Initial commit of alternative cross LFS

git-svn-id: http://svn.linuxfromscratch.org/LFS/branches/cross2@11897 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

1 files changed, 0 insertions, 113 deletions

diff --git a/chapter09/reboot.xml b/chapter09/reboot.xml
deleted file mode 100644
index c6a857dbd..000000000
--- a/chapter09/reboot.xml
+++ /dev/null
@@ -1,113 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-  <!ENTITY % general-entities SYSTEM "../general.ent">
-  %general-entities;
-]>
-
-<sect1 id="ch-finish-reboot">
-  <?dbhtml filename="reboot.html"?>
-
-  <title>Rebooting the System</title>
-
-  <para>Now that all of the software has been installed, it is time to reboot
-  your computer. However, you should be aware of a few things. The system you
-  have created in this book is quite minimal, and most likely will not have
-  the functionality you would need to be able to continue forward. By installing
-  a few extra packages from the BLFS book while still in our current chroot
-  environment, you can leave yourself in a much better position to continue on
-  once you reboot into your new LFS installation. Here are some suggestions:</para>
-
-  <itemizedlist>
-
-    <listitem><para>A text mode browser such as <ulink
-    url='&blfs-book;basicnet/lynx.html'>Lynx</ulink>
-    will allow you to easily view the BLFS book in one virtual terminal, while
-    building packages in another.</para></listitem>
-
-    <listitem><para>The <ulink
-    url='&blfs-book;general/gpm.html'>GPM</ulink> package will allow
-    you to perform copy/paste actions in your virtual
-    terminals.</para></listitem>
-
-    <listitem><para>If you are in a situation where static IP configuration
-    does not meet your networking requirements, installing a package
-    such as <ulink url='&blfs-book;basicnet/dhcpcd.html'>dhcpcd</ulink>
-    or the client portion of <ulink
-    url='&blfs-book;basicnet/dhcp.html'>dhcp</ulink> may be
-    useful.</para></listitem>
-
-    <listitem><para>Installing <ulink
-    url='&blfs-book;postlfs/sudo.html'>sudo</ulink> may be useful for
-    building packages as a non-root user and easily installing the resulting
-    packages in your new system.  </para></listitem>
-
-    <listitem><para>If you want to access your new system from a remote system
-    within a comfortable GUI environment, install <ulink
-    url='&blfs-book;postlfs/openssh.html'>openssh</ulink>. 
-    </para></listitem>
-
-    <listitem><para>To make fetching files over the internet easier, install
-    <ulink url='&blfs-book;basicnet/wget.html'>wget</ulink>.
-    </para></listitem>
-
-    <listitem><para>If one or more of your disk drives have a GUID partition
-    table (GPT), either <ulink
-    url='&blfs-book;postlfs/gptfdisk.html'>gptfdisk</ulink> or <ulink
-    url='&blfs-book;postlfs/parted.html'>parted</ulink> will be useful.
-    </para></listitem>
-
-    <listitem><para>Finally, a review of the following configuration files
-    is also appropriate at this point.  </para>
-
-      <itemizedlist>
-        <listitem><para>/etc/bashrc                  </para></listitem>
-        <listitem><para>/etc/dircolors               </para></listitem>
-        <listitem><para>/etc/fstab                   </para></listitem>
-        <listitem><para>/etc/hosts                   </para></listitem>
-        <listitem><para>/etc/inputrc                 </para></listitem>
-        <listitem><para>/etc/profile                 </para></listitem>
-        <listitem><para>/etc/resolv.conf             </para></listitem>
-        <listitem><para>/etc/vimrc                   </para></listitem>
-        <listitem><para>/root/.bash_profile          </para></listitem>
-        <listitem><para>/root/.bashrc                </para></listitem>
-        <listitem revision="sysv"><para>/etc/sysconfig/ifconfig.eth0 </para></listitem>
-      </itemizedlist>
-    </listitem>
-  </itemizedlist>
-
-  <para>Now that we have said that, let's move on to booting our shiny new LFS
-  installation for the first time! First exit from the chroot environment:</para>
-
-<screen><userinput>logout</userinput></screen>
-
-  <para>Then unmount the virtual file systems:</para>
-
-<screen><userinput>umount -v $LFS/dev/pts
-umount -v $LFS/dev
-umount -v $LFS/run
-umount -v $LFS/proc
-umount -v $LFS/sys</userinput></screen>
-
-  <para>Unmount the LFS file system itself:</para>
-
-<screen><userinput>umount -v $LFS</userinput></screen>
-
-  <para>If multiple partitions were created, unmount the other
-  partitions before unmounting the main one, like this:</para>
-
-<screen role="nodump"><userinput>umount -v $LFS/usr
-umount -v $LFS/home
-umount -v $LFS</userinput></screen>
-
-  <para>Now, reboot the system with:</para>
-
-<screen role="nodump"><userinput>shutdown -r now</userinput></screen>
-
-  <para>Assuming the GRUB boot loader was set up as outlined earlier, the menu
-  is set to boot <emphasis>LFS &version;</emphasis> automatically.</para>
-
-  <para>When the reboot is complete, the LFS system is ready for use and
-  more software may be added to suit your needs.</para>
-
-</sect1>