "0" ]; then + return 3 # Program is not running + fi +} + +# Screen Dimentions +if [ -z "${COLUMNS}" ]; then + COLUMNS=$(stty size) + COLUMNS=${COLUMNS##* } +fi + +# When using remote connections, such as a serial port, stty size returns 0 +if [ "${COLUMNS}" = "0" ]; then + COLUMNS=80 +fi + +# Measurements for positioning result messages +COL=$((${COLUMNS} - 8)) +WCOL=$((${COL} - 2)) + +# Set Cursur Position Commands, used via echo -e +SET_COL="\\033[${COL}G" # at the $COL char +SET_WCOL="\\033[${WCOL}G" # at the $WCOL char +CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char + +# Set color commands, used via echo -e +# Please consult `man console_codes` for more information +# under the "Set Graphics Resolution" section +# +# Warning, when switching from a 8bit to a 9bit font, +# the linux console will reinterpret the bold (1;) to +# the top 256 glyphs of the 9bit font. This does +# not affect framebuffer consoles +NORMAL="\\033[0;39m" # Standard console grey +SUCCESS="\\033[1;32m" # Success is green +WARNING="\\033[1;33m" # Warnings are yellow +FAILURE="\\033[1;31m" # Failures are red +INFO="\\033[1;36m" # Information is light cyan +BRACKET="\\033[1;34m" # Brackets are blue + +BOOTMESG_PREFIX=" * " # Text at the beginning of every line + + +#******************************************************************************* +# Function - log_success_msg "message" +# +# Purpose: Print a success message +# +# Inputs: +# +# Outputs: +# +# Dependencies: echo +# +# Todo: logging +# +#******************************************************************************* +log_success_msg() +{ + echo -n -e "${BOOTMESG_PREFIX}${@}" + echo -e "${SET_COL}""${BRACKET}""[""${SUCCESS}"" OK ""${BRACKET}""]""${NORMAL}" + return 0 +} + +#******************************************************************************* +# Function - log_failure_msg "message" +# +# Purpose: Print a failure message +# +# Inputs: $@ - Message +# +# Outputs: Text output to screen +# +# Dependencies: echo +# +# Todo: logging +# +#******************************************************************************* +log_failure_msg() { + echo -n -e "${BOOTMESG_PREFIX}${@}" + echo -e "${SET_COL}""${BRACKET}""[""${FAILURE}"" FAIL ""${BRACKET}""]""${NORMAL}" + return 0 +} + +#******************************************************************************* +# Function - log_warning_msg "message" +# +# Purpose: print a warning message +# +# Inputs: $@ - Message +# +# Outputs: Text output to screen +# +# Dependencies: echo +# +# Todo: logging +# +#******************************************************************************* +log_warning_msg() { + echo -n -e "${BOOTMESG_PREFIX}${@}" + echo -e "${SET_COL}""${BRACKET}""[""${WARNING}"" WARN ""${BRACKET}""]""${NORMAL}" + return 0 +} + diff --git a/bootscripts/contrib/sysconfig/network-devices/services/mtu b/bootscripts/contrib/sysconfig/network-devices/services/mtu new file mode 100644 index 000000000..5a7de080e --- /dev/null +++ b/bootscripts/contrib/sysconfig/network-devices/services/mtu @@ -0,0 +1,45 @@ +#!/bin/sh +######################################################################## +# Begin $network_devices/services/mtu +# +# Description : Sets MTU per interface +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Jim Gifford - jim@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : This sets the maximum amount of bytes that can be +# transmitted within a packet. By default, this +# value is set to 1500. +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} +. ${IFCONFIG} + +if [ -z "${MTU}" ] +then + boot_mesg "MTU variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 +fi + +case "${2}" in + up) + boot_mesg "Setting the MTU for ${1} to ${MTU}..." + echo "${MTU}" > "/sys/class/net/${1}/mtu" + evaluate_retval + ;; + + down) + ;; + + *) + echo "Usage: ${0} [interface] {up|down}" + exit 1 + ;; +esac + +# End $network_devices/services/mtu diff --git a/bootscripts/lfs/init.d/checkfs b/bootscripts/lfs/init.d/checkfs new file mode 100644 index 000000000..5a56c25e6 --- /dev/null +++ b/bootscripts/lfs/init.d/checkfs @@ -0,0 +1,131 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/checkfs +# +# Description : File System Check +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# A. Luebke - luebke@users.sourceforge.net +# +# Version : 00.00 +# +# Notes : +# +# Based on checkfs script from LFS-3.1 and earlier. +# +# From man fsck +# 0 - No errors +# 1 - File system errors corrected +# 2 - System should be rebooted +# 4 - File system errors left uncorrected +# 8 - Operational error +# 16 - Usage or syntax error +# 32 - Fsck canceled by user request +# 128 - Shared library error +# +######################################################################### + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + if [ -f /fastboot ]; then + boot_mesg -n "/fastboot found, will not perform" ${INFO} + boot_mesg " file system checks as requested." + echo_ok + exit 0 + fi + + boot_mesg "Mounting root file system in read-only mode..." + mount -n -o remount,ro / >/dev/null + evaluate_retval + + if [ ${?} != 0 ]; then + echo_failure + boot_mesg -n "FAILURE:\n\nCannot check root" ${FAILURE} + boot_mesg -n " filesystem because it could not be mounted" + boot_mesg -n " in read-only mode.\n\nAfter you" + boot_mesg -n " press Enter, this system will be" + boot_mesg -n " halted and powered off." + boot_mesg -n "\n\nPress enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + read ENTER + ${rc_base}/init.d/halt stop + fi + + if [ -f /forcefsck ]; then + boot_mesg -n "/forcefsck found, forcing file" ${INFO} + boot_mesg " system checks as requested." + echo_ok + options="-f" + else + options="" + fi + + boot_mesg "Checking file systems..." + # Note: -a option used to be -p; but this fails e.g. + # on fsck.minix + fsck ${options} -a -A -C -T + error_value=${?} + + if [ "${error_value}" = 0 ]; then + echo_ok + fi + + if [ "${error_value}" = 1 ]; then + echo_warning + boot_mesg -n "WARNING:\n\nFile system errors" ${WARNING} + boot_mesg -n " were found and have been corrected." + boot_mesg -n " You may want to double-check that" + boot_mesg -n " everything was fixed properly." + boot_mesg "" ${NORMAL} + fi + + if [ "${error_value}" = 2 -o "${error_value}" = 3 ]; then + echo_warning + boot_mesg -n "WARNING:\n\nFile system errors" ${WARNING} + boot_mesg -n " were found and have been been" + boot_mesg -n " corrected, but the nature of the" + boot_mesg -n " errors require this system to be" + boot_mesg -n " rebooted.\n\nAfter you press enter," + boot_mesg -n " this system will be rebooted" + boot_mesg -n "\n\nPress Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + read ENTER + reboot -f + fi + + if [ "${error_value}" -gt 3 -a "${error_value}" -lt 16 ]; then + echo_failure + boot_mesg -n "FAILURE:\n\nFile system errors" ${FAILURE} + boot_mesg -n " were encountered that could not be" + boot_mesg -n " fixed automatically. This system" + boot_mesg -n " cannot continue to boot and will" + boot_mesg -n " therefore be halted until those" + boot_mesg -n " errors are fixed manually by a" + boot_mesg -n " System Administrator.