Merging configaration subsections into their corresponding sections.

git-svn-id: http://svn.linuxfromscratch.org/LFS/trunk/BOOK@3245 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

12 files changed, 275 insertions, 285 deletions

diff --git a/chapter06/chapter06.xml b/chapter06/chapter06.xml
index e008d7cd5..070284803 100644
--- a/chapter06/chapter06.xml
+++ b/chapter06/chapter06.xml
@@ -60,7 +60,62 @@ with a series of short descriptions of these.</para>
 
 </sect1>
 
-&c6-mountproc;
+
+<sect1 id="ch-system-proc">
+<title>Mounting the proc and devpts file systems</title>
+<?dbhtml filename="proc.html" dir="chapter06"?>
+
+<para>In order for certain programs to function properly, the
+<emphasis>proc</emphasis> and <emphasis>devpts</emphasis> file systems must be
+available within the chroot environment. The proc file system is the process
+information pseudo file system through which the kernel provides information
+about the status of the system. And the devpts file system is nowadays the most
+common way pseudo terminals (PTYs) are implemented. Since kernel version 2.4, a
+file system can be mounted as many times and in as many places as you like,
+thus it's not a problem that these file systems are already mounted on your
+host system, especially so because they are virtual file systems.</para>
+
+<para>First become <emphasis>root</emphasis>, as only <emphasis>root</emphasis>
+can mount file systems in unusual places. Then check again that the LFS
+environment variable is set correctly by running <userinput>echo
+$LFS</userinput> and making sure it shows the path to your LFS partition's
+mount point, which is <filename class="directory">/mnt/lfs</filename> if you
+followed our example.</para>
+
+<para>Now make the mount points for these filesystems:</para>
+
+<screen><userinput>mkdir -p $LFS/{proc,dev/pts}</userinput></screen>
+
+<para>Mount the <emphasis>proc</emphasis> file system with:</para>
+
+<screen><userinput>mount proc $LFS/proc -t proc</userinput></screen>
+
+<para>And mount the <emphasis>devpts</emphasis> file system with:</para>
+
+<screen><userinput>mount devpts $LFS/dev/pts -t devpts</userinput></screen>
+
+<para>This last command might fail with an error like:</para>
+
+<blockquote><screen>filesystem devpts not supported by kernel</screen></blockquote>
+
+<para>The most likely cause for this is that your host system's kernel was
+compiled without support for the devpts file system. You can check which file
+systems your kernel supports by peeking into its internals with
+<command>cat /proc/filesystems</command>. If a file system type named
+<emphasis>devfs</emphasis> is listed there, then we'll be able to work around
+the problem by mounting the host's devfs file system on top of the new
+<filename>/dev</filename> structure which we'll create later on in the section
+on <xref linkend="ch-system-MAKEDEV"/>. If devfs was not listed, do not worry
+because there is yet a third way to get PTYs working inside the chroot
+environment. We'll cover this shortly in the aforementioned
+<xref linkend="ch-system-MAKEDEV"/> section.</para>
+
+<para>Remember that if for any reason you stop working on your LFS, and start
+again later, it's important to check that these file systems are mounted again
+before entering the chroot environment, otherwise problems could occur.</para>
+
+</sect1>
+
 
