removed fileutils, sh-utils and textutils

git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@2493 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

6 files changed, 0 insertions, 145 deletions

diff --git a/chapter05/fileutils-inst.xml b/chapter05/fileutils-inst.xml
deleted file mode 100644
index 6103a1e62..000000000
--- a/chapter05/fileutils-inst.xml
+++ /dev/null
@@ -1,47 +0,0 @@
-<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
-
-<sect2>
-<title>Installation of Fileutils</title>
-
-<para>There is a documented bug with the atexit() function in glibc-2.2.3
-when it is compiled with gcc-2.95.3. This bug only occurs on some systems
-(primarily AMD, but not exclusively). This bug causes segmentation faults
-in fileutils-4.1 when it is compiled statically. This patch causes
-on_exit() to be called instead of atexit().</para>
-
-<para>Note that in some cases using this patch will result in not being
-able to compile this package at all, even when your system has an AMD CPU
-and has Glibc-2.2.3 (or higher) installed. If that's the case, you'll need
-to remove the fileutils-&fileutils-version; directory and unpack it again
-from the tarball before continuing. We believe this may be the case when
-your distribution has altered Glibc-2.2.3 somehow, but the exact details
-are unknown.</para>
-
-<para>To fix this package to compile properly on AMD/Glibc-2.2.3
-machines, run the following command. Do <emphasis>NOT</emphasis>
-attempt this fix if you don't have Glibc-2.2.3 installed. It will more 
-than likely result in all kinds of compilation problems.</para>
-
-<para><screen><userinput>patch -Np1 -i ../fileutils-&fileutils-patch-version;.patch</userinput></screen></para>
-
-<para>Prepare the package to be compiled:</para>
-
-<para><screen><userinput>LDFLAGS="-static" \
-&nbsp;&nbsp;&nbsp;&nbsp;./configure --disable-nls --prefix=$LFS/static</userinput></screen></para>
-
-<para>Continue with compiling the package:</para>
-
-<para><screen><userinput>make</userinput></screen></para>
-
-<para>And finish off installing the package:</para>
-
-<para><screen><userinput>make install</userinput></screen></para>
-
-<para>Once you have installed Fileutils, you can test whether the
-segmentation fault problem has been avoided by running
-<userinput>$LFS/static/bin/ls</userinput>. If this works, then you are OK. If
-not, then you need to re-do the installation with the patch if you didn't
-use it, or without the patch if you did use it.</para>
-
-</sect2>
-
diff --git a/chapter05/fileutils.xml b/chapter05/fileutils.xml
deleted file mode 100644
index 19cbd8cd7..000000000
--- a/chapter05/fileutils.xml
+++ /dev/null
@@ -1,13 +0,0 @@
-<sect1 id="ch05-fileutils">
-<title>Installing Fileutils-&fileutils-version;</title>
-<?dbhtml filename="fileutils.html" dir="chapter05"?>
-
-<screen>Estimated build time:           &fileutils-time-static;
-Estimated required disk space:  &fileutils-compsize-static;</screen>
-
-&aa-fileutils-shortdesc;
-&aa-fileutils-dep;
-&c5-fileutils-inst;
-
-</sect1>
-
diff --git a/chapter05/shellutils-inst.xml b/chapter05/shellutils-inst.xml
deleted file mode 100644
index f760f8c6e..000000000
--- a/chapter05/shellutils-inst.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<sect2>
-<title>Installation of Sh-utils</title>
-
-<para>Before Sh-utils is installed, the sh-utils patch file may need to be
-applied. This patch is needed to avoid a conflict of variable names with
-certain Glibc versions (usually glibc-2.1.x) when compiling sh-utils
-statically. It is however safe to apply the patch even if you are running
-a different glibc version. So, if you aren't sure, it's best to apply
-it.</para>
-
-<para><screen><userinput>patch -Np1 -i ../sh-utils-&sh-utils-version;.patch</userinput></screen></para>
-
-<para>Prepare Sh-utils to be compiled:</para>
-
-<para><screen><userinput>LDFLAGS="-static" ./configure --prefix=$LFS/static \
-&nbsp;&nbsp;&nbsp;&nbsp;--disable-nls</userinput></screen></para>
-
-<para>Continue with compiling the package:</para>
-
-<para><screen><userinput>make</userinput></screen></para>
-
-<para>And finish off installing the package:</para>
-
-<para><screen><userinput>make install</userinput></screen></para>
-
-<para>During the make install stage you will see the following warning:</para>
-
-<blockquote><screen>WARNING: insufficient access; not installing su
-NOTE: to install su, run 'make install-root' as root</screen></blockquote>
-
-<para>You can safely ignore that warning. You need to be logged in as root
-in order to install <filename>su</filename> the way Sh-utils wants to install
-it, which is suid root. Because we don't need <filename>su</filename> during
-Chapter 6, and <filename>su</filename> will be properly installed when we
-re-install Sh-utils in Chapter 6.</para>
-
-</sect2>
-
diff --git a/chapter05/shellutils.xml b/chapter05/shellutils.xml
deleted file mode 100644
index cd11c4ebf..000000000
--- a/chapter05/shellutils.xml
+++ /dev/null
@@ -1,13 +0,0 @@
-<sect1 id="ch05-shutils">
-<title>Installing Sh-utils-&sh-utils-version;</title>
-<?dbhtml filename="sh-utils.html" dir="chapter05"?>
-
-<screen>Estimated build time:           &sh-utils-time-static;
-Estimated required disk space:  &sh-utils-compsize-static;</screen>
-
-&aa-shellutils-shortdesc;
-&aa-shellutils-dep;
-&c5-shellutils-inst;
-
-</sect1>
-
diff --git a/chapter05/textutils-inst.xml b/chapter05/textutils-inst.xml
deleted file mode 100644
index 61ce1c300..000000000
--- a/chapter05/textutils-inst.xml
+++ /dev/null
@@ -1,21 +0,0 @@
-<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
-
-<sect2>
-<title>Installation of Textutils</title>
-
-<para>Prepare Textutils to be compiled:</para>
-
-<para><screen><userinput>CPPFLAGS=-Dre_max_failures=re_max_failures2 \
-&nbsp;&nbsp;&nbsp;&nbsp;LDFLAGS="-static" ./configure --prefix=$LFS/static \
-&nbsp;&nbsp;&nbsp;&nbsp;--disable-nls</userinput></screen></para>
-
-<para>Continue with compiling the package:</para>
-
-<para><screen><userinput>make</userinput></screen></para>
-
-<para>Finish installing the package:</para>
-
-<para><screen><userinput>make install</userinput></screen></para>
-
-</sect2>
-
diff --git a/chapter05/textutils.xml b/chapter05/textutils.xml
deleted file mode 100644
index af453cbc8..000000000
--- a/chapter05/textutils.xml
+++ /dev/null
@@ -1,13 +0,0 @@
-<sect1 id="ch05-textutils">
-<title>Installing Textutils-&textutils-version;</title>
-<?dbhtml filename="textutils.html" dir="chapter05"?>
-
-<screen>Estimated build time:           &textutils-time-static;
-Estimated required disk space:  &textutils-compsize-static;</screen>
-
-&aa-textutils-shortdesc;
-&aa-textutils-dep;
-&c5-textutils-inst;
-
-</sect1>
-