\n\nAfter you" + boot_mesg -n " press Enter, this system will be" + boot_mesg -n " halted and powered off." + boot_mesg -n "\n\nPress Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + read ENTER + ${rc_base}/init.d/halt stop + fi + + if [ "${error_value}" -ge 16 ]; then + echo_failure + boot_mesg -n "FAILURE:\n\nUnexpected Failure" ${FAILURE} + boot_mesg -n " running fsck. Exited with error" + boot_mesg -n " code: ${error_value}." + boot_mesg "" ${NORMAL} + exit ${error_value} + fi + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/checkfs diff --git a/bootscripts/lfs/init.d/cleanfs b/bootscripts/lfs/init.d/cleanfs new file mode 100644 index 000000000..9a4e18601 --- /dev/null +++ b/bootscripts/lfs/init.d/cleanfs @@ -0,0 +1,110 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/cleanfs +# +# Description : Clean file system +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +# Function to create files/directory on boot. +create_files() { + # Read in the configuration file. + exec 9>&0 < /etc/sysconfig/createfiles + while read name type perm usr grp dtype maj min junk + do + + # Ignore comments and blank lines. + case "${name}" in + ""|\#*) continue ;; + esac + + # Ignore existing files. + if [ ! -e "${name}" ]; then + # Create stuff based on its type. + case "${type}" in + dir) + mkdir "${name}" + ;; + file) + :> "${name}" + ;; + dev) + case "${dtype}" in + char) + mknod "${name}" c ${maj} ${min} + ;; + block) + mknod "${name}" b ${maj} ${min} + ;; + pipe) + mknod "${name}" p + ;; + *) + boot_mesg -n "\nUnknown device type: ${dtype}" ${WARNING} + boot_mesg "" ${NORMAL} + ;; + esac + ;; + *) + boot_mesg -n "\nUnknown type: ${type}" ${WARNING} + boot_mesg "" ${NORMAL} + continue + ;; + esac + + # Set up the permissions, too. + chown ${usr}:${grp} "${name}" + chmod ${perm} "${name}" + fi + done + exec 0>&9 9>&- +} + +case "${1}" in + start) + boot_mesg -n "Cleaning file systems:" ${INFO} + + boot_mesg -n " /tmp" ${NORMAL} + cd /tmp && + find . -xdev -mindepth 1 ! -name lost+found \ + -delete || failed=1 + + boot_mesg -n " /var/lock" ${NORMAL} + cd /var/lock && + find . -type f ! -newer /proc -exec rm -f {} \; || failed=1 + + boot_mesg " /var/run" ${NORMAL} + cd /var/run && + find . ! -type d ! -name utmp ! -newer /proc \ + -exec rm -f {} \; || failed=1 + > /var/run/utmp + if grep -q '^utmp:' /etc/group ; then + chmod 664 /var/run/utmp + chgrp utmp /var/run/utmp + fi + + (exit ${failed}) + evaluate_retval + + if egrep -qv '^(#|$)' /etc/sysconfig/createfiles 2>/dev/null; then + boot_mesg "Creating files and directories..." + create_files + evaluate_retval + fi + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/cleanfs diff --git a/bootscripts/lfs/init.d/console b/bootscripts/lfs/init.d/console new file mode 100644 index 000000000..e8b853591 --- /dev/null +++ b/bootscripts/lfs/init.d/console @@ -0,0 +1,109 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/console +# +# Description : Sets keymap and screen font +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# Alexander E. Patrakov +# +# Version : 00.03 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +# Native English speakers probably don't have /etc/sysconfig/console at all +if [ -f /etc/sysconfig/console ] +then + . /etc/sysconfig/console +else + exit 0 +fi + +is_true() { + [ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ] +} + +failed=0 + +case "${1}" in + start) + boot_mesg "Setting up Linux console..." + # There should be no bogus failures below this line! + + # Figure out if a framebuffer console is used + [ -d /sys/class/graphics/fb0 ] && USE_FB=1 || USE_FB=0 + + # Figure out the command to set the console into the + # desired mode + is_true "${UNICODE}" && + MODE_COMMAND="${ECHO} -en '\033%G' && kbd_mode -u" || + MODE_COMMAND="${ECHO} -en '\033%@\033(K' && kbd_mode -a" + + # On framebuffer consoles, font has to be set for each vt in + # UTF-8 mode. This doesn't hurt in non-UTF-8 mode also. + + ! is_true "${USE_FB}" || [ -z "${FONT}" ] || + MODE_COMMAND="${MODE_COMMAND} && setfont ${FONT}" + + # Apply that command to all consoles mentioned in + # /etc/inittab. Important: in the UTF-8 mode this should + # happen before setfont, otherwise a kernel bug will + # show up and the unicode map of the font will not be + # used. + # FIXME: Fedora Core also initializes two spare consoles + # - do we want that? + + for TTY in `grep '^[^#].*respawn:/sbin/agetty' /etc/inittab | + grep -o '\btty[[:digit:]]*\b'` + do + openvt -f -w -c ${TTY#tty} -- \ + /bin/sh -c "${MODE_COMMAND}" || failed=1 + done + + # Set the font (if not already set above) and the keymap + is_true "${USE_FB}" || [ -z "${FONT}" ] || + setfont $FONT || + failed=1 + [ -z "${KEYMAP}" ] || + loadkeys ${KEYMAP} >/dev/null 2>&1 || + failed=1 + [ -z "${KEYMAP_CORRECTIONS}" ] || + loadkeys ${KEYMAP_CORRECTIONS} >/dev/null 2>&1 || + failed=1 + + # Linux kernel generates wrong bytes when composing + # in Unicode mode. That's why we disable dead keys in Unicode + # mode by default. If you need them, download and apply + # http://www.linuxfromscratch.org/~alexander/patches/linux-2.6.12.5-utf8_input-2.patch + # After patching, add "-m charset_of_your_keymap" to the FONT + # variable and set BROKEN_COMPOSE=false + # in /etc/sysconfig/console + + [ -n "$BROKEN_COMPOSE" ] || BROKEN_COMPOSE="$UNICODE" + ! is_true "$BROKEN_COMPOSE" || + echo "" | loadkeys -c >/dev/null 2>&1 || + failed=1 + + # Convert the keymap from $LEGACY_CHARSET to UTF-8 + [ -z "$LEGACY_CHARSET" ] || + dumpkeys -c "$LEGACY_CHARSET" | + loadkeys -u >/dev/null 2>&1 || + failed=1 + + # If any of the commands above failed, the trap at the + # top would set $failed to 1 + ( exit $failed ) + evaluate_retval + ;; + *) + echo $"Usage:" "${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/console diff --git a/bootscripts/lfs/init.d/consolelog b/bootscripts/lfs/init.d/consolelog new file mode 100755 index 000000000..34b416195 --- /dev/null +++ b/bootscripts/lfs/init.d/consolelog @@ -0,0 +1,61 @@ +#!/bin/sh +# Begin $rc_base/init.d/consolelog + +######################################################################## +# +# Description : Set the kernel log level for the console +# +# Authors : Dan Nicholson - dnicholson@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : /proc must be mounted before this can run +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +# set the default loglevel +LOGLEVEL=7 +if [ -r /etc/sysconfig/console ]; then + . /etc/sysconfig/console +fi + +case "${1}" in + start) + case "$LOGLEVEL" in + [1-8]) + boot_mesg "Setting the console log level to ${LOGLEVEL}..." + dmesg -n $LOGLEVEL + evaluate_retval + ;; + *) + boot_mesg "Console log level '${LOGLEVEL}' is invalid" ${FAILURE} + echo_failure + ;; + esac + ;; + status) + # Read the current value if possible + if [ -r /proc/sys/kernel/printk ]; then + read level line < /proc/sys/kernel/printk + else + boot_mesg "Can't read the current console log level" ${FAILURE} + echo_failure + fi + + # Print the value + if [ -n "$level" ]; then + ${ECHO} -e "${INFO}The current console log level" \ + "is ${level}${NORMAL}" + fi + ;; + + *) + echo "Usage: ${0} {start|status}" + exit 1 + ;; +esac + +# End $rc_base/init.d/consolelog diff --git a/bootscripts/lfs/init.d/functions b/bootscripts/lfs/init.d/functions new file mode 100644 index 000000000..a9e13fd27 --- /dev/null +++ b/bootscripts/lfs/init.d/functions @@ -0,0 +1,769 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/functions +# +# Description : Run Level Control Functions +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : With code based on Matthias Benkmann's simpleinit-msb +# http://winterdrache.de/linux/newboot/index.html +# +######################################################################## + +## Environmental setup +# Setup default