diff options
Diffstat (limited to 'bootscripts/contrib/lsb-v3/etc/init.d')
20 files changed, 0 insertions, 1634 deletions
diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/checkfs b/bootscripts/contrib/lsb-v3/etc/init.d/checkfs deleted file mode 100644 index 1e3efed9b..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/checkfs +++ /dev/null @@ -1,103 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/checkfs - -### BEGIN INIT INFO -# Provides: checkfs -# Required-Start: udev swap -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Checks local filesystems before mounting. -# Description: Checks local filesystmes before mounting. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - start) - if [ -f /fastboot ]; then - echo "${INFO}/fastboot found!" - log_success_msg "Will not perform file system checks as requested." - exit 0 - fi - - mount -n -o remount,ro / >/dev/null - if [ ${?} -ne 0 ] - then - log_failure_msg "Mounting root file system in read-only mode" - echo -e "${FAILURE}FAILURE:\n" - echo -e -n "${FAILURE}Cannot check root filesystem because it " - echo -e "${FAILURE}could not be mounted" - echo -e "${FAILURE}in read-only mode.\n\n" - echo -e -n "${FAILURE}After you press Enter, this system will be " - echo -e "${FAILURE}halted and powered off.\n" - echo -e "${INFO}Press enter to continue...${NORMAL}" - $FAILURE_ACTION - /etc/rc.d/init.d/halt stop - fi - - if [ -f /forcefsck ] - then - echo "${INFO}/forcefsck found!" - log_success_msg "${INFO}Forcing file system checks as requested." - options="-f" - else - options="" - fi - - # Note: -a option used to be -p; but this fails e.g. - # on fsck.minix - fsck ${options} -a -A -C -T - error_value=${?} - - if [ "${error_value}" -eq 0 ] - then - log_success_msg "Checking file systems..." - elif [ "${error_value}" -eq 1 ] - then - log_warning_msg "Checking file systems..." - echo -e "${WARNING}WARNING:\n" - echo -e "${WARNING}File system errors were found and have been" - echo -e "${WARNING}corrected. You may want to double-check that" - echo -e "${WARNING}everything was fixed properly.${NORMAL}" - elif [ "${error_value}" -eq 2 -o "${error_value}" -eq 3 ]; then - log_warning_msg "Checking file systems..." - echo -e "${WARNING}WARNING:\n" - echo -e "${WARNING}File system errors were found and have been been" - echo -e "${WARNING}corrected, but the nature of the errors require" - echo -e "${WARNING}this system to be rebooted.\n" - echo -e "After you press enter, this system will be rebooted.\n" - echo -e "${INFO}Press Enter to continue...${NORMAL}" - $FAILURE_ACTION - reboot -f - elif [ "${error_value}" -gt 3 -a "${error_value}" -lt 16 ]; then - log_failure_msg "Checking file systems..." - echo -e "${FAILURE}FAILURE:\n" - echo -e "${FAILURE}File system errors were encountered that could" - echo -e "${FAILURE}not be fixed automatically. This system cannot" - echo -e "${FAILURE}continue to boot and will therefore be halted" - echo -e "${FAILURE}until those errors are fixed manually by a" - echo -e "${FAILURE}System Administrator.\n" - echo -e "${FAILURE}After you press Enter, this system will be" - echo -e "${FAILURE}halted and powered off.\n" - echo -e "${INFO}Press Enter to continue...${NORMAL}" - $FAILURE_ACTION - /etc/rc.d/init.d/halt stop - elif [ "${error_value}" -ge 16 ]; then - log_failure_msg "Checking file systems..." - echo -e "${FAILURE}FAILURE:\n" - echo -e "${FAILURE}Unexpected Failure running fsck. Exited with error" - echo -e "${FAILURE}code: ${error_value}.${NORMAL}" - exit ${error_value} - fi - ;; - *) - echo "Usage: ${0} {start}" - exit 1 - ;; -esac - -# End /etc/init.d/checkfs diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/cleanfs b/bootscripts/contrib/lsb-v3/etc/init.d/cleanfs deleted file mode 100644 index 2e71456ee..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/cleanfs +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/cleanfs - -### BEGIN INIT INFO -# Provides: cleanfs -# Required-Start: $local_fs -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Cleans temporary directories early in the boot process. -# Description: Cleans temporary directories /var/run, /var/lock, and -# /tmp. cleanfs also creates /var/run/utmp and any files -# defined in /etc/default/createfiles. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -# Function to create files/directory on boot. -create_files() -{ - # Read in the configuration file. - exec 9>&0 < /etc/default/createfiles - while read name type perm usr grp dtype maj min junk - do - # Ignore comments and blank lines. - case "${name}" in - ""|\#*) continue ;; - esac - - # Ignore existing files. - if [ ! -e "${name}" ] - then - # Create stuff based on its type. - case "${type}" in - dir) - mkdir "${name}" - ;; - file) - :> "${name}" - ;; - dev) - case "${dtype}" in - char) - mknod "${name}" c ${maj} ${min} - ;; - block) - mknod "${name}" b ${maj} ${min} - ;; - pipe) - mknod "${name}" p - ;; - *) - echo -e -n "\n${WARNING}Unknown device type: ${dtype}" - echo -e "${NORMAL}" - ;; - esac - ;; - *) - echo -e "\n${WARNING}Unknown type: ${type}${NORMAL}" - continue - ;; - esac - - # Set up the permissions, too. - chown ${usr}:${grp} "${name}" - chmod ${perm} "${name}" - fi - done - exec 0>&9 9>&- -} - -case "${1}" in - start) - message="Cleaning file systems: " - - message="${message}${INFO} /tmp" - find /tmp -xdev -mindepth 1 ! -name lost+found \ - -delete || failed=1 - - > /var/run/utmp - if grep -q '^utmp:' /etc/group ; then - chmod 664 /var/run/utmp - chgrp utmp /var/run/utmp - fi - - (exit ${failed}) - evaluate_retval standard - - if egrep -qv '^(#|$)' /etc/default/createfiles 2>/dev/null - then - message="Creating files and directories..." - create_files - evaluate_retval standard - fi - ;; - *) - echo "Usage: ${0} {start}" - exit 1 - ;; -esac - -# End /etc/init.d/cleanfs - diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/console b/bootscripts/contrib/lsb-v3/etc/init.d/console deleted file mode 100644 index 45c87b6dd..