 <sect1 id="ch-system-chroot">
 <title>Entering the chroot environment</title>
diff --git a/chapter06/config-glibc.xml b/chapter06/config-glibc.xml
deleted file mode 100644
index 6d74eed27..000000000
--- a/chapter06/config-glibc.xml
+++ /dev/null
@@ -1,94 +0,0 @@
-<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
-
-<sect2><title>Configuring Glibc</title>
-
-<para>We need to create the <filename>/etc/nsswitch.conf</filename> file,
-because, although Glibc provides defaults when this file is missing or corrupt,
-the Glibc defaults don't work well with networking. Also, our time zone needs
-to be set up.</para>
-
-<para>Create a new file <filename>/etc/nsswitch.conf</filename> by running the
-following:</para>
-
-<screen><userinput>cat &gt; /etc/nsswitch.conf &lt;&lt; "EOF"</userinput>
-# Begin /etc/nsswitch.conf
-
-passwd: files
-group: files
-shadow: files
-
-publickey: files
-
-hosts: files dns
-networks: files
-
-protocols: db files
-services: db files
-ethers: db files
-rpc: db files
-
-netgroup: db files
-
-# End /etc/nsswitch.conf
-<userinput>EOF</userinput></screen>
-
-<para>To find out what time zone you're in, run the following script:</para>
-
-<screen><userinput>tzselect</userinput></screen>
-
-<para>When you've answered a few questions about your location, the script will
-output the name of your time zone, something like <emphasis>EST5EDT</emphasis>
-or <emphasis>Canada/Eastern</emphasis>. Then create the
-<filename>/etc/localtime</filename> file by running:</para>
-
-<screen><userinput>cp --remove-destination /usr/share/zoneinfo/Canada/Eastern /etc/localtime</userinput></screen>
-
-<para>The meaning of the option:</para>
-
-<itemizedlist>
-<listitem><para><userinput>--remove-destination</userinput>: This is needed to
-force removal of the already existing symbolic link. The reason why we copy
-instead of symlink is to cover the situation where <filename>/usr</filename> is
-on a separate partition. This could matter, for example, when booted into single
-user mode.</para></listitem>
-</itemizedlist>
-
-<para>Of course, instead of <emphasis>Canada/Eastern</emphasis>, fill in
-the name of the time zone that the <command>tzselect</command> script
-gave you.</para>
-
-</sect2>
-
-<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
-
-<sect2>
-<title>Configuring Dynamic Loader</title>
-
-<para>By default, the dynamic loader
-(<filename>/lib/ld-linux.so.2</filename>) searches through <filename
-class="directory">/lib</filename> and <filename
-class="directory">/usr/lib</filename> for dynamic libraries that are needed
-by programs when you run them. However, if there are libraries in
-directories other than <filename class="directory">/lib</filename> and
-<filename class="directory">/usr/lib</filename>, you need to add them to
-the <filename>/etc/ld.so.conf</filename> file for the dynamic
-loader to find them. Two directories that are commonly known to contain
-additional libraries are <filename
-class="directory">/usr/local/lib</filename> and <filename
-class="directory">/opt/lib</filename>, so we add those directories to the
-dynamic loader's search path.</para>
-
-<para>Create a new file <filename>/etc/ld.so.conf</filename> by running the
-following:</para>
-
-<screen><userinput>cat &gt; /etc/ld.so.conf &lt;&lt; "EOF"</userinput>
-# Begin /etc/ld.so.conf
-
-/usr/local/lib
-/opt/lib
-
-# End /etc/ld.so.conf
-<userinput>EOF</userinput></screen>
-
-</sect2>
-
diff --git a/chapter06/config-keyboard.xml b/chapter06/config-keyboard.xml
deleted file mode 100644
index b8b85398a..000000000
--- a/chapter06/config-keyboard.xml
+++ /dev/null
@@ -1,31 +0,0 @@
-<sect2><title>Configuring your keyboard</title>
-
-<para>Few things are more annoying than using Linux while a wrong keymap
-for your keyboard is loaded. If you have a standard US keyboard, however, you
-can skip this section, as the US keymap is the default as long as you don't
-change it.</para>
-
-<para>To change the default keymap, create the
-<filename class="symlink">/usr/share/kbd/keymaps/defkeymap.map.gz</filename>
-symlink by running the following command:</para>
-
-<screen><userinput>ln -s path/to/keymap /usr/share/kbd/keymaps/defkeymap.map.gz</userinput></screen>
-