values for environment +umask 022 +export PATH="/bin:/usr/bin:/sbin:/usr/sbin" + +# Signal sent to running processes to refresh their configuration +RELOADSIG="HUP" + +# Number of seconds between STOPSIG and FALLBACK when stopping processes +KILLDELAY="3" + +## Screen Dimensions +# Find current screen size +if [ -z "${COLUMNS}" ]; then + COLUMNS=$(stty size) + COLUMNS=${COLUMNS##* } +fi + +# When using remote connections, such as a serial port, stty size returns 0 +if [ "${COLUMNS}" = "0" ]; then + COLUMNS=80 +fi + +## Measurements for positioning result messages +COL=$((${COLUMNS} - 8)) +WCOL=$((${COL} - 2)) + +## Provide an echo that supports -e and -n +# If formatting is needed, $ECHO should be used +case "`echo -e -n test`" in + -[en]*) + ECHO=/bin/echo + ;; + *) + ECHO=echo + ;; +esac + +## Set Cursor Position Commands, used via $ECHO +SET_COL="\\033[${COL}G" # at the $COL char +SET_WCOL="\\033[${WCOL}G" # at the $WCOL char +CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char + +## Set color commands, used via $ECHO +# Please consult `man console_codes for more information +# under the "ECMA-48 Set Graphics Rendition" section +# +# Warning: when switching from a 8bit to a 9bit font, +# the linux console will reinterpret the bold (1;) to +# the top 256 glyphs of the 9bit font. This does +# not affect framebuffer consoles +NORMAL="\\033[0;39m" # Standard console grey +SUCCESS="\\033[1;32m" # Success is green +WARNING="\\033[1;33m" # Warnings are yellow +FAILURE="\\033[1;31m" # Failures are red +INFO="\\033[1;36m" # Information is light cyan +BRACKET="\\033[1;34m" # Brackets are blue + +STRING_LENGTH="0" # the length of the current message + +#******************************************************************************* +# Function - boot_mesg() +# +# Purpose: Sending information from bootup scripts to the console +# +# Inputs: $1 is the message +# $2 is the colorcode for the console +# +# Outputs: Standard Output +# +# Dependencies: - sed for parsing strings. +# - grep for counting string length. +# +# Todo: +#******************************************************************************* +boot_mesg() +{ + local ECHOPARM="" + + while true + do + case "${1}" in + -n) + ECHOPARM=" -n " + shift 1 + ;; + -*) + echo "Unknown Option: ${1}" + return 1 + ;; + *) + break + ;; + esac + done + + ## Figure out the length of what is to be printed to be used + ## for warning messages. + STRING_LENGTH=$((${#1} + 1)) + + # Print the message to the screen + ${ECHO} ${ECHOPARM} -e "${2}${1}" + +} + +boot_mesg_flush() +{ + # Reset STRING_LENGTH for next message + STRING_LENGTH="0" +} + +boot_log() +{ + # Left in for backwards compatibility + : +} + +echo_ok() +{ + ${ECHO} -n -e "${CURS_UP}${SET_COL}${BRACKET}[${SUCCESS} OK ${BRACKET}]" + ${ECHO} -e "${NORMAL}" + boot_mesg_flush +} + +echo_failure() +{ + ${ECHO} -n -e "${CURS_UP}${SET_COL}${BRACKET}[${FAILURE} FAIL ${BRACKET}]" + ${ECHO} -e "${NORMAL}" + boot_mesg_flush +} + +echo_warning() +{ + ${ECHO} -n -e "${CURS_UP}${SET_COL}${BRACKET}[${WARNING} WARN ${BRACKET}]" + ${ECHO} -e "${NORMAL}" + boot_mesg_flush +} + +print_error_msg() +{ + echo_failure + # $i is inherited by the rc script + boot_mesg -n "FAILURE:\n\nYou should not be reading this error message.\n\n" ${FAILURE} + boot_mesg -n " It means that an unforeseen error took" + boot_mesg -n " place in ${i}, which exited with a return value of" + boot_mesg " ${error_value}.\n" + boot_mesg_flush + boot_mesg -n "If you're able to track this" + boot_mesg -n " error down to a bug in one of the files provided by" + boot_mesg -n " the LFS book, please be so kind to inform us at" + boot_mesg " lfs-dev@linuxfromscratch.org.\n" + boot_mesg_flush + boot_mesg -n "Press Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + read ENTER +} + +check_script_status() +{ + # $i is inherited by the rc script + if [ ! -f ${i} ]; then + boot_mesg "${i} is not a valid symlink." ${WARNING} + echo_warning + continue + fi + + if [ ! -x ${i} ]; then + boot_mesg "${i} is not executable, skipping." ${WARNING} + echo_warning + continue + fi +} + +evaluate_retval() +{ + error_value="${?}" + + if [ ${error_value} = 0 ]; then + echo_ok + else + echo_failure + fi + + # This prevents the 'An Unexpected Error Has Occurred' from trivial + # errors. + return 0 +} + +print_status() +{ + if [ "${#}" = "0" ]; then + echo "Usage: ${0} {success|warning|failure}" + return 1 + fi + + case "${1}" in + + success) + echo_ok + ;; + + warning) + # Leave this extra case in because old scripts + # may call it this way. + case "${2}" in + running) + ${ECHO} -e -n "${CURS_UP}" + ${ECHO} -e -n "\\033[${STRING_LENGTH}G " + boot_mesg "Already running." ${WARNING} + echo_warning + ;; + not_running) + ${ECHO} -e -n "${CURS_UP}" + ${ECHO} -e -n "\\033[${STRING_LENGTH}G " + boot_mesg "Not running." ${WARNING} + echo_warning + ;; + not_available) + ${ECHO} -e -n "${CURS_UP}" + ${ECHO} -e -n "\\033[${STRING_LENGTH}G " + boot_mesg "Not available." ${WARNING} + echo_warning + ;; + *) + # This is how it is supposed to + # be called + echo_warning + ;; + esac + ;; + + failure) + echo_failure + ;; + + esac + +} + +reloadproc() +{ + local pidfile="" + local failure=0 + + while true + do + case "${1}" in + -p) + pidfile="${2}" + shift 2 + ;; + -*) + log_failure_msg "Unknown Option: ${1}" + return 2 + ;; + *) + break + ;; + esac + done + + if [ "${#}" -lt "1" ]; then + log_failure_msg "Usage: reloadproc [-p pidfile] pathname" + return 2 + fi + + # This will ensure compatibility with previous LFS Bootscripts + if [ -n "${PIDFILE}" ]; then + pidfile="${PIDFILE}" + fi + + # Is the process running? + if [ -z "${pidfile}" ]; then + pidofproc -s "${1}" + else + pidofproc -s -p "${pidfile}" "${1}" + fi + + if [ -n "${pidlist}" ]; then + for pid in ${pidlist} + do + kill -"${RELOADSIG}" "${pid}" || failure="1" + done + + (exit ${failure}) + evaluate_retval + + else + boot_mesg "Process ${1} not running." ${WARNING} + echo_warning + fi +} + +statusproc() +{ + local pidfile="" + local base="" + local ret="" + + while true + do + case "${1}" in + -p) + pidfile="${2}" + shift 2 + ;; + -*) + log_failure_msg "Unknown Option: ${1}" + return 2 + ;; + *) + break + ;; + esac + done + + if [ "${#}" != "1" ]; then + shift 1 + log_failure_msg "Usage: statusproc [-p pidfile] pathname" + return 2 + fi + + # Get the process basename + base="${1##*/}" + + # This will ensure compatibility with previous LFS Bootscripts + if [ -n "${PIDFILE}" ]; then + pidfile="${PIDFILE}" + fi + + # Is the process running? + if [ -z "${pidfile}" ]; then + pidofproc -s "${1}" + else + pidofproc -s -p "${pidfile}" "${1}" + fi + + # Store the return status + ret=$? + + if [ -n "${pidlist}" ]; then + ${ECHO} -e "${INFO}${base} is running with Process"\ + "ID(s) ${pidlist}.${NORMAL}" + else + if [ -n "${base}" -a -e "/var/run/${base}.pid" ]; then + ${ECHO} -e "${WARNING}${1} is not running but"\ + "/var/run/${base}.pid exists.${NORMAL}" + else + if [ -n "${pidfile}" -a -e "${pidfile}" ]; then + ${ECHO} -e "${WARNING}${1} is not running"\ + "but ${pidfile} exists.${NORMAL}" + else + ${ECHO} -e "${INFO}${1} is not running.