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/console +++ /dev/null @@ -1,96 +0,0 @@ -#!/bin/sh -# Begin $rc_base/init.d/console - -### BEGIN INIT INFO -# Provides: console -# Required-Start: -# Should-Start: $local_fs -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Sets up a localised console. -# Description: Sets up fonts and language settings for the user's -# local as defined by /etc/default/console. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -MESSAGE="Setting up Linux console..." - -# Native English speakers probably don't have /etc/default/console at all -if [ -f /etc/default/console ] -then - . /etc/default/console -fi - -is_true() { - [ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ] -} - -failed=0 - -case "${1}" in - start) - # There should be no bogus failures below this line! - - # Figure out if a framebuffer console is used - [ -d /sys/class/graphics/fb0 ] && USE_FB=1 || USE_FB=0 - - # Figure out the command to set the console into the - # desired mode - is_true "${UNICODE}" && - MODE_COMMAND="echo -en '\033%G' && kbd_mode -u" || - MODE_COMMAND="echo -en '\033%@\033(K' && kbd_mode -a" - - # On framebuffer consoles, font has to be set for each vt in - # UTF-8 mode. This doesn't hurt in non-UTF-8 mode also. - - ! is_true "${USE_FB}" || [ -z "${FONT}" ] || - MODE_COMMAND="${MODE_COMMAND} && setfont ${FONT}" - - # Apply that command to all consoles mentioned in - # /etc/inittab. Important: in the UTF-8 mode this should - # happen before setfont, otherwise a kernel bug will - # show up and the unicode map of the font will not be - # used. - # FIXME: Fedora Core also initializes two spare consoles - # - do we want that? - - for TTY in `grep '^[^#].*respawn:/sbin/agetty' /etc/inittab | - grep -o '\btty[[:digit:]]*\b'` - do - openvt -f -w -c ${TTY#tty} -- \ - /bin/sh -c "${MODE_COMMAND}" || failed=1 - done - - # Set the font (if not already set above) and the keymap - is_true "${USE_FB}" || [ -z "${FONT}" ] || - setfont $FONT || - failed=1 - [ -z "${KEYMAP}" ] || - loadkeys ${KEYMAP} >/dev/null 2>&1 || - failed=1 - [ -z "${KEYMAP_CORRECTIONS}" ] || - loadkeys ${KEYMAP_CORRECTIONS} >/dev/null 2>&1 || - failed=1 - - # Convert the keymap from $LEGACY_CHARSET to UTF-8 - [ -z "$LEGACY_CHARSET" ] || - dumpkeys -c "$LEGACY_CHARSET" | - loadkeys -u >/dev/null 2>&1 || - failed=1 - - # If any of the commands above failed, the trap at the - # top would set $failed to 1 - ( exit $failed ) - evaluate_retval standard - ;; - *) - echo $"Usage:" "${0} {start}" - exit 1 - ;; -esac - -# End $rc_base/init.d/console diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/halt b/bootscripts/contrib/lsb-v3/etc/init.d/halt deleted file mode 100644 index cdcd90778..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/halt +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/sh -# Begin $RC_BASE/init.d/halt - -### BEGIN INIT INFO -# Provides: halt -# Required-Start: -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: 0 -# Default-Stop: -# Short-Description: Halts the system. -# Description: Halts the System. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - stop) - log_success_msg "Halting System..." - halt -d -f -i -p - ;; - *) - echo "Usage: {stop}" - exit 1 - ;; -esac - -# End /etc/init.d/halt diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/lfs-functions b/bootscripts/contrib/lsb-v3/etc/init.d/lfs-functions deleted file mode 100644 index b0fef4c29..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/lfs-functions +++ /dev/null @@ -1,214 +0,0 @@ -# Begin /etc/init.d/lfs-functions -# Provides LFS specific functions for LSB style bootscripts - -################################# chkstat() ################################### -# chk_stat checks the status of a script by checking for both a binary file # -# to execute, and if set, a config file that may be needed for the program # -# to run successfully. The calling script will exit with a return value of 5 # -# if the binary does not exist, and a value of 6 if the needed config file is # -# unavailable as per LSB requirements. This function accepts zero, one, or # -# two string arguments. If arguments are passed, the first must be a bin # -# file. If a second argument is passed, it is interpreted as the config # -# file. Optionally, zero arguments can be passed if BIN_FILE, and optinally # -# CONFIG_FILE are set in the calling script. # -############################################################################### -chk_stat() -{ - if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then - BIN_FILE="${1}" - if [ -z "${2}" ]; then - CONFIG_FILE="" - else - CONFIG_FILE="${2}" - fi - elif [ -z "${BIN_FILE}" ]; then - echo "Usage: 'chk_stat BIN_FILE CONFIG_FILE'" - exit 1 # Generic Error - fi - - if [ ! -e "${BIN_FILE}" ]; then - log_failure_msg "${BIN_FILE} not installed" && - exit 5 - fi - - if [ ! -z "${CONFIG_FILE}" ]; then - if [ ! -e "${CONFIG_FILE}" ]; then - log_failure_msg "${CONFIG_FILE} does not exist" && - exit 6 - fi - fi -} - -################################ loadproc() ################################### -# loadproc is just a wraper to start_daemon for simple scripts, which will # -# require no arguments if $BIN_FILE is set. # -############################################################################### -loadproc() -{ - start_daemon "${BIN_FILE}" "${@}" -} - -################################ endproc() #################################### -# endproc, like loadproc, is just a wraper to killproc for simplicity and is # -# dependent on $BIN_FILE being set. # -############################################################################### -endproc() -{ - killproc "${BIN_FILE}" "${@}" -} - -############################### statusproc() ################################## -# statusproc checks the status of a particular binary and displays the # -# appropriate message (running or not running) and exits on the return value # -# of pidofproc. This function accepts two string arguments or zero arguments # -# if BIN_FILE and MESSAGE are set, else it requires the bin file as the first # -# argument, and the message as the second. Both must be enclosed in quotes. # -############################################################################### -statusproc() -{ - if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then - BIN_FILE="${1}" - MESSAGE="${2}" - elif [ -z "${BIN_FILE}" -o -z "${MESSAGE}" ]; then - echo "Usage: 'statusproc BIN_FILE MESSAGE'" - exit 1 # Generic Error - fi - - pidlist=`pidofproc "${BIN_FILE}"` - STATUS=$? - echo "Checking ${MESSAGE} status:" - if [ "${STATUS}" -eq "0" ]; then - log_success_msg "Running with PID(s) ${pidlist}" - else - log_warning_msg "Not running!" - fi - - return "${STATUS}" -} - -############################### reloadproc() ################################## -# reloadproc sends a HUP signal to the running program (relaod configuration) # -# It optionally, using the -force switch, checks the status of a particular # -# program and starts it if it is not already running. This function accepts # -# one optional switch (must be the first argument), and either two, or zero # -# string arguments. If BIN_FILE and MESSAGE are set in the script's # -# environment, it will use those values, else it requires the bin file as # -# the first argument (following -force if used), and the message as the # -# second. Both must be enclosed in quotes. If the force option is used, it # -# follows the LSB definition of 'force-reload' - the program is started if # -# not already running. # -############################################################################### -reloadproc() -{ - local force="0" - if [ "${#}" -gt "0" -a "${1}" = "-force" ]; then - force="1" - shift 1 - fi - - if [ "${#}" -gt "0" -a "${#}" -lt "3" ]; then - BIN_FILE="${1}" - MESSAGE="${2}" - elif [ -z "${BIN_FILE}" -o -z "${MESSAGE}" ]; then - echo "Usage: 'reloadproc BIN_FILE MESSAGE'" - exit 1 # Generic Error - fi - - - -} - -############################## evaluate_retval() ############################### -# evaluate_retval requires that you pass exactly one evaluation parameter of # -# (start, stop, other) based on the previous action that is being evaluated. # -# This function is intended for use with start_daemon and killproc to # -# interpret the LSB exit codes properly, othewise the checks only for success # -# or failure. # -################################################################################ -evaluate_retval() -{ - local error_value="${?}" - - # Handle LSB defined return values - case "${1}" in - - start) - case "${error_value}" in - 0) - log_success_msg "Starting ${MESSAGE} " - return "${error_value}" - ;; - 2) - log_failure_msg "Starting ${MESSAGE} Error: Invalid argument!" - return "${error_value}" - ;; - 5) - log_failure_msg "Starting ${MESSAGE} Error: Not available!" - return "${error_value}" - ;; - *) - log_failure_msg "Starting ${MESSAGE} Error: General failure!" - return "${error_value}" - ;; - esac - ;; - - stop) - case "${error_value}" in - 0) - log_success_msg "Stopping ${MESSAGE} " - return "${error_value}" - ;; - 2) - log_failure_msg "Stopping ${MESSAGE} Error: Invalid argument!" - return "${error_value}" - ;; - 5) - log_failure_msg "Stopping ${MESSAGE} Error: Not available!" - return "${error_value}" - ;; - 7) - log_warning_msg "Stopping ${MESSAGE} Warning: Not running!" - return "${error_value}" - ;; - *) - log_failure_msg "Stopping ${MESSAGE} Error: General failure!" - return "${error_value}" - ;; - esac - ;; - - force-reload) - message="Forcefully reloading " - ;; - - reload) - message="Reloading " - ;; - - restart) - message="Restarting " - ;; - - try-restart) - message="Trying restart " - ;; - - standard) - # $message or $MESSAGE must be set, but not both in order - # to use the 'standard' target. - ;; - esac - - # Print messages for the generic force-reload, reload, restart, - # and try-restart targets - if [ "${error_value}" -eq "0" ] - then - log_success_msg "${message}${MESSAGE} " - return "${error_value}" - else - log_failure_msg "${message}${MESSAGE} " - return "${error_value}" - fi -} - diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/localnet b/bootscripts/contrib/lsb-v3/etc/init.d/localnet deleted file mode 100644 index 322bb8749..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/localnet +++ /dev/null @@ -1,81 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/localnet - -### BEGIN INIT INFO -# Provides: localnet -# Required-Start: $local_fs -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Starts the local network. -# Description: Sets the hostname of the machine and starts the -# loopback interface. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - start) - ip addr add 127.0.0.1/8 label lo dev lo - ip link set lo up - if [ "${?}" -eq "0" ] - then - log_success_msg "Bringing up the loopback interface..." - else - log_failure_msg "Bringing up the loopback interface..." - fi - - hostname "${HOSTNAME}" - if [ "${?}" -eq "0" ] - then - log_success_msg "Setting hostname to ${HOSTNAME}..." - else - log_failure_msg "Setting hostname to ${HOSTNAME}..." - fi - - ;; - - stop) - ip link set lo down - if [ "${?}" -eq "0" ] - then - log_success_msg "Bringing down the loopback interface..." - else - log_failure_msg "Bringing down the loopback interface..." - fi - - ;; - - restart) - ip link set lo down - retval="${?}" - sleep 1 - ip addr add 127.0.0.1/8 label lo dev lo - retval=$(( "${retval}" + "${?}" )) - ip link set lo up - retval=$(( "${retval}" + "${?}" )) - hostname "${HOSTNAME}" - retval=$(( "${retval}" + "${?}" )) - if [ "${retval}" -eq "0" ] - then - log_success_msg "Restarting local network..." - else - log_failure_msg "Restarting local network..." - fi - ;; - - status) - log_success_msg "Hostname is: ${INFO}$(hostname)${NORMAL}" - ip link show lo - ;; - - *) - echo "Usage: ${0} {start|stop|restart|status}" - exit 1 - ;; -esac - -# End /etc/init.d/localnet diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/modules b/bootscripts/contrib/lsb-v3/etc/init.d/modules deleted file mode 100644 index 18febfbc0..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/modules +++ /dev/null @@ -1,97 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/modules - -### BEGIN INIT INFO -# Provides: modules -# Required-Start: mountvirtfs sysctl -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Loads required modules. -# Description: Loads modules listed in /etc/default/modules. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -# Assure that the kernel has module support. -[ -e /proc/ksyms -o -e /proc/modules ] || exit 0 - -case "${1}" in - start) - - # Exit if there's no modules file or there are no - # valid entries - [ -r /etc/default/modules ] && - egrep -qv '^($|#)' /etc/default/modules || - exit 0 - - # If proc is mounted, find the current kernel - # message level - if [ -f /proc/sys/kernel/printk ]; then - prev_msg=`cat /proc/sys/kernel/printk | \ - sed 'l 1' | sed -n '2~0p' | \ - sed 's/\\\//'` - else - prev_msg="6" - fi - - # Now set the message level to 1 so not to make too - # much noise when loading modules - dmesg -n 1 - - # Only try to load modules if the user has actually given us - # some modules to load. - if egrep -qv '^(#|$)' /etc/default/modules 2>/dev/null - then - - # Read in the configuration file. - exec 9>&0 < /etc/default/modules - - message="${INFO}Loading modules:" - - while read module args - do - # Ignore comments and blank lines. - case "${module}" in - ""|\#*) continue ;; - esac - - # Attempt to load the module, making - # sure to pass any arguments provided. - modprobe ${module} ${args} > /dev/null - - # Print the module name if successful, - # otherwise take note. - if [ ${?} -eq 0 ]; then - message="${message}${NORMAL} ${module}" - else - failedmod="${failedmod} ${module}" - fi - done - - # Print a message about successfully loaded - # modules on the correct line. - log_success_msg "${message}" - - # Print a failure message with a list of any - # modules that may have failed to load. - if [ "${failedmod}" ]; then - log_failure_msg "${FAILURE}Failed to load modules:${failedmod}" - fi - - exec 0>&9 9>&- - - fi - # Set the kernel message level back to it's previous value. - dmesg -n "${prev_msg}" - ;; - *) - echo "Usage: ${0} {start}" - exit 1 - ;; -esac - -# End /etc/init.d/modules diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/mountfs b/bootscripts/contrib/lsb-v3/etc/init.d/mountfs deleted file mode 100644 index 562db546a..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/mountfs +++ /dev/null @@ -1,59 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/mountfs - -### BEGIN INIT INFO -# Provides: $local_fs -# Required-Start: udev checkfs -# Should-Start: -# Required-Stop: swap -# Should-Stop: -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Mounts/unmounts local filesystems defined in /etc/fstab. -# Description: Remounts root filesystem read/write and mounts all -# remaining local filesystems defined in /etc/fstab on -# start. Remounts root filesystem read-only and unmounts -# remaining filesystems on stop. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - start) - message="Remounting root file system in read-write mode..." - mount -n -o remount,rw / >/dev/null - evaluate_retval standard - - # Remove fsck-related file system watermarks. - rm -f /fastboot /forcefsck - - message="Recording existing mounts in /etc/mtab..." - > /etc/mtab - mount -f / || failed=1 - mount -f /proc || failed=1 - mount -f /sys || failed=1 - mount -f /run || failed=1 - (exit ${failed}) - evaluate_retval standard - - # This will mount all filesystems that do not have _netdev in - # their option list. _netdev denotes a network filesystem. - message="Mounting remaining file systems..." - mount -a -O no_netdev >/dev/null - evaluate_retval standard - ;; - - stop) - message="Unmounting all other currently mounted file systems..." - umount -a -d -r >/dev/null - evaluate_retval standard - ;; - - *) - echo "Usage: ${0} {start|stop}" - exit 1 - ;; -esac - -# End /etc/init.d/mountfs diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/mountvirtfs b/bootscripts/contrib/lsb-v3/etc/init.d/mountvirtfs deleted file mode 100644 index 994976934..