-<para>Of course, replace <filename>path/to/keymap</filename> with the path and
-name of your keyboard's map file. For example, if you have a Dutch keyboard,
-you would use <filename>i386/qwerty/nl.map.gz</filename>.</para>
-
-<para>Another way to set your keyboard's layout is to compile the keymap
-into the kernel. This ensures that your keyboard will always work as expected,
-even when you boot into maintenance mode (by passing `init=/bin/sh' to the
-kernel), as then the bootscript that normally sets up your keymap isn't run.</para>
-
-<para>Run the following command to patch the current default keymap into the
-kernel source. You will have to repeat this command whenever you unpack a
-new kernel:</para>
-
-<screen><userinput>loadkeys -m /usr/share/kbd/keymaps/defkeymap.map.gz &gt; \
-&nbsp;&nbsp;&nbsp;&nbsp;/usr/src/linux-&kernel-version;/drivers/char/defkeymap.c</userinput></screen>
-
-</sect2>
-
diff --git a/chapter06/config-sysklogd.xml b/chapter06/config-sysklogd.xml
deleted file mode 100644
index 72bc83a62..000000000
--- a/chapter06/config-sysklogd.xml
+++ /dev/null
@@ -1,23 +0,0 @@
-<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
-
-<sect2><title>Configuring Sysklogd</title>
-
-<para>Create a new file <filename>/etc/syslog.conf</filename> by running the
-following:</para>
-
-<screen><userinput>cat &gt; /etc/syslog.conf &lt;&lt; "EOF"</userinput>
-# Begin /etc/syslog.conf
-
-auth,authpriv.* -/var/log/auth.log
-*.*;auth,authpriv.none -/var/log/sys.log
-daemon.* -/var/log/daemon.log
-kern.* -/var/log/kern.log
-mail.* -/var/log/mail.log
-user.* -/var/log/user.log
-*.emerg *
-
-# End /etc/syslog.conf
-<userinput>EOF</userinput></screen>
-
-</sect2>
-
diff --git a/chapter06/config-sysvinit.xml b/chapter06/config-sysvinit.xml
deleted file mode 100644
index 8b1d9f887..000000000
--- a/chapter06/config-sysvinit.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
-
-<sect2><title>Configuring Sysvinit</title>
-
-<para>Create a new file <filename>/etc/inittab</filename> by running the
-following:</para>
-
-<screen><userinput>cat &gt; /etc/inittab &lt;&lt; "EOF"</userinput>
-# Begin /etc/inittab
-
-id:3:initdefault:
-
-si::sysinit:/etc/rc.d/init.d/rc sysinit
-
-l0:0:wait:/etc/rc.d/init.d/rc 0
-l1:S1:wait:/etc/rc.d/init.d/rc 1
-l2:2:wait:/etc/rc.d/init.d/rc 2
-l3:3:wait:/etc/rc.d/init.d/rc 3
-l4:4:wait:/etc/rc.d/init.d/rc 4
-l5:5:wait:/etc/rc.d/init.d/rc 5
-l6:6:wait:/etc/rc.d/init.d/rc 6
-
-ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
-
-su:S016:once:/sbin/sulogin
-
-1:2345:respawn:/sbin/agetty tty1 9600
-2:2345:respawn:/sbin/agetty tty2 9600
-3:2345:respawn:/sbin/agetty tty3 9600
-4:2345:respawn:/sbin/agetty tty4 9600
-5:2345:respawn:/sbin/agetty tty5 9600
-6:2345:respawn:/sbin/agetty tty6 9600
-
-# End /etc/inittab
-<userinput>EOF</userinput></screen>
-
-</sect2>
-
diff --git a/chapter06/config-vim.xml b/chapter06/config-vim.xml
deleted file mode 100644
index 7fa0650ac..000000000
--- a/chapter06/config-vim.xml
+++ /dev/null
@@ -1,29 +0,0 @@
-<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
-
-<sect2><title>Configuring Vim</title>
-
-<para>By default, <command>vim</command> runs in vi-compatible mode. Some
-people might like this, but we prefer to run <command>vim</command> in its
-own mode (else we wouldn't have included it in this book, but the original
-<command>vi</command>). Create a default vim configuration file by running
-the following:</para>
-
-<screen><userinput>cat &gt; /etc/vimrc &lt;&lt; "EOF"</userinput>
-" Begin /etc/vimrc
-
-set nocompatible
-set backspace=2
-syntax on
-
-" End /etc/vimrc
-<userinput>EOF</userinput></screen>
-
-<para>The <emphasis>set nocompatible</emphasis> will make
-<command>vim</command> behave in a more useful way than the default
-vi-compatible manner. The <emphasis>set backspace=2</emphasis> allows
-backspacing over line breaks, autoindent and the start of insert. And the
-<emphasis>syntax on</emphasis> switches on <command>vim</command>'s
-semantic colouring.</para>
-
-</sect2>
-
diff --git a/chapter06/glibc.xml b/chapter06/glibc.xml
index 5b8d60f4c..86dbcb09b 100644
--- a/chapter06/glibc.xml
+++ b/chapter06/glibc.xml
@@ -121,7 +121,99 @@ localedef -i ja_JP -f EUC-JP ja_JP</userinput></screen>
 