${NORMAL}" + fi + fi + fi + + # Return the status from pidofproc + return $ret +} + +# The below functions are documented in the LSB-generic 2.1.0 + +#******************************************************************************* +# Function - pidofproc [-s] [-p pidfile] pathname +# +# Purpose: This function returns one or more pid(s) for a particular daemon +# +# Inputs: -p pidfile, use the specified pidfile instead of pidof +# pathname, path to the specified program +# +# Outputs: return 0 - Success, pid's in stdout +# return 1 - Program is dead, pidfile exists +# return 2 - Invalid or excessive number of arguments, +# warning in stdout +# return 3 - Program is not running +# +# Dependencies: pidof, echo, head +# +# Todo: Remove dependency on head +# This depreciates getpids +# Test changes to pidof +# +#******************************************************************************* +pidofproc() +{ + local pidfile="" + local lpids="" + local silent="" + pidlist="" + while true + do + case "${1}" in + -p) + pidfile="${2}" + shift 2 + ;; + + -s) + # Added for legacy opperation of getpids + # eliminates several '> /dev/null' + silent="1" + shift 1 + ;; + -*) + log_failure_msg "Unknown Option: ${1}" + return 2 + ;; + *) + break + ;; + esac + done + + if [ "${#}" != "1" ]; then + shift 1 + log_failure_msg "Usage: pidofproc [-s] [-p pidfile] pathname" + return 2 + fi + + if [ -n "${pidfile}" ]; then + if [ ! -r "${pidfile}" ]; then + return 3 # Program is not running + fi + + lpids=`head -n 1 ${pidfile}` + for pid in ${lpids} + do + if [ "${pid}" -ne "$$" -a "${pid}" -ne "${PPID}" ]; then + kill -0 "${pid}" 2>/dev/null && + pidlist="${pidlist} ${pid}" + fi + + if [ "${silent}" != "1" ]; then + echo "${pidlist}" + fi + + test -z "${pidlist}" && + # Program is dead, pidfile exists + return 1 + # else + return 0 + done + + else + pidlist=`pidof -o $$ -o $PPID -x "$1"` + if [ "${silent}" != "1" ]; then + echo "${pidlist}" + fi + + # Get provide correct running status + if [ -n "${pidlist}" ]; then + return 0 + else + return 3 + fi + + fi + + if [ "$?" != "0" ]; then + return 3 # Program is not running + fi +} + +# This will ensure compatibility with previous LFS Bootscripts +getpids() +{ + if [ -z "${PIDFILE}" ]; then + pidofproc -s -p "${PIDFILE}" $@ + else + pidofproc -s $@ + fi + base="${1##*/}" +} + +#******************************************************************************* +# Function - loadproc [-f] [-n nicelevel] [-p pidfile] pathname [args] +# +# Purpose: This runs the specified program as a daemon +# +# Inputs: -f, run the program even if it is already running +# -n nicelevel, specifies a nice level. See nice(1). +# -p pidfile, uses the specified pidfile +# pathname, pathname to the specified program +# args, arguments to pass to specified program +# +# Outputs: return 0 - Success +# return 2 - Invalid of excessive number of arguments, +# warning in stdout +# return 4 - Program or service status is unknown +# +# Dependencies: nice +# +# Todo: LSB says this should be called start_daemon +# LSB does not say that it should call evaluate_retval +# It checks for PIDFILE, which is deprecated. +# Will be removed after BLFS 6.0 +# loadproc returns 0 if program is already running, not LSB compliant +# +#******************************************************************************* +loadproc() +{ + local pidfile="" + local forcestart="" + local nicelevel="10" + +# This will ensure compatibility with previous LFS Bootscripts + if [ -n "${PIDFILE}" ]; then + pidfile="${PIDFILE}" + fi + + while true + do + case "${1}" in + -f) + forcestart="1" + shift 1 + ;; + -n) + nicelevel="${2}" + shift 2 + ;; + -p) + pidfile="${2}" + shift 2 + ;; + -*) + log_failure_msg "Unknown Option: ${1}" + return 2 #invalid or excess argument(s) + ;; + *) + break + ;; + esac + done + + if [ "${#}" = "0" ]; then + log_failure_msg "Usage: loadproc [-f] [-n nicelevel] [-p pidfile] pathname [args]" + return 2 #invalid or excess argument(s) + fi + + if [ -z "${forcestart}" ]; then + if [ -z "${pidfile}" ]; then + pidofproc -s "${1}" + else + pidofproc -s -p "${pidfile}" "${1}" + fi + + case "${?}" in + 0) + log_warning_msg "Unable to continue: ${1} is running" + return 0 # 4 + ;; + 1) + log_warning_msg "Unable to continue: ${pidfile} exists" + return 0 # 4 + ;; + 3) + ;; + *) + log_failure_msg "Unknown error code from pidofproc: ${?}" + return 4 + ;; + esac + fi + + nice -n "${nicelevel}" "${@}" + evaluate_retval # This is "Probably" not LSB compliant, but required to be compatible with older bootscripts + return 0 +} + +#******************************************************************************* +# Function - killproc [-p pidfile] pathname [signal] +# +# Purpose: +# +# Inputs: -p pidfile, uses the specified pidfile +# pathname, pathname to the specified program +# signal, send this signal to pathname +# +# Outputs: return 0 - Success +# return 2 - Invalid of excessive number of arguments, +# warning in stdout +# return 4 - Unknown Status +# +# Dependencies: kill +# +# Todo: LSB does not say that it should call evaluate_retval +# It checks for PIDFILE, which is deprecated. +# Will be removed after BLFS 6.0 +# +#******************************************************************************* +killproc() +{ + local pidfile="" + local killsig=TERM # default signal is SIGTERM + pidlist="" + + # This will ensure compatibility with previous LFS Bootscripts + if [ -n "${PIDFILE}" ]; then + pidfile="${PIDFILE}" + fi + + while true + do + case "${1}" in + -p) + pidfile="${2}" + shift 2 + ;; + -*) + log_failure_msg "Unknown Option: ${1}" + return 2 + ;; + *) + break + ;; + esac + done + + if [ "${#}" = "2" ]; then + killsig="${2}" + elif [ "${#}" != "1" ]; then + shift 2 + log_failure_msg "Usage: killproc [-p pidfile] pathname [signal]" + return 2 + fi + + # Is the process running? + if [ -z "${pidfile}" ]; then + pidofproc -s "${1}" + else + pidofproc -s -p "${pidfile}" "${1}" + fi + + # If running, send the signal + if [ -n "${pidlist}" ]; then + for pid in ${pidlist} + do + kill -${killsig} ${pid} 2>/dev/null + + # Wait up to 3 seconds, for ${pid} to terminate + case "${killsig}" in + TERM|SIGTERM|KILL|SIGKILL) + # sleep in 1/10ths of seconds and + # multiply KILLDELAY by 10 + local dtime="${KILLDELAY}0" + while [ "${dtime}" != "0" ] + do + kill -0 ${pid} 2>/dev/null || break + sleep 0.1 + dtime=$(( ${dtime} - 1)) + done + # If ${pid} is still running, kill it + kill -0 ${pid} 2>/dev/null && kill -KILL ${pid} 2>/dev/null + ;; + esac + done + + # Check if the process is still running if we tried to stop it + case "${killsig}" in + TERM|SIGTERM|KILL|SIGKILL) + if [ -z "${pidfile}" ]; then + pidofproc -s "${1}" + else + pidofproc -s -p "${pidfile}" "${1}" + fi + + # Program was terminated + if [ "$?" != "0" ]; then + # Remove the pidfile if necessary + if [ -f "${pidfile}" ]; then + rm -f "${pidfile}" + fi + echo_ok + return 0 + else # Program is still running + echo_failure + return 4 # Unknown Status + fi + ;; + *) + # Just see if the kill returned successfully + evaluate_retval + ;; + esac + else # process not running + print_status warning not_running + fi +} + + +#******************************************************************************* +# Function - log_success_msg "message" +# +# Purpose: Print a success message +# +# Inputs: $@ - Message +# +# Outputs: Text output to screen +# +# Dependencies: echo +# +# Todo: logging +# +#******************************************************************************* +log_success_msg() +{ + ${ECHO} -n -e "${BOOTMESG_PREFIX}${@}" + ${ECHO} -e "${SET_COL}""${BRACKET}""[""${SUCCESS}"" OK ""${BRACKET}""]""${NORMAL}" + return 0 +} + +#******************************************************************************* +# Function - log_failure_msg "message" +# +# Purpose: Print a failure message +# +# Inputs: $@ - Message +# +# Outputs: Text output to screen +# +# Dependencies: echo +# +# Todo: logging +# +#******************************************************************************* +log_failure_msg() { + ${ECHO} -n -e "${BOOTMESG_PREFIX}${@}" + ${ECHO} -e "${SET_COL}""${BRACKET}""[""${FAILURE}"" FAIL ""${BRACKET}""]""${NORMAL}" + return 0 +} + +#******************************************************************************* +# Function - log_warning_msg "message" +# +# Purpose: print a warning message +# +# Inputs: $@ - Message +# +# Outputs: Text output to screen +# +# Dependencies: echo +# +# Todo: logging +# +#******************************************************************************* +log_warning_msg() { + ${ECHO} -n -e "${BOOTMESG_PREFIX}${@}" + ${ECHO} -e "${SET_COL}""${BRACKET}""[""${WARNING}"" WARN ""${BRACKET}""]""${NORMAL}" + return 0 +} + +# End $rc_base/init.d/functions diff --git a/bootscripts/lfs/init.d/halt b/bootscripts/lfs/init.d/halt new file mode 100644 index 000000000..f3b016c38 --- /dev/null +++ b/bootscripts/lfs/init.d/halt @@ -0,0 +1,28 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/halt +# +# Description : Halt Script +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + stop) + halt -d -f -i -p + ;; + *) + echo "Usage: {stop}" + exit 1 + ;; +esac + +# End $rc_base/init.d/halt diff --git a/bootscripts/lfs/init.d/localnet b/bootscripts/lfs/init.d/localnet new file mode 100644 index 000000000..4e5010229 --- /dev/null +++ b/bootscripts/lfs/init.d/localnet @@ -0,0 +1,54 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/localnet +# +# Description : Loopback device +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} +. /etc/sysconfig/network + +case "${1}" in + start) + boot_mesg "Bringing up the loopback interface..." + ip addr add 127.0.0.1/8 label lo dev lo + ip link set lo up + evaluate_retval + + boot_mesg "Setting hostname to ${HOSTNAME}..." + hostname ${HOSTNAME} + evaluate_retval + ;; + + stop) + boot_mesg "Bringing down the loopback interface..." + ip link set lo down + evaluate_retval + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + status) + echo "Hostname is: $(hostname)" + ip link show lo + ;; + + *) + echo "Usage: ${0} {start|stop|restart|status}" + exit 1 + ;; +esac + +# End $rc_base/init.d/localnet diff --git a/bootscripts/lfs/init.d/modules b/bootscripts/lfs/init.d/modules new file mode 100644 index 000000000..e8fbdfa9e --- /dev/null +++ b/bootscripts/lfs/init.d/modules @@ -0,0 +1,72 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/modules +# +# Description : Module auto-loading script +# +# Authors : Zack Winkles +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +# Assure that the kernel has module support. +[ -e /proc/ksyms -o -e /proc/modules ] || exit 0 + +case "${1}" in + start) + + # Exit if there's no modules file or there are no + # valid entries + [ -r /etc/sysconfig/modules ] && + egrep -qv '^($|#)' /etc/sysconfig/modules || + exit 0 + + boot_mesg -n "Loading modules:" ${INFO} + + # Only try to load modules if the user has actually given us + # some modules to load. + while read module args; do + + # Ignore comments and blank lines. + case "$module" in + ""|"#"*) continue ;; + esac + + # Attempt to load the module, making + # sure to pass any arguments provided. + modprobe ${module} ${args} >/dev/null + + # Print the module name if successful, + # otherwise take note. + if [ $? -eq 0 ]; then + boot_mesg -n " ${module}" ${NORMAL} + else + failedmod="${failedmod} ${module}" + fi + done < /etc/sysconfig/modules + + boot_mesg "" ${NORMAL} + # Print a message about successfully loaded + # modules on the correct line. + echo_ok + + # Print a failure message with a list of any + # modules that may have failed to load. + if [ -n "${failedmod}" ]; then + boot_mesg "Failed to load modules:${failedmod}" ${FAILURE} + echo_failure + fi + ;; + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/modules diff --git a/bootscripts/lfs/init.d/mountfs b/bootscripts/lfs/init.d/mountfs new file mode 100644 index 000000000..3d9262463 --- /dev/null +++ b/bootscripts/lfs/init.d/mountfs @@ -0,0 +1,54 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/mountfs +# +# Description : File System Mount Script +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + boot_mesg "Remounting root file system in read-write mode..." + mount -n -o remount,rw / >/dev/null + evaluate_retval + + # Remove fsck-related file system watermarks. + rm -f /fastboot /forcefsck + + boot_mesg "Recording existing mounts in /etc/mtab..." + > /etc/mtab + mount -f / || failed=1 + mount -f /proc || failed=1 + mount -f /sys || failed=1 + (exit ${failed}) + evaluate_retval + + # This will mount all filesystems that do not have _netdev in + # their option list. _netdev denotes a network filesystem. + boot_mesg "Mounting remaining file systems..." + mount -a -O no_netdev >/dev/null + evaluate_retval + ;; + + stop) + boot_mesg "Unmounting all other currently mounted file systems..." + umount -a -d -r >/dev/null + evaluate_retval + ;; + + *) + echo "Usage: ${0} {start|stop}" + exit 1 + ;; +esac + +# End $rc_base/init.d/mountfs diff --git a/bootscripts/lfs/init.d/mountkernfs b/bootscripts/lfs/init.d/mountkernfs new file mode 100644 index 000000000..10b165a5c --- /dev/null +++ b/bootscripts/lfs/init.d/mountkernfs @@ -0,0 +1,44 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/mountkernfs +# +# Description : Mount proc and sysfs +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + boot_mesg -n "Mounting kernel-based file systems:" ${INFO} + + if ! mountpoint /proc >/dev/null; then + boot_mesg -n " /proc" ${NORMAL} + mount -n /proc || failed=1 + fi + + if ! mountpoint /sys >/dev/null; then + boot_mesg -n " /sys" ${NORMAL} + mount -n /sys || failed=1 + fi + + boot_mesg "" ${NORMAL} + + (exit ${failed}) + evaluate_retval + ;; + + *) + echo "Usage: ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/mountkernfs diff --git a/bootscripts/lfs/init.d/network b/bootscripts/lfs/init.d/network new file mode 100644 index 000000000..b99ecfdb9 --- /dev/null +++ b/bootscripts/lfs/init.d/network @@ -0,0 +1,73 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/network +# +# Description : Network Control Script +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} +. /etc/sysconfig/network + +case "${1}" in + start) + # Start all network interfaces + for file in ${network_devices}/ifconfig.* + do + interface=${file##*/ifconfig.} + + # skip if $file is * (because nothing was found) + if [ "${interface}" = "*" ] + then + continue + fi + + IN_BOOT=1 ${network_devices}/ifup ${interface} + done + ;; + + stop) + # Reverse list + FILES="" + for file in ${network_devices}/ifconfig.* + do + FILES="${file} ${FILES}" + done + + # Stop all network interfaces + for file in ${FILES} + do + interface=${file##*/ifconfig.