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/mountvirtfs +++ /dev/null @@ -1,46 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/mountvirtfs - -### BEGIN INIT INFO -# Provides: mountvirtfs -# Required-Start: -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Mounts /sys, /proc, and /run virtual (virtel) filesystems. -# Description: Mounts /sys, /proc, and run virtual (virtel) filesystems. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - start) - message="Mounting virtel-based file systems:" - - if ! mountpoint /proc > /dev/null; then - message="${message}${INFO} /proc${NORMAL}" - mount -n /proc || failed=1 - fi - - if ! mountpoint /sys > /dev/null; then - message="${message}${INFO} /sys${NORMAL}" - mount -n /sys || failed=1 - fi - - # create needed directories in /run - mkdir /run/{var,lock,shm} || failed=1 - - (exit ${failed}) - evaluate_retval standard - ;; - - *) - echo "Usage: ${0} {start}" - exit 1 - ;; -esac - -# End /etc/init.d/mountvirtfs diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/network b/bootscripts/contrib/lsb-v3/etc/init.d/network deleted file mode 100644 index ec11d5e38..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/network +++ /dev/null @@ -1,70 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/network - -### BEGIN INIT INFO -# Provides: $network -# Required-Start: $local_fs swap localnet -# Should-Start: $syslog -# Required-Stop: $local_fs swap localnet -# Should-Stop: $syslog -# Default-Start: 3 4 5 -# Default-Stop: 0 1 2 6 -# Short-Description: Starts and configures network interfaces. -# Description: Starts and configures network interfaces. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - start) - # Start all network interfaces - for file in ${NETWORK_DEVICES}/ifconfig.* - do - interface=${file##*/ifconfig.} - - # skip if $file is * (because nothing was found) - if [ "${interface}" = "*" ] - then - continue - fi - IN_BOOT=1 /sbin/ifup ${interface} - done - ;; - - stop) - # Reverse list - FILES="" - for file in /run/network/ifconfig.* - do - FILES="${file} ${FILES}" - done - - # Stop all network interfaces - for file in ${FILES} - do - interface=${file##*/ifconfig.} - - # skip if $file is * (because nothing was found) - if [ "${interface}" = "*" ] - then - continue - fi - - IN_BOOT=1 /sbin/ifdown ${interface} - done - ;; - - restart) - ${0} stop - sleep 1 - ${0} start - ;; - - *) - echo "Usage: ${0} {start|stop|restart}" - exit 1 - ;; -esac - -# End /etc/init.d/network diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/rc b/bootscripts/contrib/lsb-v3/etc/init.d/rc deleted file mode 100644 index edad963a5..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/rc +++ /dev/null @@ -1,201 +0,0 @@ -#!/bin/sh -# Begin $RC_BASE/init.d/rc - -# Get the configuration file -# All changes are to occur in the config file -. /etc/default/rc - -# These 3 signals will not cause our script to exit -trap "" INT QUIT TSTP - -# Simple sanity check - rc only takes one argument -if [ "${#}" -ne 1 ]; then - echo "Usage: ${0} <runlevel>" >&2 - exit 1 -fi - -# Do not use the RUNLEVEL and PREVLEVEL variables provided by init so -# that they can be modified and alternate directories (S) can -# be used without affecting init -runlevel="${1}" -prevlevel="${PREVLEVEL}" - -# Just in case - some flavors of init don't set PREVLEVEL to 'N' -if [ "${prevlevel}" = "" ]; then - prevlevel="N" -fi - -# Mount /run -if [ "${runlevel}" = "S" ]; then - mount -n -t tmpfs tmpfs /run -fi - -# Provide an interactive prompt (if requested) -if [ "${runlevel}" = "S" -a "${iprompt}" = "yes" ]; then - # ash does not accept t and n flags for read - ls -l /bin/sh | grep "/ash" - if [ "${?}" -eq "0" ]; then - # We are using ash - echo -e -n "${WARNING}WARNING: Either bash or zsh is required" - echo -e "${WARNING} for interactive startup.\n" - sleep 3 - else - echo "" - # dcol and icol are spaces before the message to center the - # message on screen. - dcol=$(( $(( ${COLUMNS} - ${dlen} )) / 2 )) - icol=$(( $(( ${COLUMNS} - ${ilen} )) / 2 )) - echo -e "\\033[${dcol}G${welcome_message}" - echo -e "\\033[${icol}G${i_message}${NORMAL}" - echo "" - read -t "${itime}" -n 1 interactive 2>&1 > /dev/null - if [ "${interactive}" = "I" -o "${interactive}" = "i" ]; then - echo -n -e "${CURS_UP}" - echo -e "${INFO}Interactive boot selected...${NORMAL}" - echo "interactive=I" > /run/.interactive-start - fi - fi -fi - - -# Verify that the directory exists -if [ ! -d "${RC_BASE}/rc${runlevel}.d" ]; then - echo -n -e "${WARNING}${RC_BASE}/rc${runlevel}.d does not exist." - echo -e "${NORMAL}" - exit 1 -fi - -# Source the interactive state file if it exists -if [ "${runlevel}" != "S" -a -f /run/.interactive-start ]; then - . /run/.interactive-start -fi - -# Prompt for interactive startup after completing S -if [ "${interactive}" = "I" -a "${runlevel}" != "S" -a \ - "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then - echo -n -e "Proceed with interactive starup of runlevel " - echo -n -e "${INFO}${runlevel}${NORMAL}?" - echo -n -e "(${FAILURE}y${NORMAL})es/(${FAILURE}n${NORMAL})o " - read -n 1 go_on - echo "" - if [ "${go_on}" = "n" ]; then - # don't continue - exit 0 - fi -fi - - -# Attempt to stop all services started in the previous runlevel, -# that are stopped in this runlevel -if [ "${prevlevel}" != "N" ]; then - for link in $(ls -v ${RC_BASE}/rc${runlevel}.d/K* 2> /dev/null) - do - # Check