 </sect2>
 
-&c6-cf-glibc;
+<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
+
+<sect2><title>Configuring Glibc</title>
+
+<para>We need to create the <filename>/etc/nsswitch.conf</filename> file,
+because, although Glibc provides defaults when this file is missing or corrupt,
+the Glibc defaults don't work well with networking. Also, our time zone needs
+to be set up.</para>
+
+<para>Create a new file <filename>/etc/nsswitch.conf</filename> by running the
+following:</para>
+
+<screen><userinput>cat &gt; /etc/nsswitch.conf &lt;&lt; "EOF"</userinput>
+# Begin /etc/nsswitch.conf
+
+passwd: files
+group: files
+shadow: files
+
+publickey: files
+
+hosts: files dns
+networks: files
+
+protocols: db files
+services: db files
+ethers: db files
+rpc: db files
+
+netgroup: db files
+
+# End /etc/nsswitch.conf
+<userinput>EOF</userinput></screen>
+
+<para>To find out what time zone you're in, run the following script:</para>
+
+<screen><userinput>tzselect</userinput></screen>
+
+<para>When you've answered a few questions about your location, the script will
+output the name of your time zone, something like <emphasis>EST5EDT</emphasis>
+or <emphasis>Canada/Eastern</emphasis>. Then create the
+<filename>/etc/localtime</filename> file by running:</para>
+
+<screen><userinput>cp --remove-destination /usr/share/zoneinfo/Canada/Eastern /etc/localtime</userinput></screen>
+
+<para>The meaning of the option:</para>
+
+<itemizedlist>
+<listitem><para><userinput>--remove-destination</userinput>: This is needed to
+force removal of the already existing symbolic link. The reason why we copy
+instead of symlink is to cover the situation where <filename>/usr</filename> is
+on a separate partition. This could matter, for example, when booted into single
+user mode.</para></listitem>
+</itemizedlist>
+
+<para>Of course, instead of <emphasis>Canada/Eastern</emphasis>, fill in
+the name of the time zone that the <command>tzselect</command> script
+gave you.</para>
+
+</sect2>
+
+<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
+
+<sect2>
+<title>Configuring Dynamic Loader</title>
+
+<para>By default, the dynamic loader
+(<filename>/lib/ld-linux.so.2</filename>) searches through <filename
+class="directory">/lib</filename> and <filename
+class="directory">/usr/lib</filename> for dynamic libraries that are needed
+by programs when you run them. However, if there are libraries in
+directories other than <filename class="directory">/lib</filename> and
+<filename class="directory">/usr/lib</filename>, you need to add them to
+the <filename>/etc/ld.so.conf</filename> file for the dynamic
+loader to find them. Two directories that are commonly known to contain
+additional libraries are <filename
+class="directory">/usr/local/lib</filename> and <filename
+class="directory">/opt/lib</filename>, so we add those directories to the
+dynamic loader's search path.</para>
+
+<para>Create a new file <filename>/etc/ld.so.conf</filename> by running the
+following:</para>
+
+<screen><userinput>cat &gt; /etc/ld.so.conf &lt;&lt; "EOF"</userinput>
+# Begin /etc/ld.so.conf
+
+/usr/local/lib
+/opt/lib
+
+# End /etc/ld.so.conf
+<userinput>EOF</userinput></screen>
+
+</sect2>
 