} + + # skip if $file is * (because nothing was found) + if [ "${interface}" = "*" ] + then + continue + fi + + IN_BOOT=1 ${network_devices}/ifdown ${interface} + done + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + *) + echo "Usage: ${0} {start|stop|restart}" + exit 1 + ;; +esac + +# End /etc/rc.d/init.d/network diff --git a/bootscripts/lfs/init.d/rc b/bootscripts/lfs/init.d/rc new file mode 100644 index 000000000..38d4ae2df --- /dev/null +++ b/bootscripts/lfs/init.d/rc @@ -0,0 +1,99 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/rc +# +# Description : Main Run Level Control Script +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +# This sets a few default terminal options. +stty sane + +# These 3 signals will not cause our script to exit +trap "" INT QUIT TSTP + +[ "${1}" != "" ] && runlevel=${1} + +if [ "${runlevel}" = "" ]; then + echo "Usage: ${0} <runlevel>" >&2 + exit 1 +fi + +previous=${PREVLEVEL} +[ "${previous}" = "" ] && previous=N + +if [ ! -d ${rc_base}/rc${runlevel}.d ]; then + boot_mesg "${rc_base}/rc${runlevel}.d does not exist." ${WARNING} + boot_mesg_flush + exit 1 +fi + +# Attempt to stop all service started by previous runlevel, +# and killed in this runlevel +if [ "${previous}" != "N" ]; then + for i in $(ls -v ${rc_base}/rc${runlevel}.d/K* 2> /dev/null) + do + check_script_status + + suffix=${i#$rc_base/rc$runlevel.d/K[0-9][0-9]} + prev_start=$rc_base/rc$previous.d/S[0-9][0-9]$suffix + sysinit_start=$rc_base/rcsysinit.d/S[0-9][0-9]$suffix + + if [ "${runlevel}" != "0" ] && [ "${runlevel}" != "6" ]; then + if [ ! -f ${prev_start} ] && [ ! -f ${sysinit_start} ]; then + boot_mesg -n "WARNING:\n\n${i} can't be" ${WARNING} + boot_mesg -n " executed because it was not" + boot_mesg -n " not started in the previous" + boot_mesg -n " runlevel (${previous})." + boot_mesg "" ${NORMAL} + boot_mesg_flush + continue + fi + fi + ${i} stop + error_value=${?} + + if [ "${error_value}" != "0" ]; then + print_error_msg + fi + done +fi + +#Start all functions in this runlevel +for i in $( ls -v ${rc_base}/rc${runlevel}.d/S* 2> /dev/null) +do + if [ "${previous}" != "N" ]; then + suffix=${i#$rc_base/rc$runlevel.d/S[0-9][0-9]} + stop=$rc_base/rc$runlevel.d/K[0-9][0-9]$suffix + prev_start=$rc_base/rc$previous.d/S[0-9][0-9]$suffix + + [ -f ${prev_start} ] && [ ! -f ${stop} ] && continue + fi + + check_script_status + + case ${runlevel} in + 0|6) + ${i} stop + ;; + *) + ${i} start + ;; + esac + error_value=${?} + + if [ "${error_value}" != "0" ]; then + print_error_msg + fi +done + +# End $rc_base/init.d/rc diff --git a/bootscripts/lfs/init.d/reboot b/bootscripts/lfs/init.d/reboot new file mode 100644 index 000000000..fec0c1f6f --- /dev/null +++ b/bootscripts/lfs/init.d/reboot @@ -0,0 +1,31 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/reboot +# +# Description : Reboot Scripts +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + stop) + boot_mesg "Restarting system..." + reboot -d -f -i + ;; + + *) + echo "Usage: ${0} {stop}" + exit 1 + ;; + +esac + +# End $rc_base/init.d/reboot diff --git a/bootscripts/lfs/init.d/sendsignals b/bootscripts/lfs/init.d/sendsignals new file mode 100644 index 000000000..4c3d05eda --- /dev/null +++ b/bootscripts/lfs/init.d/sendsignals @@ -0,0 +1,52 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/sendsignals +# +# Description : Sendsignals Script +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + stop) + boot_mesg "Sending all processes the TERM signal..." + killall5 -15 + error_value=${?} + + sleep ${KILLDELAY} + + if [ "${error_value}" = 0 ]; then + echo_ok + else + echo_failure + fi + + boot_mesg "Sending all processes the KILL signal..." + killall5 -9 + error_value=${?} + + sleep ${KILLDELAY} + + if [ "${error_value}" = 0 ]; then + echo_ok + else + echo_failure + fi + ;; + + *) + echo "Usage: ${0} {stop}" + exit 1 + ;; + +esac + +# End $rc_base/init.d/sendsignals diff --git a/bootscripts/lfs/init.d/setclock b/bootscripts/lfs/init.d/setclock new file mode 100644 index 000000000..a87fb2d23 --- /dev/null +++ b/bootscripts/lfs/init.d/setclock @@ -0,0 +1,49 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/setclock +# +# Description : Setting Linux Clock +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} +. /etc/sysconfig/clock + +CLOCKPARAMS= + +case "${UTC}" in + yes|true|1) + CLOCKPARAMS="${CLOCKPARAMS} --utc" + ;; + + no|false|0) + CLOCKPARAMS="${CLOCKPARAMS} --localtime" + ;; + +esac + +case ${1} in + start) + boot_mesg "Setting system clock..." + hwclock --hctosys ${CLOCKPARAMS} >/dev/null + evaluate_retval + ;; + + stop) + boot_mesg "Setting hardware clock..." + hwclock --systohc ${CLOCKPARAMS} >/dev/null + evaluate_retval + ;; + + *) + echo "Usage: ${0} {start|stop}" + ;; + +esac diff --git a/bootscripts/lfs/init.d/swap b/bootscripts/lfs/init.d/swap new file mode 100644 index 000000000..edc63f3b0 --- /dev/null +++ b/bootscripts/lfs/init.d/swap @@ -0,0 +1,50 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/swap +# +# Description : Swap Control Script +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + boot_mesg "Activating all swap files/partitions..." + swapon -a + evaluate_retval + ;; + + stop) + boot_mesg "Deactivating all swap files/partitions..." + swapoff -a + evaluate_retval + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + status) + boot_mesg "Retrieving swap status." ${INFO} + echo_ok + echo + swapon -s + ;; + + *) + echo "Usage: ${0} {start|stop|restart|status}" + exit 1 + ;; +esac + +# End $rc_base/init.d/swap diff --git a/bootscripts/lfs/init.d/sysctl b/bootscripts/lfs/init.d/sysctl new file mode 100644 index 000000000..0d0b5c1b3 --- /dev/null +++ b/bootscripts/lfs/init.d/sysctl @@ -0,0 +1,39 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/sysctl +# +# Description : File uses /etc/sysctl.conf to set kernel runtime +# parameters +# +# Authors : Nathan Coulson (nathan@linuxfromscratch.org) +# Matthew Burgress (matthew@linuxfromscratch.org) +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + if [ -f "/etc/sysctl.conf" ]; then + boot_mesg "Setting kernel runtime parameters..." + sysctl -q -p + evaluate_retval + fi + ;; + + status) + sysctl -a + ;; + + *) + echo "Usage: ${0} {start|status}" + exit 1 + ;; +esac + +# End $rc_base/init.d/sysctl diff --git a/bootscripts/lfs/init.d/sysklogd b/bootscripts/lfs/init.d/sysklogd new file mode 100644 index 000000000..e0a568ce6 --- /dev/null +++ b/bootscripts/lfs/init.d/sysklogd @@ -0,0 +1,57 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/sysklogd +# +# Description : Sysklogd loader +# +# Authors : Gerard Beekmans - gerard@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + boot_mesg "Starting system log daemon..." + loadproc syslogd -m 0 + + boot_mesg "Starting kernel log daemon..." + loadproc klogd + ;; + + stop) + boot_mesg "Stopping kernel log daemon..." + killproc klogd + + boot_mesg "Stopping system log daemon..." + killproc syslogd + ;; + + reload) + boot_mesg "Reloading system log daemon config file..." + reloadproc syslogd + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + status) + statusproc syslogd + statusproc klogd + ;; + + *) + echo "Usage: ${0} {start|stop|reload|restart|status}" + exit 1 + ;; +esac + +# End $rc_base/init.d/sysklogd diff --git a/bootscripts/lfs/init.d/template b/bootscripts/lfs/init.d/template new file mode 100644 index 000000000..69dc2a6a2 --- /dev/null +++ b/bootscripts/lfs/init.d/template @@ -0,0 +1,50 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/ +# +# Description : +# +# Authors : +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + boot_mesg "Starting..." + loadproc + ;; + + stop) + boot_mesg "Stopping..." + killproc + ;; + + reload) + boot_mesg "Reloading..." + reloadproc + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + status) + statusproc + ;; + + *) + echo "Usage: ${0} {start|stop|reload|restart|status}" + exit 1 + ;; +esac + +# End $rc_base/init.d/ diff --git a/bootscripts/lfs/init.d/udev b/bootscripts/lfs/init.d/udev new file mode 100644 index 000000000..03846e6f3 --- /dev/null +++ b/bootscripts/lfs/init.d/udev @@ -0,0 +1,77 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/udev +# +# Description : Udev cold-plugging script +# +# Authors : Zack Winkles, Alexander E. Patrakov +# +# Version : 00.02 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + boot_mesg "Populating /dev with device nodes..." + if ! grep -q '[[:space:]]sysfs' /proc/mounts; then + echo_failure + boot_mesg -n "FAILURE:\n\nUnable to create" ${FAILURE} + boot_mesg -n " devices without a SysFS filesystem" + boot_mesg -n "\n\nAfter you press Enter, this system" + boot_mesg -n " will be halted and powered off." + boot_mesg -n "\n\nPress Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + read ENTER + /etc/rc.d/init.d/halt stop + fi + + # Mount a temporary file system over /dev, so that any devices + # made or removed during this boot don't affect the next one. + # The reason we don't write to mtab is because we don't ever + # want /dev to be unavailable (such as by `umount -a'). + mount -n -t tmpfs tmpfs /dev -o mode=755 + if [ ${?