to see if link is a valid symlink - if [ ! -f ${link} ]; then - echo -e "${WARNING}${link} is not a valid symlink." - continue # go on to the next K* link - fi - - # Check to see if link is executable - if [ ! -x ${link} ]; then - echo -e "${WARNING}${link} is not executable, skipping." - continue # go on to the next K* link - fi - - script=${link#$RC_BASE/rc$runlevel.d/K[0-9][0-9]} - prev_start=$RC_BASE/rc$prevlevel.d/S[0-9][0-9]$script - S_start=$RC_BASE/rcS.d/S[0-9][0-9]$script - - if [ "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then - if [ ! -f ${prev_start} ] && [ ! -f ${S_start} ]; then - echo -e -n "${WARNING}WARNING:\n\n${link} can't be" - echo -e "${WARNING} executed because it was not" - echo -e -n "${WARNING} not started in the previous" - echo -e "${WARNING} runlevel (${prevlevel})." - echo -e "${NORMAL}" - continue - fi - fi - ${link} stop - error_value=${?} - - if [ "${error_value}" -ne "0" ]; then - print_error_msg - fi - done -fi - -# Start all functions in this runlevel if they weren't started in -# the previous runlevel -for link in $(ls -v ${RC_BASE}/rc${runlevel}.d/S* 2> /dev/null) -do - if [ "${prevlevel}" != "N" ]; then - script=${link#$RC_BASE/rc$runlevel.d/S[0-9][0-9]} - stop=$RC_BASE/rc$runlevel.d/K[0-9][0-9]$script - prev_start=$RC_BASE/rc$prevlevel.d/S[0-9][0-9]$script - - [ -f ${prev_start} ] && [ ! -f ${stop} ] && continue - fi - - # Check to see if link is a valid symlink - if [ ! -f ${link} ]; then - echo -e "${WARNING}${link} is not a valid symlink." - continue # go on to the next K* link - fi - - # Check to see if link is executable - if [ ! -x ${link} ]; then - echo -e "${WARNING}${link} is not executable, skipping." - continue # go on to the next K* link - fi - - case ${runlevel} in - 0|6) - ${link} stop - ;; - - *) - if [ "${interactive}" = "I" -o "${interactive}" = "i" ]; then - echo -e -n "${WARNING}Start ${INFO}${link} ${WARNING}?" - echo -e -n "${NORMAL}(${FAILURE}y${NORMAL})es/(${FAILURE}n${NORMAL})o " - read -n 1 startit 2>&1 > /dev/null - echo "" - if [ "${startit}" = "y" -o "${startit}" = "Y" ]; then - ${link} start - else - echo -e -n "${WARNING}Not starting ${INFO}${link}" - echo -e "${WARNING}.${NORMAL}\n" - fi - else - ${link} start - fi - ;; - esac - error_value=${?} - - if [ "${error_value}" -gt "1" ]; then - print_error_msg - fi -done - -# Strip apply time to the logs, strip out any color codes and dump -# the log to /var/log/boot.log -if [ -f /run/.bootlog -a "${runlevel}" != "S" ]; then - # Remove any color codes from the temp log file - sed -i 's@\\033\[[0-9];[0-9][0-9]m@@g' /run/.bootlog - #Fix the time and hostname - BTIMESPEC=$(echo `date +"%b %d %T"` `hostname`) - sed -i "s@^bootlog:@${BTIMESPEC} bootlog:@" /run/.bootlog - # Don't try and write in 0 and 6, this is a 'boot' log - if [ "${runlevel}" != "0" -a "${runlevel}" != "6" ]; then - cat /run/.bootlog >> /var/log/boot.log - rm -f /run/.bootlog - fi -fi - -# Remove interactive boot temp file -if [ -f /run/.interactive-start -a "${runlevel}" != "S" ]; then - rm -f /run/.interactive-start -fi - -# End $RC_BASE/init.d/rc diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/reboot b/bootscripts/contrib/lsb-v3/etc/init.d/reboot deleted file mode 100644 index 56e948a3f..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/reboot +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/reboot - -### BEGIN INIT INFO -# Provides: reboot -# Required-Start: -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: 6 -# Default-Stop: -# Short-Description: Reboots the system. -# Description: Reboots the System. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - stop) - log_success_msg "Restarting system..." - reboot -d -f -i - ;; - - *) - echo "Usage: ${0} {stop}" - exit 1 - ;; - -esac - -# End /etc/init.d/reboot diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/sendsignals b/bootscripts/contrib/lsb-v3/etc/init.d/sendsignals deleted file mode 100644 index 2cd9df84a..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/sendsignals +++ /dev/null @@ -1,54 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/sendsignals - -### BEGIN INIT INFO -# Provides: sendsignals -# Required-Start: -# Should-Start: -# Required-Stop: $local_fs swap localnet -# Should-Stop: -# Default-Start: -# Default-Stop: 0 6 -# Short-Description: Attempts to kill remaining processes. -# Description: Attempts to kill remaining processes. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - stop) - message="Sending all processes the TERM signal..." - killall5 -15 - error_value=${?} - # Account for successful return value of 2 - if [ ${error_value} -eq 2 ]; then - error_value=0 - fi - sleep 3 - - (exit ${error_value}) - evaluate_retval standard - - message="Sending all processes the KILL signal..." - killall5 -9 - error_value=${?} - # Account for successful return value of 2 - if [ ${error_value} -eq 2 ]; then - error_value=0 - fi - - sleep 3 - - (exit ${error_value}) - evaluate_retval standard - ;; - - *) - echo "Usage: ${0} {stop}" - exit 1 - ;; - -esac - -# End /etc/init.d/sendsignals diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/setclock b/bootscripts/contrib/lsb-v3/etc/init.d/setclock deleted file mode 100644 index 5d47b8dc8..