 &aa-glibc-shortdesc;
 &aa-glibc-desc;
diff --git a/chapter06/kbd.xml b/chapter06/kbd.xml
index 34cea17fc..854be7e1a 100644
--- a/chapter06/kbd.xml
+++ b/chapter06/kbd.xml
@@ -35,7 +35,37 @@ not installed. First enable the compilation of these utilities:</para>
 
 </sect2>
 
-&c6-cf-keyboard;
+<sect2><title>Configuring your keyboard</title>
+
+<para>Few things are more annoying than using Linux while a wrong keymap
+for your keyboard is loaded. If you have a standard US keyboard, however, you
+can skip this section, as the US keymap is the default as long as you don't
+change it.</para>
+
+<para>To change the default keymap, create the
+<filename class="symlink">/usr/share/kbd/keymaps/defkeymap.map.gz</filename>
+symlink by running the following command:</para>
+
+<screen><userinput>ln -s path/to/keymap /usr/share/kbd/keymaps/defkeymap.map.gz</userinput></screen>
+
+<para>Of course, replace <filename>path/to/keymap</filename> with the path and
+name of your keyboard's map file. For example, if you have a Dutch keyboard,
+you would use <filename>i386/qwerty/nl.map.gz</filename>.</para>
+
+<para>Another way to set your keyboard's layout is to compile the keymap
+into the kernel. This ensures that your keyboard will always work as expected,
+even when you boot into maintenance mode (by passing `init=/bin/sh' to the
+kernel), as then the bootscript that normally sets up your keymap isn't run.</para>
+
+<para>When in <xref linkend="chapter-mixture"/> you're ready to compile the
+kernel, run the following command to patch the current default keymap into the
+source (you will have to repeat this command whenever you unpack a new
+kernel):</para>
+
+<screen><userinput>loadkeys -m /usr/share/kbd/keymaps/defkeymap.map.gz &gt; \
+&nbsp;&nbsp;&nbsp;&nbsp;/usr/src/linux-&kernel-version;/drivers/char/defkeymap.c</userinput></screen>
+
+</sect2>
 