} != 0 ]; then + echo_failure + boot_mesg -n "FAILURE:\n\nCannot mount a tmpfs" ${FAILURE} + boot_mesg -n " onto /dev, this system will be halted." + boot_mesg -n "\n\nAfter you press Enter, this system" + boot_mesg -n " will be halted and powered off." + boot_mesg -n "\n\nPress Enter to continue..." ${INFO} + boot_mesg "" ${NORMAL} + read ENTER + /etc/rc.d/init.d/halt stop + fi + + # Udev handles uevents itself, so we don't need to have + # the kernel call out to any binary in response to them + echo > /proc/sys/kernel/hotplug + + # Copy static device nodes to /dev + cp -a /lib/udev/devices/* /dev + + # Start the udev daemon to continually watch for, and act on, + # uevents + /sbin/udevd --daemon + + # Now traverse /sys in order to "coldplug" devices that have + # already been discovered + /sbin/udevadm trigger + + # Now wait for udevd to process the uevents we triggered + /sbin/udevadm settle + evaluate_retval + + ;; + + *) + echo "Usage ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/udev diff --git a/bootscripts/lfs/init.d/udev_retry b/bootscripts/lfs/init.d/udev_retry new file mode 100644 index 000000000..8ce819e9e --- /dev/null +++ b/bootscripts/lfs/init.d/udev_retry @@ -0,0 +1,45 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/udev_retry +# +# Description : Udev cold-plugging script (retry) +# +# Authors : Alexander E. Patrakov +# +# Version : 00.02 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +case "${1}" in + start) + boot_mesg "Retrying failed uevents, if any..." + + # From Debian: "copy the rules generated before / was mounted + # read-write": + for file in /dev/.udev/tmp-rules--*; do + dest=${file##*tmp-rules--} + [ "$dest" = '*' ] && break + cat $file >> /etc/udev/rules.d/$dest + rm -f $file + done + + # Re-trigger the failed uevents in hope they will succeed now + /sbin/udevadm trigger --retry-failed + + # Now wait for udevd to process the uevents we triggered + /sbin/udevadm settle + evaluate_retval + ;; + + *) + echo "Usage ${0} {start}" + exit 1 + ;; +esac + +# End $rc_base/init.d/udev_retry diff --git a/bootscripts/lfs/sysconfig/createfiles b/bootscripts/lfs/sysconfig/createfiles new file mode 100644 index 000000000..8d1f89dc6 --- /dev/null +++ b/bootscripts/lfs/sysconfig/createfiles @@ -0,0 +1,28 @@ +######################################################################## +# Begin /etc/sysconfig/createfiles +# +# Description : Createfiles script config file +# +# Authors : +# +# Version : 00.00 +# +# Notes : The syntax of this file is as follows: +# if type is equal to "file" or "dir" +# <filename> <type> <permissions> <user> <group> +# if type is equal to "dev" +# <filename> <type> <permissions> <user> <group> <devtype> <major> <minor> +# +# <filename> is the name of the file which is to be created +# <type> is either file, dir, or dev. +# file creates a new file +# dir creates a new directory +# dev creates a new device +# <devtype> is either block, char or pipe +# block creates a block device +# char creates a character deivce +# pipe creates a pipe, this will ignore the <major> and <minor> fields +# <major> and <minor> are the major and minor numbers used for the device. +######################################################################## + +# End /etc/sysconfig/createfiles diff --git a/bootscripts/lfs/sysconfig/modules b/bootscripts/lfs/sysconfig/modules new file mode 100644 index 000000000..1c8493d45 --- /dev/null +++ b/bootscripts/lfs/sysconfig/modules @@ -0,0 +1,18 @@ +######################################################################## +# Begin /etc/sysconfig/modules +# +# Description : Module auto-loading configuration +# +# Authors : +# +# Version : 00.00 +# +# Notes : The syntax of this file is as follows: +# <module> [<arg1> <arg2> ...] +# +# Each module should be on it's own line, and any options that you want +# passed to the module should follow it. The line deliminator is either +# a space or a tab. +######################################################################## + +# End /etc/sysconfig/modules diff --git a/bootscripts/lfs/sysconfig/network-devices/ifdown b/bootscripts/lfs/sysconfig/network-devices/ifdown new file mode 100644 index 000000000..b836cb8ef --- /dev/null +++ b/bootscripts/lfs/sysconfig/network-devices/ifdown @@ -0,0 +1,95 @@ +#!/bin/sh +######################################################################## +# Begin $network_devices/ifdown +# +# Description : Interface Down +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.01 +# +# Notes : the IFCONFIG variable is passed to the scripts found +# in the services directory, to indicate what file the +# service should source to get environmental variables. +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +# Collect a list of configuration files for our interface +if [ -n "${2}" ]; then + for file in ${@#$1}; do # All parameters except $1 + FILES="${FILES} ${network_devices}/ifconfig.${1}/${file}" + done +elif [ -d "${network_devices}/ifconfig.${1}" ]; then + FILES=`echo ${network_devices}/ifconfig.${1}/*` +else + FILES="${network_devices}/ifconfig.${1}" +fi + +# Reverse the order configuration files are processed in +for file in ${FILES}; do + FILES2="${file} ${FILES2}" +done +FILES=${FILES2} + +# Process each configuration file +for file in ${FILES}; do + # skip backup files + if [ "${file}" != "${file%""~""}" ]; then + continue + fi + + if [ ! -f "${file}" ]; then + boot_mesg "${file} is not a network configuration file or directory." ${WARNING} + echo_warning + continue + fi + ( + . ${file} + + # Will not process this service if started by boot, and ONBOOT + # is not set to yes + if [ "${IN_BOOT}" = "1" -a "${ONBOOT}" != "yes" ]; then + continue + fi + + # Will not process this service if started by hotplug, and + # ONHOTPLUG is not set to yes + if [ "${IN_HOTPLUG}" = "1" -a "${ONHOTPLUG}" != "yes" ]; then + continue + fi + + # This will run the service script, if SERVICE is set + if [ -n "${SERVICE}" -a -x "${network_devices}/services/${SERVICE}" ]; then + if ip link show ${1} > /dev/null 2>&1 + then + IFCONFIG=${file} ${network_devices}/services/${SERVICE} ${1} down + else + boot_mesg "Interface ${1} doesn't exist." ${WARNING} + echo_warning + fi + else + boot_mesg -n "Unable to process ${file}. Either" ${FAILURE} + boot_mesg -n " the SERVICE variable was not set," + boot_mesg " or the specified service cannot be executed." + echo_failure + continue + fi + ) +done + +if [ -z "${2}" ]; then + link_status=`ip link show $1` + if [ -n "${link_status}" ]; then + if echo "${link_status}" | grep -q UP; then + boot_mesg "Bringing down the ${1} interface..." + ip link set ${1} down + evaluate_retval + fi + fi +fi + +# End $network_devices/ifdown diff --git a/bootscripts/lfs/sysconfig/network-devices/ifup b/bootscripts/lfs/sysconfig/network-devices/ifup new file mode 100644 index 000000000..c9dfe2fb9 --- /dev/null +++ b/bootscripts/lfs/sysconfig/network-devices/ifup @@ -0,0 +1,89 @@ +#!