1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
# DS1302 Real Time Clock for the RC2014 computer
## The board
RomWBW has code to support a DS1302 Real Time Clock, enabling files to be timestamped and other timekeeping operations. This board implements the clock in a standard way for the RC2014.
## What can you use this for?
Telling the time :)
## Getting started with RomWBW
Set ```DSRTCENABLE``` to true in the configuration and rebuild your ROM image.
On startup you will see the time shown.
ZSystem has more complete support for time utilities than CP/M. After booting into ZSystem by pressing Z, Run ```ldds``` to load the resident time driver. ```td``` can then be used to set the time as well as view it.
In CP/M ```RTC.com``` can be used for querying and setting the clock but it is very basic.
## Jumpers
SW1 - Address configuration. For the default address of 0xC0, set switches 5 and 6 to on.
## Bill Of Materials
Reference| Value|Farnell part no|Rapid part no|Digi-key part no|
---------|------|---------------|-------------|----------------|
P1|1x39 right angled pin header|||732-5350-ND|
BT1|Keystone 106 20mm battery holder for CR2032|1650672||36-106-ND|
BT1|CR2032 battery|||P189-ND|
U1|CD74HCT688E COMPARATOR, SINGLE, PDIP-20|2407104||296-2131-5-ND|
U2|SN74HCT125N LOGIC, BUS BUFF TRI-ST QD, 14DIP|1739676||296-8386-5-ND|
U3|CD74HCT174E 74HCT CMOS, 74HCT174, DIP16, 5.5V|1105983||296-2100-5-ND|
U4|DS1302N+ RTC W/ RAM, 248B, D-D-M-Y, HH:MM:SS, DIP|2515367||DS1302N+-ND|
U5|SN74HCT32N IC, QUAD 2-INPUT OR, 74HCT32, DIP14|9591982||296-1615-5-ND|
C1-5|0.1uF MLCC capacitor|||BC2665CT-ND|
Y1|32.768 kHz crystal|9712887||535-9034-ND|
RN1|10k 8 Pin Commoned Resistor Network||63-0125|4608X-1-103LF-ND|
SW1|6 way DIL switch||80-0338|CT2066-ND|
U1|CONN IC DIP SOCKET 20POS TIN|||AE10015-ND|
U2|CONN IC DIP SOCKET 14POS TIN|||AE10012-ND|
U3|CONN IC DIP SOCKET 16POS TIN|||AE10013-ND|
U4|CONN IC DIP SOCKET 8POS TIN|||AE10011-ND|
U5|CONN IC DIP SOCKET 14POS TIN|||AE10012-ND|
## Construction tips
The footprint for the battery holder is designed for a Keystone 106, other battery holders should work if the pins are ~20.5mm apart, which seems to be fairly standard.
|