 &aa-kbd-shortdesc;
 &aa-kbd-desc;
diff --git a/chapter06/mountproc.xml b/chapter06/mountproc.xml
deleted file mode 100644
index 876dbd5c5..000000000
--- a/chapter06/mountproc.xml
+++ /dev/null
@@ -1,55 +0,0 @@
-<sect1 id="ch-system-proc">
-<title>Mounting the proc and devpts file systems</title>
-<?dbhtml filename="proc.html" dir="chapter06"?>
-
-<para>In order for certain programs to function properly, the
-<emphasis>proc</emphasis> and <emphasis>devpts</emphasis> file systems must be
-available within the chroot environment. The proc file system is the process
-information pseudo file system through which the kernel provides information
-about the status of the system. And the devpts file system is nowadays the most
-common way pseudo terminals (PTYs) are implemented. Since kernel version 2.4, a
-file system can be mounted as many times and in as many places as you like,
-thus it's not a problem that these file systems are already mounted on your
-host system, especially so because they are virtual file systems.</para>
-
-<para>First become <emphasis>root</emphasis>, as only <emphasis>root</emphasis>
-can mount file systems in unusual places. Then check again that the LFS
-environment variable is set correctly by running <userinput>echo
-$LFS</userinput> and making sure it shows the path to your LFS partition's
-mount point, which is <filename class="directory">/mnt/lfs</filename> if you
-followed our example.</para>
-
-<para>Now make the mount points for these filesystems:</para>
-
-<screen><userinput>mkdir -p $LFS/{proc,dev/pts}</userinput></screen>
-
-<para>Mount the <emphasis>proc</emphasis> file system with:</para>
-
-<screen><userinput>mount proc $LFS/proc -t proc</userinput></screen>
-
-<para>And mount the <emphasis>devpts</emphasis> file system with:</para>
-
-<screen><userinput>mount devpts $LFS/dev/pts -t devpts</userinput></screen>
-
-<para>This last command might fail with an error like:</para>
-
-<blockquote><screen>filesystem devpts not supported by kernel</screen></blockquote>
-
-<para>The most likely cause for this is that your host system's kernel was
-compiled without support for the devpts file system. You can check which file
-systems your kernel supports by peeking into its internals with
-<command>cat /proc/filesystems</command>. If a file system type named
-<emphasis>devfs</emphasis> is listed there, then we'll be able to work around
-the problem by mounting the host's devfs file system on top of the new
-<filename>/dev</filename> structure which we'll create later on in the section
-on <xref linkend="ch-system-MAKEDEV"/>. If devfs was not listed, do not worry
-because there is yet a third way to get PTYs working inside the chroot
-environment. We'll cover this shortly in the aforementioned
-<xref linkend="ch-system-MAKEDEV"/> section.</para>
-
-<para>Remember that if for any reason you stop working on your LFS, and start
-again later, it's important to check that these file systems are mounted again
-before entering the chroot environment, otherwise problems could occur.</para>
-
-</sect1>
-
diff --git a/chapter06/sysklogd.xml b/chapter06/sysklogd.xml
index f23a151b1..9043544e8 100644
--- a/chapter06/sysklogd.xml
+++ b/chapter06/sysklogd.xml
@@ -26,7 +26,28 @@ as those given by the kernel when unusual things happen.</para>
 
 </sect2>
 
-&c6-cf-sysklogd;
+<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
+
+<sect2><title>Configuring Sysklogd</title>
+
+<para>Create a new <filename>/etc/syslog.conf</filename> file by running the
+following:</para>
+
+<screen><userinput>cat &gt; /etc/syslog.conf &lt;&lt; "EOF"</userinput>
+# Begin /etc/syslog.conf
+
+auth,authpriv.* -/var/log/auth.log
+*.*;auth,authpriv.none -/var/log/sys.log
+daemon.* -/var/log/daemon.log
+kern.* -/var/log/kern.log
+mail.* -/var/log/mail.log
+user.* -/var/log/user.log
+*.emerg *
+
+# End /etc/syslog.conf
+<userinput>EOF</userinput></screen>
+
+</sect2>
 
 &aa-sysklogd-shortdesc;
 &aa-sysklogd-desc;
diff --git a/chapter06/sysvinit.xml b/chapter06/sysvinit.xml
index 9d919ffeb..37e0046b5 100644
--- a/chapter06/sysvinit.xml
+++ b/chapter06/sysvinit.xml
@@ -16,15 +16,14 @@ running, and shutdown of your system.</para>
 <sect2>
 <title>Installation of Sysvinit</title>
 