/bin/sh +######################################################################## +# Begin $network_devices/ifup +# +# Description : Interface Up +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : the IFCONFIG variable is passed to the scripts found +# in the services directory, to indicate what file the +# service should source to get environmental variables. +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +# Collect a list of configuration files for our interface +if [ -n "${2}" ]; then + for file in ${@#$1} # All parameters except $1 + do + FILES="${FILES} ${network_devices}/ifconfig.${1}/${file}" + done +elif [ -d "${network_devices}/ifconfig.${1}" ]; then + FILES=`echo ${network_devices}/ifconfig.${1}/*` +else + FILES="${network_devices}/ifconfig.${1}" +fi + +boot_mesg "Bringing up the ${1} interface..." +boot_mesg_flush + +# Process each configruation file +for file in ${FILES}; do + # skip backup files + if [ "${file}" != "${file%""~""}" ]; then + continue + fi + + if [ ! -f "${file}" ]; then + boot_mesg "${file} is not a network configuration file or directory." ${WARNING} + echo_warning + continue + fi + + ( + . ${file} + + # Will not process this service if started by boot, and ONBOOT + # is not set to yes + if [ "${IN_BOOT}" = "1" -a "${ONBOOT}" != "yes" ]; then + continue + fi + # Will not process this service if started by hotplug, and + # ONHOTPLUG is not set to yes + if [ "${IN_HOTPLUG}" = "1" -a "${ONHOTPLUG}" != "yes" -a "${HOSTNAME}" != "(none)" ]; then + continue + fi + + if [ -n "${SERVICE}" -a -x "${network_devices}/services/${SERVICE}" ]; then + if [ -z "${CHECK_LINK}" -o "${CHECK_LINK}" = "y" -o "${CHECK_LINK}" = "yes" -o "${CHECK_LINK}" = "1" ]; then + if ip link show ${1} > /dev/null 2>&1; then + link_status=`ip link show ${1}` + if [ -n "${link_status}" ]; then + if ! echo "${link_status}" | grep -q UP; then + ip link set ${1} up + fi + fi + else + boot_mesg "Interface ${1} doesn't exist." ${WARNING} + echo_warning + continue + fi + fi + IFCONFIG=${file} ${network_devices}/services/${SERVICE} ${1} up + else + boot_mesg "Unable to process ${file}. Either" ${FAILURE} + boot_mesg " the SERVICE variable was not set," + boot_mesg " or the specified service cannot be executed." + echo_failure + continue + fi + ) +done + +# End $network_devices/ifup diff --git a/bootscripts/lfs/sysconfig/network-devices/services/ipv4-static b/bootscripts/lfs/sysconfig/network-devices/services/ipv4-static new file mode 100644 index 000000000..a550d3d2a --- /dev/null +++ b/bootscripts/lfs/sysconfig/network-devices/services/ipv4-static @@ -0,0 +1,82 @@ +#!/bin/sh +######################################################################## +# Begin $network_devices/services/ipv4-static +# +# Description : IPV4 Static Boot Script +# +# Authors : Nathan Coulson - nathan@linuxfromscratch.org +# Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} +. ${IFCONFIG} + +if [ -z "${IP}" ]; then + boot_mesg "IP variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 +fi + +if [ -z "${PREFIX}" -a -z "${PEER}" ]; then + boot_mesg -n "PREFIX variable missing from ${IFCONFIG}," ${WARNING} + boot_mesg " assuming 24." + echo_warning + PREFIX=24 + args="${args} ${IP}/${PREFIX}" +elif [ -n "${PREFIX}" -a -n "${PEER}" ]; then + boot_mesg "PREFIX and PEER both specified in ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 +elif [ -n "${PREFIX}" ]; then + args="${args} ${IP}/${PREFIX}" +elif [ -n "${PEER}" ]; then + args="${args} ${IP} peer ${PEER}" +fi + +if [ -n "${BROADCAST}" ]; then + args="${args} broadcast ${BROADCAST}" +fi + +case "${2}" in + up) + boot_mesg "Adding IPv4 address ${IP} to the ${1} interface..." + ip addr add ${args} dev ${1} + evaluate_retval + + if [ -n "${GATEWAY}" ]; then + if ip route | grep -q default; then + boot_mesg "Gateway already setup; skipping." ${WARNING} + echo_warning + else + boot_mesg "Setting up default gateway..." + ip route add default via ${GATEWAY} dev ${1} + evaluate_retval + fi + fi + ;; + + down) + if [ -n "${GATEWAY}" ]; then + boot_mesg "Removing default gateway..." + ip route del default + evaluate_retval + fi + + boot_mesg "Removing IPv4 address ${IP} from the ${1} interface..." + ip addr del ${args} dev ${1} + evaluate_retval + ;; + + *) + echo "Usage: ${0} [interface] {up|down}" + exit 1 + ;; +esac + +# End $network_devices/services/ipv4-static diff --git a/bootscripts/lfs/sysconfig/network-devices/services/ipv4-static-route b/bootscripts/lfs/sysconfig/network-devices/services/ipv4-static-route new file mode 100644 index 000000000..378b1deff --- /dev/null +++ b/bootscripts/lfs/sysconfig/network-devices/services/ipv4-static-route @@ -0,0 +1,97 @@ +#!/bin/sh +######################################################################## +# Begin $network_devices/services/ipv4-static-route +# +# Description : IPV4 Static Route Script +# +# Authors : Kevin P. Fleming - kpfleming@linuxfromscratch.org +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} +. ${IFCONFIG} + +case "${TYPE}" in + ("" | "network") + need_ip=1 + need_gateway=1 + ;; + + ("default") + need_gateway=1 + args="${args} default" + desc="default" + ;; + + ("host") + need_ip=1 + ;; + + ("unreachable") + need_ip=1 + args="${args} unreachable" + desc="unreachable " + ;; + + (*) + boot_mesg "Unknown route type (${TYPE}) in ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + ;; +esac + +if [ -n "${need_ip}" ]; then + if [ -z "${IP}" ]; then + boot_mesg "IP variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + + if [ -z "${PREFIX}" ]; then + boot_mesg "PREFIX variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + + args="${args} ${IP}/${PREFIX}" + desc="${desc}${IP}/${PREFIX}" +fi + +if [ -n "${need_gateway}" ]; then + if [ -z "${GATEWAY}" ]; then + boot_mesg "GATEWAY variable missing from ${IFCONFIG}, cannot continue." ${FAILURE} + echo_failure + exit 1 + fi + args="${args} via ${GATEWAY}" +fi + +if [ -n "${SOURCE}" ]; then + args="${args} src ${SOURCE}" +fi + +case "${2}" in + up) + boot_mesg "Adding '${desc}' route to the ${1} interface..." + ip route add ${args} dev ${1} + evaluate_retval + ;; + + down) + boot_mesg "Removing '${desc}' route from the ${1} interface..." + ip route del ${args} dev ${1} + evaluate_retval + ;; + + *) + echo "Usage: ${0} [interface] {up|down}" + exit 1 + ;; +esac + +# End $network_devices/services/ipv4-static-route diff --git a/bootscripts/lfs/sysconfig/rc b/bootscripts/lfs/sysconfig/rc new file mode 100644 index 000000000..2333ff488 --- /dev/null +++ b/bootscripts/lfs/sysconfig/rc @@ -0,0 +1,18 @@ +######################################################################## +# Begin /etc/sysconfig/rc +# +# Description : rc script configuration +# +# Authors : +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +rc_base=/etc/rc.d +rc_functions=${rc_base}/init.d/functions +network_devices=/etc/sysconfig/network-devices + +# End /etc/sysconfig/rc |