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/setclock +++ /dev/null @@ -1,54 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/setclock - -### BEGIN INIT INFO -# Provides: hwclock -# Required-Start: -# Should-Start: modules -# Required-Stop: -# Should-Stop: $syslog -# Default-Start: -# Default-Stop: -# Short-Description: Stores and restores time from the hardware clock -# Description: On boot, system time is obtained from hwclock. The -# hardware clock can also be set on shutdown. -# X-LFS-Provided-By: LFS BLFS -### END INIT INFO - -. /lib/lsb/init-functions - -BIN_FILE="/sbin/hwclock" - -chk_stat - -case "${UTC}" in - yes|true|1) - CLOCKPARAMS="${CLOCKPARAMS} --utc" - ;; - - no|false|0) - CLOCKPARAMS="${CLOCKPARAMS} --localtime" - ;; - -esac - -case ${1} in - start) - message="Setting system clock..." - ${BIN_FILE} --hctosys ${CLOCKPARAMS} >/dev/null - evaluate_retval standard - ;; - - stop) - message="Setting hardware clock..." - ${BIN_FILE} --systohc ${CLOCKPARAMS} >/dev/null - evaluate_retval standard - ;; - - *) - echo "Usage: ${0} {start|stop}" - ;; - -esac - -# End /etc/init.d/setclock diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/swap b/bootscripts/contrib/lsb-v3/etc/init.d/swap deleted file mode 100644 index 31e5591e5..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/swap +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/swap - -### BEGIN INIT INFO -# Provides: swap -# Required-Start: udev -# Should-Start: modules -# Required-Stop: localnet -# Should-Stop: -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Mounts and unmounts swap partitions. -# Description: Mounts and unmounts swap partitions defined in -# /etc/fstab. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - start) - message="Activating all swap files/partitions..." - swapon -a - evaluate_retval standard - ;; - - stop) - message="Deactivating all swap files/partitions..." - swapoff -a - evaluate_retval standard - ;; - - restart) - swapoff -a - error_level="${?}" - sleep 1 - swapon -a - error_level="$(( ${error_level} + ${?} ))" - (exit "${error_level}") - evaluate_retval restart - ;; - - status) - log_success_msg "Retrieving swap status..." - echo - swapon -s - ;; - - *) - echo "Usage: ${0} {start|stop|restart|status}" - exit 1 - ;; -esac - -# End /etc/init.d/swap diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/sysctl b/bootscripts/contrib/lsb-v3/etc/init.d/sysctl deleted file mode 100644 index cccff126e..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/sysctl +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/sysctl - -### BEGIN INIT INFO -# Provides: sysctl -# Required-Start: mountvirtfs -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Makes changes to the proc filesystem -# Description: Makes changes to the proc filesystem as defined in -# /etc/sysctl.conf. See 'man sysctl(8)'. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - start) - if [ -f "/etc/sysctl.conf" ]; then - message="Setting kernel runtime parameters..." - sysctl -q -p - evaluate_retval standard - fi - ;; - - status) - sysctl -a - ;; - - *) - echo "Usage: ${0} {start|status}" - exit 1 - ;; -esac - -# End /etc/init.d/sysctl diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/sysklogd b/bootscripts/contrib/lsb-v3/etc/init.d/sysklogd deleted file mode 100644 index dc8829f07..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/sysklogd +++ /dev/null @@ -1,69 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/sysklogd - -### BEGIN INIT INFO -# Provides: $syslog -# Required-Start: localnet -# Should-Start: -# Required-Stop: $local_fs sendsignals -# Should-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Starts kernel and system log daemons. -# Description: Starts kernel and system log daemons. -# /etc/fstab. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -case "${1}" in - start) - MESSAGE="system log daemon..." - start_daemon /sbin/syslogd -m 0 - evaluate_retval start - - MESSAGE="kernel log daemon..." - start_daemon /sbin/klogd - evaluate_retval start - ;; - - stop) - MESSAGE="kernel log daemon..." - killproc /sbin/klogd - evaluate_retval stop - - MESSAGE="system log daemon..." - killproc /sbin/syslogd - evaluate_retval stop - ;; - - force-reload) - MESSAGE="system log daemon config file..." - killproc -HUP `/sbin/syslogd` - evaluate_retval reload - ;; - - restart) - MESSAGE="system and kernel log deamons..." - failed=0 - killproc /sbin/klogd || failed=1 - killproc /sbin/syslogd || failed=1 - start_daemon /sbin/syslogd -m 0 || failed=1 - start_daemon /sbin/klogd || failed=1 - (exit ${failed}) - evaluate_retval restart - ;; - - status) - statusproc /sbin/syslogd - statusproc /sbin/klogd - ;; - - *) - echo "Usage: ${0} {start|stop|force-reload|restart|status}" - exit 1 - ;; -esac - -# End /etc/init.d/sysklogd diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/template b/bootscripts/contrib/lsb-v3/etc/init.d/template deleted file mode 100644 index d10d98c56..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/template +++ /dev/null @@ -1,90 +0,0 @@ -#!