-<para>When run levels are changed (for example, when halting the system),
-init sends the TERM and KILL signals to the processes which it started.
-Init prints "Sending processes the TERM signal" to the screen. This seems
-to imply that init is sending these signals to all the currently running
-processes. To avoid this confusion, the init.c file can be modified, so
-that the sentence reads "Sending processes started by init the TERM
-signal".</para>
-
-<para>Edit the halt message:</para>
+<para>When runlevels are changed (for example, when halting the system),
+<command>init</command> sends termination signals to those processes that it
+itself started and that shouldn't be running in the new runlevel. While doing
+this, <command>init</command> outputs messages like "Sending processes the TERM
+signal" which seem to imply that it is sending these signals to all currently
+running processes. To avoid this misinterpretation, you can modify the source
+so that these messages read like "Sending processes started by init the TERM
+signal" instead:</para>
 
 <screen><userinput>cp src/init.c{,.backup}
 sed 's/Sending processes/&amp; started by init/g' \
@@ -40,7 +39,43 @@ sed 's/Sending processes/&amp; started by init/g' \
 
 </sect2>
 
-&c6-cf-sysvinit;
+<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
+
+<sect2><title>Configuring Sysvinit</title>
+
+<para>Create a new <filename>/etc/inittab</filename> file by running the
+following:</para>
+
+<screen><userinput>cat &gt; /etc/inittab &lt;&lt; "EOF"</userinput>
+# Begin /etc/inittab
+
+id:3:initdefault:
+
+si::sysinit:/etc/rc.d/init.d/rc sysinit
+
+l0:0:wait:/etc/rc.d/init.d/rc 0
+l1:S1:wait:/etc/rc.d/init.d/rc 1
+l2:2:wait:/etc/rc.d/init.d/rc 2
+l3:3:wait:/etc/rc.d/init.d/rc 3
+l4:4:wait:/etc/rc.d/init.d/rc 4
+l5:5:wait:/etc/rc.d/init.d/rc 5
+l6:6:wait:/etc/rc.d/init.d/rc 6
+
+ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
+
+su:S016:once:/sbin/sulogin
+
+1:2345:respawn:/sbin/agetty tty1 9600
+2:2345:respawn:/sbin/agetty tty2 9600
+3:2345:respawn:/sbin/agetty tty3 9600
+4:2345:respawn:/sbin/agetty tty4 9600
+5:2345:respawn:/sbin/agetty tty5 9600
+6:2345:respawn:/sbin/agetty tty6 9600
+
+# End /etc/inittab
+<userinput>EOF</userinput></screen>
+
+</sect2>
 
 &aa-sysvinit-shortdesc;
 &aa-sysvinit-desc;
diff --git a/chapter06/vim.xml b/chapter06/vim.xml
index fdb2b9d59..fd23e5ef3 100644
--- a/chapter06/vim.xml
+++ b/chapter06/vim.xml
@@ -61,7 +61,34 @@ installed. For more information read the Vim documentation.</para>
 
 </sect2>
 
-&c6-cf-vim;
+<sect2><title>&nbsp;</title><para>&nbsp;</para></sect2>
+
+<sect2><title>Configuring Vim</title>
+
+<para>By default, <command>vim</command> runs in vi-compatible mode. Some
+people might like this, but we prefer to run <command>vim</command> in its
+own mode (else we wouldn't have included it in this book, but the original
+<command>vi</command>). Create a default vim configuration file by running
+the following:</para>
+
+<screen><userinput>cat &gt; /etc/vimrc &lt;&lt; "EOF"</userinput>
+" Begin /etc/vimrc
+
+set nocompatible
+set backspace=2
+syntax on
+
+" End /etc/vimrc
+<userinput>EOF</userinput></screen>
+
+<para>The <emphasis>set nocompatible</emphasis> will make
+<command>vim</command> behave in a more useful way than the default
+vi-compatible manner. The <emphasis>set backspace=2</emphasis> allows
+backspacing over line breaks, autoindent and the start of insert. And the
+<emphasis>syntax on</emphasis> switches on <command>vim</command>'s
+semantic colouring.</para>
+
+</sect2>
 
 &aa-vim-shortdesc;
 &aa-vim-desc;