/bin/sh -# Begin /etc/init.d/template - -### BEGIN INIT INFO -# Provides: template -# Required-Start: -# Should-Start: -# Required-Stop: -# Should-Stop: -# Default-Start: -# Default-Stop: -# Short-Description: -# Description: -# X-LFS-Provided-By: -### END INIT INFO - -# Source the LSB init-functions, ours are pulled in from there. -. /lib/lsb/init-functions - -# These are optional, but required for chk_stat. They will be used in -# the rest of the functions if defined, else you must provide a program -# name to control, and a message ('Starting Template Service...' -# or 'Stoping Template Service...') to evauate_retval. See the -# documentaion in the lfs-fucntions file for more information. -MESSAGE="Template Service" -BIN_FILE="/some/path/to/template" -CONFIGFILE="/etc/default/template.conf" - -# check that $BIN_FILE exists and is executable, and $CONFIGFILE exists. -chk_stat - -# LSB Defined functions require that at least $BIN_FILE be passed to them, -# where as lfs-functions will use the $BIN_FILE environment variable. -# loadproc() and endproc() are just wrappers that pass everything on to -# the LSB defined functions. - -case "${1}" in - start) - #start_daemon "${BIN_FILE}" -arg1 -arg2 #... or: - loadproc -arg1 -arg2 -arg3 #... - evaluate_retval start - ;; - - stop) - #killproc -TERM "${BIN_FILE}" or: - endproc - evaluate_retval stop - ;; - - force-reload) - reloadproc -force - evaluate_retval force-reload - ;; - - restart) - $0 stop - $0 start - ;; - - status) - statusproc - ;; - -# reload and try-restart are optional per LSB requirements - reload) - reloadproc - evaluate_retval reload - ;; - - try-restart) - # Since this is optional there is no lfs-function for this one... - # might be at a later time if used enough, but I doubt it usefullness. - pidofproc "${BIN_FILE}" > /dev/null - if [ "${?}" -ne "0" ]; then - MESSAGE="${MESSAGE}: Not Running" - else - $0 stop - $0 start - exit 0 - fi - evaluate_retval try-restart - ;; - - *) - echo "Usage: ${0} {start|stop|{force-}reload|{try-}restart|status}" - exit 1 - ;; -esac - -# End /etc/init.d/template diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/udev b/bootscripts/contrib/lsb-v3/etc/init.d/udev deleted file mode 100644 index fd17b5e94..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/udev +++ /dev/null @@ -1,89 +0,0 @@ -#!/bin/sh -# Begin $rc_base/init.d/udev - -### BEGIN INIT INFO -# Provides: udev -# Required-Start: -# Should-Start: modules -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Populated /dev with device nodes. -# Description: Mounts a tempfs on /dev and starts the udevd daemon. -# Device nodes are created as defined by udev. -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -MESSAGE="Populating /dev with device nodes..." - -case "${1}" in - start) - if ! grep -q '[[:space:]]sysfs' /proc/mounts; then - echo_failure - boot_mesg -n "FAILURE:\n\nUnable to create" ${FAILURE} - boot_mesg -n " devices without a SysFS filesystem" - boot_mesg -n "\n\nAfter you press Enter, this system" - boot_mesg -n " will be halted and powered off." - boot_mesg -n "\n\nPress Enter to continue..." ${INFO} - boot_mesg "" ${NORMAL} - $FAILURE_ACTION - /etc/rc.d/init.d/halt stop - fi - - # If not using DEVTMPFS mount a temporary file system over - # /dev, so that any devices made or removed during this boot - # don't affect the next one. The reason we don't write to mtab - # is because we don't ever want /dev to be unavailable (such as - # by `umount -a'). - if ! mountpoint /dev > /dev/null; then - mount -n -t tmpfs tmpfs /dev -o mode=755 - fi - if [ ${?} -ne 0 ]; then - echo_failure - boot_mesg -n "FAILURE:\n\nCannot mount a tmpfs" ${FAILURE} - boot_mesg -n " onto /dev, this system will be halted." - boot_mesg -n "\n\nAfter you press Enter, this system" - boot_mesg -n " will be halted and powered off." - boot_mesg -n "\n\nPress Enter to continue..." ${INFO} - boot_mesg "" ${NORMAL} - $FAILURE_ACTION - /etc/rc.d/init.d/halt stop - fi - - # Create a symlink for POSIX shared memory - ln -s /run/shm /dev/shm - - # Udev handles uevents itself, so we don't need to have - # the kernel call out to any binary in response to them - # This is a failsafe and should be done in kernel config - echo > /proc/sys/kernel/hotplug - - # Copy the only static device node that Udev >= 155 doesn't - # handle to /dev (handled by default with DEVTMPFS) - if [ ! -f /dev/null ]; then - cp -a /lib/udev/devices/null /dev - fi - - # Start the udev daemon to continually watch for, and act on, - # uevents - /sbin/udevd --daemon - - # Now traverse /sys in order to "coldplug" devices that have - # already been discovered - /sbin/udevadm trigger --action=add - - # Now wait for udevd to process the uevents we triggered - /sbin/udevadm settle - evaluate_retval standard - ;; - - *) - echo "Usage ${0} {start}" - exit 1 - ;; -esac - -# End $rc_base/init.d/udev diff --git a/bootscripts/contrib/lsb-v3/etc/init.d/udev_retry b/bootscripts/contrib/lsb-v3/etc/init.d/udev_retry deleted file mode 100644 index 24b956ae0..000000000 --- a/bootscripts/contrib/lsb-v3/etc/init.d/udev_retry +++ /dev/null @@ -1,49 +0,0 @@ -#!/bin/sh -# Begin $rc_base/init.d/udev_retry - -### BEGIN INIT INFO -# Provides: udev_retry -# Required-Start: udev -# Should-Start: $local_fs -# Required-Stop: -# Should-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Replays failed uevents and creates additonal devices. -# Description: Replays any failed uevents that were skipped due to -# slow hardware initialization, and creates those needed -# device nodes -# X-LFS-Provided-By: LFS -### END INIT INFO - -. /lib/lsb/init-functions - -MESSAGE="Retrying failed uevents, if any..." - -case "${1}" in - start) - - # From Debian: "copy the rules generated before / was mounted - # read-write": - for file in /dev/.udev/tmp-rules--*; do - dest=${file##*tmp-rules--} - [ "$dest" = '*' ] && break - cat $file >> /etc/udev/rules.d/$dest - rm -f $file - done - - # Re-trigger the failed uevents in hope they will succeed now - /sbin/udevadm trigger --type=failed --action=add - - # Now wait for udevd to process the uevents we triggered - /sbin/udevadm settle - evaluate_retval standard - ;; - - *) - echo "Usage ${0} {start}" - exit 1 - ;; -esac - -# End $rc_base/init.d/udev_retry |